| HS Code | 102916 |
| Product Name | UCON PAG Lubricant / Fluid 75-H-90,000 |
| Chemical Type | Polyalkylene Glycol (PAG) |
| Kinematic Viscosity 40c Cst | 90000 |
| Kinematic Viscosity 100c Cst | 21200 |
| Viscosity Index | 248 |
| Density 20c G Per Cm3 | 1.052 |
| Pour Point C | -34 |
| Flash Point C | 282 |
| Appearance | Clear, water-white liquid |
| Water Solubility | Miscible |
| Specific Gravity 20c | 1.05 |
| Typical Ph | 7.1 |
As an accredited UCON PAG Lubricant / Fluid 75-H-90,000 factory, we enforce strict quality protocols—every batch undergoes rigorous testing to ensure consistent efficacy and safety standards.
| Packing | The packaging for UCON PAG Lubricant / Fluid 75-H-90,000 is a 55-gallon steel drum, labeled with product and safety information. |
| Container Loading (20′ FCL) | Container Loading (20′ FCL): Typically, 80 to 100 drums (each 200 kg) of UCON PAG Lubricant 75-H-90,000 per container. |
| Shipping | **Shipping Description for UCON PAG Lubricant / Fluid 75-H-90,000:** UCON PAG Lubricant / Fluid 75-H-90,000 ships as a non-hazardous, synthetic polyalkylene glycol liquid in sealed drums or totes. Store upright, away from direct sunlight and moisture. Handle using standard procedures for chemical fluids. Ensure containers are tightly closed during transit and avoid extreme temperatures. |
| Storage | **UCON PAG Lubricant / Fluid 75-H-90,000** should be stored in tightly sealed containers in a cool, dry, well-ventilated area away from direct sunlight and moisture. Avoid contamination with water, acids, oxidizing agents, and other incompatible substances. Store at temperatures below 40°C (104°F) to maintain product integrity. Follow all applicable guidelines and safety data sheet (SDS) recommendations. |
| Shelf Life | UCON PAG Lubricant / Fluid 75-H-90,000 typically has a shelf life of 5 years when stored in unopened, original containers. |
As a direct manufacturer of UCON PAG Lubricant / Fluid 75-H-90,000, we serve a range of specialized industrial sectors. This product’s high molecular weight and unique polyalkylene glycol chemistry enable tailored performance in several precise downstream applications, reflecting both compliance and efficiency requirements in modern manufacturing environments.
UCON PAG 75-H-90,000 plays a critical role in the formulation of factory-fill and service hydraulic fluids used in automotive assembly lines. Its high viscosity stability, low residue formation, and resistance to hydrocarbon buildup meet the stringent demands of hydraulic press systems and robotic actuators running extended duty cycles. Additive compatibility allows precise blending with anti-wear and anti-foam packages, and users select the fluid based on the equipment's specific pressure and temperature range. Manufacturers rely on the product for its clean performance, supporting smooth operation and extended equipment lifespan.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
The chemical inertness and minimal residue of UCON PAG 75-H-90,000 make it an established base for food-grade compressor lubricants. Food manufacturers rely on its low volatility and water solubility to reduce carryover risk in compressed air systems where incidental food contact may arise. It aids in minimizing deposit formation, extending filter life, and enabling regular washdowns per sanitation protocols. The fluid remains stable under sustained high operating temperatures and is compatible with cleaning-in-place (CIP) processes, supporting food safety management systems.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
This PAG-based material serves as a key component in water-soluble polymer quenching fluids used during steel and alloy heat treatment processes. The controlled viscosity and thermal stability support uniform hardness and minimize crack risk in high-strength mechanical parts. UCON PAG 75-H-90,000 allows adjustability for the cooling rate by concentration, particularly in the manufacture of automotive, aerospace, and tool steels where performance certification is critical. Its predictable behavior enables tight process control, supporting compliance with industry specifications for case hardening and induction hardening applications.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Polyalkylene glycol structure gives excellent mold release properties, reducing surface buildup and facilitating demolding in high-volume polyurethane and elastomeric component production. This fluid contributes to non-silicone formulations where post-process bonding or painting is required. End users benefit from reduced downtime for mold cleaning, higher yields, and improved surface finish—factors essential to industrial manufacturing scales. Our technical support assists with blend optimization to align with local regulatory compliance and process conditions.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
UCON PAG 75-H-90,000 is incorporated in Yankee dryer lubricants to minimize stick-slip and control paper sheet release in tissue, towel, and specialty paper manufacturing. Its molecular properties allow for precise control of lubricity and thermal stability at high temperatures produced during the drying phase. Mills use this fluid to maximize cylinder surface protection, limit fouling, and maintain finished sheet quality. Its solubility in water also offers easy cleaning and helps mills comply with local wastewater discharge limits.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Competitive UCON PAG Lubricant / Fluid 75-H-90,000 prices that fit your budget—flexible terms and customized quotes for every order.
