| HS Code | 562075 |
| Chemical Name | TERGITOL Nonionic Surfactant 15-S-12 |
| Cas Number | 68131-40-8 |
| Appearance | Clear to slightly hazy liquid |
| Odor | Mild |
| Color | Colorless to pale yellow |
| Active Content Percent | 98% |
| Hlb Value | 14.0 |
| Molecular Weight | Approximately 674 g/mol |
| Boiling Point | Above 200°C (estimated) |
| Solubility In Water | Soluble |
| Density | 0.97 g/cm³ at 25°C |
| Viscosity | 140 mPa.s at 25°C |
| Surface Tension | 29 dynes/cm at 0.1% solution |
| Pour Point | <-10°C |
| Flash Point | >200°C (Pensky-Martens Closed Cup) |
As an accredited TERGITOL Nonionic Surfactant 15-S-12 factory, we enforce strict quality protocols—every batch undergoes rigorous testing to ensure consistent efficacy and safety standards.
| Packing | TERGITOL Nonionic Surfactant 15-S-12 is packaged in a 5-gallon (18.9 L) blue plastic drum with secure screw cap. |
| Container Loading (20′ FCL) | The 20′ FCL container typically loads 16–18 metric tons of TERGITOL Nonionic Surfactant 15-S-12, packed in 200 kg plastic drums. |
| Shipping | **Shipping Description:** TERGITOL Nonionic Surfactant 15-S-12 is typically shipped in tightly sealed, labeled containers such as drums or pails to prevent leakage and contamination. It should be transported upright and protected from extreme temperatures. Ensure compliance with all applicable local, state, and international shipping regulations for chemical substances. |
| Storage | TERGITOL Nonionic Surfactant 15-S-12 should be stored in a cool, dry, well-ventilated area, away from heat, sparks, open flames, and strong oxidizing agents. Keep the container tightly closed when not in use. Avoid freezing and prolonged exposure to direct sunlight. Use original packaging or containers compatible with the product’s chemical properties to prevent contamination or degradation. |
| Shelf Life | TERGITOL Nonionic Surfactant 15-S-12 has a typical shelf life of 2 years when stored in original, unopened containers. |
As a direct chemical manufacturer, we supply Tergitol 15-S-12 to multiple specialized industries, providing support for applications that require precise surfactant function in processes including polymers, metalworking, agrochemicals, textile auxiliaries, oilfield chemicals, detergents, and pulp & paper production. Each sector integrates this material to enhance efficiency, wetting, cleaning, or emulsification, according to strict process controls and compliance expectations.
Polymer emulsion producers utilize Tergitol 15-S-12 as a primary nonionic emulsifier during aqueous production of acrylics, styrene-butadiene latexes, and vinyl acetate dispersions. It releases early during pre-emulsification, enabling uniform monomer droplets, stable latex formation, and particle size control. The surfactant's broad compatibility supports colloidal stability and freeze-thaw resistance during scale-up, with adjustments according to monomer and co-surfactant ratios. Our product passes strict quality assurance to avoid side reactions and ensure batch reproducibility.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Industrial metal finishing and machining rely on Tergitol 15-S-12 as a key nonionic component in synthetic and semi-synthetic coolants, as well as alkaline industrial cleaners. Its chemical structure ensures stable foam profiles and wetting action, crucial for parts degreasing, bath longevity, and residue minimization on ferrous and non-ferrous components. The surfactant enters during fluid blending, with concentration fine-tuned for maintenance of detergency without excessive foam in automated spray systems. Batch records and on-line logging are maintained to demonstrate compliance and traceability.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Agrochemical formulators deploy Tergitol 15-S-12 in pesticide and herbicide concentrates, especially in oil-in-water emulsifiable concentrates (ECs) and suspension concentrates (SCs). Its role centers on emulsifying active ingredients, particularly those based on synthetic pyrethroids or triazole fungicides, ensuring stable dispersion and shelf-life under variable storage conditions. Strict compliance with maximum residue levels, active solubility, and anti-caking is required. Surfactant ratios are recalibrated for oil phase load and required emulsion droplet size as measured in QC labs.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Tergitol 15-S-12 supports textile finishing plants as a scouring and wetting agent for natural or blended fibers prior to bleaching and dyeing. Its rapid penetration accelerates removal of natural waxes, spinning oils, and other hydrophobic contaminants, preparing fabrics for even color uptake and brightness. Manufacturing adherence focuses on effluent load, APEO-free standards, and specific process flows for batch, jet dyeing, or continuous systems. We maintain tight control of input concentrations, adapting dosage for fabric GSM and equipment load capacity, backed by in-line QC for wetting time and uniformity.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Oilfield service companies use Tergitol 15-S-12 in drilling muds, fracturing fluids, and production chemicals to improve wetting, lower interfacial tension, and promote even hydrocarbon recovery. Its nonionic nature balances with anionic and cationic surfactants used in high-salinity or high-temperature reservoirs, mitigating emulsion blockages and deposit buildup. Integration focuses on HSE management and compatibility with downhole and topside additives such as scale inhibitors and corrosion inhibitors.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Pulp and paper manufacturers add Tergitol 15-S-12 as a nonionic surfactant to wet-end chemical packages for effective dispersion of fillers, pigments, and sizing agents. It aids controlled foam management and prevents deposition on mill machinery, ensuring smooth paper formation and surface uniformity. The surfactant's low residual impact suits recycled fiber loops where regulatory and sustainability inspections target effluent quality and end-paper contact standards.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Competitive TERGITOL Nonionic Surfactant 15-S-12 prices that fit your budget—flexible terms and customized quotes for every order.
