Dow Inc

Products

CARBOWAX Polyethylene Glycol MPEG 350

    • Product Name: CARBOWAX Polyethylene Glycol MPEG 350
    • Chemical Name (IUPAC): Methoxy polyethylene glycol
    • CAS No.: 9004-74-4
    • Chemical Formula: C16H34O8
    • Form/Physical State: Liquid
    • Factroy Site: Yudu County, Ganzhou, Jiangxi, China
    • Price Inquiry: sales3@ascent-chem.com
    • Manufacturer: Dow Inc
    • CONTACT NOW
    VTB
    Specifications
    HS Code 103830
    Product Name CARBOWAX Polyethylene Glycol MPEG 350
    Chemical Name Methoxy Polyethylene Glycol 350
    Appearance Clear, colorless to slightly yellow liquid
    Odor Mild or odorless
    Solubility In Water Miscible
    Ph Value 5-7 (as aqueous solution)
    Boiling Point Greater than 200°C
    Flash Point Over 200°C (Closed cup)
    Density Approximately 1.07 g/cm³ at 20°C
    Viscosity 80-100 cP at 25°C
    Cas Number 9004-74-4

    As an accredited CARBOWAX Polyethylene Glycol MPEG 350 factory, we enforce strict quality protocols—every batch undergoes rigorous testing to ensure consistent efficacy and safety standards.

    Packing & Storage
    Packing CARBOWAX Polyethylene Glycol MPEG 350 is typically packaged in blue 55-gallon (208-liter) drums with secure, sealed lids for safety.
    Container Loading (20′ FCL) 20′ FCL container can load approximately 16 MT of CARBOWAX Polyethylene Glycol MPEG 350, typically packed in 200 kg HDPE drums.
    Shipping CARBOWAX Polyethylene Glycol MPEG 350 is typically shipped in tightly sealed drums or pails to prevent contamination and moisture absorption. It should be transported at ambient temperatures, avoiding excessive heat. Proper labeling and documentation in compliance with relevant regulations are ensured. Store upright in a dry, well-ventilated area during shipping and storage.
    Storage CARBOWAX Polyethylene Glycol MPEG 350 should be stored in a cool, dry, and well-ventilated area, away from direct sunlight and sources of ignition. Keep the container tightly closed to prevent moisture absorption and contamination. Avoid storing near strong oxidizing agents. Ensure proper labeling and use chemical-resistant containers. Follow all applicable local, regional, and national regulations for storage.
    Shelf Life CARBOWAX Polyethylene Glycol MPEG 350 has a typical shelf life of two years when stored in unopened, original containers under recommended conditions.
    Application of CARBOWAX Polyethylene Glycol MPEG 350

    Applications of CARBOWAX Polyethylene Glycol MPEG 350 in Industrial Manufacturing

    As a direct manufacturer, we supply CARBOWAX Polyethylene Glycol MPEG 350 to a range of specialized industries, supporting both high-volume processing and precise formulation requirements. Our technical team works closely with downstream sectors to ensure reliable integration, regulatory compliance, and performance consistency in each industrial context described below.

    1. Surfactant Synthesis for Detergent Concentrates

    Major detergent producers integrate CARBOWAX MPEG 350 for synthesizing nonionic surfactants, specifically as a methyl ether-terminated hydration agent in the ethoxylation stage. This raw material adjusts hydrophilic-lipophilic balance (HLB), manages viscosity during batch processing, and enables formulation stability for high-activity liquid and powder detergents. Controlled dosing ensures consistent foam control and compatibility with enzyme or bleach systems, according to customer application profiles.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    2. Emulsifier Preparation for Water-Based Polymer Coatings

    Leading resin and coating plants use MPEG 350 as a controlled molecular weight capping agent in the emulsion polymerization of acrylic and styrene-acrylic copolymers. This polyether improves particle size distribution, enables low-VOC formulations, and enhances film uniformity. Proper addition ensures batch-to-batch reproducibility, reduced coagulation risk, and smooth letdown to paint manufacturers’ specifications.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    3. Pharmaceutical Ointment and Cream Base Manufacturing

    Pharmaceutical formulators select MPEG 350 as a hydrophilic base component in topical ointments and creams, owing to its defined molecular weight and inertness. By blending this PEG derivative with fatty alcohols or hydrocarbon gels, formulators achieve controlled spreadability and consistent drug release. Strict lot qualification and process audit trails support regulatory filings and GMP inspections.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    4. Chemical Intermediate in Polycarboxylate Ether (PCE) Superplasticizer Synthesis

