Dow Inc

Products

UCARSOL Gas Treating Solvent LE

    • Product Name: UCARSOL Gas Treating Solvent LE
    • Chemical Name (IUPAC): 2-[(2-aminoethyl)amino]ethanol
    • CAS No.: 113798-35-9
    • Chemical Formula: Mixture of MDEA (C5H11NO2) and Piperazine (C4H10N2)
    • Form/Physical State: Liquid
    • Factroy Site: Yudu County, Ganzhou, Jiangxi, China
    • Price Inquiry: sales3@ascent-chem.com
    • Manufacturer: Dow Inc
    • CONTACT NOW
    VTB
    Specifications
    HS Code 764563
    Product Name UCARSOL Gas Treating Solvent LE
    Type Amine-based gas treating solvent
    Form Liquid
    Color Clear to pale yellow
    Odor Mild amine odor
    Density Approximately 1.02 g/cm3 at 20°C
    Flash Point Over 93°C (closed cup)
    Boiling Point Greater than 100°C
    Solubility In Water Completely miscible
    Ph 10-12 (as supplied)
    Application Removal of acid gases (CO2 and H2S) from natural gas
    Typical Usage Temperature 40°C to 60°C
    Corrosivity Low
    Vapor Pressure Low at room temperature
    Viscosity Approximately 3-5 cP at 25°C

    As an accredited UCARSOL Gas Treating Solvent LE factory, we enforce strict quality protocols—every batch undergoes rigorous testing to ensure consistent efficacy and safety standards.

    Packing & Storage
    Packing UCARSOL Gas Treating Solvent LE is packaged in a 55-gallon steel drum, with clear hazard labeling and secure, leak-proof sealing.
    Container Loading (20′ FCL) Container Loading (20′ FCL) for UCARSOL Gas Treating Solvent LE: Ships in sealed drums, 80-100 drums per 20′ container, ensuring secure transport.
    Shipping UCARSOL Gas Treating Solvent LE is shipped in approved, corrosion-resistant steel drums or bulk containers. Each shipment complies with applicable transportation regulations. Proper labeling and documentation ensure safe handling. The solvent should be stored upright, in a well-ventilated, dry area, protected from extreme temperatures and direct sunlight during transit.
    Storage UCARSOL Gas Treating Solvent LE should be stored in tightly closed, properly labeled containers in a cool, dry, and well-ventilated area, away from direct sunlight, heat sources, and incompatible materials such as strong oxidizers. Secondary containment is recommended to prevent spills. Ensure access to emergency eyewash and showers. Follow applicable regulations and safety data sheet (SDS) guidelines for storage and handling.
    Shelf Life UCARSOL Gas Treating Solvent LE has a shelf life of two years when stored in unopened containers under recommended conditions.
    Application of UCARSOL Gas Treating Solvent LE

    Applications of UCARSOL Gas Treating Solvent LE in Industrial Manufacturing

    UCARSOL Gas Treating Solvent LE plays a specialized role across gas processing industries, especially where stringent control of acid gas impurities such as CO₂ and H₂S is essential for downstream operations. As the original manufacturer, we support downstream partners by delivering tailored guidance on regulatory alignment, precise formulation rates, direct process introduction, and end-product performance reliability.

    1. Natural Gas Sweetening

    Natural gas processing facilities deploy this solvent in high-performance amine gas treating units to selectively remove carbon dioxide and hydrogen sulfide from raw natural gas feeds, supporting specification compliance for pipeline distribution and liquefaction. The solvent's performance consistency aids in controlling regeneration energy costs and preserving downstream catalyst activity in LNG or petrochemical units.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    2. Refinery Fuel Gas Desulfurization

    Refining operations use this chemical to remove H₂S from fuel gas streams derived from hydroprocessing, fluid catalytic cracking, and other refinery units. Existing amine systems upgrade to this solvent to reduce emissions at sulfur recovery units and maintain low-sulfur standards in process fuel applications, facilitating compliance with environmental air quality mandates.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    3. Synthesis Gas Purification (Syngas)

    Ammonia, methanol, and hydrogen production plants integrate this gas treating solvent in their syngas clean-up processes, where precise scrubbing of acid gases prevents catalyst degradation and ensures process continuity. The solvent supports high gas flow rates and operates under varying temperature and pressure profiles characteristic of syngas production environments.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    4. Biogas Upgrading

