| HS Code | 617310 |
| Product Name | UCON PAG Lubricant / Fluid 75-H-90,000, 30% AQ |
| Chemical Family | Polyalkylene Glycol (PAG) |
| Physical State | Liquid |
| Color | Colorless to light yellow |
| Odor | Mild |
| Viscosity | Approximately 90,000 cSt at 40°C |
| Water Content | 30% aqueous solution |
| Solubility In Water | Completely soluble |
| Pour Point | -40°C |
| Density | Approximately 1.1 g/cm³ at 25°C |
As an accredited UCON PAG Lubricant / Fluid 75-H-90,000, 30% AQ factory, we enforce strict quality protocols—every batch undergoes rigorous testing to ensure consistent efficacy and safety standards.
| Packing | The packaging is a 55-gallon steel drum, labeled "UCON PAG Lubricant / Fluid 75-H-90,000, 30% AQ," securely sealed. |
| Container Loading (20′ FCL) | 20′ FCL can be loaded with drums or IBCs of UCON PAG Lubricant/Fluid 75-H-90,000, 30% AQ, maximizing shipping efficiency. |
| Shipping | The chemical **UCON PAG Lubricant / Fluid 75-H-90,000, 30% AQ** should be shipped in tightly sealed containers, protected from moisture, heat, and direct sunlight. Ensure compliance with all relevant regulations, including proper labeling and documentation. Use approved carriers for chemical shipments and provide safety data sheets for safe handling and emergency response. |
| Storage | UCON PAG Lubricant / Fluid 75-H-90,000, 30% AQ should be stored in tightly sealed, corrosion-resistant containers in a cool, dry, well-ventilated area away from direct sunlight, heat sources, and incompatible materials such as strong oxidizers. Protect from moisture and contamination. Store at temperatures above freezing and below 40°C. Follow all local regulations and guidelines for the safe storage of chemicals. |
| Shelf Life | UCON PAG Lubricant/Fluid 75-H-90,000, 30% AQ typically has a shelf life of 24 months when stored properly. |
UCON PAG Lubricant / Fluid 75-H-90,000, 30% AQ supports key manufacturing sectors through its advanced cooling, lubrication, and process stability functionalities. As the original manufacturer, we provide this specialty polyalkylene glycol for several critical downstream production environments, confirmed by extensive batch testing and field validation.
Aluminum hot rolling mills select this fluid as the main synthetic base for their emulsified quench lubricant packages, securing precise temperature control and surface finish during continuous sheet and plate production. The high molecular weight grade stabilizes emulsions in demanding thermal cycles, helping roll shops meet stringent process repeatability targets.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Chemical plants producing PET resin adopt this lubricant grade as a water-soluble compressor coolant for high-pressure, oxygen-rich gas compression used in polycondensation. Its oxidative resistance and deposit control outperform mineral oils, minimizing shutdowns and maximizing oxygen compressor reliability during continuous operations.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Industrial bakeries select this polyalkylene glycol-based fluid as the foundational ingredient in synthetic lubricants for oven chain conveyors and rack bearings, especially in high-moisture bread lines. The hydrolytically-stable formulation resists carbonizing and gum formation, allowing operations to maintain conveyor function under aggressive thermal and wash-down cycles.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Tier-one suppliers to the automotive sector utilize this PAG fluid variant as a biodegradable hydraulic medium and die cooling agent in magnesium high-pressure die casting cells. The advanced thermal stability supports shot-to-shot process control, preventing gumming and corrosion across complex automated lines producing lightweight chassis and drivetrain parts.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
PU flexible foam manufacturers blend this PAG base into waterborne mold release agent formulations for vehicle seating plants. Its surfactancy and wetting support clean foam demolding, rapid cycle times, and extended tool lifespans, without silicone fouling or VOC overages.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Synthetic fiber extrusion lines add 75-H-90,000 PAG fluid to spinning finish packages to reduce filament friction, optimize antistatic properties, and enable high-speed wind-up in continuous nylon and polyester yarn manufacture. The nonionic nature ensures no yellowing or residue, critical for downstream dyeing uniformity.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Competitive UCON PAG Lubricant / Fluid 75-H-90,000, 30% AQ prices that fit your budget—flexible terms and customized quotes for every order.
