| HS Code | 975863 |
| Product Name | TRITON Nonionic Surfactant X-405 |
| Chemical Family | Nonionic surfactant |
| Chemical Name | Octylphenol Ethoxylate |
| Cas Number | 9002-93-1 |
| Physical State | Liquid |
| Color | Pale yellow |
| Odor | Mild |
| Solubility In Water | Soluble |
| Ph Value | 5.0 - 8.0 (5% in water) |
| Boiling Point | >100°C |
| Flash Point | >200°F (93°C) (Closed cup) |
| Density | 1.06 g/cm³ at 25°C |
| Viscosity | 260 mPas at 25°C |
| Surface Tension | 29 dynes/cm (0.1% solution) |
| Hlb Value | 17.9 |
As an accredited TRITON Nonionic Surfactant X-405 factory, we enforce strict quality protocols—every batch undergoes rigorous testing to ensure consistent efficacy and safety standards.
| Packing | Triton Nonionic Surfactant X-405 is packaged in a 5-gallon (18.9 L) translucent plastic drum with secure screw cap closure. |
| Container Loading (20′ FCL) | Container Loading (20′ FCL): TRITON Nonionic Surfactant X-405 is typically packed as 16-18 metric tons per 20-foot container. |
| Shipping | TRITON Nonionic Surfactant X-405 is typically shipped in tightly sealed, chemically resistant containers, such as drums or totes, to prevent leaks and contamination. It should be transported according to regulations for non-hazardous chemicals, protected from extreme temperatures, and handled with proper personal protective equipment to ensure safety during loading and unloading. |
| Storage | TRITON Nonionic Surfactant X-405 should be stored in a cool, dry, and well-ventilated area away from heat sources, ignition points, and incompatible chemicals such as strong oxidizers. Keep the container tightly closed when not in use. Avoid freezing or exposure to direct sunlight. Use only approved containers, and label them clearly to prevent accidental misuse or contamination. |
| Shelf Life | TRITON Nonionic Surfactant X-405 typically has a shelf life of 24 months when stored in unopened containers at recommended conditions. |
As an established manufacturer, we provide TRITON Nonionic Surfactant X-405 to core industrial sectors where high-performance surface-active agents are essential for process reliability, product consistency, and regulatory compliance. Below, we detail real-world application scenarios, highlighting integration points, dosage guidance, operational quality measures, and end-use product types drawn directly from commercial-scale manufacturing practices.
In water-based emulsion polymerization of acrylic and styrene-acrylic polymers, formulators depend on X-405 to control particle size, ensure colloidal stability, and boost polymer conversion. The surfactant enters during monomer pre-emulsion preparation, delivering fine dispersion and reducing coagulum formation during polymerization. This use remains pivotal in producing stable latexes for high-performance paints, adhesives, and construction coatings.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Formulators utilize X-405’s high wetting power and detergency for formulating aqueous and semi-aqueous cleaning solutions in the metalworking and machinery sectors. The surfactant enhances oily residue removal, stabilizes bath compositions, and resists foaming in high agitation environments. It enters the formulation blending stage and remains stable under typical caustic or alkaline pH conditions.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Textile processors integrate X-405 in wetting and scouring blends to accelerate water penetration, facilitate complete removal of natural waxes, and promote fiber surface cleanliness prior to dyeing or finishing. It withstands boiling and high-alkaline conditions typical in garment and yarn treatment lines. This ensures uniform dye uptake and lowers defect rates in high-output dyehouses and textile finishing plants.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Agrochemical producers apply X-405 in the preparation of suspension concentrates (SC) and dispersible concentrates for crop protection products. Its well-balanced hydrophilic-lipophilic characteristics allow stable suspension of actives and maximize dispersion while minimizing foaming and drift. The surfactant is metered during wet-milling or pre-mix emulsification and remains stable through high-shear production.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Pulp & paper manufacturers employ X-405 in foam control compositions targeted for high-speed paper machines, coaters, and stock preparation tanks. It reduces surface tension rapidly and dissipates foam caused by entrained air or fines, maintaining web integrity and optimizing drainage. The surfactant blends well with mineral oil and fatty alcohols for robust defoamer concentrates and achieves quick knockdown in diluted use.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Users in industrial boiler, cooling, and RO membrane systems apply X-405 in dispersion and antiscalant formulations to ensure even distribution of inhibitors and minimize scale formation or system fouling. The surfactant is compatible with various chelating agents and dispersants, facilitating the stable performance of multi-component blends required for stringent industrial water quality management.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Competitive TRITON Nonionic Surfactant X-405 prices that fit your budget—flexible terms and customized quotes for every order.
