| HS Code | 141526 |
| Chemical Name | TERGITOL Nonionic Surfactant 15-S-9 |
| Appearance | Clear to slightly hazy liquid |
| Chemical Family | Alcohol Ethoxylates |
| Cas Number | 68131-40-8 |
| Hlb Value | 13.3 |
| Active Content | Approximately 100% |
| Molecular Weight | Approximately 603 g/mol |
| Pour Point | Approximately 17°C (63°F) |
| Density | 1.03 g/cm³ at 25°C |
| Flash Point | >200°F (93°C) (PMCC) |
| Solubility In Water | Soluble |
| Ph 1 Percent Solution | 6.0-8.0 |
| Viscosity | 110 cP at 25°C |
| Surface Tension | 29 dynes/cm at 0.1% solution |
| Biodegradability | Readily biodegradable |
As an accredited TERGITOL Nonionic Surfactant 15-S-9 factory, we enforce strict quality protocols—every batch undergoes rigorous testing to ensure consistent efficacy and safety standards.
| Packing | TERGITOL Nonionic Surfactant 15-S-9 is packaged in a 55-gallon drum, with clear labeling and manufacturer information displayed. |
| Container Loading (20′ FCL) | 20′ FCL (Full Container Load) holds about 15-16 metric tons of TERGITOL Nonionic Surfactant 15-S-9 in standard drums. |
| Shipping | TERGITOL Nonionic Surfactant 15-S-9 is shipped in tightly sealed, chemical-resistant containers, typically drums or pails, to prevent leaks and contamination. It must be handled in accordance with local and international regulations, including appropriate labeling and documentation. Store and transport in cool, dry, well-ventilated areas away from incompatible substances. |
| Storage | Store **TERGITOL Nonionic Surfactant 15-S-9** in a tightly closed container in a cool, dry, and well-ventilated area, away from incompatible substances such as strong oxidizing agents. Protect from heat, direct sunlight, and moisture. Ensure containers are clearly labeled and kept away from sparks and open flames. Follow all relevant safety, handling, and environmental guidelines for storage. |
| Shelf Life | TERGITOL Nonionic Surfactant 15-S-9 typically has a shelf life of 24 months when stored in unopened, original containers. |
As a chemical manufacturer with direct process experience, we supply TERGITOL Nonionic Surfactant 15-S-9 to downstream producers across several sectors needing controlled wetting, detergency, or emulsification. The following industrial use cases reflect actual demand, regulated process design, and finished end-product requirements.
Emulsion polymer manufacturers utilize this surfactant as a primary nonionic surface-active agent in latex synthesis of styrene-acrylic and vinyl-acetate copolymers. Its ethoxylate chain length supports the stabilizing micelle formation required for particle size control and monomer conversion efficiency. This material works across both batch and semi-continuous reactors, supporting binder products for architectural coatings, adhesives, and paper saturation with strict monitoring of ionic contamination. The product enters directly at the initial aqueous monomer emulsion stage, requires monitored dosing to avoid secondary agglomeration, and supports low foam profiles without added antifoam.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Professional-grade cleaning detergent manufacturers apply 15-S-9 for its strong wetting, rapid soil penetration, and stability in alkali and hard water environments. Industrial surface cleaning operations, such as metal fabrication and fleet washing, rely on its nonionic character to avoid ionic build-up on equipment and maintain rinseability. Blenders dose this material during the aqueous phase of liquid cleaner compounding, ensuring compatibility with non-phosphate builders, hydrotropes, and solvents. Downstream, finished detergent concentrates undergo batch QC for foam, clarity, and Ca/Mg salt tolerance according to local regulatory approval.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
In textile finishing plants, this surfactant serves as a primary wetting and scouring agent for processing cotton, polyester, and blended fibers. Its quick surface activity allows size, wax, and lubricant removal at lower temperatures and moderate pH without fiber damage. Operators add it to continuous or batch washers, usually following alkali or peroxide charge. The surfactant’s high cloud point supports efficient rinsing and minimal residue in open width, rope, or jet dyeing set-ups. End users demand consistency in performance as detected by residual surfactant testing in post-wash effluent streams.