| HS Code | 276765 |
| Product Name | UCARSOL Gas Treating Solvent HS |
| Product Type | Amine-based solvent |
| Primary Application | Gas sweetening and acid gas removal |
| Physical State | Liquid |
| Color | Colorless to pale yellow |
| Odor | Aminic |
| Solubility In Water | Completely miscible |
| Ph | 10-12 |
| Boiling Point | Approximately 100°C (212°F) |
| Specific Gravity | Approximately 1.07 at 20°C |
| Freezing Point | -10°C (14°F) |
| Flash Point | >110°C (230°F) |
| Chemical Family | Amines |
| Major Components | Aqueous blend of amines and activators |
| Typical Use | Removal of H2S and CO2 from natural gas and refinery gas streams |
As an accredited UCARSOL Gas Treating Solvent HS factory, we enforce strict quality protocols—every batch undergoes rigorous testing to ensure consistent efficacy and safety standards.
| Packing | UCARSOL Gas Treating Solvent HS is typically packaged in 55-gallon (208-liter) steel drums with secure, chemical-resistant lids. |
| Container Loading (20′ FCL) | Container Loading (20′ FCL) of UCARSOL Gas Treating Solvent HS: 80 drums per container, each drum contains 210 kilograms, total 16,800 kilograms. |
| Shipping | UCARSOL Gas Treating Solvent HS is shipped in approved, tightly sealed containers such as steel drums, totes, or tank trucks. Transport follows all relevant regulations for chemical handling, with clear labeling and documentation. Ensure secure, upright placement and protect from excessive heat or freezing during transit to maintain product integrity. |
| Storage | UCARSOL Gas Treating Solvent HS should be stored in tightly closed, labeled containers in a cool, dry, and well-ventilated area, away from direct sunlight, sources of ignition, and incompatible substances. Ensure secondary containment to prevent spills and environmental contamination. Follow local regulations and safety guidelines, and keep the storage area equipped with spill response materials and appropriate personal protective equipment. |
| Shelf Life | UCARSOL Gas Treating Solvent HS has a shelf life of 24 months when stored in unopened containers at recommended conditions. |
UCARSOL Gas Treating Solvent HS is engineered for advanced sour gas processing across several demanding industrial applications. As a specialized manufacturer, we support industries that require reliable absorption and removal of acid gases from process streams, ensuring safety, compliance, and downstream product quality. Below are primary application areas for our solvent, with tailored integration details for each sector.
Natural gas processing plants utilize this solvent in amine-based acid gas removal units to extract hydrogen sulfide (H2S) and carbon dioxide (CO2) from raw natural gas feeds. Operators value its ability to maintain stringent outlet gas specifications, optimize solvent circulation rates, and limit corrosion, all while conforming to environmental and safety compliance frameworks. The material fits into regenerative loop systems, where optimal solvent concentration directly correlates to feed gas composition, plant flow rates, targeted H2S/CO2 removal, and energy consumption constraints.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Refineries deploy the solvent for sour gas scrubbing in process streams that generate H2S-rich gases, such as fluid catalytic cracking units, hydrocrackers, and coker off-gas handling. The solvent enables stable continuous operation, ensuring treated fuel gas meets internal and external sulfur emission limits. Each refinery employs unique operating envelopes, and the solvent's resistance to thermal degradation under high process temperatures and variable acid gas profiles ensures reliable long-term integration with existing amine regeneration infrastructure.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Chemical plants utilize the solvent during syngas purification to remove acid gases from synthesis gas derived from natural gas or coal. This ensures downstream catalysts are protected from poisoning in processes such as methanol production, Fischer–Tropsch synthesis, and ammonia synthesis. Operators adjust operating parameters for variable CO2 and H2S levels, integrating advanced solvent monitoring to ensure trace acid gas content aligns with catalyst manufacturer warranties and downstream process thresholds.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Renewable energy producers use the solvent in upgrading systems for raw biogas from anaerobic digesters or landfill sources. The main goal is to remove H2S and CO2 to meet renewable natural gas (RNG) grid injection standards and biomethane vehicle fuel requirements. The solvent performs efficiently at biogas plant operating conditions, with performance tuned according to inflow composition variability and fluctuating organic contaminant loads.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Thermal power plants, particularly those burning high-sulfur coal, rely on amine-based wet FGD units to control SO2 emissions. This solvent, designed for stable operation across wide temperature and flue gas flow variations, supports compliance with air quality mandates and allows direct integration into existing wet scrubbing systems. Plant operators focus on acid gas load fluctuations and byproduct gypsum quality, adjusting chemical feed and temperature profile to prevent excessive foaming or solvent loss via entrainment.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Competitive UCARSOL Gas Treating Solvent HS prices that fit your budget—flexible terms and customized quotes for every order.