    This solvent is applied in biogas upgrading plants to ensure compliance with grid injection standards and renewable gas certifications. By providing efficient CO₂ and H₂S absorption from anaerobic digestion offgas, the product enables operators to reach stringent purity targets for renewable natural gas while managing solvent consumption and minimizing process downtime.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    5. Tail Gas Treating in Sulfur Recovery Units

    Sulfur recovery facilities implement this solvent in tail gas treatment units (TGTU) to absorb residual H₂S following Claus process reactors. Integration ensures ultra-low emissions, contributing to regulatory targets for air quality, and prevents sulfur loss at refineries and gas processing plants by allowing recovery of additional H₂S for conversion into elemental sulfur.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    Free Quote

    Competitive UCARSOL Gas Treating Solvent LE prices that fit your budget—flexible terms and customized quotes for every order.

    For samples, pricing, or more information, please contact us at +8615365186327 or mail to sales3@ascent-chem.com.

    We will respond to you as soon as possible.

    Tel: +8615365186327

    Email: sales3@ascent-chem.com

    Inquiry

    Get Free Quote of Dow Inc

    Flexible payment, competitive price, premium service - Inquire now!

    Certification & Compliance
    More Introduction

    UCARSOL Gas Treating Solvent LE: Raising the Bar for Efficient Gas Processing

    Building on Decades of Manufacturing Experience

    In our years behind the scenes as a chemical manufacturer, we’ve learned that when process efficiency unites with reliability, operational headaches begin to fade. We’ve produced thousands of tons of amine solvents over the decades, each generation reflecting the challenges and priorities we hear from operators, plant managers, and ESG stakeholders in gas plants. This hands-on experience fuels every formulation in the UCARSOL Gas Treating family, but the LE model holds a special place thanks to its combination of operational stability and commitment to lowering environmental impact.

    What Makes UCARSOL Gas Treating Solvent LE Distinct

    UCARSOL Gas Treating Solvent LE is a specially engineered solution targeting acid gas removal from natural gas and refinery gas streams. LE stands for “Low Emission” — a name rooted in its actual results, not just a marketing badge. This solvent uses a unique blend that optimizes hydrogen sulfide (H2S) and carbon dioxide (CO2) capture while reducing volatile emissions during regular operation and routine maintenance. With growing scrutiny on fugitive emissions and stricter venting regulations, we recognized that many plants using legacy MDEA, DEA, or blended amines faced both higher solvent loss and compliance challenges.

    Through working directly with process engineers on-site and participating in field trials, our technical team fine-tuned the LE model to minimize evaporative loss and lower reboiler heat duty, thus offering tangible reductions in both chemical costs and energy usage. This isn’t an accidental outcome — it’s the result of thousands of hours spent tracking plant performance, testing solvent makeup rates, and measuring actual acid gas slip under real-world conditions.

    Solvent Properties and Operational Advantages

    Operators using UCARSOL Gas Treating Solvent LE tell us that its stability across a range of gas compositions sets it apart. Our manufacturing process secures a tight molecular weight distribution, so the solvent’s performance doesn’t bounce around with changes in gas flow or load. With a carefully controlled physical and chemical structure, LE handles sour gas feeds containing both hydrogen sulfide and carbon dioxide without the foaming, corrosion, or viscosity drift that can beset more basic amine blends.

    Many plants running traditional amines report sharp solvent losses, especially in hot climates or with high circulation rates. LE’s formulation addresses this by substantially reducing solvent carryover with the treated gas and cutting evaporative loss at both absorber and regenerator. These changes don’t just mean fewer drums ordered each month—they simplify environmental reporting and align with stricter site emissions targets. By reducing amine misting and emissions, we also see improved downstream reliability, as spent amine contamination in sulfur recovery or tail gas units drops off.

    Tackling Operational Pain Points

    As a manufacturer, we speak constantly with engineers about two persistent frustrations: high energy bills from solvent regeneration, and fouling in columns from solvent degradation. Older generations of amine, while effective for basic H2S removal, demand high reboiler duty to maintain sweet gas output. These repeated energy expenditures become more pronounced when sour gas composition drifts or seasonal temperature swings push plants outside their normal process window. The LE model’s thermal characteristics mean operators can cut reboiler steam loads and still meet pipeline or sales gas specifications, especially in multi-million standard cubic foot per day (MMSCFD) units.