For samples, pricing, or more information, please contact us at +8615365186327 or mail to sales3@ascent-chem.com.
We will respond to you as soon as possible.
Tel: +8615365186327
Email: sales3@ascent-chem.com
Flexible payment, competitive price, premium service - Inquire now!
In chemical processing, the value of a surfactant rests not on marketing claims but on what happens during the real, everyday tasks in the plant. TRITON Nonionic Surfactant X-405 has proved itself over years of hands-on use in thousands of batches here. We have worked with it across detergents, paints, coatings, and industrial water applications. There’s always a lot of talk about innovation in surfactants, but sometimes a product stands apart because it simply works where it counts the most—right in the tank or reactor. The experience using X-405 tells us more than datasheets or vendor flyers ever could.
TRITON X-405 comes from the TRITON family, well known for their consistency and reliability. X-405 stands out because of its high ethylene oxide (EO) content. It consistently offers a higher HLB value than standard nonionics, which directly influences solubility and interaction with oils. We see pronounced differences in how X-405 handles oily residues and heavy soils compared to other surfactants. With its higher EO chain, it dissolves and carries away hydrophobic materials that often persist through conventional cleaning steps. In our own formulary, we can boost cleaning power in water-based systems without increasing solvent content. That's a benefit you feel immediately, both in terms of product performance and cost.
Colleagues in our paints and coatings division trust X-405 because it brings and maintains pigment dispersions that sometimes break down using lower EO grades. One issue that happens with cheaper or generic surfactants is haze or separation over time. With X-405, the product stays brighter and more stable, and our operators don’t have to rework batches or handle complaints. We make these observations not just with one or two products—the same trend repeats across acrylics, alkyds, and latex batches. That kind of result is more valuable to us than any brochure promise or generic “suitable for numerous applications” language. Our repeated batch-to-batch success is the proof we look for as manufacturers.
With surfactants loaded with ethylene oxide, you expect higher viscosity. X-405 does show this trait, but we handle it well with our current pumps, mixers, and valves. We have put it through side-by-side trials with TRITON X-100 and X-114, both of which are widely used. X-405’s viscosity rises more sharply at lower temperatures yet remains flowable at standard room conditions. That’s a difference felt on the line, where operators depend on clean transfer and fast mixing, even in winter. The product remains consistent, and you don’t need to deal with plugging or heavy shearing during batch processing. This reliability helps reduce downtime in the plant.
In the warehouse, storage stability matters just as much. Countless times with lower grade or off-brand surfactants, you open up drums after a few months and find phase separation or strange odors. X-405 stays stable, with only minimal color change over longer periods. We don’t waste time rehomogenizing or scrapping lots. Having that predictability day after day makes a big difference for a large manufacturing site. Stability also matters downstream. Our customers use X-405-enhanced formulas in cleaning, textile, and even some food processing aid applications. If there were issues, we’d hear about it after the next cycle. Instead, X-405 does its job quietly and consistently.
Some clients ask why not select cheaper ethoxylated alcohols or other “equivalent” nonionics. From our experience, the answer circles back to performance in application and finished product quality. TRITON X-100, a close family member, works well for many general tasks. But as cleaning gets tougher or formulation shifts toward more challenging soils, X-405 reveals its strengths. In high-alkaline systems, for example, X-405 holds compatibility without causing cloudiness or unexpected phase breaks. Cheaper nonionics often show cloud points well below our typical batch temperatures, so they fall out during processing, especially in cold weather.
