| HS Code | 282045 |
| Product Name | UCON PAG Lubricant / Fluid TPEG 500 |
| Chemical Family | Polyalkylene Glycol (PAG) |
| Appearance | Clear, colorless to pale yellow liquid |
| Viscosity At 40c Cst | Approx. 95-105 |
| Density At 20c G Per Ml | 1.01-1.05 |
| Pour Point C | -40 |
| Water Solubility | Completely miscible |
| Flash Point C | Approx. 260 |
| Typical Applications | Lubricant, hydraulic fluid, compressor fluid |
| Thermal Stability | Good thermal and oxidative stability |
| Odor | Mild |
| Biodegradability | Readily biodegradable |
As an accredited UCON PAG Lubricant / Fluid TPEG 500 factory, we enforce strict quality protocols—every batch undergoes rigorous testing to ensure consistent efficacy and safety standards.
| Packing | UCON PAG Lubricant / Fluid TPEG 500 is typically supplied in 200 kg steel drums, featuring a secure, sealed lid and product labeling. |
| Container Loading (20′ FCL) | Container Loading (20′ FCL) for UCON PAG Lubricant / Fluid TPEG 500: 80 drums, 200 kg net each, total 16,000 kg. |
| Shipping | **Shipping Description:** UCON PAG Lubricant / Fluid TPEG 500 is shipped in sealed, corrosion-resistant containers such as drums or IBC totes. It should be transported under dry, cool conditions, away from direct sunlight and incompatible materials. Ensure containers remain tightly closed during transit. This non-hazardous product requires standard shipping practices. |
| Storage | UCON PAG Lubricant / Fluid TPEG 500 should be stored in tightly closed containers, away from moisture, direct sunlight, and sources of ignition. Store in a cool, dry, and well-ventilated area to prevent contamination and degradation. Avoid contact with strong oxidizing agents. Handling and storage areas should follow all relevant safety and chemical compatibility guidelines. |
| Shelf Life | UCON PAG Lubricant / Fluid TPEG 500 has a typical shelf life of two years when stored in sealed, original containers. |
As the original manufacturer of polyalkylene glycol technology, we offer UCON PAG Lubricant / Fluid TPEG 500 for diverse industrial sectors requiring precision formulation, advanced process control, certified performance, and compliance with international quality standards. Below, we outline the main downstream manufacturing applications and technical configurations used by our global clients.
TPEG 500 serves as a fundamental macromonomer in synthesizing polycarboxylate ether (PCE) water reducers for the concrete admixture industry. Manufacturers leverage our material’s regular molecular weight and terminal reactivity to ensure consistent flowability, slump retention, and anti-cracking performance within their formulations. TPEG 500 enters the copolymerization step with acrylic acid or MA, creating dispersants that work effectively in low water–cement ratio systems and aggressive mixing cycles.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
TPEG 500 functions as a core building block in the production of water-soluble synthetic lubricants and functional fluids. Industrial lubricant manufacturers use this material due to its stable viscosity index, excellent lubricity, and low volatility, enabling precise formulation of compressor lubricants, gear oils, and transmission fluids for use in diverse equipment fleets. The component reacts in controlled polymerization or acts as a diluent for blending with anti-wear additives, ensuring compatibility with energy-efficient machinery.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Global textile auxiliaries producers deploy TPEG 500 as a reactive intermediate in the synthesis of nonionic surfactants used for scouring, dyeing, and finishing. This material promotes stable emulsification and high-temperature alkali resistance, critical for consistent fabric treatment processes. It supports batch and continuous finishing lines, where stringent wash-out performance and low residue are essential for compliance and export-grade textile finishing.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Manufacturers producing foam control agents for paper, fermentation, and wastewater sectors incorporate TPEG 500 as a carrier and performance enhancer, allowing rapid foam knockdown and long-lasting suppression. The component’s balanced water/oil solubility makes it ideal for systems with variable pH and high-shear agitation. Proper selection secures compliance with food contact safety where appropriate and simplifies drainability in environmental units.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Specialty coolant producers employ TPEG 500 to enhance heat transfer, freeze protection, and system lubricity in advanced HVAC and industrial cooling systems. The component integrates in either base fluid or additive packages, allowing exact performance targeting for pumpability, low-temperature flow, and copper corrosion mitigation. This is crucial in large chillers, district energy networks, and refrigeration plants subject to international materials safety codes.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Competitive UCON PAG Lubricant / Fluid TPEG 500 prices that fit your budget—flexible terms and customized quotes for every order.