    Solvent degradation product buildup not only shortens the effective life of the amine but also triggers corrosion in mild steel piping and alloy columns. Over the last decade, our field support teams observed that under real-world cycling — rapid startups, frequent lean/rich swings, and a high sulfur slip—traditional amines accumulate heat-stable salts and organic acids. We reformulated LE to slow this runaway buildup. Operators now see longer solvent changeout intervals and less sludge formation in knock-out drums and filter housings. The ability to run at lower circulation rates reduces strain on pumps, heat exchangers, and mixers.

    Where UCARSOL Gas Treating Solvent LE Excels

    While solvent selection usually depends on inlet gas makeup, plant design, and product specs, experience has shown us consistent value with LE in applications seeking to control both emissions and OPEX. Sweetening natural gas ahead of LNG trains, conditioning refinery fuel gas, or treating biogas with high variable CO2 loads—LE holds performance steady without sudden foaming upsets or rapid degradation in extreme climates.

    Process engineers at midstream gas facilities report that, by switching to LE, they capture high levels of acid gas (down to less than 2 ppm H2S) even as CO2 levels spike. This translates into contracts met for pipeline gas and less need for blending or rerouting off-spec volumes. We’ve witnessed operators hit sales gas specifications with fewer chemical adjustments and less unplanned downtime due to solvent foaming or carryover incidents.

    Lowering Life-Cycle Costs Through Purposeful Chemistry

    It’s easy to fixate on solvent price per drum, but over the long haul, true cost comes in total consumption, reboiler duty, downtime, and regulatory fees. Plants that switched from straight MDEA or DEA tell us that LE’s lower volatility saves four to eight times in solvent makeup compared to their old programs. A lower average loss rate, measured over a 12-month cycle, shrinks chemical ordering headaches and slashes waste. This reduction not only helps the bottom line but supports better reporting to regional regulators and fits corporate sustainability mandates.

    Reboiler energy draw presents another opportunity for operational savings. With LE’s ability to strip acid gases at lower temperatures, steam requirements decrease—an advantage especially in regions with high fuel rates or energy use taxes. We’ve become used to requests for plant assessments focused not on maximum gas loading, but on how to turn down energy and still hit contract specs. The LE model delivers in this niche, offering plants a smoother ramp during off-peak flow and less concern about thermal stability drift.

    Cleaner Maintenance and Easier Reporting

    Anyone who’s spent a shutdown in a gas plant knows the mess that comes with spent amine. Corrosion fouling, hard deposits in reboilers, and the persistent odor from degraded solvents all add time and safety risks to turnaround jobs. LE cuts back on the byproducts that drive these headaches. By limiting heat-stable salt and organic acid formation, maintenance teams find cleaning and reassembly go faster. Inspection reports show fewer pitting issues and smoother surfaces inside carbon steel sections.

    Regulators put increasing scrutiny on amine plants for both air and water emissions. Because LE loses less solvent through dryers or absorbers, stack and vent reporting stays well within limits. This data matters during audits or surprise compliance inspections. Fewer off-spec events mean a quieter life for compliance officers and fewer production disruptions.

    Comparisons with Traditional Amines

    In our direct lab and plant field trials, standard amines like MDEA, DEA, or some proprietary blends fall short under demanding conditions—high throughput, swinging acid gas load, or tight sulfur removal requirements. Their volatility leads to higher emissions, while their degradation profile makes for frequent changeouts and more aggressive corrosion. By focusing on minimizing evaporation and reducing chemical reactivity, LE lengthens both solvent and equipment asset life.

    Another difference shows up in acid gas selectivity. Certain older amines absorb both H2S and CO2 indiscriminately, forcing higher regenerator loads and boiling up more solvent than necessary. LE possesses selectivity characteristics tuned through rigorous fieldwork, pulling H2S to pipeline-grade specs without dragging excessive CO2 into the process. These facts translate into tangible process control benefits, less unplanned acid gas slip, and more predictable product output.

    Real-World Results: Case Studies Speak Clearly

    Years of manufacturing and field support have let us gather data from real plants, not just controlled lab conditions. At a southwestern U.S. gas processing facility, switching from DEA to LE reduced annual amine makeup by 37% and dropped reboiler energy draw by over 20%. Operators recorded smoother startup transitions and less acid gas slip despite seasonal feed composition changes. In a Middle East refinery, LE improved plant uptime by minimizing foaming episodes, saving nearly 10 man-days a year in downtime compared to their former mixed-amine system.