Field engineers often mention that when X-405 is part of the formulation, rinse-off and soil removal improve enough that we can reduce or shift other costly surfactants and solvents. For large-scale producers, these gains add up to major savings. A handful of cents per kilo matters when you run hundreds of batches every month. There is a temptation to chase one-off “cost savings” by substituting unknown generics, but the cost of blend separation, customer complaints, and extra cleaning usually wipes those savings out. That’s why, within our own operations, we specify X-405 where the margin for error is smallest.
In industrial cleaning, workers confront greasy, protein-laden soils every shift. Many products claim to be “broad-spectrum,” but only a few consistently outperform in real plant conditions. X-405, due to its long ethylene oxide chain, lifts oils and particulate soils better than most. Tank cleaning is one example. Some days, we run vegetable oil or petrochemical intermediates. Using X-405, operators see visibly faster tank turnover, less scouring, and faster rinsing. Customers in food, beverage, and dairy sectors notice this, too—the time saved on equipment turnaround allows more production and less downtime. Time and again, X-405 gives measurable savings on water and cleaning chemicals.
On the water treatment side, the high HLB value pays off in reverse emulsion breaking and oil-in-water separation. In places with floating oil residues or stubborn contaminants, X-405’s dispersive strength surpasses regular alkylphenol ether-based surfactants. This difference isn’t an academic point—it directly links to less carryover in wastewater and easier downstream purification. We measure lower COD and fewer foaming complaints after switching several lines from blended nonionics to pure X-405. This outcome benefits both our plant and partners, since we can honestly report improved performance to regulatory reviewers and customers alike.
A big part of modern chemical manufacturing involves quick reformulation as raw materials change or customer specifications shift. X-405 stands up across a surprising range of pH and temperatures in our process trials. Our R&D engineers treat it as a “safety net” ingredient—if a batch looks unstable or foamy with another surfactant, adding X-405 usually brings things back into line. We see this trait not just in cleaning blends but in emulsions as well. Some nonionics can destabilize systems, especially when combined with alcohols, solvents, or electrolytes. X-405's higher EO content helps tie down emulsions for longer, making it valuable in applications from textile scouring to agrochemical suspensions. We also use it to fine-tune cloud point in sensitive formulas—by incrementally substituting X-405 for lower EO grades, the final blend hits the right clarity and phase stability without extra fiddling.
Since most batches in our factories run on automated dosing systems, foaming can absolutely cripple a process. Some surfactants are notorious for uncontrolled foam, leading to overflows, loss of raw materials, and hazardous work conditions. In our blending and filling lines, X-405 demonstrates very controlled foaming. The foam it forms breaks down quickly after agitation. This lets us run faster line speeds and ensures cleaning systems don’t choke up partway through a batch. The value of that reliability compounds as volume increases. We’ve noticed, too, that operators prefer it—less mess on the shop floor, fewer urgent maintenance tickets, less time spent cleaning up spills or dealing with alarms.
We keep detailed records of every batch and every change in formula. Across five years of using TRITON X-405, we found reduced cases of raw material incompatibility, fewer batch failures due to phase breaks, and a measurable drop in customer complaints about final product separation. In one audit, the maintenance team pointed out that blending pumps running X-405 lasted longer before needing overhaul—less gumming up from product residue, less fouling on impellers. These are things that seldom make it into marketing materials because they’re grounded in the reality of manufacturing, not just lab tests. Still, over time, they make a clear difference to the bottom line.
We experimented with a variety of surfactants before settling on X-405 as the workhorse in a number of applications. The decision was rooted in process reliability, not just theoretical benefit. Customers demand stability that survives uncontrolled storage and careless transport, so we have to build resilience right into every drum. X-405’s track record of holding up to these real-world bumps, both in the lab and in field trials, stands out against others in its class. That’s why it turns up consistently in our own inventories and in many leading industry blends.
There is mounting pressure in industry to reduce hazardous solvent use and improve environmental profiles. Managers want to swap out older, less-friendly surfactants, but the alternatives cannot fall short in performance. In our own efforts to move away from solvent-heavy formulas, we have used X-405 to maintain cleaning power while dialing back on organic solvents. This not only helps with plant air quality and fire safety but also allows us to meet tightening wastewater standards for our sites. Customers with strong sustainability goals have called out X-405-based blends for their lower VOC emissions and improved residue rinsing. By adjusting formulas, we’ve also lowered chemical oxygen demand (COD) in discharged water, even where regulations keep getting stricter.
