| HS Code | 841694 |
| Chemical Name | Polyethylene Glycol 600 |
| Trade Name | CARBOWAX PEG 600 |
| Cas Number | 25322-68-3 |
| Average Molecular Weight | 570-630 g/mol |
| Appearance | Clear, colorless to slightly yellow liquid |
| Odor | Odorless or slight characteristic odor |
| Solubility In Water | Completely miscible |
| Melting Point | Below 20°C (liquid at room temperature) |
| Boiling Point | Over 250°C |
| Ph Value | Approximately 5.0-7.0 (5% aqueous solution) |
| Viscosity | 90-130 mPa.s at 25°C |
| Specific Gravity | 1.125 at 20°C |
| Flash Point | >250°C (COC) |
| Vapor Pressure | <0.01 mmHg at 20°C |
| Storage Temperature | Room temperature |
As an accredited CARBOWAX Polyethylene Glycol PEG 600 factory, we enforce strict quality protocols—every batch undergoes rigorous testing to ensure consistent efficacy and safety standards.
| Packing | CARBOWAX Polyethylene Glycol PEG 600 is packaged in a 55-gallon (208-liter) blue plastic drum with secure, tamper-evident lid. |
| Container Loading (20′ FCL) | Container Loading (20′ FCL) for CARBOWAX Polyethylene Glycol PEG 600: Typically 16–18 metric tons, packed in drums, IBCs, or flexitanks. |
| Shipping | **Shipping for CARBOWAX Polyethylene Glycol PEG 600** is typically conducted in tightly sealed drums or containers to prevent moisture absorption and contamination. The product is non-hazardous, allowing for standard ground, air, or sea transport. Storage and transport should be at ambient temperatures, away from direct sunlight and strong oxidizing agents. |
| Storage | CARBOWAX Polyethylene Glycol (PEG) 600 should be stored in tightly closed containers in a cool, dry, and well-ventilated area away from heat, moisture, and incompatible materials. Avoid direct sunlight and sources of ignition. Keep the container upright and securely sealed to prevent contamination. Store at room temperature and follow proper chemical storage regulations and safety guidelines. |
| Shelf Life | CARBOWAX Polyethylene Glycol PEG 600 typically has a shelf life of **two years** when stored properly in unopened, original containers. |
As a primary manufacturer, we supply CARBOWAX PEG 600 for a variety of industrial applications where consistency and controlled performance characteristics are essential. Below are established downstream sectors and integration details based on industry-standard processing and compliance requirements.
Pharmaceutical manufacturers widely incorporate PEG 600 in semisolid dosage forms, especially for ointments, cream bases, and medicated gels. Its low molecular weight ensures water solubility and controlled viscosity, which are critical during automated compounding and filling processes. PEG 600 functions as both a solvent for active pharmaceutical ingredients (APIs) and a consistency enhancer for topical applications. We supply grade-consistent material aligning with mandatory quality benchmarks demanded in regulated markets.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
PEG 600 finds established use in the formulation of nonionic surfactants and process defoamers, particularly in the pulp and paper, paint, and fermentation industries. As a hydrophilic backbone, PEG 600 provides controlled wetting, reduces surface tension, and enables rapid dispersion of other surface-active agents. Industrial chemical formulators prefer its non-volatility and minimal residue characteristics for process-sensitive end-uses.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Manufacturers of rubber goods and elastomeric parts utilize PEG 600 as an internal plasticizer and process aid. The material modulates flow properties, reduces melt viscosity, and facilitates filler dispersion during compounding. PEG 600 is particularly effective in synthetic rubber (e.g., EPDM, NBR) compounding where precision plasticization enhances both flexibility and surface finish of extruded and molded goods.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
PEG 600 serves as a chain extender and polyol in rigid and flexible polyurethane formulations. It enables formulators to adjust cell structure, hardness, and hydrolytic stability in reaction mixtures for both foam and solid resins. PEG 600 participates in the initial polymerization, contributing to hydrophilic surface modification and consistent curing profiles. Our direct supply ensures batch uniformity for foamers and resin blenders.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Cosmetics and personal care producers use PEG 600 extensively in cream rinses, skin lotions, and oral care pastes, relying on its humectant and solubilizer properties. The grade’s low volatility and chemical stability ensure performance in creams and liquids that require clarity and minimal sensory impact. PEG 600 supports smooth product texture, active delivery, and storage stability, especially in high-throughput contract manufacturing environments.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Chemical processors employ PEG 600 as a core reactant for producing specialty esters, ethers, and surface-active agents. Via targeted transesterification and etherification, manufacturers generate intermediates for textile lubricants, synthetic lubricants, and antistatic additives used across industrial sectors. PEG 600 reacts under controlled temperature and catalytic conditions, contributing to the precise chain length and functional group introduction demanded by specialty chemical customers.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Competitive CARBOWAX Polyethylene Glycol PEG 600 prices that fit your budget—flexible terms and customized quotes for every order.