    MPEG 350 serves as a key macromonomer in the synthesis of polycarboxylate ether superplasticizers for ready-mix concrete production. Reacting MPEG 350 with maleic anhydride or acrylic acid through controlled free radical or Michael addition enables precise tuning of side-chain length, essential for achieving excellent water reduction without excessive air entrainment. Strict process QC ensures consistent molecular architecture for concrete flow performance in compliance with international construction codes.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    5. Demulsifier Agent in Oilfield Chemical Blending

    Crude oil producers apply MPEG 350 as a demulsifying polyether agent in water-in-oil and oil-in-water separation treatments. Its controlled hydrophilicity enables full solubilization in both hydrocarbon and brine phases, aiding emulsion breakage, water clarification, and oil recovery. Quality parameters such as cloud point and residuals are monitored to meet HSE and field performance needs.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    Free Quote

    Competitive CARBOWAX Polyethylene Glycol MPEG 350 prices that fit your budget—flexible terms and customized quotes for every order.

    For samples, pricing, or more information, please contact us at +8615365186327 or mail to sales3@ascent-chem.com.

    We will respond to you as soon as possible.

    Tel: +8615365186327

    Email: sales3@ascent-chem.com

    Inquiry

    Get Free Quote of Dow Inc

    Flexible payment, competitive price, premium service - Inquire now!

    Certification & Compliance
    More Introduction

    Introducing CARBOWAX Polyethylene Glycol MPEG 350: Practical Experience from the Plant Floor

    Real Results: What Happens in the Factory Is What Matters

    Out in the factory, it’s straightforward: the tools and raw materials either do the job, or they don’t. CARBOWAX Polyethylene Glycol MPEG 350 has shown itself as a dependable component that fits many jobs our customers ask for. I’m not talking about fancy marketing claims. This polyether compound, known among our team just as “MPEG 350”, brings clear advantages whether you work in surfactants, antistatic agents, lubricants, or coatings. I see its value firsthand during blending runs and quality checks. It’s a clear, viscous liquid with an average molecular weight around 350, achieved through strict reaction conditions. That’s not something you get by chance—consistency comes from running reactors under controlled temperatures, regular residue tests, and fine-tuning feedstock ratios.

    Our technicians measure color, viscosity, and hydroxyl value batch by batch; a slip here shows up straight away downstream. So, when a customer asks for “constant performance,” we know exactly what that means, because our own batch records show exactly where outliers come from and what stress points to watch. MPEG 350 is water-soluble and non-ionic, which means it blends well into water-based systems. We load and blend this material into formulations for cleaning products, textile finishes, paints, and specialty lubricants. In blends, it brings softening, emulsifying, anti-static, and solvency properties, thanks to the balanced ratio of ethylene oxide in every molecule.

    In the production plant, safety and handling matter. At room temperature, MPEG 350 pours smoothly from drums and IBCs, so there’s no mess like you’ll get with high-viscosity grades. Our line operators don’t handle clumps or flakes. The liquid clears out from hoses and transfer pumps easily and leaves minimal residue behind. These small handling details affect line uptime and tank cleaning cycles in real ways.

    Why MPEG 350 Works Well in Specialized Applications

    Not every polyethylene glycol fits every purpose. Lower-molecular PEGs, such as PEG 200 or 300, show less viscosity and sometimes higher volatility in heated systems. Those grades might be preferred for thinner coatings or as solvents when volatility is needed, but MPEG 350 strikes a sweet spot where viscosity aids lubrication or film-forming, but doesn’t slow down transfer rates.

    The “M” in MPEG stands for “methoxy.” Unlike ordinary PEGs which terminate in hydroxyl groups, the molecule in MPEG 350 ends with a methoxy group, changing several aspects of its performance. The methoxy termination brings extra stability in certain chemical environments where oxidation or hydrolysis would knock out a regular PEG’s structure. For those of us working with formulations that cycle through heat, acid, or alkali conditions, this detail makes a difference. Methoxy-capped PEG 350 holds up in such cycles without yellowing, breaking down, or gumming up metering lines, while other PEGs might darken or lose their fluidity. If you have any experience walking through a shop floor and checking for degraded sample jars, you notice these differences quickly.

    In cleaning product lines, MPEG 350 gets used as a solubilizer or co-surfactant: its balance of hydrophilicity and oil affinity allows it to bring non-polar oils into water. In textile finishing, it gives a soft hand and anti-static properties, which we test after every batch by running a panel through static charge assessments. In lubricants, the viscosity enhances boundary lubrication and wear protection, but its water solubility also allows quick clean-out during equipment maintenance. I have watched maintenance teams cut their turnaround time by half due to easier lubricant wash-out when MPEG 350 is used as the base fluid.

