| HS Code | 668004 |
| Chemical Name | Alcohol Ethoxylate |
| Cas Number | 34398-01-1 |
| Appearance | Clear to hazy liquid |
| Color | Colorless to pale yellow |
| Odor | Mild |
| Active Content Percent | 99% |
| Ph 1 Solution | 6.0 - 8.0 |
| Density 25c G Per Ml | 0.99 |
| Pour Point C | -18 |
| Flash Point C | >93 |
| Solubility In Water | Dispersible |
| Hlb Value | 10.7 |
| Boiling Point C | >200 |
| Viscosity Cp 25c | 250 |
| Surface Tension Mn Per M | 29 |
As an accredited TERGITOL Nonionic Surfactant L-101 factory, we enforce strict quality protocols—every batch undergoes rigorous testing to ensure consistent efficacy and safety standards.
| Packing | Tergitol Nonionic Surfactant L-101 is typically packaged in a 55-gallon (208-liter) steel drum with secure, tamper-evident closure. |
| Container Loading (20′ FCL) | Container Loading (20′ FCL) for TERGITOL Nonionic Surfactant L-101: Typically 80-100 drums (200 kg each) per 20-foot container. |
| Shipping | TERGITOL Nonionic Surfactant L-101 is shipped in sealed, labeled containers, typically drums or pails, to prevent moisture and contamination. It should be stored and transported upright in a cool, dry, well-ventilated area, away from incompatible substances. Proper handling and safety measures must be observed according to DOT regulations and the product's SDS. |
| Storage | TERGITOL Nonionic Surfactant L-101 should be stored in tightly sealed containers in a cool, dry, and well-ventilated area away from direct sunlight, heat, and incompatible materials. Protect from moisture and freezing. Avoid storing near oxidizing agents and strong acids. Follow all applicable regulations and consult the Safety Data Sheet (SDS) for specific storage guidelines and precautions. |
| Shelf Life | TERGITOL Nonionic Surfactant L-101 has a shelf life of 24 months when stored in unopened containers under recommended conditions. |
As a dedicated manufacturer, we supply TERGITOL Nonionic Surfactant L-101 to professional industrial customers worldwide. Below we detail the primary downstream sectors utilizing this raw material, with a focus on their distinctive technical requirements, regulatory practices, formulation ratios, process incorporation points, and finished good outputs.
L-101 functions as a key nonionic emulsifier in the emulsion polymerization of acrylics and vinyl resins. Industrial producers depend on its high wetting and stabilizing capability to support uniform particle formation. This surfactant reduces coagulation risk during latex synthesis, especially in processes where broad temperature ranges occur. Its use directly affects monomer conversion rates and final latex stability, aligning with the precise needs of coatings, adhesives, and sealant manufacturers. Stringent quality requirements for particle size distribution and thermal aging in waterborne dispersions mandate accurate control of nonionic surfactant levels throughout the batch process.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
L-101 is incorporated in factory-scale formulations for hard surface cleaning agents in manufacturing plants, food processors (non-food contact), automotive assembly lines, and metal workshops. Its rapid wetting and soil removal properties enable formulators to disperse oily residues and fine particulates without generating excessive foam—preserving pump and spray nozzle function. Formulators optimize the balance between surfactant dosage and builder salts, such as sodium metasilicate or phosphates, to ensure residue-free rinsing on high-throughput cleaning lines. As chemical regulations on cleaning products tighten globally, end users demand a consistent, label-compliant input that performs across variations in water hardness and temperatures.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
L-101 is essential in wetting and scouring agents for textile pretreatment. Mills processing cotton, polyester, and blended fabrics rely on nonionic surfactants to penetrate fibers, remove sizing agents, and suspend oils from weaving. Accurate dosage ensures rapid wetting without excessive foaming, required for high-speed jet or overflow dyeing equipment. Compliance with ecological and safety directives for dyestuff auxiliaries, especially in European and Chinese textile clusters, drives product selection towards surfactants with rapid biodegradability and minimal aquatic toxicity. Our technical support team routinely assists with on-site dosage and wastewater management optimization for textile processors aiming for consistent whitening and dye leveling.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