For samples, pricing, or more information, please contact us at +8615365186327 or mail to sales3@ascent-chem.com.
We will respond to you as soon as possible.
Tel: +8615365186327
Email: sales3@ascent-chem.com
Flexible payment, competitive price, premium service - Inquire now!
The backbone of our daily operation rests on a small number of thoroughly understood, tightly controlled compounds, and CARBOWAX Polyethylene Glycol PEG 600 stands out as one of the most reliable. As manufacturers, we know PEG 600 not just as a chemical identifier or a commodity, but as a trusted tool in countless production lines. PEG 600 flows as a colorless to slightly off-color, mostly odorless liquid at room temperature, and that clarity describes its function in our workflow. With an average molecular weight between 570 and 630, PEG 600 balances mobility and solubility — it pours with low resistance, mixes with water and alcohol without fuss, and maintains a stable, neutral character through a wide range of processing conditions. Hydroxyl values typically range from 150 to 180 mgKOH/g, while its density hovers around 1.125 g/cm3, supporting accurate dosing and handling.
Long before it reaches a drum or a tote in a customer’s warehouse, PEG 600’s value comes from where it lands on the chain of glycols. PEG 200 and 400, for instance, carry greater volatility, lower viscosity, and a faster evaporation rate. These variations seem slight until production conditions push temperature or mixing speed past a threshold; at that point, lower molecular weights release vapor or change consistency in ways that cost time or force operator intervention. PEG 600 stays put in heated reactors and maintains its identity in open vessels, resisting the loss through evaporation that can throw batches out of spec. Plastics customers note this characteristic often, especially in polyether polyol combinations where low residue and reliable reactivity seem minor but carry consequences for final yield.
End users in sectors as varied as pharmaceuticals, personal care, and resin casting all recognize PEG 600 for its ability to provide lubricity without leaving behind oily residues or causing unwanted emulsification. We have seen engineers in formulation labs substitute PEG 400 or below with PEG 600 to achieve better plasticizer action, improved organoleptic profile, and richer compatibility with hydrophobic and hydrophilic components. Where PEG 200 might be too thin and PEG 1500 or 4000 leaves a waxy touch, 600 finishes with a pleasant, smooth quality that doesn’t gum up pumps or lines.
PEG 600 acts as a workhorse in a surprising number of installations. At our manufacturing sites, we blend and react PEG 600 for use in creams, ointments, and liquid preparations, where it dissolves actives, enhances absorption, and stabilizes viscosity. In pharmaceutical plants, line operators count on its inert profile; PEG 600 rarely interferes with delicate APIs, thanks in large part to our quality assurance backed by real-time analytics that measure consistency and purity. Production supervisors look for smooth pour and reliable flow under both lab and high-volume run conditions, and PEG 600 consistently delivers.
If you have ever stepped onto the floor of a candle production facility or walked through a surface coating plant, you already understand the headaches of mixing incompatible materials. PEG 600 enters such processes as a plasticizer or carrier, smoothing the blending of ingredients and improving product texture without imparting unwanted color or odor. Chemists mixing aqueous slurries appreciate how PEG 600 shortens the time for powders to dissolve, preventing caking at the tank bottom, and secures faster turnarounds on every shift. We’ve worked with food production teams who exploit PEG 600 for its proven ability to regulate moisture, sweeten syrups, and support flavor dispersion, always confident that the product complies with leading pharmacopeia and food-grade standards.
In textile and paper mills, operation managers order PEG 600 for sizing and as a lubricant in fiber spinning. Here, PEG 600 earns its place because it holds to textile strands without breaking down or washing off too easily in high-speed processing. Personal care brands opt for PEG 600 as the backbone for non-greasy lotions and soaps, because it produces gentle, rinse-easy solutions consumers look for. Batch after batch, it works, helping practitioners in R&D move from lab scale to production scale with fewer process tweaks.