For samples, pricing, or more information, please contact us at +8615365186327 or mail to sales3@ascent-chem.com.
We will respond to you as soon as possible.
Tel: +8615365186327
Email: sales3@ascent-chem.com
Flexible payment, competitive price, premium service - Inquire now!
In our production facility, every batch of UCON PAG Lubricant / Fluid TPEG 500 runs through hands that have spent years perfecting the process. This material has become a standard part of operations where thermal stability, low residue, and lubricity matter more than corporate promises or shiny brochures. We produce TPEG 500 using controlled polymerization with strict attention to purity, chain length, and moisture control to deliver consistent, high-performing fluid. Each tote, drum, or tank shipment traces its roots back to raw materials we test and source for this exact job.
Our TPEG 500 stands out through practical experience seen on shop floors and in engine rooms—not from marketing copy, but from real-world performance. Workers in compressor maintenance, hydraulic operations, and metalworking have given direct feedback over the years, asking for lubricants that resist varnish and keep machinery cool under load. These requests drive our formulations and quality targets. TPEG 500 has a polyethylene glycol backbone capped with tailor-made terminal groups. This structure enables smoother operation at high temperatures, prevents the "coking" that clogs up lines, and makes it easy to clean during shutdowns.
Other fluids, especially mineral oils, often thicken when machines run hot or sit idle for weeks. We have put them side by side with our TPEG 500 and consistently see lower deposits and quicker restarts after downtime. PAG base chemistry avoids sludge formation—a point anyone who's had to scrub a gearbox by hand will respect. Where mineral oil leaves sticky residue, the TPEG 500 washes away with water, and plant crews notice the difference by lunchtime. Compared with polyalphaolefin or diester lubricants, TPEG 500 gives a more predictable viscosity curve under pressure and heat steps. This matters for engineers setting up critical oil films in turbines and precision pumps.
Our staff pays attention to the daily realities inside chemical sites, power plants, food production lines, and heavy manufacturing. Operators ask for lubricants they trust for their main lines, not just backup service. Overreliance on generic oils has led to failed bearings, costly shutdowns, and safety incidents in the past. TPEG 500 came about in response. We focused on reliability, minimized break-in periods, and easy post-use cleanout. End users often want to switch to water-based cleaning systems. With our fluid, flushing lines does not mean days of preparation or environmental headaches.
We've sat down with machinery designers who need to balance cost, uptime, and regulatory needs. Lubricant must not foam or drip when high-speed rotors start spinning. TPEG 500 resists shear under aggressive load cycles, keeping internal surfaces wet and cool. Viscosity index falls in a range that stays stable from cold startup through maximum rated system temperature. Chemical compatibility with seals, elastomers, and gaskets gives system engineers peace of mind—they don't have to keep changing out O-rings or testing for strange leaks.
Many plants these days are under pressure from regulators and insurance underwriters to reduce risk and improve maintenance records. Oil mist, failed gaskets, and sticky by-products often trigger audits and compliance events. By switching to our base fluid, maintenance records at several sites improved within a year. There's reduced emergency downtime, fewer costly lubricant changes, and less hazardous waste generated. Technicians spend their time on proactive projects, not cleaning messes left by lesser fluids.
On the market, lubricants come in every grade and aroma. Operators often try to save money by tallying up the apparent cost per barrel. What usually gets overlooked is the unseen price of premature failure, environmental compliance fines, and maintenance man-hours lost to cleaning up baked-on gunk. Our PAG fluid’s synthetic backbone does not oxidize the way mineral base stocks do. This point doesn't just live in charts—it shows itself in oil sample reports before and after long field trials.
Traditional oils attract contaminants, hold micro-abrasives, and drop in performance after every heat cycle. The TPEG 500 minimizes absorption of water and acids, keeping machinery internals cleaner over time. It doesn’t support microbial growth—big point for users who remember odor problems and filter blockages in water mix lubricants. Where biodegradable standards must be met, TPEG 500’s chemistry brings a lower environmental footprint and better waste water processing.