    Some of the more demanding applications such as electronic fluids or inkjet inks require high purity and tight molecular weight distribution, which comes from diligent control of raw ethylene oxide and methanol purity, and monitoring reaction time and impurities. The plant team keeps an eye on these values through advanced analytic tools, ensuring every drum rolls out on spec—nothing beats seeing a chromatograph come out clean. If you see off-spec numbers—like unexpected diethylene glycol or higher aldehyde—operators know to take corrective action before it ever reaches the fill line.

    Clear Differences from Standard PEGs

    Working inside a manufacturing plant, side-by-side comparisons give us fact-based results that go far deeper than technical brochures ever could. Compared to regular PEG 350, MPEG 350 resists degradation in bleach or peroxide systems. Clients working with oxygen-sensitive chemistries often share feedback that MPEG 350 holds up without forming colored side products or losing clarity, even after repeated cycling in test reactors. The methoxy end group means it doesn’t engage in the same reactivity as a hydroxy-capped PEG, which can run into side reactions in resin or adhesive curing systems. We see MPEG 350 leave cured films with fewer defects and less haze, just as our QC lab records document batch after batch.

    Some customers ask about melting points and pour behavior for thermal processing applications. MPEG 350 remains liquid down to near room temperature, so it pours right from bulk, eliminating the need for heaters in most climates. Our team finds less caking in pump stators and transfer hoses compared to similar-mass solid PEGs. The lower pour point makes a difference in cold start-ups and batch blending—seasonal temperature swings don’t foul up feed lines. These real-world advantages add up day by day.

    For engineers responsible for scale-up or troubleshooting plant fouling, it quickly becomes obvious that methoxy-terminated PEG 350 absorbs less moisture than ordinary PEGs over time. Test panels in the QC bench show slower uptake of humidity and less tendency to cake or form gels in open-top containers. We store MPEG 350 in drums and IBCs for months without seeing dramatic viscosity shifts. Customers doing pilot runs confirm our own findings—stable fluidity means consistent metering, no surprises on fill volumes, and less downtime during changeovers.

    Supporting Modern Manufacturing—Not Just Specialty Formulations

    As more industries call for greener, safer, and more effective raw materials, MPEG 350 fits the evolving demands. We field questions about regulatory compliance, biocompatibility, and environmental safety. The known toxicological profile for MPEG 350 allows for use in many consumer applications, after a safety-by-design review during product development. The purity is key: manufacturing requires tight control over trace materials, such as monoethylene glycol, methanol, and residual catalysts. Our team focuses batch release on these contaminant levels.

    Some industries look for alternatives to more toxic or persistent surfactants—textiles and personal care are prominent examples. MPEG 350 bridges the gap with its combination of water dispersibility and low toxicity, confirmed by repeat testing in our own product safety evaluations. Equipment cleaning is safer as well: since MPEG 350 is non-toxic and biodegradable, spent solution washout can be handled without extensive secondary treatment.

    Customers developing new blends for crop protection, inks, or specialty coatings often bring us samples for pilot batches. We load MPEG 350 alongside resins, pigment dispersions, and waxes, then analyze finished performance, shelf-life, and color stability. For many, using MPEG 350 reduces yellowing or hard settling during storage. We see fewer complaints about shelf-life failures, and return rates drop. Our R&D team collaborates directly with line operators to adjust recipe percentages, targeting the right balance of lubrication, flow, and shelf-stability before moving to large-scale production.

    Formulation, Batch Control, and Downstream Consistency

    A common question among our largest industrial coatings customers revolves around repeatability: how can one drum of MPEG 350 match the next? Inside production, the answer has always rested with strict in-process controls and the discipline to discard off-spec batches. Our plant utilizes in-line sampling, along with calibrated densitometers and spectrometers, to document viscosity, color, and purity every batch. Any deviation from established specs is flagged before product ever leaves the warehouse.

    Formulators with sensitive blends tell us the lot-to-lot consistency in hydroxyl and methoxy end-group content makes it possible to fine-tune setting times and cure speeds with confidence. With other PEG brands offering wider variability, unexpected gel or crust formation shows up in the finished product. In our system, the batch records and COAs keep everyone accountable, giving both us and our customers traceability and confidence in the supply chain.

    Those running continuous-feed production systems value the way MPEG 350 maintains pumpability. Unlike high-mass waxy PEG blends, which sometimes lead to filter blockage or transfer tube obstructions, MPEG 350 flows clean, even as ambient temperatures move up or down. Downtime linked to hose purging drops noticeably, backed up by our maintenance logs.

    Sometimes process changes introduce new variables: system pressures, cleaning schedules, incorrect line purge, or unknown batch interaction. Our on-site technical team troubleshoots such cases with real plant data, not just theoretical properties. By tracking small details—feed rates, ambient temperature, off-gassing, pH drift—we help customers adapt their blends for MPEG 350’s precise profile. The direct feedback loop from plant floor to lab means we stay ahead of surprises, supporting both routine and custom blend runs.