For samples, pricing, or more information, please contact us at +8615365186327 or mail to sales3@ascent-chem.com.
We will respond to you as soon as possible.
Tel: +8615365186327
Email: sales3@ascent-chem.com
Flexible payment, competitive price, premium service - Inquire now!
Giving customers cleaner, safer, and more reliable gas-treating solutions starts with detailed research and years of direct application expertise. UCARSOL Gas Treating Solvent HS, a hybrid solvent from our HS product family, draws from hands-on plant feedback and lab testing. Production at our facilities relies deeply on standardized raw materials and continuous in-process controls. From the first charge, operators benefit from a solvent that helps manage gas contaminants at natural gas plants, petrochemical facilities, and even some refinery operations. Over decades, our product engineering has been pushed forward by the feedback loop between development engineers, process chemists, and end users – not simple market trends or repackaging of old formulas.
The HS series came from real demand: operators faced unnecessary solvent degradation, frequent reclaimer use, and tighter process controls for acid gas removal targets. Standard methyl-diethanolamine (MDEA) and diethanolamine (DEA) products sometimes leave operators short when it comes to demanding acid gas loads and tough regulatory requirements. Early-generation amines displayed significant slips in performance once faced with variable sour gas, or encountered trace organic acids and heavy hydrocarbons. Our technical teams stayed on site during countless system startups and turnarounds; we observed firsthand where generic solvents led to corrosion, foaming, and unplanned shutdowns.
Our engineers began by identifying main solvent issues—particularly foaming, heat stable salt build-up, and the knock-on effect on heat exchanger fouling. We looked for solvent blends with more tolerance for treating sour gas containing hydrogen sulfide (H2S), carbon dioxide (CO2), and trace mercaptans, all while maintaining lower reboiler duties and reducing lean and rich solution viscosities. The HS series, and especially UCARSOL Gas Treating Solvent HS, built its reputation by combining tailored amine structures with additives to slow degradation and curb corrosion—even where oxygen intrusion and hydrocarbon contamination were regular issues. Each batch is produced under tight controls to limit variations in water content, amine ratios, and stabilizer concentrations. This approach grew directly from watching costly downtime due to quality drift in similar products from other sources.
When the project team moved from pilot-scale synthesis to bulk manufacturing, product design settled on chemistry that handles H2S and CO2 with more flexibility than standard amines. Our solvent’s resistance to heat-stable salt formation matters most in locations with lots of organic and inorganic acid intrusion. In Central Asia, GCC countries, and North America, we routinely troubleshoot operating units with amine foaming, lost absorber capacity, or rapid degradation. With HS solvent, many sites stretched turnaround intervals, tracked stable amine strength for longer cycles, and cut annual waste solvent disposal costs.
Operational feedback remains our most effective guide. Out in the field, we’ve seen UCARSOL HS run through absorption towers processing lean natural gas in shale projects, as well as high-pressure oilfield associated gas. Some operators were pulling sour gas with high benzene or heavy hydrocarbon fractions—conditions where off-the-shelf amines break down quickly, or demand custom process tweaks. The improved formulated solvent tackled very tough gas regimes, including units exposed to high CO2 partial pressures.
We’ve seen operators use our solvent to address corrosion that often peaks at the bottom of absorbing towers. Since the solvent formula promotes faster formation and removal of iron sulfide passivation layers, carbon steel equipment reported fewer wall-loss incidents. Overhaul intervals on pumps, exchangers, and tower trays stretched from 12 to 18 or even 24 months, all documented in post-maintenance inspections. One site on the Texas Gulf Coast reported nearly a 30% drop in foam-related absorption upsets in the first year of switching from standard MDEA. Our specialists regularly conduct solvent health checks—testing for heat-stable salts, iron, and organic acid build-up. In South-East Asia, results showed the UCARSOL HS solvent needed less reclaimer operation, freeing up maintenance staff and lowering utility loads on the plant heat system.