We do not claim X-405 is a wholesale replacement for every old-guard surfactant, but in the specific context of high performance, high-compliance plant environments, it bridges the gap between sustainability and output. We’ve tracked less worker exposure to strong-smelling residues and reduced intervention by plant health teams. Years of data confirm fewer maintenance callouts, less foam carryover, and better cleaning throughput for plants that switch, compared with those lingering on legacy surfactant systems.
Detergents, metal cleaners, textile wetting agents, and process aids: X-405 finds a spot in all these sectors, not because of a one-size-fits-all claim, but because it’s earned its place through daily reliability. We worked through a number of stubborn formulation puzzles where lower EO surfactants left oily streaks or allowed re-deposition. Swapping in X-405 fixed the problem. Customers in heavy machinery cleaning and food-grade sanitization both pointed to similar improvements. Each sector demands something different, but the central thread is X-405’s flexibility—better solubility for cleaning, better dispersion in paints, stronger emulsification in agrochemical carriers, and less foaming than most high-activity alternatives.
Where energy-intensive processes need thoughtful ingredient choices, X-405 plays well with the trend toward low-temperature washing. Lower washing temperatures inherently mean tougher cleaning, yet the right surfactant can offset this. In test runs across industrial laundry and food processing, X-405 allowed us to clean stubborn, fatty soils at lower temperatures, which means less steam use and energy demand. This change ripples out to lower utility bills, less boiler maintenance, and a smaller carbon footprint for the plant. Not every surfactant meets this test. From our experience, very few do as reliably as X-405.
Plant operators remember the jobs that go smoothly, and they remember the jobs where the formulation turned on them. After hundreds of runs using X-405, reports come back consistently positive. “Easy to handle,” “stable in storage,” and “fast tank clean-out”—we hear these phrases often enough to trust the feedback. We have trained new staff with X-405-based formulations, and induction time for getting the process right has gone down. Less variability means fewer line stops, and less paperwork chasing after failed batches or caked pumps. In sites where shifts overlap, plant managers prefer to stick with products and processes that don’t surprise them. This has made X-405 a mainstay in both our main production site and satellite contract facilities.
Quality assurance staff have a different set of concerns. Questions come in about product contamination and shelf life. X-405’s high EO content helps minimize unexpected microbial growth or odor, even without heavy preservative dosing. We have opened drums after months in storage—even in hot, humid warehouses—and found them in good shape. In small-batch jobs where we can’t rotate stock as often, that kind of consistency assures our downstream partners everything will run as planned, no matter which tank or drum gets picked next. Fewer surprises mean smoother workflow and stronger trust across the supply chain.
Manufacturing never stays the same. Product lines get updated, regulations change, supply chain challenges come out of nowhere. We have trialed dozens of new surfactant candidates, but few meet our internal test of “does it deliver every day, run after run?” Our process engineers track all deviations. Batches with X-405 show up again and again among those with the fewest rejects and the lowest incident rates. Field staff and QC teams give it high marks on documentation audits. This is not due to chance—it comes from a product designed and proven to work reliably during scale-up, not just in a beaker or demonstration booth.
Customers large and small report similar trends after switching to X-405-rich formulas. They see less downtime for cleaning, fewer out-of-spec blends, and better batch yields. Over the past few years, as customer requirements have grown stricter, the product’s performance still holds up. Whether the focus is cleaning efficiency, environmental profile, or mixing speed, our records and our customer audits confirm X-405 delivers in ways that set it apart from generic alternatives.
It’s easy to write catalog descriptions and pass around technical bulletins. What counts most in manufacturing is how ingredients like TRITON Nonionic Surfactant X-405 perform in the midst of actual production. Our day-to-day experience informs every decision: fewer failures means fewer wasted raw materials and less rework; reliable blending means line operators gain confidence; and customers see their own manufacturing run smoother. X-405 stands out for us not because of any abstract claim, but because it continues to earn its spot every single shift. That’s the difference we notice from the manufacturing floor to the final packaged product.