Chemical manufacturing is as much about precision as it is about getting hands dirty: we see every day the importance of proper material handling. PEG 600 moves from bulk storage to finishing tanks through stainless lines since trace metal contaminations from mild steel can impact long-term stability. Forklift operators note its manageable viscosity — less solid than higher weights, less viscous than the often syrupy PEG 1500 — helping our teams move drums without the risk of spillage or pump failure. No one on our team likes surprises, and the stable storage properties of PEG 600 back up its reputation. With a freezing point just above -10°C, PEG 600 does not clog pipes in unheated environments, unlike higher-weight PEGs that require warmers to handle without solidifying.
We design our plant to ensure every batch follows the same rigorous procedures: triple-filtration stages before every lot leaves for packing, monitored humidity to avoid unnecessary water pickup, and reduced headspace to keep airborne contaminants away. Technical teams carry out viscosity and hydroxyl checks for every lot, since minor variations can compound into defects down the line. Seeing raw PEG 600 flow into a final tank, clear and free from haze, serves as a quiet confirmation that another batch meets customer needs.
As direct manufacturers, we benchmark each run of PEG 600 not only against global standards, but also against batches of PEG 200, 400, 1500, and 4000 from our own lines. Lower molecular weights excel in high-solubility needs or as solvents for highly volatile actives; PEG 600 steps up where those grades falter, providing a density that avoids loss in open mixing or high-shear processes. PEG 1500 and above serve semisolid to solid functions and become unwieldy in applications demanding fast dissolution and low residue. PEG 600 fills the gap for applications wanting both liquidity and substance.
We have supported customers through operational transitions, replacing inconsistent imports with our high-purity PEG 600, tightening up everything from quality documentation to buffer stock planning. PEG 600 distinguishes itself through a unique profile — not just specification lines, but how it lands in tanks, resists color drift even at elevated temperatures, and delivers reliable end performance. Customer QA teams often report tighter weight tolerances and ease of cleaning tanks between batches compared to more viscous or lighter polyethylene glycols.
Our labs run accelerated aging tests, UV exposure, and microbial challenge studies. PEG 600 consistently beats lower-molecular alternatives where extended shelf lives make a difference. Because we run the same chemical day after day, packing tons per shift, we have the accumulated data to spot quality shifts before they hit customer lines. Our internal audits and repeated customer feedback bear out the same message: PEG 600 sticks to performance requirements, batch after batch, with fewer unplanned interventions and virtually no negative surprises.
Quality is not a promise — it is the lived reality of hundreds of thousands of kilograms shipped without incident. Every drum of PEG 600 runs through ASTM and pharmacopeial checks for moisture, heavy metals, pH, and residue. The labs focus on confirming toxicity complies with leading standards for cosmetics and food applications, regularly testing for propylene oxide, ethylene oxide, 1,4-dioxane, and other trace impurities that regulators care about. Food safety officers audit our historical records and trend charts, and the results stand up — heavy metals running below the detection limit, pH readings that reassure R&D teams, and purity profiles proven by independent labs.
Pharmaceutical auditors require full backward traceability on PEG 600. Our plants accommodate this by maintaining batch numbers linked to reactor logs and raw material source documents; every liter delivered can be matched to analytical records, from feedstock glycol all the way to final drum. Consumer brands looking for clean-label PEGs cite the transparency this creates; no skipped steps, no mysterious intermediates, just clear data and clean process history. It might seem routine to us, but for downstream manufacturers this level of transparency supports swift regulatory approvals and expedites product launches.
Every year, we adapt our production and documentation to meet evolving requirements from major markets. We bring the same rigor to meeting ISO and local compliance norms as we do to meeting customer specs. The end result: an established record of regulatory acceptance across North America, Europe, Asia, and the Middle East, grounded in thousands of product validation reports and zero recalls linked to process deviation.
Our applications and technical teams have fielded every question imaginable about using PEG 600 — from extrusion run temperatures to blending strategies for liquid formulations. In plant audits, we help troubleshoot mixing issues by highlighting PEG 600’s anti-caking, humectant, and lubricating properties. Hands-on work with customer sites reveals that direct, real-world support accelerates issue resolution by weeks compared to customers dealing only through traders or resellers. Access to the manufacturer means quick clarification on safe handling, compatibility, and field process tweaks; we’ve seen formulators reduce cycle times by optimizing grade and blending regime, guided by our own process experts.
Training sessions, conducted on site or remotely, target both experienced chemists and brand-new line workers. Every new application or process change brings its own set of variables. We help engineers ensure the PEG 600 grade selected for one process will not compromise another down the line, drawing on pilot plant trials and years of plant troubleshooting. Synchronicity between technical teams and customers forms the unseen margin for success.