The use of L-101 in crop protection manufacturing ensures proper dispersion, wetting, and stability of active ingredients in suspension concentrate and soluble liquid formulations. Agrochemical formulators require strict control over the rheology and particle size of suspensions to maximize active ingredient efficacy and reduce sedimentation during storage. Surfactant choice must comply with residue limits for food crop use, as well as support the safe handling profile necessary for application by commercial farmers. Surfactant acts as a key adjuvant, improving leaf surface coverage and rainfastness, directly impacting product performance in the field. Our supply partners integrate this raw material in process lines subject to regulatory audits and batch traceability mandates.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
L-101 assists in stabilizing emulsions and reducing surface tension in aqueous metalworking fluids, enabling superior cooling and lubrication for precision machining and abrasive cutting operations. Industrial coolant compounders must maintain stable fine oil droplets under recirculation and high-pressure application, to extend sump life and reduce tramp oil formation. Surfactant selection influences bioresistance, foam control, and rinse-ability, all critical for compliance at automotive, aerospace, and metal fabrication sites. The raw material’s steady performance in hard water and compatibility with common corrosion inhibitors make it a preferred choice for coolants subject to stringent plant maintenance and wastewater discharge guidelines.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
L-101 integrates as a wetting and demulsification agent in oilfield production and separation chemicals. Oilfield chemical formulators use this raw material to target rapid phase separation of oil, water, and solids during primary and secondary oil recovery. Surfactant concentration balances rapid emulsion breaking with controlled water clarification, meeting operational goals for crude dehydration and pipeline transport efficiency. Compatibility with brine, high salinity, and variable temperatures makes precise surfactant blending critical in formulation runs. Surfactant performance is routinely validated through bottle tests and field implementation in accordance with major petroleum operator specs, often under strict traceability records for HSE audits.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Competitive TERGITOL Nonionic Surfactant L-101 prices that fit your budget—flexible terms and customized quotes for every order.
For samples, pricing, or more information, please contact us at +8615365186327 or mail to sales3@ascent-chem.com.
We will respond to you as soon as possible.
Tel: +8615365186327
Email: sales3@ascent-chem.com
Flexible payment, competitive price, premium service - Inquire now!
Our team works with nonionic surfactants every day, and among the many grades, TERGITOL L-101 stands out as an effective tool for both industrial and household formulations. Speaking from years of batching, blending, and scaling up countless surfactant projects, TERGITOL L-101, with its clear, nearly colorless liquid profile, handles tough substrates without harshness. Manufactured under consistent operational controls and quality checks, it arrives as a liquid from the factory, so the product goes easily into water or solvent blends, cutting out the trouble of heating or extra agitation at the production line.
Surfactant specialists who formulate for paints, coatings, textiles, cleaners, or agrochemical blends will notice that L-101 offers a much lower foam profile than many popular ethoxylates. You see this difference after simple shake tests: solutions with L-101 settle quickly, while several competing polyethylene glycol chains leave lingering suds on top. For applications where persistent foam becomes a liability—automatic washing lines, high-throughput plant washes, recirculating rinse tanks—this low-foam performance translates directly to improved equipment uptime and less intervention downstream.
Another overlooked trait involves alkali and acid stability. Plenty of general-purpose nonionics start out strong but break down, haze, or lose clarity under high-pH (caustic) or acidic (pickling) conditions. Repeated stress tests in our lab simulating closed-loop cleaning and bottling lines proved L-101 keeps its clarity and cleaning edge over repeated cycles, which serves both industrial formulators and cleaning technology specialists who cannot afford performance drift batch to batch.
Over the years, we have supplied L-101 to operations in metal cleaning, food-processing sanitation, paint detackification, agricultural tank-mixes, glass bottle washing, and, more recently, precision electronic parts cleaning. Plant managers came back to us pointing to consistent surface wetting, effective grease cutting even at dilution, and that crucial low-foam profile, especially as water conservation mandates keep pushing for closed-loop equipment washes.