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Agrochemical producers incorporate this nonionic surfactant as a key adjuvant in EC pesticide concentrates. Its emulsification capacity permits stable blending of hydrophobic actives with hydrocarbon solvents and water, reducing droplet coalescence and ensuring targeted plant application. Formulators carefully control the surfactant-active ratio to avoid phytotoxicity and assure tank-mix stability in diverse water chemistries encountered by farm workers. Compatibility and field performance require batch testing to FAO and crop-specific regulatory protocols before release.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Oilfield chemical specialists employ this nonionic surfactant in water-based drilling and workover fluid systems to disperse clay, reduce torque, and prevent bit balling. Its ability to lower interfacial tension assists well cleaning and cuttings suspension without excessive foaming or interference with brine salts commonly present in mud systems. The material enters during mud mixing, with field engineers adjusting dosage according to downhole temperature, water hardness, and degree of clay hydration. Field trials verify dispersion and lubricity in dynamic drilling environments.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Metalworking fluid compounders include this surfactant in the aqueous and semi-synthetic lubricating systems for cutting, grinding, and forming operations. It forms stable oil-in-water emulsions with mineral and synthetic oil bases, ensuring coolant clarity and consistent lubricity under heavy load. Addition rates depend on fluid hardness, sump volume, and the presence of extreme-pressure additives. Downstream blending requires in-process pH and emulsion droplet stability tests aligned with industrial end-user requirements for long-term machine operation.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Competitive TERGITOL Nonionic Surfactant 15-S-9 prices that fit your budget—flexible terms and customized quotes for every order.
For samples, pricing, or more information, please contact us at +8615365186327 or mail to sales3@ascent-chem.com.
We will respond to you as soon as possible.
Tel: +8615365186327
Email: sales3@ascent-chem.com
Flexible payment, competitive price, premium service - Inquire now!
In our manufacturing facility, TERGITOL 15-S-9 emerges from a process that brings together decades of hands-on experience and investment in technology. Surfactants like this one aren’t churned out by formula alone; their real-world consistency and reliability depend on every step, from sourcing raw alcohols to controlling the length and content of ethoxylation. The 15-S-9 model, built from a C11-15 alcohol backbone and capped at an average ethoxylate molar value of 9, finds its particular balance by design, not by chance.
Operators in our plant know how sensitive these reactions can be. Watch the viscosity at the wrong temperature and you get an off-spec batch. Let the ethylene oxide ratio drift, and customers downstream can’t predict their foam levels or cleaning power. We learned early that keeping our oxygen feeds and reactor coolers in precise trim isn’t just a nice-to-have — it’s necessary, batch after batch. So the quality you read about in a batch certificate comes from machine settings and years of lived, sometimes hard-earned, know-how.
Not all nonionics behave the same way, despite trade names and similar-sounding numbers. TERGITOL 15-S-9 gives formulators high cloud point, low pour point, and strong wetting, but what you notice in the factory is its clear, moderate viscosity liquid that pours easily at room temperature. Some end-users coming from lauryl or shorter-chain nonionics notice 15-S-9 doesn’t gunk up at lower temperatures and won’t solidify in cooler warehouses — a major relief for bulk handlers and warehouse teams in colder regions.
On the technical side, you hear a lot about the “H-L-B” system, but nothing replaces trial runs in real equipment. 15-S-9 has a preferred zone for emulsifying oily soils and solubilizing hard-to-wet pigments. Speaking with coatings manufacturers over the years, we found they valued our product’s compatibility with high-pigment loads and ability to avoid haze development in waterborne systems. Textile mills and industrial laundry engineers tell us blends still flow and rinse clear, even in hard water, with less risk of residue or fabric graying.
Behind the product name, manufacturers recognize 15-S-9 as a nonionic surfactant featuring an average of nine ethylene oxide units linked to a linear C11-15 alcohol base. This structure drives the balance between strong grease-cutting and easy rinsing. Our QC labs keep the water content tight to guarantee consistent performance, and we monitor free alcohols to prevent unwanted odors or skin irritation — key for both household and I&I applications.