    Addressing Concerns About PEGs and Methoxy Capping

    Some end-users or regulatory groups express concern about PEGs due to possible contamination with process residues or breakdown under tough chemical conditions. From our point of view, every batch of MPEG 350 undergoes rigorous process validation and analytical verification, particularly screening for low molecular weight byproducts and aldehydes. Analytical results share with customers establish transparency. Repeated stability tests under thermal and UV light exposure show lower breakdown rates for methoxy-capped PEG 350 compared to uncapped versions.

    Methoxy capping confers several performance enhancements—especially oxidation resistance—which we continually validate in both finished product and storage studies. Agricultural spray additives and coating manufacturers rely on these properties. We report back quantitative values: yellowness index, clarity, viscosity change, and end-group analysis every cycle. Down the line, that means fewer surprises for end users, longer product shelf-life, less sedimentation, and lower risk of regulatory recalls or field failures.

    Making Informed Choices for Changing Applications

    We’ve seen a steady growth in inquiries about MPEG 350 as customers phase out less sustainable or less effective ingredients. Each year, more specialty formulators approach us seeking improvement in application speed, shelf-life extension, or reduced maintenance in their lines. By welcoming these requests—and running pilot-scale tests on real filling and blending equipment—the plant staff develops a direct sense of what MPEG 350 brings versus off-the-shelf alternatives.

    For performance blends, flexibility counts. Some applications need low color and low odor, while others rank clarity, purity, or flowability as top priorities. MPEG 350 earns its keep by meeting these diverse needs: color holds steady, no burnt flavors or yellow cast, pourability remains smooth, and blending is straightforward, even after weeks in storage.

    On the supply side, as market volatility affects raw materials, we’ve made supply chain investments in storage, transport, and inventory redundancy for MPEG 350 production. This minimizes shipment gaps, which our packaging and logistics team tracks monthly. Users see the benefit in reliable order fill rates and on-time shipment—vital for continuous-run systems or high-turnover manufacturing lines. Supply chain consistency, from our reactor vessels to finished drums, keeps our customers’ processes steady and downtime rare.

    We believe in keeping honest records and accountability. Any performance limitations for MPEG 350 show up directly in our in-house and partner application studies. Product suitability grows as we learn more about new uses or more demanding blends. Feedback from end users and repeat checks let us continuously tighten controls and communicate clearly about what works best for each process.

    Supporting Facts: Industry Trends and Field Feedback

    Statistics from market surveys and performance audits provide hard proof: solvents and surfactants containing PEG derivatives remain in high demand, but buyers gravitate to grades like MPEG 350 that combine stability, process safety, and easy handling. Coatings, agrochemical, and personal care markets consistently list MPEG 350-type materials as preferred for quality and low maintenance. In-agrochemical formulations, for example, we notice customers return year after year, reporting less filter clogging and easier tank clean-outs compared to older glycol blends. Paint manufacturers note improved color clarity in blends containing MPEG 350, while machine shops cite fewer equipment cleanings and lower off-gas odors compared to alternate blends.

    We continue to invest in both bench-scale studies and customer co-development. Partnerships with key customers let us validate our findings by running real production runs—logging metering speeds, blend viscosities, and off-the-line visual inspections. Our batch history and analytical library back up technical claims, which helps build trust with long-term users.

    Our focus stays on clear improvement: safer handling, easier transfers, more consistent blends, and reliability under chemical stress. Each upgrade or adjustment is built on what works during long-term use, not just what looks good on spec sheets. As industry expectations shift toward reliability, safety, and transparency, MPEG 350 stands as a proven choice for a diverse range of processes. Newer regulations and performance standards raise the bar, not just for product quality, but also for transparency throughout the manufacturing chain. Our approach keeps pace through detailed batch records, robust control protocols, and a willingness to share technical results that matter in daily operations.

    Conclusion: Long-Term Reliability In Every Drum

    As raw material demands shift, and as customers search for sustainable, reliable performance in manufacturing, MPEG 350 proves itself repeatedly. Manufactured with careful controls over raw material selection and batch handling, every container embodies real work from the plant team and stands behind every formulation that rolls off a customer’s line. For those facing tough challenges—equipment downtime, inconsistent blends, or unreliable raw feeds—adopting MPEG 350 can solve problems because we back every batch with real-world experience and well-kept records.

    By focusing on down-to-earth, results-driven manufacturing, we ensure that every shipment serves the same reliability, handling, and performance standards we stake our reputation on. Given what’s at stake in modern production, that level of accountability means more than any sales pitch ever could.