Regular plant trials revealed L-101 maintains surface tension reduction across a variety of water qualities: hard well water, recycled waters, and even saline-laced streams used by food or beverage processors. Some surfactants falter under these challenging backgrounds, leaving residues behind or washing out without effect. L-101 wets every nook and cranny, releasing soils and residues. In glass bottle reclaim plants, it prevents stubborn label glue residues from gumming up filtration screens—and unlike many alcohol ethoxylates, doesn’t cause clouding or haze, especially under cold temperature conditions.
Sometimes end users ask about using L-101 in hard-surface cleaners or institutional degreasers, comparing it to standard nonionics like NP-9 or TX-100, but wishing for something less aggressive on surfaces and hands. L-101 stirs in smoothly, doesn’t separate on standing—even in high-electrolyte concentrates—and extends shelf life by resisting unwanted phase splits or precipitates common with lower-cost alternatives. This consistency saves money on rework and keeps customer complaints at bay.
Inside the factory, staff monitor each production run of TERGITOL L-101 for active content (ethoxylate chain distribution), moisture control, pH balance, and pour point. Based on decades running bulk surfactant reactors, small tweaks in ethylene oxide addition and temperature profile greatly affect the final performance in real-world downstream blends. L-101 holds a narrow average ethoxylate range with a balanced hydrophilic–lipophilic character, which is why formulators observe rapid wetting and good grease penetration at low use-levels—often between 0.1% and 1.0% by weight, depending on the task.
L-101 stays pumpable at room temperature, making it far easier to unload, drum, or meter into mixing tanks—no stubborn waxy or semi-solid phase to fight against. Bulk users feeding automatic dosing units will appreciate this point; pumps no longer clog, and turnover times speed up for large batches. Our drum-filling teams report that product starts clear and remains clear, so finished goods pass visual inspection without extra handling.
From a compliance point of view, TERGITOL L-101 does not introduce persistent organic pollutants, heavy metals, or significant secondary contaminants. Many buyers in environmental cleanup or regulated cleaning sectors seek out lower AOX (adsorbable organic halides) and low aquatic toxicity. L-101 meets these benchmarks, backed by long-term bioelimination and aquatic risk analysis done in cooperation with external labs.
Market newcomers sometimes mistake L-101 for generic C9–C11 ethoxylates or household cleaners based on older nonylphenol or linear alcohol blends. Our process chemists remind buyers that L-101 steers clear of the persistent and hormone-mimicking profile of nonylphenol types, which have growing regulatory bans in Europe and North America. Downstream users appreciate this, especially those selling into food, beverage, or high-value technical markets.
Looking at the raw numbers, L-101 delivers a moderate hydrophilic–lipophilic balance (HLB) value in the mid-teens, making it suitable for both oil-in-water and water-in-oil systems, provided that blending conditions support good dispersion. Against similar HLB competitors like ethoxylated secondary alcohols, L-101 often exhibits lower color, less odor, and more batch-to-batch stability. Anyone formulating perfumes, clear coatings, or high-purity cleaners benefits here: fewer off-notes, no unexpected color drift, and longer shelf stability at the warehouse.
If you compare L-101 to shorter-chain alcohol ethoxylates, it outperforms in emulsifying mineral oils, silicone defoamer carriers, and release agents. The molecule’s chain length handles greasy soils without aggressive stripping, helping cleaning formulations to rinse free while preserving delicate substrates, such as painted parts, aluminum, or sensitive polishes. Our pilot lab often runs comparative QSARs and wetting rates, and L-101 regularly completes cycles with no surfactant filming left behind.
Some customers ask about environmental aspects. L-101 possesses a more favorable aquatic toxicity profile than traditional nonylphenol blends and maintains high biodegradability. Wastewater treatment operators at contract laundry facilities, as well as large-scale bottle washers, benefit from this footprint—plant effluent stays within discharge norms, and fewer compliance headaches crop up during inspections.
On the factory floor, both seasoned line operators and new hires prefer L-101’s liquid format. Pouring and mixing tasks proceed rapidly—no need for melting steps, and cleaning transfer lines becomes manageable with standard plant water. As orders grow for concentrated surfactant blends, our filling team cuts batch turnaround using L-101 as a base component, since it doesn’t layer or cord at the top once drums rest in the warehouse. Over hundreds of totes processed, we’ve not seen phase splits provided standard care is taken during blending and hydration.