    In both cases, maintenance reports backed up the chemistry: inspectors found fewer corrosion patches and smoother tower internals after a full turnaround cycle. Our own technical support witnessed fewer off-spec gas events and quicker reconciliations during regulatory audits. These aren't isolated stories, but part of a pattern we see in plants that treat the solvent not as a commodity, but as a partner in plant reliability and compliance.

    Challenges and Continuous Feedback

    No solvent, no matter how carefully engineered, eliminates every issue. Highly variable gas feeds—such as biogas with unpredictable CO2 surges or wet gas containing heavy organosulfur compounds—can still overwhelm column design or push LE outside optimum conditions. LE’s resilience here helps, but operators face tradeoffs between stripping versus circulation rate, or between tighter sulfur removal and increased filtration needs. Our support teams get calls about adjusting lean/rich amine ratios or using slipstream filtration to stretch solvent life during periods of high load.

    Foaming used to be a recurring problem in amine units, especially where feedwashing or knock-out drum performance drops due to slugging. LE’s anti-foam characteristics slow foam development, though plant teams still need to watch for particulates or hydrocarbon contamination. We’ve partnered with dozens of sites to integrate upstream filtration and frequent solvent analysis, in order to limit the kind of fouling that triggers foaming no matter the solvent.

    Supporting Continuous Improvement and Customer Partnerships

    Decades of manufacturing and field stewardship have shown us that staying close to end users matters as much as the chemistry itself. Every year brings new emission limits, tougher water discharge rules, and an increasing focus on sustainability. We don’t just ship containers—we routinely dispatch technical staff into the field, working right alongside plant teams during startups, shutdowns, and planned changeouts. The best ideas for product tweaks have come out of these trenches, not out of the lab.

    Product development for LE leaned heavily into persistent plant issues: rising costs from high solvent consumption, inconsistent acid gas slip, and nagging corrosion between turnarounds. By listening to operators and verifying changes on the ground, improvements could be tested over full operating cycles and scaled up only when results proved themselves. In doing so, we’ve managed to keep both OPEX and compliance headaches down for our customers.

    The Path Forward in Gas Treatment

    Market forces, regulatory demands, and climate considerations keep gas treatment plants in a constant state of evolution. While new gas compositions—such as mixed biogas or retrofitted acid gas removal systems—pose unique chemical challenges, our philosophy remains fixed: solve problems based on real plant performance, not just theoretical specs. UCARSOL Gas Treating Solvent LE continues to get updated as downstream requirements change, whether through modifications to reduce environmental persistence or through new blending techniques to capture tougher contaminants.

    Run-of-the-mill solvents can knock out H2S and CO2 in laboratory glassware, but out in the field, repeatable reliability, manageable environmental footprint, and straight-shooting economics make the difference. By honing the LE model through test campaigns, audits, and relentless post-mortem data analysis, we make updates based on measurable plant-wide results—not on generalized property claims or standardized promotional copy.

    Looking Beyond Commodities: Real-World Performance and Trust

    As a manufacturer, we stand behind UCARSOL Gas Treating Solvent LE because it answers persistent problems faced by real gas plants, not in a vacuum, but by feeding back data and learning from every deployment. The improvements in emission loss, equipment longevity, acid gas selectivity, and OPEX have all grown from continual collaboration with those running the units, cleaning the towers, and reconciling the regulatory ledgers. Each barrel we ship comes with a legacy of fine-tuning, failure analysis, and hands-on support.

    While industry benchmarks and datasheets offer useful comparisons, true value is found in day-to-day efficiency, less frequent intervention, and a solvent that supports tighter reporting and operational goals without trading off against performance or asset health. The chemistry inside UCARSOL Gas Treating Solvent LE reflects this philosophy—every tweak is made in the field, not the boardroom.

    For those weighing solvent choices between commodity amines and performance-based engineered blends, the decision often comes down to operational track record, visible cost reductions, and clean billings from both the maintenance team and the compliance officer. UCARSOL Gas Treating Solvent LE, grounded in years of manufacturing grit and backed by eyes-on-field support, delivers on all these fronts—cutting through the static of technical lingo and putting plant productivity at the forefront.