For samples, pricing, or more information, please contact us at +8615365186327 or mail to sales3@ascent-chem.com.
We will respond to you as soon as possible.
Tel: +8615365186327
Email: sales3@ascent-chem.com
Flexible payment, competitive price, premium service - Inquire now!
Working inside a manufacturing plant, the variety of surfactants lining our loading docks keeps growing year after year. There's one nonionic surfactant that stands apart during both formulation trials and real-world production runs—TERGITOL 15-S-12. Unlike generic blends, TERGITOL 15-S-12 brings a specific balance of chain length and degree of ethoxylation, and its performance in difficult-to-wet systems keeps surprising many in the industry. What you get with this product isn’t just another line in a product catalog, but a tool that unlocks reliable wetting, detergency, and stability in finished goods.
TERGITOL 15-S-12 is built on a C11-C15 secondary alcohol backbone, ethoxylated with an average of 12 moles of ethylene oxide. This molecular structure gives it a unique balance: enough hydrophilic character for water solubility, but enough hydrophobic backbone for meaningful surface activity. In practical terms, that means you see controlled foam, low cloud points, and good stability—whether in alkaline or acidic environments. If you’ve spent time in a blending plant, you know how easily a production batch goes off-spec when your surfactant sours, fails to dissolve, or comes out milky where clarity is expected. We see much less of that with 15-S-12, and our QC records reflect it.
In our experience, TERGITOL 15-S-12 presents as a clear to pale yellow liquid at room temperature, with a pour point that keeps it free-flowing unless deep winter arrives. Its typical actives run close to 100%; dilutions for specific plant processes are easy to achieve, since it maintains clarity at concentrations many surfactants won’t. We have tracked reactions to pH as well—stable under both strongly basic and moderately acidic conditions, staying compatible with many additives used in institutional or industrial cleaning formulas. We noticed that its cloud point sits higher than 15-S-7 or 15-S-9, which is critical in hot-processing steps or anywhere you want phase stability.
Day in, day out, TERGITOL 15-S-12 lands in cleaning formulations where reliable wetting and controlled foam matter. It performs consistently in hard surface cleaners, textile processing, and industrial degreasers. Its low-foaming nature gets strong marks from customers running automated equipment, especially tunnel washers, spray applicators, or continuous belt systems. Many textile clients have reported cleaner rinses with less residue, and machine shops like the way it lifts oil films without gumming up spray nozzles.
Its versatility extends into some less-visible niches, too. Lubricant manufacturers use it for wetting and spreading additive packages, and I’ve seen a fair share of labs test it in agricultural adjuvants. Unlike basic nonylphenol ethoxylates, which face regulatory pressure, TERGITOL 15-S-12 substitutes in most applications with lower toxicity and better biodegradability metrics—plus, it doesn’t leave behind unwanted odor in floor finishes or metal cleaners.
Inside the manufacturing team, we routinely benchmark every surfactant that comes through the door. Comparing TERGITOL 15-S-12 to shorter-chain versions such as 15-S-7 or 15-S-9, you notice the milder profile at equivalent dosages. Where the -7 or -9 variants can over-foam or struggle with clarity at certain strengths, the -12 shines by maintaining transparency and manageable foam. There are situations where 15-S-9 feels too aggressive for delicate surfaces or leaves micelles that deposit chalky residues; 15-S-12 instead stays soluble, and we’ve measured less filming in repeated-use environments, such as food plant floors.
