| HS Code | 488866 |
| Product Name | AXELERON Cable Compound CS O-3364 NT |
| Appearance | Off-white paste |
| Application | Water blocking compound for cables |
| Base | Non-toxic synthetic oil |
| Consistency | Soft grease |
| Density | 0.90–0.95 g/cm³ at 25°C |
| Penetration | 300–350 (0.1 mm, 25°C) |
| Dropping Point | >120°C |
| Water Absorption | High |
| Corrosiveness | Non-corrosive |
| Compatibility | Compatible with most cable polymers |
| Service Temperature | -40°C to +70°C |
As an accredited AXELERON Cable Compound CS O-3364 NT factory, we enforce strict quality protocols—every batch undergoes rigorous testing to ensure consistent efficacy and safety standards.
| Packing | Axeleron Cable Compound CS O-3364 NT is packaged in 25 kg polyethylene bags, with clear labeling and sealed to prevent contamination. |
| Container Loading (20′ FCL) | Container Loading (20′ FCL) for AXELERON Cable Compound CS O-3364 NT: 16 metric tons, packed in 25kg bags on pallets. |
| Shipping | AXELERON Cable Compound CS O-3364 NT is shipped in securely sealed, labeled containers that comply with international chemical transportation regulations. Typical packaging includes drums or pails, ensuring product integrity and leak prevention. All shipments include safety data sheets (SDS), and handling is performed by trained personnel following relevant safety guidelines. |
| Storage | AXELERON Cable Compound CS O-3364 NT should be stored in a cool, dry, and well-ventilated area, away from direct sunlight, heat sources, and incompatible materials. Keep containers tightly closed and protected from moisture. Avoid storage at temperatures above 40°C. Follow all relevant safety and regulatory guidelines for storage to maintain product quality and ensure safe handling. |
| Shelf Life | The shelf life of AXELERON Cable Compound CS O-3364 NT is typically 12 months when stored in unopened, original containers under recommended conditions. |
AXELERON Cable Compound CS O-3364 NT finds widespread use in advanced cable manufacturing, where stringent quality and performance requirements drive demand for consistent, high-specification polymer compounds. As a direct producer, we supply this formulation to leaders in critical electrical, communications, and industrial systems. Below, we detail main application channels, specifying standards, compounding parameters, process integration points, and typical finished goods.
Utilities, renewable energy, and large-scale infrastructure projects specify this compound for sheathing and insulating low voltage, medium voltage, and control power cables. CS O-3364 NT delivers precise dielectric strength, flame retardance, and stress-crack resistance, necessary for power distribution grid compliance. Manufacturers consider this compound essential for withstanding thermal cycling, mechanical stress, and direct burial environments over long cable lifespans.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Structured cabling manufacturers employ this compound in high-speed data cable jackets where precision surface finish, oil resistance, and flame retardance are essential. It ensures stable transmission in environments ranging from corporate IT to telecom backbone installations and aligns with rising performance benchmarks in network cabling for offices, data centers, and smart buildings.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Tier-1 and Tier-2 automotive suppliers depend on this compound for critical wire harness jacket and insulation applications. Required properties include high thermal stability, abrasion resistance, and resistance to automotive fluids. Strict formulation and process control ensure compliance with in-vehicle flammability and chemical exposure conditions, covering internal cabling for engine, body, lighting, and infotainment systems.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Process automation, petrochemical, and plant engineering sectors select this compound for instrumentation and control cable production demanding flexibility, low-temperature performance, and precision resistivity. CS O-3364 NT supports narrow-diameter, multi-core cabling for sensors, actuators, and robotics interfaces where movement, retraction, and small bending radii occur daily. Strict requirements for EMC shielding compatibility and resistance to process chemicals define this use case.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Facilities in transportation, public building, and safety-critical installations incorporate this compound into fire-resistant cable constructions to meet stringent flame propagation, smoke emission, and low-toxicity requirements. It plays a central role in fulfilling health and safety codes while maintaining mechanical integrity during exposure to fire, enabling continuous operation of emergency circuits and signaling.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Competitive AXELERON Cable Compound CS O-3364 NT prices that fit your budget—flexible terms and customized quotes for every order.
For samples, pricing, or more information, please contact us at +8615365186327 or mail to sales3@ascent-chem.com.
We will respond to you as soon as possible.
Tel: +8615365186327
Email: sales3@ascent-chem.com
Flexible payment, competitive price, premium service - Inquire now!
Every cable compound that leaves our reactors stands as a result of hard-earned expertise and daily problem-solving. AXELERON Cable Compound CS O-3364 NT grew out of constant dialogue with power cable makers, a push for cleaner processability, and the lessons our own operators learned while running batch after batch under strict conditions. We see firsthand how extrusion shops struggle with inconsistent material, downtime from compound-to-compound transitions, and variabilities in insulation performance after jacketing. One challenge always persists: stable, predictable results, especially in demanding medium and high voltage cable insulation and sheathing.