Some users compare our fluid to esters for eco-friendly production lines. While esters offer benefits, TPEG 500 outpaces them in thermal stability and does not break down to form acids at high loads. Maintenance managers rarely need to worry about acid build-up etching lines or attacking metals. In automotive test cells and aircraft component plants, equipment runs through thousands of cycles with stable lubrication and reduced frictional heating.
We have documented service lives up to twice as long as comparable mineral-based oils, verified by on-site analysis and ongoing customer reports. No need for frequent draining, expensive add-on purification systems, or complex supplier contracts. Work crews report fewer filter changes, and gearboxes run cooler to the touch after retrofitting to TPEG 500.
Ask any veteran plant engineer about critical areas in their facility: compressors, high-speed turbines, automated slideways, and vacuum pumps rise to the top. These sites require consistent, high-shear-resistant fluids. Our customers use TPEG 500 in these places because of its tolerance for repetitive thermal cycling and mechanical stress. Custom molding shops count on it for its non-staining, residue-free finish.
Power plant turbine maintenance crews have replaced legacy hydrocarbon oils with our PAG base fluid for both main bearings and auxiliary pump circuits. Their reports underline fewer varnish-related shutdowns and better startup lubrication after off-season layups. In food and beverage lines, where operators demand both cleanliness and safety, the water solubility of TPEG 500 lets them pivot from oil to water cleans fast and clear, avoiding downtime from contamination.
Gearbox production and test lines abuse lubricants intensely, running high loads for hours on test rigs. With TPEG 500, root cause analyses after unit teardown show little if any pitting or darkening. This outcome was not easy to come by—years of feedback and adaptations have streamlined our formulation, tightening up the molecular weight and distribution until the wear patterns dropped.
Some chemical plants require slip agents and lubricity promoters in polyethylene and ethylene oxide reactions, where consistent flow rates and shear must match. We supply them this fluid because it stays non-reactive and does not build up residues that can foul temperature or conductivity sensors. Many of these plants run traceability audits, and our sealed batch records and sample archives stand up to their scrutiny year after year.
Producing TPEG 500 in-house gives us control over every part of the process. We know the raw materials, monitor reactor conditions, and can pinpoint process deviations before they reach the customer. Our technicians collect fluid samples frequently and benchmark viscosity, water content, and pH. Out-of-spec drums do not get shipped. Years of process data let us predict seasonal, supplier, and environmental impacts before they hit full production.
We do not depend on third-party blenders or offsite bottlers. Our staff have developed process improvements—closed-loop controls, filtration upgrades, and mixing protocols—that reduce batch-to-batch variability. As market needs evolve and original equipment manufacturers raise their standards, we can adapt quickly and roll out field-proven improvements. Our quality control staff—some of whom started on the bottling lines or as maintenance techs—throw flag on any anomaly before it goes out our doors.
Customers notice. Bulk buyers in the plastics, automotive, and utility industries give direct feedback on performance swings. In-house production helps connect user reports and lab results. Issues like odd odor changes or unexplained residue always lead us to trace every step. Clients find comfort knowing the same hands and eyes have guided TPEG 500 from reactor to tote, season after season.
Beyond chemical purity and lab numbers, our experience says practical service defines a good lubricant. Technicians, engineers, and supervisors look for quick training, clear drum markings, and technical support that picks up the phone. We provide application notes built from equipment tests, not guesswork. New users call in for fitting advice or ask about flush and fill protocols—our team will answer based on data from field installations, not just lab bench results.
Some users want pre-lubricated components or kitted service sets for scheduled outages. We work with them to match viscosity, additive compatibility, and delivery volumes. Customers with specialized sealing materials—like Viton or EPDM—ask for side-by-side sample trials. We provide fluid samples promptly and work with them on measured comparisons.
Any feedback on foaming, separation, or pumpability gets back to our process engineers. We have changed vacuum dehydration times, post-filtration, and even minor monomer feed controls based on user experience. Partners in the field give us the best test environment—commercial equipment, real heat cycles, and unpredictable downtime. This loop keeps TPEG 500 relevant and constantly improving.
PAG chemistry brings safety and compliance edges hard to match with legacy fluids. TPEG 500 does not contain chlorine, heavy metals, or other persistent additives that regulators increasingly target. Maintenance reports confirm lower rates of spills that need hazardous clean-up. If leaks happen, water solubility means cleanup moves fast, without the stickiness or staining that keeps machinery down for hours or days.