For samples, pricing, or more information, please contact us at +8615365186327 or mail to sales3@ascent-chem.com.
We will respond to you as soon as possible.
Tel: +8615365186327
Email: sales3@ascent-chem.com
Flexible payment, competitive price, premium service - Inquire now!
Every batch of UCON PAG Lubricant / Fluid 75-H-90,000 carries the mark of careful engineering at our facility. Through decades of work with polyalkylene glycol chemistries, our team has seen the evolution of lubricant expectations and applied real lessons from machine shops, chemical plants, compressor builders, and food processors. The goal remains clear: remove uncertainty from fluid performance, even in demanding applications that strain generic lubricants beyond their limits. Years of feedback from original equipment manufacturers, maintenance crews, and industrial partners have shown where ordinary fluids fall short. We make this grade for people who cannot tolerate outcomes driven by chance.
UCON PAG 75-H-90,000 stands out for its molecular craftsmanship. To get a polyalkylene glycol fluid to this viscosity—approaching 90,000 cSt at 40°C—and still maintain stable film with minimal foam, takes more than textbook quality assurance. Our technicians combine tight-feedstock control with constant monitoring, tuning polymer chain length and end-group composition for exact properties that ensure performance under shearing, pressure, and prolonged cycling. We test each batch with real-world shear, temperature ramping, and compatibility trials, not just lab glassware. That’s the comfort we want to pass on to customers: what leaves our site works on the plant floor, not just in theory.
Getting to 90,000 centistokes without wax-out, separation, or unpredictable viscosity index takes the right reactor management and process patience. It’s no secret some suppliers cut corners, introducing shortcuts that leave mystery residues or off-ratio blocks which later introduce contamination or instability. We do not treat chemistry like a commodity. Every drum gets shipped with a batch record, traceable from raw incoming glycol all the way to finished fluid—no blending, no fillers. There are no surprise thickeners or phthalate plasticizers: just engineered PAG, water white, tested for purity and property window.
Our involvement runs beyond shipping pallets from a warehouse. Our engineers have assisted end-users directly—troubleshooting real foaming issues in high-speed chains, working alongside compressor technicians to spot coke formation risks, and visiting lines that struggled with fluid deposits or varnish when using less-refined synthetic blends. Insights from those visits filter back into what goes in, and what stays out, of the 75-H-90,000 build.
We’ve seen the sorts of failures that happen when lubricants shear out under load or when an additive used just for price benefits starts corroding expensive seals. Our 75-H-90,000 doesn’t contain free alkali metals or unreacted base stocks. The formulation avoids weak links. Process control over molecular weight distribution keeps thickening consistent from winter startup to summer full-load, even in outdoor applications. Customers see less gumming in recirculating baths and fewer shutdowns from line choking. Pumps, valves, and seals last their expected life spans.
It doesn’t take long in the field to notice how much synthetic fluid quality can vary. Low-grade fluids never build a consistent lubricating film, especially in chain drives exposed to heavy splash or pulleys cycling for thousands of hours. Once a batch contains too many low-molecular fractions, film strength drops and mechanical wear jumps. High-viscosity fluids that aren’t properly processed form gels or develop hazes under working loads. Technicians chasing a leak soon see their time drained by repetitive repairs traced back to instability in the lubricant itself.
In contrast, the design of 75-H-90,000 is built around holding its shape under stress. The high film strength supports loads where gear slippage or micro-welding becomes a risk. Its temperature stability resists thinning, staving off drips or throw-off in high-heat applications. We checked this repeatedly with accelerated-aging tests under both air and inert nitrogen. What we ship matches our specs well past initial fill, so users don’t face surprises halfway through a maintenance cycle.