The nonionic class brings varied choices. Some plants lean toward nonylphenol ethoxylates, and while those still work for basic cleaning, pressure continues to mount over their environmental persistence. TERGITOL 15-S-12 was developed to sidestep those legacy drawbacks, featuring lower aquatic toxicity and presenting fewer complications when it reaches a water treatment facility. Out of the half-dozen alkoxylated alcohols we handle, only a handful—including the 15-S-12—pass regular audits for both product safety and compliance in regions with tight VOC or toxicity rules.
Behind every truck shipment, our plant operators keep records on blend times, pre-mixing behavior, and batch consistency. The difference with TERGITOL 15-S-12 is clear after you run a few batches. It disperses quickly under moderate agitation, limiting fish-eyes or lump formation. That means less screen clogging and fewer restarts after filtration. Customers who run re-circulation loops, especially in surfactant-rich cleaning lines, have mentioned a clear drop in pressure build-up after switching from denser or higher-foaming alternatives.
During scale-up, foam control can make or break cycle times. The moderate foam of 15-S-12, even at higher dosages, has kept our batch reactors on schedule, and centrifuge dewatering goes smoother without the typical foam overflow headaches. Sludge disposal drops, and our filter cloths last longer. Throughout our in-house washdown and sanitation programs, crew members have commented on how it cuts traffic grime and leaves less film, even on rough concrete floors. As manufacturers, outcomes like these tell us more than any technical bulletin could.
Any plant leader knows regulations get tougher each year, especially around wastewater discharge and worker exposure. Regular third-party audits have confirmed that products built on 15-S-12 meet primary standards for environmental persistence without drastic changes in our effluent parameters. Some legacy surfactants saddle plant management with special disposal requirements or employee training mandates. With 15-S-12, we keep those headaches to a minimum, because its biodegradability supports green formulating.
Feedback from industrial hygiene teams and from formulators in our customer network points to high performance at lower dosages, which cuts down the overall chemical footprint for large-scale users. The surfactant’s lack of strong odor helps in enclosed settings, making it easier for line operators to work long shifts without discomfort. We notice users extending their clean-in-place cycles because less residue means faster rinsing, and less water runs to drain. Over time, these small changes matter for overall plant efficiency.
Across the industry, alternatives like SLES or LABSAs still get used in high-foam systems, but with more regional restrictions on discharge and end-of-pipe foaming, a mid-ethoxylated nonionic like TERGITOL 15-S-12 has gained traction. In our own compliance tests, 15-S-12 regularly posts lower aquatic toxicity numbers and faster oxygen demand reductions in secondary treatment tanks. We have fewer returns flagged for off-odor or batch separation, and that makes a difference in end-user loyalty.
No matter how technical the spec sheets look, customer decisions boil down to two questions: Does it work, and does it solve an operational problem? Over years of producing and blending hundreds of metric tons, we’ve watched die-cast shops, food packaging plants, and carpet mills all stick with TERGITOL 15-S-12 after finding measurable throughput gains. In textiles, mill operators run fewer rewash cycles because the surfactant rinses cleaner and doesn’t leave detergent marks. Food processors get lines restarted faster after sanitation flushes, and maintenance teams report less pump cavitation in spray-wash applications.
Lab teams keep pushing the chemistry envelope, but our experience shows that modest improvements—smoother batch blending, fast wetting, and easy rinsing—score highest with volume users. It helps that TERGITOL 15-S-12 does not demand special handling beyond what most manufacturing plants already have in place. You don’t see the pitting or surface corrosion common to harsher builder/surfactant blends, and the absence of APE (alkylphenol ethoxylate) structures means fewer compliance hiccups in regulated export markets.
Watching new operators blend a batch with 15-S-12 brings back memories of times spent managing thick, sluggish loads with older, cloud-prone surfactants. This product’s flow profile makes discharge fast; it stays pumpable without constant heating, so energy bills drop in cooler climates. Even in tank farm transfers, blockages or viscosity spikes just aren’t a recurring issue. For tank cleaning, the surfactant flushes away stubborn residues and stays compatible with most corrosion inhibitors added to protect process steel.