AXELERON CS O-3364 NT is a non-toxic, non-drip, stabilized polyolefin-based compound formulated to reduce bleed and migration even in high-temperature applications. Years of adjusting base resin and additive blends in our twin-screw lines taught us there’s no shortcut to reliable performance over a cable’s entire service life. Many cable builders want a compound that will not leech plasticizer or oil, will not sweat as ambient temperatures climb, and holds up under the electrical and mechanical stresses that run through an urban grid or a wind farm. Our team targeted these needs with multiple pilot runs, field tests, and cooperation with cable makers in both humid coastal and arid environments.
The backbone of AXELERON CS O-3364 NT is a carefully balanced polyolefin matrix, reinforced with antioxidants and process stabilizers proven to withstand the oxidizing atmosphere of high-speed extrusion. After seeing early blends struggle with material separation inside cable voids and cable core assemblies, we developed a blend where crystallinity, viscosity, and plasticization balance out. Customers working in vertical continuous vulcanization lines tell us that lowering exudation saves both time and materials—less need for cleanup, fewer worries about core sticking or trapped gases. Installers benefit as well, since a dry and clean cable core improves handling and jointing reliability in the field.
We manufacture the compound in controlled, closed systems to minimize airborne contamination or unwanted particle inclusion, since purity can make or break insulation integrity in grid and utility cables. Each batch undergoes melt flow and dielectric loss testing before leaving our plant, mirroring the same checks we monitor daily on our internal cables. Over the years, we learned that standardized processing windows—around 110°C to 140°C—match most cable extrusion gear, reducing adjustment time and easing product changeover for operators. CS O-3364 NT runs smoothly in both conventional and high-speed CV lines, handling the pressures and stresses that modern cable builders expect.
Cable compound is a crowded space, filled with both out-of-date formulas and “all-in-one” products that rarely deliver as claimed. A lot of products promise low migration, but the proof comes not in marketing, but in half a decade of cable digging and end-of-life inspections. In field return tests, AXELERON CS O-3364 NT shows significantly reduced sweating versus earlier petrolatum and wax-based fillers. Installers report no greasy residue after storage or trunking. The non-drip characteristic is more than a spec-sheet promise—a direct result of how we balance the compound’s viscoelastic range. By holding oil and low molecular weight plasticizer migration to a minimum, insulation life stretches beyond technical minimums, extending cable reliability even under load cycling and variable humidity.
We never chased unnecessary features: no excessive flame retardant loading, no over-pumped fillers just to hit a marketing bullet point. Instead, the focus stays on stable physical form, easy pellet handling, and elimination of batch-to-batch surprises. Many compounds claim non-toxicity, but few can trace raw materials and additive sources back to verified suppliers, with full regulatory documentation available for customer audits. As we stand behind the compound, we open our books to partners—no substitutions or unreviewed raw material changes make it into CS O-3364 NT.
Changing grid demands, renewable feed-ins, and the rise of smart grids have raised the bar for cable performance. Substation engineers now look for compounds that preserve dielectric integrity at higher frequencies, while solar and wind farms put cable cores under wide ranging ambient swings. AXELERON CS O-3364 NT found early adoption across different designs, from triple-extruded XLPE cable lines to bundled multi-core LV and MV utility cables. Our on-site testing racks mimic the stress conditions these projects face—thermal cycling, water immersion, salt fog, prolonged conductor heating—all under continuous monitoring by our own reliability teams. Through these trials, CS O-3364 NT has shown it doesn’t crack, shrink, or sweat even as insulation heats from 30°C ambient up toward 90°C operating conditions, or sits outside through freeze-thaw cycles.
Such robustness in compound construction means less risk of moisture pathways opening during installation bends, plowing, or cable pulling. Transition points at splice cases, joints, and connectors—historically weak spots for cable insulation—stay free of ooze, reducing risk of partial discharge or insulation tracking. Installation crews relay fewer complaints about handling feel or compatibility with other filling and bedding compounds; CS O-3364 NT shows wide compatibility across different resin-insulation types, as confirmed by repeated shop floor side-by-sides.
Factory feedback never stops, and neither does the pressure to reduce energy use and waste in production. We designed AXELERON CS O-3364 NT with energy-efficient thermal properties so extruder lines can run at moderate screw speeds without risk of unplanned gelation or residue buildup. Thermal load tests in our own plant showed up to 15% lower energy demand per ton when compared to older, petroleum-heavy compounds, measured over extended campaign runs. Cleaner handling also translates to less need for solvent wipe-downs and less airborne contamination risk in the cable core. These details matter when regulatory fines or recall costs can wipe out the savings gained from cheap, untested alternatives.
From an environmental, health and safety standpoint, CS O-3364 NT leans on non-halogenated chemistry and stabilized antioxidants that pass both RoHS and REACH standards. Air and water emissions during production are monitored in-house, since we share the same municipalities as our partners and neighbors. Product traceability extends to every pallet, so customers can identify the production history of their compound for any cable order—no wondering what batch got loaded, or which additives ended up in the mix.