Over the years, cleaning formulator teams called about the narrow cloud point range. Consistency here isn’t trivial; too high, and mix clarity suffers, too low and you risk precipitation. For 15-S-9, this means steady, defined separation point — crucial for workers who run large reaction kettles or set up tanker transfers. From a safety angle, we check peroxide and aldehyde content, since leaving oxidative residues can trigger unwanted reactions down the supply chain, especially for gentle detergents and emulsion polymers.
In site visits with industrial blenders, we see 15-S-9 poured into drum mixers to prewet powders, improve flow of pigments, and break down complex oil blends fast. Large-scale detergent plants depend on liquid nonionics like 15-S-9 when targeting foam control in low-foam dishwasher or bottle-wash detergents. The blending line operators prefer this grade for its predictable handling — no hidden clumps, no surprise viscosity spikes, even in sealed pump lines.
Industrial and institutional cleaning professionals using this surfactant get more than a generic nonionic. The C11-15 chain brings enough hydrophobic “push” for tough soils, but the ethoxylate content steps up solubility, so formulated products wash out in one rinse and leave less residue. Paper and pulp mills report improved de-inking in recycle operations. I’ve walked through plants using anonymous nonionics and watched as clogs and separate layers waste hours — with 15-S-9’s design, that scenario’s rare.
Customers often ask how 15-S-9 stacks up to other grades like 15-S-7 or more traditional surfactants like NP-9 or lauryl alcohol ethoxylates. Our answer relies on process history as much as paperwork. 15-S-7, with a lower ethoxylate count, brings in better wetting but less solubility and may haze in cold blends. More hydrophobic, it’s popular in textile lubricants. 15-S-9, on the other hand, fits in where cloud point and clarity mean everything — like glass cleaners or hard-surface cleaning concentrates that need to stay clear and mobile on the shelf and during use.
Compared to older nonylphenol ethoxylates, 15-S-9 offers several environmental and health-focused advantages. Its alcohol-based structure improves biodegradability. Safety managers prefer it as regulations tighten on phenol derivatives. In our plant, we retooled old process lines to swap away from nonyl materials as demand moved toward safer alternatives.
Lauryl alcohol ethoxylates fill a niche for high-foam hand wash and shampoos. 15-S-9’s moderate foam means you see it more in automated, mechanical systems where over-foaming clogs nozzles or tanks. We’ve helped customers transition by tweaking dosing rates and blend partners. Factories running high-speed filling lines appreciate the reduced foam, which speeds bottling without short-filling or splashing over.
Supplying bulk users means the quality story starts long before a product reaches an end label. Supply chain managers know one off-spec batch means disrupted production, missed shipment deadlines, and frustrated workers at bottling lines. In our plant, that means every tote of 15-S-9 receives batch-by-batch verification for cloud point, color, water content, and active content. We don’t just check a sample once; we run quick-scans and retain samples to spot any drift over calendar quarters.
For custom blenders, a clean, easily pumpable liquid keeps mixing times predictable. Thermal control matters — if a 20-ton tank cools by two degrees, a less stable surfactant would start gelling up or developing layers. Years back, a customer’s warehouse chiller failed over a long weekend, and their 15-S-9 drums came through without separation, which kept their plant running through a fix. Our technical team follows up on these stories to guide adjustments should a spec requirement come up repeatedly.
Shipping professionals and warehouse operators trust 15-S-9 for its balance of pour point and viscosity. Whether filling 200-liter drums or bulk ISO tanks, this surfactant moves through lines without the headaches of high-wax or out-of-spec nonionics. Our drums leave the plant capped for minimal air exposure, reducing peroxide development and maintaining chemical stability during long-term storage.
Over the years, our technical support engineers have visited a range of manufacturing sites using 15-S-9 in everything from water-based paints to hard-surface cleaners. Paint shops choose 15-S-9 to disperse tough pigment loads and enhance gloss, without introducing haze. Resin manufacturers use it to stabilize polymer suspensions. In both cases, precise dosing brings out the product’s strengths: dispersing without excess foam, and rinsing cleanly even under hard water or high pH.