In open-top blend stations for institutional cleaning products, L-101 beats several alternatives because of its mild profile. Many employees comment on the absence of the sharp, almost ammonia-like fumes that come from poorly deodorized ethoxylates. Finished cleaners and degreasers keep a neutral scent, minimizing complaints in facilities where concentrated product is loaded directly to dispensers by staff.
Many users blend L-101 with anionic or amphoteric surfactants to target stubborn soils. L-101 helps cut hard water scum and mineral residues found in glassware, engines, or food processing lines. Our application team has seen less “bloom” or phase separation as water cycles through hard-to-soft shifts, compared to shorter-chain surfactants prone to precipitation. This trait keeps bottled products clear, even as temperatures fluctuate or storage times extend in less-than-ideal warehouse conditions.
We see increasing demand among agricultural suppliers mixing pesticides, adjuvants, and foliar fertilizers. In tank-mixed sprays, L-101 keeps active ingredients in suspension—critical in nozzles to ensure thorough application across crops. Field reports show uniform leaf coverage across variable water qualities, with noticeably less residue on nozzle filters. Farmers and contract sprayers value this performance, as it decreases labor on the field and machine downtime due to clogging.
Our quality assurance team tests every lot of L-101 using both in-house instrumentation and third-party analytical labs. Typical metrics include cloud point, active ingredients, pH, color (APHA scale), and low-level residuals, validated against industry standards. We’ve learned over decades to maintain a transparent batch release process, documenting all properties so end users receive honest and consistent product—no hidden blend changes, unwanted additives, or off-spec deliveries. Longtime partners comment on this reliability; their process tweaks and troubleshooting go smoother because they know exactly what’s in each shipment.
Requests for additional compliance documentation—REACH, California Prop 65, or biobased certificate support—are handled promptly. Beyond the paperwork, we work directly with customer regulatory teams, sharing test validations and technical details so their downstream certification requirements see no delays.
The market for nonionic surfactants keeps shifting, with regulatory agencies growing more aggressive in phasing out persistent and hazardous variants. Thanks to TERGITOL L-101’s compliance with current norms and future-ready profile, customers in Europe, North America, and Asia-Pacific use it as a cornerstone in modern blends. We routinely gather field feedback and revalidate performance, especially as alternate feedstocks or new environmental rules come into play. Customers note how L-101 supports concentrated blends for automatic line dosing, creates clear and shelf-stable products, and meets the evolving aims for lower environmental impact.
In industrial cleaning, bottling plants highlight trouble-free dosing and a low-odor footprint, while paint and coatings formulators credit the surfactant with maintaining gloss and clarity in final coatings. We hear similar results from laundry and institutional cleaning manufacturers, who see fewer end-user complaints about film, residue, or unwelcome fragrance absorption. Some agricultural suppliers have even switched from older polyglycol types to L-101 after seeing less buildup in spray tanks and reduced maintenance on pumps, nozzles, and lines.
We continue improving L-101 production by focusing on consistency. Our reactor operators track product parameters in real-time and respond quickly to ensure every drum meets the performance targets needed by our customers. For technical support, our application chemists are available to answer questions that arise during scale up, such as compatibility with other surfactants, process maturation time, or challenging water conditions.
In our experience, products that earn customer loyalty combine real-world performance, reliability of supply, and ongoing technical service by people who understand not just the chemistry but also the realities of plant floors and formulator labs. TERGITOL L-101 has found persistent demand by delivering on these points, helping customers gain value in both routine and demanding applications.
TERGITOL Nonionic Surfactant L-101 is a result of hands-on manufacturing experience, attention to quality, and a commitment to responsible chemical stewardship. Designed for demanding users in cleaning, formulation, and process industries, it answers the need for a mild, low-foaming, biodegradable nonionic surfactant that blends and stores predictably, resists batch-to-batch drift, and outperforms standard alternatives in practical settings. Regular dialogue with customers, constant process investment, and a focus on compliance ensure that L-101 remains a preferred choice as markets and expectations grow.