Even after implementation, feedback reaches us directly. When a multinational food brand uncovered batch-to-batch flavor variation, a joint analysis pinpointed insufficient mixing time as the culprit — an issue resolved not with more additives, but with an optimized process design leveraging PEG 600’s liquid character. These lessons, shared openly with our partners, build the foundation for trust throughout the value chain, from tank farm to consumer shelf.
Markets shift. Ten years ago, PEG 600 went most often into conventional applications: bulk solvents, simple humectants, basic plasticizers. Recently, demand moved towards applications demanding higher purity, cleaner process records, and sustainability evidence. Pharmaceutical and food brands dig deep into supply chains seeking provenance and reliability. As direct manufacturers, we have responded by improving not only physical plant infrastructure, but also data management, traceability systems, and supply resilience.
Environmental responsibility becomes more central every year. PEG 600, produced with careful selection of feedstock and controlled oxidation-reduction cycles, fits well in operations targeting low emissions and minimal waste. Energy reclamation from exothermic reactor stages, closed-loop water systems, and solvent recovery units all play a part in keeping our environmental footprint in check. Sustainability auditors often highlight PEG 600 as a mature, less-volatile constituent in product recipes; clear documentation follows every drum, offering downstream manufacturers assurance for their own certifications and reporting.
Safety teams reviewing chemical handling calendars appreciate PEG 600’s low flammability and manageable inhalation risk. In worker training, we stress correct PPE and handling, but the chemical’s low hazard profile simplifies daily operation compared to many alternatives. Storage of PEG 600 does not tax cooling infrastructure or pose unique risks for insurance compliance, making it a practical choice for distributors, repackers, and end users concerned with facility safety audits.
In chemical manufacturing, downtime is costly and confidence is built batch by batch. PEG 600’s role in customer supply chains reflects this reality. We maintain buffer stocks, flexible reactor scheduling, and backup suppliers for ethylene glycol. Raw material fluctuations do not rattle our supply lines, and contract customers benefit from shipment histories that reveal a strong record of punctual deliveries. Some of the bestselling toothpaste and lotion brands, though not ours, owe their own uptime to reliable flows of our PEG 600 through their pipework.
Major demand spikes, like sudden changes in hand sanitizer usage or pharmaceutical launches, occasionally stress even the best-run supply chains. Our teams have weathered these surges by building-in tankage and redundant shipping capacity, and supplying forecast information that helps downstream partners keep production smooth. Few appreciate the hours and planning that go into keeping a truck or rail car of PEG 600 ready to load on short notice, but this behind-the-scenes work spells the difference between a plant that runs and one that sits idle.
Production economics weigh heavily in chemical manufacture today. Feedstock costs fluctuate, regulatory environments add reporting and testing requirements, and shipping undergoes disruptions from global logistics snarls. PEG 600, while never immune from these pressures, offers resilience thanks to both robust demand and an inherently stable profile. We have slashed waste and reduced rework rates through years of incremental improvements — smarter dosing systems, enhanced purification stages, and automated analytics at multiple steps. These investments not only sharpen our own costs, but also help customers who rely on stable pricing and predictable supply.
Periodically, pressure emerges from markets chasing “PEG-free” claims, notably in natural or organic personal care. We support transparency here too. Several of our customers continue to specify PEG 600 because independent testing reaffirms its lack of reactivity and confirmable safety in finished products. Our documentation, audit trails, and open-door philosophy enable buyers to defend their ingredient choices in regulatory filings as well as marketing materials. Alternatives exist, but few can match PEG 600’s documented record, clarity of sourcing, and manufacturing transparency.
Chemical manufacturers have watched the story of PEG 600 unfold over generations. Today, it fits as easily in high-speed production as in careful R&D, demonstrating an ability to adapt to new process realities and market demands. We invest not just in process equipment, but in people, validation, and quality data that supports every drum. End users benefit from a product engineered for versatility — one that does not surprise, does not drift out of spec, and always arrives with the backup of technical support rooted in real, hands-on manufacturing.
As more industries demand traceable, minimally variable ingredients, PEG 600 grows even more important. Our customers face pressure from every direction — to scale up, cut waste, prove quality, and reassure regulators. PEG 600, with its flexible liquid profile, stable storage, and proven safety, provides a solid platform for innovators in pharma, personal care, agriculture, and industrial chemistry. From our first batches decades ago to today’s fully digitized lines, we stake our reputation on the reliability, clean handling, and industry-wide trust that come with every shipment of CARBOWAX Polyethylene Glycol PEG 600.