For samples, pricing, or more information, please contact us at +8615365186327 or mail to sales3@ascent-chem.com.
We will respond to you as soon as possible.
Tel: +8615365186327
Email: sales3@ascent-chem.com
Flexible payment, competitive price, premium service - Inquire now!
Manufacturing and maintaining heavy machinery have always demanded lubricants that can actually stand up to real-world operating conditions. Downtime in production rarely originates from minor causes—more often, it stems from the gradual failure of basic but critical components. Gears, bearings, and seals live in a tough neighborhood filled with humidity, contamination, and relentless pressure. Over decades in specialty chemical manufacturing, I have watched the evolution of lubricants from basic mineral oils to highly engineered synthetics. UCON polyalkylene glycols (PAGs) changed the conversation for us. Among PAGs, UCON 75-H-90,000, 30% AQ stands out for its ability to function in demanding environments where typical oils tap out.
Polyalkylene glycols like UCON have long demonstrated superior resistance to carbon and varnish formation compared to mineral or PAO oils. One of the clearest signals of this came from customer feedback in hot-running textile plants and demanding compressor environments. Conventional gear oils and hydraulic fluids built up residues that choked bearings and forced shutdowns well before scheduled maintenance. UCON 75-H-90,000, with its unique molecular structure and high viscosity, brought a solution to this challenge.
The “75-H-90,000” model designates a higher molecular weight PAG base fluid, meaning that built-in viscosity and film strength far exceed lower-weight alternatives. This trait translates directly into longer-lasting protection under high load, higher thermal stability, and lower evaporation rates where many fluids lose their edge. In production lines—especially those processing paper, chemicals, and plastics—where bearings run at elevated speeds, this lubricant has provided a noticeable slow-down in wear rates. Fewer component failures meant real economic results for our customers, not just claims on paper.
Many industrial operators focus on temperature resistance as the main factor in lubricant selection, but the real test comes from how a lubricant behaves under cyclic loading and water ingress. PAGs like UCON 75-H-90,000 absorb much less oxygen while running hot. They dramatically reduce gum formation and keep valves and passages open and clean. Most mineral oils oxidize much faster, depositing sludge that demands teardown and cleaning. By moving to PAG-based formulations, operations managers achieved more predictable maintenance intervals and less downtime.
Water content changes everything in lubrication chemistry, especially for industrial users dealing with temperature swings or heat transfer requirements. For operations that manage heat-sensitive equipment or systems requiring both lubrication and cooling, UCON 75-H-90,000, 30% AQ presents a balanced approach. The “AQ” designation shows that 30% of the mixture consists of water, making it nonflammable in ordinary working conditions, safer to handle around hot motors or process lines, and less prone to fire hazards compared to hydrocarbon-based alternatives.
The addition of water reduces the overall viscosity, allowing the product to flow more easily at lower temperatures, which enables quicker startup and movement during cold-shock processes. In my experience supporting plants where freezing was an issue, this fluid eliminated start-up failures seen with thick gear oils. Operators appreciated not having to custom-blend with solvents or heat reservoirs. At the same time, once up to temperature, the fluid sustains a strong film thanks to the high molecular weight backbone PAG.
Corrosion control often receives less focus than it should, but in our work supporting users in paper mills, metal-forming machinery, and food processors, water dilution would previously increase the risk of rust in ferrous components. UCON 75-H-90,000, 30% AQ sidesteps this common problem. It interacts favorably with most elastomers and metal seals, forming micro-barriers that shield surfaces even with periodic water splash. Over decades, we have confirmed through customer site visits and wear studies that this product keeps pitting and corrosion in check far better than generic water-diluted mineral oils.