Compatibility often determines whether a surfactant makes it past the trial stage. Over several dozen test blends, we’ve observed strong mixing with both cationic and anionic co-formulants, including silicates, phosphates, and complexing agents used in heavy-duty degreasers. It doesn’t destabilize or shear-thin as quickly as shorter-chain analogues, and that widens its use. During cold weather, lower pour point means fewer headaches for warehouse crews, since product stays liquid enough for easy pumping and metering.
The plant maintenance teams appreciate its chemical stability across multiple pH ranges—there’s never any last-minute scramble to swap out surfactant types in response to formulation tweaks. Adjustments to loads or batch scales proceed with predictable impact, which limits costly rework or waste generation. When chemical suppliers offer free samples of unproven blends, operators and supervisors often prefer to stick with a model whose behavior we already understand in the real world.
Every production facility hits tough challenges from time to time: persistent residues, stability issues in hot fill lines, or raw material deviations from secondary suppliers. In cases where legacy surfactants can’t bridge formulation gaps, we have consistently used TERGITOL 15-S-12 to stabilize batches—especially during last-minute order changes or new raw material certifications. For example, in our CIP (clean-in-place) system, other surfactants would leave redeposit trails in hard water, leading to extra acid washes and production downtime. After switching, the system ran longer without fouling, and the rinses cleared up in fewer cycles.
Site engineers appreciate the safety record as well. It does not contribute to the inhalation hazards sometimes seen with strong-smelling or highly volatile chemicals. Skin exposure incidents lead to fewer reports, and our safety training integrates easier since hazard pictograms are fewer than with more aggressive chemistries. Over multiple years, records show reduced incident rates and less PPE demand on blending lines using 15-S-12 vs legacy materials.
Formulation science never stands still. Through the shifting demands of greener chemistry, performance testing for newer substrates, and regulatory updates on industrial cleaners, TERGITOL 15-S-12 holds its position because it adapts. Modern customers ask for both swift cleaning and compliance to environmental standards all in one drum. Our chemists and line workers know when they reach for this product, it answers on both fronts.
We’ve seen it blend into enzyme-based cleaners without causing denaturation, and it avoids frothing up under mechanical agitation in high-speed bottling. Other surfactants may work in simple solvent-heavy solutions, but can fail amid strong builders or oxidizers; TERGITOL 15-S-12 stays effective whether mixed with sodium hypochlorite or buffered with organic acids. Its ability to support broad classes of functional ingredients means our product line can evolve rapidly, with fewer supply chain bottlenecks or technical troubleshooting calls.
Over thousands of tons of blended output, you learn some habits. With TERGITOL 15-S-12, a few established best practices rise above the rest. Always add under moderate agitation—dumping it into stagnant water doesn’t respect the quick-dispersing nature and can slow batch times. Keep drums stored above minimal freezing points. If you’re using it with highly alkaline builders, allow a brief pre-mix to avoid microprecipitate formation. For process tank cleaning, use at concentrations that maximize wetting without encouraging over-foaming; sweet spot rates are easy to find after a few trial runs.
Our in-house protocol uses a slow ramp-up in CIP cleaning to hit stubborn deposits before switching to higher flow rates. This conserves product and water, and minimizes environmental footprint. Bulk handlers should flush hoses with a water push, as the surfactant’s wetting power strips residual grease from transfer lines, keeping the system running clean longer. In plant settings where downtime equals dollars lost, those simple habits keep lines running and bottlenecks rare.
Manufacturers face rising demand for transparent supply chains, accountable sourcing, and adaptable chemistry. TERGITOL 15-S-12 supports those trends, showing measurable gains not just in plant output but in waste minimization and air quality compliance. As expectations for “clean chemistry” rise in global markets, we rely heavily on products that offer real proof: consistent performance records, successful third-party audits, and regular feedback from both operators and customers.
Other new surfactants show promise, but end up needing secondary treatments or bring performance penalties. 15-S-12 continues to move in plant circles for a simple reason—year after year, it works. Real productivity gains, better compliance metrics, and reduced operational headaches keep this product at the frontline of practical formulating for manufacturers who know their way around a mixing tank.
All the technical jargon in the world won’t replace daily plant experience. For years now, we have tracked how TERGITOL 15-S-12 fits real-world needs at every level of industrial cleaning and process chemistry. That consistency, combined with low environmental impact and reliable supply, is why the product keeps its value for both plant operators and customers. Backed by thousands of batches run, and plenty of lessons learned, it remains a go-to solution for anyone dealing with the practical challenges of surfactancy in tough environments.