The “feel” of a compound doesn’t show up in data tables, but it means everything on the factory floor. Operators tell us how poorly formulated compounds gum up hoppers or cake inside the extruder barrel after a few hours. We built AXELERON CS O-3364 NT to run clean—minimal dust in feed bins, consistent flow through gravimetric feeders, and no unexpected viscosity spikes even at the tail end of a reel. Molding and extrusion shop leads notice fewer unplanned downtimes and less nervousness during long campaigns or overnight runs, where batch consistency keeps overtime and maintenance calls down.
Maintenance teams appreciate how CS O-3364 NT resists sticking or fouling downstream dies and screen packs, compared with oil-filled or wax-heavy fillers. Cleanup cycles between runs drop by up to one third, and operators can keep shift logs spot-free after each campaign. These small, day-to-day wins free up line capacity and decrease total cost of ownership, as every cable mile requires less labor and fewer shutdowns for maintenance or rework.
Real-world reliability means pushing the limits outside sterile lab protocols. We run CS O-3364 NT through pressure and voltage cycling rigs designed to simulate actual end-use conditions. Field engineers pull cross-sections from cables exposed to years of water, heat, and physical flexing. Each time, the non-migratory recipe holds up—compound stays in place, electrical strengths remain high, and internal voids don’t fill with moisture. These post-mortem studies, built from direct partnership with utilities, reinforce every lab claim backed up by in-field evidence.
Feedback loops run right back to formulation. When we spot a rare bond failure or see signs of compound cold flow in customer returns, that data feeds the next tweak—whether by tightening particle size on stabilizer packages or replacing a specific plasticizer. Operators on our line are among the first to spot process issues, and their input determines what ends up in the next pilot batch, not just what looks good on a spreadsheet. Engineering controls also ensure that no cross-contamination from other compounds sneaks in during storage or transport, since compound purity translates to cable performance down the road.
Large infrastructure projects don’t allow for excuses or on-the-fly substitutions. In ultra-long trunk power cables laid under major cities, compounding resilience matters as much as conductor quality or insulation thickness. Back in 2021, a utility partner running extended length, armored MV cables for offshore wind saw parallel-run reels exposed to direct summer sun for weeks prior to installation. AXELERON CS O-3364 NT delivered consistent peel and cutback—cable cores stayed dry with no sign of sweating or bleedout, and cable tensioners ran clean reels day after day. Similarly, a mining operator in South America reported that cables embedded in wet rock tunnels held their design dielectric performance over years of immersion, with returned samples still showing the expected mechanical tear strength and pliability.
Service crews deploying new urban grid segments noticed a major difference between CS O-3364 NT and lower cost, unbranded compounds imported in bulk. Cleaning time before insulation stripping dropped by over 25%, and field techs reported zero complaints of oily residue—no tool slip, no contaminant transfer to the insulation. Over time, cable reliability claims tracked by third-party surveyors reflected lowered rates of premature insulation failure and moisture-induced shorts compared with older cable lines filled with off-spec compounds. These numbers come straight from return statistics—not from marketing, but from the crews trenches and cable yards, who work with these materials every day.
Every batch of AXELERON CS O-3364 NT sets out backed by our own operators’ pride and accountability. We encourage cable builders to share process hiccups, handling feedback, or unusual end-use outcomes. Field data pushes our technical teams to fine-tune melt index, antioxidant package, or anti-bleed stabilizer levels for future batches. Upgrade cycles stay regular, but we carry forward lessons learned from our own lines—no untested shortcuts, no hidden specification downgrades. In the rare event a field return shows change in compound characteristics outside of expected window, response teams close the loop with in-person investigation and shared determination of root cause.
Our lab benches don’t see the same ambient swings, grit, or pull tensions as an urban cable trench or offshore installation, so every tech visit, customer service call, or plant survey helps us calibrate the next blend of CS O-3364 NT. Everything comes back to building a compound that cable makers trust batch after batch, and service crews can pull from stock without second guessing. Continuous improvement isn’t a marketing checklist—it’s an operating principle driven by people who care about what they send out the door every day.
AXELERON Cable Compound CS O-3364 NT stands on solid practical experience, reinforced by direct production insights and ongoing relationships with cable manufacturers. Every property of the compound, from non-drip stability to precise pellet sizing, reflects years of practical engineering over dozens of plant-floor iterations. Its place in medium and high voltage power cable construction shows in installation time and reduction in service failures—outcomes that matter to both technical planners and the crews in the field.
CS O-3364 NT doesn’t aim to chase every passing compound trend. Instead, it aims for dependable performance, clear traceability, and a shared commitment to performance above specifications. Our doors remain open to new process feedback, and our production teams stand ready for the next round of cable innovation. With an eye on the future of power delivery, we keep refining AXELERON Cable Compound CS O-3364 NT—one batch at a time, informed by real-world needs and hard data.