Machinery lubrication at scale comes down to a few key demands: protect moving surfaces, shed heat, resist breakdown, and operate safely in a busy workspace. UCON 75-H-90,000, 30% AQ finds use wherever there is a need for robust protection with added cooling or fire safety: paper processing lines, continuous casting equipment, food-grade conveyor systems, textile looms, certain compressors, calender roll bearings, and specialty hydraulic circuits.
Take high-speed calender rolls in the paper industry as an example—gears and bearings run for days under heavy load and vibration. The traditional mineral-based oils could not always prevent micro-welds and abrasive wear. UCON performed longer, visibly delaying surface scoring and requiring less top-up. In hot melt mixing or extruding plastics, where temperature management matters as much as clean lubrication, the 30% AQ formulation proved to absorb and carry off excess thermal energy, reducing hotspots which can degrade polymer finishes.
Safety remains a priority. In areas with open flames, such as ovens in textile finishing or curing lines, workers worry about lubricant mist catching fire. With its high water content and natural ability to resist ignition, UCON 75-H-90,000, 30% AQ sharply reduces this risk. Plants report fewer incidents and less anxiety during inspections by safety officers.
We have seen dozens of plant teams transition from mineral oils or PAO synthetics to UCON PAGs, sometimes with hesitation, and almost always with a set of expected questions. Will the new fluid gel or react with legacy lubricants? How will it interact with seals or hoses over years? Does it attract water from the air? Our field teams and tech support chemists have traced answers back to real-world lab and shop-floor trials.
The main lesson is compatibility. UCON PAGs do not mix with non-synthetic fluids; plant managers must clean systems carefully before switching. Any leftover hydrocarbons will separate out, sometimes clogging lines, so it pays to do a thorough flush. Once in operation, UCON PAG 75-H-90,000, 30% AQ resists mixing with most process contaminants and does not degrade like hydrocarbon chains under severe load. Rubber seals, especially those based on EPDM and fluorocarbon, perform longer with PAGs compared to mineral oils, with less shrinking or hardening.
Longevity and cleanliness matter in every maintenance budget. Several customers running compressed natural gas compressors found that switchovers to UCON 75-H-90,000, 30% AQ extended service intervals by months, saving significant labor hours and part costs. The water content helps with in-system flushing, as any dirt or old oil residues tend to suspend and exit with drained lubricant, particularly if system temperatures are kept above the dew point.
Comparing PAGs like UCON 75-H-90,000, 30% AQ to standard PAO and mineral oil lubricants highlights some core differences. PAGs resist hydrocarbon buildup, especially in high load or high temp service. In one test program, gearboxes running at continuous 180°C with standard mineral oil showed a tenfold increase in varnish and carbon in only a few months, leading to unplanned bearing swaps. Side-by-side, the same system filled with UCON 75-H-90,000, 30% AQ kept gears free of deposits well past normal service intervals.
This performance does not come solely from base oil chemistry. The water component plays a unique role. Many competitive lubricants struggle at extreme temperatures, either thinning out or leaving stubborn residues. In contrast, the water in the UCON blend facilitates heat removal while the high-molecular PAG structure still protects moving surfaces. This dual-action approach has delivered solid results in rolling mills, high-speed conveyors, and continuous process lines where precision matters.
One distinction users note is the product’s impact on power consumption. Lower friction coefficients measured in actual customer machinery often lead to measurable energy gains. While energy savings sometimes come across as a marketing sound bite, rigorous customer meter readings have shown reduced amp draw on loaded machines lubricated with 75-H-90,000, 30% AQ compared to traditional oils. Over time, these gains translate to significant electricity cost reductions for large operations.
Separation capability in the presence of water remains key in many settings. Standard mineral gear oils do not tolerate even small levels of water well—they emulsify, leading to oil breakdown and corrosion risk. UCON 75-H-90,000, 30% AQ deals differently with water ingress. Even after accidental exposure—leaking cooling coils or spray-off in open gears—the fluid maintains its load-carrying capability, and any excess water can be drained off with regular monitoring.