Carpet cleaning specialists require wetting performance that doesn’t trap detergents within piles. On-site trials showed that using 15-S-9 lets the extraction machines lift more soil and leave less behind, which reduced upcalls for re-cleaning. That same wetting power lets agrochemical blenders distribute actives throughout a variety of complex mixtures, from oils to solids, and keep spray tanks stable through mixing and application.
Paper and pulp recycling plants, always pressed to limit downtime, rely on products like 15-S-9 to keep deinking processes efficient while reducing the amount of non-biodegradable waste entering effluent. Over the years, process managers have reported improved ink removal and fewer issues with tank residuals. Food plant sanitisers prefer this specific ethoxylate design for its light odor, compatibility with strong oxidizers, and near-neutral effect on detergent pH.
Manufacturing surfactants brings responsibility. From day one, we built rigorous electrolyte removal and water treatment into our process to keep trace metal and salt content low. Customers in regulated markets ask for product with minimal contamination risk—not just for their own quality, but to reduce environmental carry-through. In our teams, regular safety drills and ongoing analysis guarantee that even as production volumes scale, standards don’t slip.
TERGITOL 15-S-9 presents low toxicity by design and quickly degrades under aerobic conditions. Many national and multinational brands choose this surfactant as part of their move away from more persistent chemicals. As fresh regulatory requirements arrive, feedback from customer audits tells us having a product rooted in compliance isn’t negotiable; it’s expected for continued market participation.
Worker safety doesn’t stop at REACH SVHC or TSCA lists. Our in-plant protocols include continuous air monitoring for vapor hazards and skin exposure. Training downstream handlers on proper PPE use and what to do if unexpected skin or eye contact occurs forms part of our commitment to real-world safety. Our product stewardship experts take queries from processors and blenders needing transport or workplace guidance, and we frequently participate in industry roundtables on safe use, packaging reuse, and responsible disposal.
Markets never wait: customers demand answers on performance, handling, or new blend ideas daily. Sometimes that means quickly running new cloud point values for a custom blend, or advising a customer who discovered unusual mixing results. Having production, QA, and technical support on the same site speeds our response. More than once, our team has isolated a brown tint to inlet valve debris before a full shipping run—saving everyone time and cost.
In logistics, port delays and shifting regulations mean we keep extra buffer stock, backed by real-time demand tracking and regular supplier meetings. If raw material costs fluctuate, plant managers routinely review formulas and run risk assessments to keep pricing stable for customers. This continuity depends on deep knowledge of both process chemistry and market pressure points—a view built from day-in, day-out engagement, not speculation.
Environmental standards climb higher every year. To adjust, we keep pilot reactors running to test blend modifications using alternate alcohol sources and look for catalytic route improvements to reduce by-products. Our R&D teams collaborate with customers testing new downstream uses—from seed coatings to eco-friendly hard-floor renovators—so that TERGITOL 15-S-9 keeps fitting into tomorrow’s as well as today’s standards.
Product specs only matter if they come with trust and context. Plant visits, batch samples, and detailed analytics create the confidence that makes nonionic surfactants like 15-S-9 central to so many industries. End-users want reliable performance, safety assurance, and honest dialogue about sourcing, sustainability, and compliance. We take that to heart: by keeping lines open from order to application support, we share the experience that built our reputation.
Through every shift and every tank filled, what counts is consistent delivery: product that reaches the dock, blends without trouble, and works as promised. TERGITOL 15-S-9 isn’t just a model or a specification. It’s a surfactant produced by people who manage process heat, storage inventories, and evolving customer demands every day, and who know their work stands on the results customers see through every formulation, shipment, and finished product.
Listening to the needs of formulators, blenders, and users remains our key priority. Over the past decade, water stewardship and minimizing carbon footprint have risen up the agenda. We keep close watch on both supply chain changes and advances in green chemistry, so our plant continues to meet today’s challenges and tomorrow’s innovations. Working side-by-side with customers, we share not only a product, but also the confidence that comes from knowing your inputs work as hard as you do.
TERGITOL Nonionic Surfactant 15-S-9 is more than a specification or a sales pitch—it reflects years of direct manufacturing experience, the steady improvement of process control, and an ongoing commitment to both safety and application results. In a sector where every blend, mill, or cleaning line depends on what comes out of each drum, we put our name and experience into every batch.