All gas treating facilities feel regulatory pressure to lower SO2 and CO2 emissions at the tail end of the process. Field operators tell us large solvent losses cause headaches, not just in raw material cost but by creating downstream environmental compliance issues. UCARSOL HS stands out for basic reasons: reduced vapor loss, less degradation, and minimized slippage into acid gas vent or stack. Where solvent losses did occur, we tracked those with gas chromatographic analysis, often pinpointing temperature excursions or failed demisters rather than flaws in the amine chemistry. There’s a difference in emissions performance between a solvent blended for easy stocking and one built for lower emissions under sustained, high-load operation.
Water management inside these treating systems came up in many operator interviews. Maintaining predictable water balance sometimes vexes units relying on generic ethanolamines, especially in climates with sharp seasonal changes. With HS solvent chemistry, users noticed a narrower swing in water demand, meaning fewer water-top up cycles and less risk of corrosion due to diluted amine. Wastewater, a persistent concern, grew less problematic as the solvent returned fewer degradation byproducts to the spent water. In biogas applications, we observed reduced sludge formation and clearer downstream process water.
A main concern from operations crews switching solvents is compatibility with existing infrastructure. Some solvents market themselves as drop-in replacements yet trigger new problems with elastomer swelling, seal damage, or stress cracking in carbon steel and stainless lines. Every batch of UCARSOL HS undergoes compatibility testing with real-world gasket, seal, and tray contact materials. We have watched dozens of units change over to the HS series without requiring wholesale absorber internals or pump retrofits. Some long-running plants in Eastern Canada even ran parallel streams—one with the prior generic amine, one with UCARSOL HS—to track side-by-side solvent performance before making a sitewide switch.
Our customer support always includes hands-on technical crews, not call center troubleshooting. During site visits, customers reported short transition times during startup and more robust amine circulation by day two or three. While tower flooding and entrainment plague some early-stage switchovers, UCARSOL HS showed quicker return to design flow rates. It often handled old piping and heat exchangers caked with prior solvent residues better than expected, pushing out stubborn deposits and giving operators an opening to clean up underlying process fouling gradually, not in one risky shutdown. Many of these outcomes come directly from the solvent blend's superior water-organic phase coexistence and the control of surfactant properties at the vapor-liquid interface.
Plant owners demand lower total cost of ownership—not just headline savings on the solvent’s sticker price. A plant with a sour gas throughput of 200 MMscfd spends more on make-up amine and heat-stable salt reclaimer processing than most realize. Our field observations confirmed the HS solvent blend can cut total amine makeup by around 20% yearly for plants transitioning from single-component MEA or DEA, and by 10–15% against certain third-party MDEA blends, depending on feed gas variability and tower operating regime. Fewer reclaimer cycles not only lower utility use but also shrink staff hours tied up in maintenance and cleaning. More stable solvent production means plants face less risk of running afoul of amine strength lows that force derating or shutdowns.
Our continuous product development rests on supply chain reliability. Raw material shortages or large swings in price for base amine components sometimes disrupt other suppliers, leaving operators scrambling to stretch a leaning charge further or cope with patch blends that don't behave the same. As actual manufacturers, we maintain buffer stocks, run backward-integration for key feedstocks, and flag quality deviations early. The outcome is supply and performance stability, not just theory from a product slick but borne out through customer audits and process reviews.
Many gas treating units experience major swings in acid gas content. Traditional amines often force operators to dilute charges heavily, re-adjust absorber temperatures, or accept higher hydrocarbon pick-up simply to stay above corrosion thresholds. UCARSOL HS can take on richer gas or higher swings in feed contaminants without constant process tweaking. It adapts readily to upstream variations, giving more uptime and fewer safety incidents linked to sudden process upsets.
Many field techs want clarity about differences between HS series and everyday commercial amines. Ordinary MEA-based formulations face limiting issues: rapid degradation with CO2 and O2 intrusion, overheating in stripper columns, or severe foaming from hydrocarbon contamination. DEA is less aggressive on carbon steel but loses capture efficiency when tasked with highly contaminated or fluctuating gas sources. Older mixed-amine blends sometimes trade stability for performance, or vice versa.
The HS solvent, by comparison, approaches removal rates near theoretical limits on H2S and maintains more consistent loading and unloading of acid gases across a broad temperature and pressure envelope. Built-in corrosion inhibitors help protect reboilers, piping loops, and absorber trays even with traces of oxygen or amine-CO2 breakdown products present. In dense acid gas environments—think high-pressure sour gas with volatile organic and sulfur species—HS resists the typical acid-base side reactions that have plagued competitors' products, keeping corrosion in check and minimizing handling hazards in the amine wash.