Shifting to water-based PAG lubricants offers more than mechanical benefits. Environmental compliance pressure in manufacturing industries has pushed safety and sustainability into the spotlight. Most mineral and PAO oils pose disposal headaches and environmental risks, especially in cases of leaks or accidental releases. UCON 75-H-90,000, 30% AQ’s aqueous content makes the product inherently lower in volatility and safer to work with; it evaporates less and carries less risk if it contacts the skin or shop floor surfaces. In food and beverage lines, this formulation passes many incidental contact requirements, though users should check appropriate regulatory status for their region.
We once supported a major bakery chain that struggled with airborne lubricant mist causing both sanitation headaches and slick walking surfaces. Swapping to this water-based PAG drastically cut misting, which made cleanup easier and helped the site meet strict food safety audits. The switch brought peace of mind to operators concerned about inhalation risks and consistent performance in tough ambient conditions.
Disposal practices also shift. Conventional used oils frequently require hazardous waste management and expensive collection programs. UCON 75-H-90,000, 30% AQ, due to its water-based makeup, simplifies waste handling as it carries lower environmental toxicity. Several clients running large centralized systems have reported reduced reporting burdens and lower fines tied to leaks or accidental discharges.
Odor levels in the workplace improve as well. Working in hot mechanical rooms often meant exposure to unpleasant fumes from heated mineral oils. The switch to UCON meant cleaner air, a benefit frequently brought up by shift operators and line foremen. While this might seem secondary, plant managers know that employee comfort leads to safer work habits and better retention over time.
Based on years of overseeing customer conversions, the most successful programs start with careful planning. Existing lubrication systems must be thoroughly purged of mineral and PAO oils—dragging old residues into the new PAG environment causes reliability problems. Our technical advisors consistently encourage clients to use strong system cleaners or a pre-rinse with a neutral PAG before filling with the 75-H-90,000, 30% AQ grade. This one step prevents years of filter blockages or foaming.
Monitoring continues after startup. Water levels in the blend require regular checks, especially if the system heats above the boiling point for prolonged periods. Operators often measure viscosity or use a refractometer to confirm that the right blend persists throughout the year. This diligence pays off, as running the blend at too high or too low a water percentage alters the balance of cooling and lubrication, affecting performance.
Component inspection intervals tend to stretch out after the switch. UCON users notice that just looking inside gearboxes or sumps reveals much cleaner metallic surfaces, and filters hold less sludge. Some food plants perform annual photographic comparisons of bearings pre- and post-switch—management teams find it easier to justify the investment in premium PAG blends by pointing to physical reductions in wear and contamination.
Staff retraining remains a must, not only for lube techs but also for line operators. Handling procedures change: leaks can usually be wiped up with water, and spills are less slippery, but the system’s chemistry and flush recommendations must be followed to prevent costly surprises. We support customers with guides, on-site walk-throughs, and troubleshooting materials to smooth the adoption curve.
Manufacturers are gravitating to specialty lubricants like UCON PAG 75-H-90,000, 30% AQ due to both workplace safety and tighter regulatory scrutiny. As global limits emerge for workplace air quality, chemical exposure, and plant discharge, lubricants with high flash points, low volatility, and natural water content look increasingly attractive. Experience tells us that the move toward sustainable production does not have to force operators into a corner—switching to more sophisticated aqueous PAG blends brings measurable returns in performance and peace of mind.
In all the technical data and testimonials we have gathered over the years, one through-line remains: UCON 75-H-90,000, 30% AQ simply holds up where many fluids break down. Whether it is slowing down gear pitting, preventing catastrophic failures from unchecked oxidation, or making life easier on workers who handle it daily, the product has proven itself. As we continue to refine our formulations and watch how industry needs keep evolving, drawing from real-world plant installations and user feedback will keep us at the forefront of safe, efficient lubrication chemistry.
Experienced chemical manufacturers know that reputation comes not just from product labels, but from how well a fluid works across complex, unpredictable environments. Every new customer who puts UCON PAG Lubricant / Fluid 75-H-90,000, 30% AQ into service gives us another story and new data to sharpen our practice for the next challenge.