Production sites working under ISO 14000 or similar frameworks value easy tracking for waste handling and disposal. Because our fluid avoids persistent organic pollutants and rapidly disperses with water, reporting and remediation paperwork take less effort. Lower fire risk—thanks to higher flash points and low vapor pressure—has translated into better insurance rates for several clients.
Worker safety is another underappreciated factor. Lubricants that do not fog or fume under heat cycles reduce the headaches and skin sensitivities among front-line staff. Spills simply wipe up with absorbent pads or, in some facilities, rinse down with water. Gearbox techs and pump overhaul crews have commented on cleaner work environments after switching from mineral or silicone oils to our PAG type. Breathing zones stay clearer, matting cleans easier at end of shift, and personal protective equipment comes home looking like it did in the morning.
Lubrication demands never stand still. Regulatory agencies keep asking for safer, greener, and easier-to-handle options. Machine builders focus on efficiency, longevity, and lower maintenance burdens. Our facility adapts by tweaking synthesis, running more in-depth purification, and partnering directly with additive researchers.
Both high- and low-viscosity variants of TPEG are in development. Some users need exterior compatibility for painted surfaces, others want tailor-fit friction reduction for experimental robotics. We have invested in instrumentation and software to monitor and log every TPEG 500 batch from the reactor through shipping. If a client identifies an odd outcome, our records let us trace back and adjust, closing the feedback loop for everyone in the supply chain.
Sustainability efforts drive some of our work. We are running pilot studies with customers using recycled process water and those with zero wastewater discharge targets. Our TPEG 500 integrates readily into these systems, standing up to repeated cycles and holding its performance over time. Field trials help us document not just short-term wins but lifecycle value—machine uptime, lower total oil use, and decreased environmental reporting costs.
Chemical manufacturing is only as good as the experience and knowledge underlying each run. We keep lab staff on hand who previously worked in industrial maintenance, polymer synthesis, and plant utilities. Their perspective lets us design better fluids and spot trends in performance. Every failure mode, from micro-pitting in high-load gears to filter plugging in hydraulic units, turns into process knowledge for the team.
Industry experts, visiting engineers, and field mechanics all contribute. Our open-door policy keeps the flow of information moving. When a new challenge arises—an unexpected reaction byproduct, compatibility issues with nonstandard seals, or demands for food or pharma registration—we gather staff in the lab and work the problem through to a practical, production-ready answer.
TPEG 500, at its core, reflects decades of on-the-ground requests, careful process control, and adaptation to evolving market and regulatory landscapes. Our commitment runs deeper than moving inventory. We see each filled container as a promise—crafted with input from maintenance teams, engineers, procurement staff, and compliance officers. This approach keeps our operation grounded and continually improving.
Operating as a direct manufacturer puts us close to our customers’ challenges. We hear about pump failures, tank cleanouts, corrosion damage, and staff turnover due to poor lubricant choice. Our field support, technical sales, and research group all exchange notes, sharing real results: months between failures, flush times, and worker satisfaction on the maintenance line.
Being transparent about batch processing, sourcing, and quality controls isn't just a regulatory checkbox. End users have the right to know what is inside the drum. This isn't just about compliance—it’s about trust and a good night's sleep for everyone who touches these fluids. We do not chase the lowest price per liter; we focus on the total value over years, thousands of hours, and countless operational cycles.
Long-term commitment has practical meaning. Many clients have run our TPEG 500 for years, tracked performance data, and witnessed cost savings through both improved uptime and lower ancillary costs. Regular communication and post-installation checks set us apart from generic suppliers. We listen to concerns, log outcomes, and feed those insights back into every upgrade.
Anyone walking the plant floor learns quickly what works and where frustration builds. UCON PAG Lubricant / Fluid TPEG 500 has become a steady performer not because of bold advertising, but due to direct experience, careful stewardship in production, and respect for the people who depend on it every day. The lessons learned through years of working side by side with equipment operators, maintenance techs, engineers, and safety officers show themselves in every batch leaving our gate. Customers looking for reliability, safe handling, regulatory compliance, and real operational feedback find their answers here, not just a label on a drum. That is the difference our manufacturing experience brings to every drop of TPEG 500 we produce.