Compared to traditional mineral or polyalphaolefin oils, our PAG backbone means zero carbon residue, which eliminates many of the varnish complaints seen in varnishing-prone applications. There’s no sulfur or chlorine to risk chemical reaction down the line. Compared to generic PAG blends, we keep water content tightly controlled to prevent microbubble formation—a point users in hydraulics and high-pressure couplings have praised. In compressors, it stays clear and resists foaming, even under pulsed cycling.
Most of our customers aren’t filling a spec sheet—they’re keeping vital lines running. Over the years, facility managers in steel plants have shared how persistent lubrication failures held up entire production lines, only to see smooth uptime after switching to our 75-H-90,000 for their conveyor and oven chains. Factory lubrication technicians working with hot-melt lines or textile processes needed a fluid that would not carbonize on heated elements, and they found the nearly zero residue profile of this fluid quickly solved ongoing smoke, deposit, and cleanout issues. In food-contact environments where FDA incidental food contact status matters, we provide transparent documentation (including registration compliance) so that changeover goes smoothly for regulatory inspections.
Hydraulic lift system manufacturers look for extremes—enough body to cushion shocks, but low enough resistance for smooth fluid response during start-up, even on cold mornings. Our viscosity curve data, built from in-house real-system stress tests, shows stable operation over wide temperature swings. Food processors running automated packaging can’t afford dropouts or outgassing. Our recipe’s low volatility cuts down vapor release, so their lines run odor-free and avoid costly downtime from fluid loss.
OEM partners trust our process. Companies building chain drive systems, boiler conveyance, and gear actuators put our product through qualification trials before every purchase. They put stress on our shipments—testing for air-release rate, foaming during recirculation, and interaction with all elastomer seals found in their assemblies. We consistently get positive feedback for cleanliness, material compatibility, and holding viscosity under harsh cyclic conditions.
We prioritize technical engagement with customers. In years past, some competitors offered overbuilt additive packages to mask poor base fluid quality. That led to incompatibility with paints, rubber, and even other fluids in the plant. Our approach keeps the chemistry simple and reliable. Instead of patching weaknesses, we engineer the base PAG chain for strength and hydrolitic stability. The result: less deposit formation, greater cleanliness, and predictably long life.
Troubles often arise when someone swaps fluid types without understanding incompatibilities. Mixing in non-PAG residues creates soft sediments or micro-emulsions that plug lines. To help, we keep open channels to answer e-mails, calls, and in-plant consultations about conversions and flush-outs. When we supply 75-H-90,000 for a new system or retrofit, we support the process: recommending cleaning protocols, compatibility checks, and parameter monitoring to ensure the new fluid performs to its maximum potential. Maintenance teams appreciate direct, detailed guidance from the people who actually made the product.
In water-jacketed compressor systems, unchecked water ingress can ruin generic synthetics, either through foaming or by encouraging microbe growth. That outcome costs real money in downtime and cleanout. Our formulation, refined through feedback from multiple retrofit situations, shows remarkable resistance to fluid breakdown—even when exposed to intermittent moisture. We learned early on to keep a tight eye on water tolerance and worked with equipment builders to document safe performance curves.
Some operations that run under challenging electrical fields need fluids that stay quiet and resist static build-up. PAG chemistries bear the right insulating profile, and because our product leaves no conductive debris or carbon, users in electronics manufacturing trust our batch records and test sheets. That sort of trust grows only through continuous delivery of fluid that meets promised benchmarks.
It’s easy to find fluids with similar labels or spec numbers. Some may even use the PAG tag, but hidden differences shape how well a lubricant holds up under years of service. As the manufacturer, we can point directly to how fluid clarity, molecular weight dispersion, and water rejection are delivered—not merely hoped for. Unlike resellers rebranding drums from outside parties, we own the formulation and batch start-to-finish. Our formulation excludes non-reactive silicone thickeners or untraceable diluents. Each property—film build, anti-seize, deposit resistance—reflects design choices we can trace by lot number.
In the field, we hear about the consequences of using cheaper generic products: thicker fluids that shear quickly, poorly filtered batches that leave grit or bag out high molecular weight "gobs", and inconsistent trace elements that corrode fittings. We’ve seen synthetic lubricants separate after only a few months in hydraulics, requiring costly downtime and energetic flushes. By controlling every production step and offering lot-specific certification, we bring reassurance our bulk customers find hard to source elsewhere.
Our process values aren’t abstract. 75-H-90,000 does not rely on zinc, phosphate, or sulfur triggers to create film. Instead, it builds lubrication based on the inherent properties of the carefully tuned PAG polymer backbone. As a result, our fluid avoids common pathologies—metal staining, catalyzed oxidation, deleterious cross-linking with common hose or gasket compounds. This attention to chemistry and purity cuts hidden costs for end users, helping reduce both inventory risk and replacement rates.
Some industries still treat PAGs as specialty blends to be used sparingly. Others know their value on high-heat or high-load bearing surfaces. Our experience demonstrates that a correctly engineered fluid surpasses the old stigma of synthetic “unpredictability.” We learned over many years that improper chain length, off-ratio block co-polymers, or careless pH management lead to microbubbles, weight drop-out, and service headaches. By running constant real-life simulation on chain conveyors, high-speed spindles, and humid air compressors, we refine our output line from real-world failures and unexpected situations.
We avoid the temptation of using secondary additives as a crutch. Our polymer blend’s inherent thermal stability means users do not see the brown, sticky residues gumming up actuators or causing drag on slides as with some heavily-advertised synthetics. In time, maintenance cycles become cleaner, labor savings accumulate, and mechanical performance tightens. As manufacturers, we know it isn’t enough to send out a drum and offer generic support—our job continues as long as our product runs in your line.
Traceability isn’t a buzzword—it’s a necessity for anyone who’s ever had to answer an auditor or solve a root-cause shutdown. We track each ingredient from origin to drum, logging every step. This gives industrial partners the transparency needed to meet modern regulatory scrutiny and to justify choice-of-fluid to insurance or compliance departments. More than a claim of "food grade" or "FDA approval," our documentation spells out precisely which lot, plant, and test standard each barrel represents. This direct line to the chemistry helps buyers avoid regulatory headaches during recalls or safety reviews.
We avoid batch-mixing with non-PAG products and maintain clean, certified tanks reserved only for this production run, ensuring our fluid remains free of cross-contamination and off-spec buildup. For plants where food contact, pharmaceutical, or electronics purity rules apply, this means the risk of FDA or local regulatory challenge remains low. GLP and ISO standards are baked into both our plant and our records handling.
As a manufacturer, we learn quickest from field reports. A technical services representative knows that more gets solved walking a plant floor than exchanging emails. We encourage ongoing dialogue with customers—engineers, mechanics, and plant leads alike—to flag changes, anomalies, or success stories. That’s allowed us to fine-tune not just product, but document retention, emergency supply, on-site training, and advisory services. Our focus on traceable, honest, and verifiable operations gives added peace for those running twenty-four-hour facilities.
Some of the best improvements in 75-H-90,000 came directly from such conversations—the insight that a chain lube tested in a cold Canadian mill had room for even lower water content; the realization that a visible batch number helps a facility track usage by zone; or that a drum design tweaks improved oil transfer safety in tight control rooms. Because we don’t hide behind a distributor’s phone tree, users can reach those who engineer each medium into being. We treat each user’s challenge as an input into tomorrow’s batch.
Eco-conscious buyers increasingly want clarity on what their lubricants contain, where byproducts end up, and if anything in their lines raises recycling or wastewater treatment problems. We control raw material sourcing and minimize downstream discharges. UCON PAG 75-H-90,000 degrades more completely in biological treatment than traditional mineral or PAO base stocks, thanks to the engineered breakdown characteristics of our chain design. Labs confirm that absence of halogens, nitrites, and toxic metals reduces downstream disposal stress.
Customers working toward ISO 14001 or tighter sustainability targets benefit from this forward-planning. In-house experts frequently advise on waste-handling protocol, fluid collection, and even dilution recommendations that respect local discharge limits. Practical experience confirms: by keeping closer oversight of chemistry and documentation, the environmental cost of using this product is reduced at both the source and in final disposal.
Nothing replaces direct experience making and supporting a complicated engineered fluid from start to finish. Through close control, responsive improvement, and direct end-use support, we create more than a spec sheet promise—we give a user the real chance at less downtime, fewer headaches, and longer service intervals. UCON PAG Lubricant / Fluid 75-H-90,000 shows that with manufacturing care, commitment to feedback, and open-chemistry transparency, users can demand and receive more from their lubricating fluids.