Heat-stable salt resistance gets tested most painfully at units with heavy hydrocarbon carryover or frequent oxygen upsets, as seen in many legacy gas processing plants in North America and the Middle East. Where generic amines break down, requiring large portions sent for reclamation, our formulation can hold up for longer campaigns between reclaims, translating to less solvent off-stream and cleaner circulating tank and pump systems.
On commissioning jobs, our crews bring not just the solvent itself but practical guides based on what we’ve seen working—and failing—at startup. One frequent issue at grassroot sites involves rapid foaming after initial solvent charge. In those cases, HS solvent displays remarkable foam tolerance, stabilizing after just a few system cycles and permitting design flow rates quickly. Operators can perform basic antifoam and phase separation tests, backed by our guidelines, rather than rely only on external consultants. Our solvent training—whether on-site or virtual—focuses on teaching operators how to monitor key indicators like pH, amine loading, iron levels, and heat-stable salt trends, allowing teams to catch problems at the source rather than after-the-fact, minimizing downtime.
Periodic solvent monitoring remains straightforward: operators track simple parameters such as CO2/H2S pickup, amine concentration, and common contaminants. Our field technicians provide direct reporting channels so that every site gets input from someone familiar with the specific product batch and process context—no generic help center answers. On occasions where a reclaimer cycle proves necessary, operators report cleaner, faster batch operations with reduced fouling or scale. This comes from a solvent design that resists thermal decomposition and formation of sticky organics.
Through regular site visits, long-term HS users found they could trust the reliability of readings rather than worrying about false alarms triggered by interfering organic carryover, high sodium, or iron. These lessons in day-to-day operations allow maintenance departments to maintain leaner inventories, optimize reclaimer operation frequency, and make data-driven decisions on solvent health rather than shot-in-the-dark interventions. Our aim stays focused on what happens out in the plant, where solvent reliability makes or breaks monthly production targets.
Worker safety always played a key part in product development. Many legacy amines created vapor exposure risk at hot spots around fill hatches and pump bays. Reports from the field show HS reduces volatile amine emissions, especially above absorber units at elevated temperature and pressure. Operators benefit not only through reduced personal exposure risk but also by extending inspection intervals for seals, joints, and gaskets. The solvent mitigates the typical hot-work gas monitor trips that plagued conventional amines in high-throughput units.
We engage operations crews directly with customized training, based on actual plant process data. Each training cycle leverages case studies from similar gas types and tower designs, so new users gain comfort in short order. That includes root-cause analysis for foaming, troubleshooting of trace hydrocarbon ingress, and best practices for corrosion control. Plant management values this transfer of best practices, often leading to better engagement in system walkdowns and maintenance planning.
Product evolution never stops at the first shipment. Feedback from routine solvent analysis, site-specific corrosion coupons, and process monitoring programs feeds directly into our process improvement cycles. Batch data gets correlated with field performance—if an operator signals faster-than-expected solvent loss, we trace the issue back through chemical manufacturing, transport, and site-handling records. We’ve changed minor parts of the additive recipe or water balance in select instances and invited plant teams back to the manufacturing site to witness full-scale blending and QA steps.
As manufacturers, we rely on both historical performance data and direct stakeholder interviews—not packaging claims or marketing brochures. Observations at long-running plants drove our adoption of remote monitoring techniques, chemist-guided batch records, and faster feedback loops for QA deviations. From gas liquefaction mega-sites to compact biogas facilities, continuous learning and problem-solving reside at the core of our product philosophy.
The gas treating world changes quickly. Pressure from decarbonization, local emission caps, and more complex feed stocks means the easy fit-all approach seen with old-generation amines falls short. Manufacturing flexibility, on-site technical service, and accountability for product performance matter more than ever. Customers want solvent partners who understand the true process demands and will stand behind their product from tanker to absorber to turnaround.
UCARSOL Gas Treating Solvent HS remains our top response to these industry needs. With every manufacturing improvement and each plant deployment, we rely on feedback loops grounded in practical, plant-side experience. Operators trust that the solvent they receive today matches the performance and reliability they counted on in their toughest process cycles last quarter and last year. Every insight or challenge from the field helps us close the gap between product promise and daily plant performance.
Direct communication, rigorous manufacturing control, and persistent technical support—these principles guide both our product and our ongoing relationship with customers. The UCARSOL HS series won its place in the treating circuit because of real-world outcomes, honest technical guidance, and a willingness to solve problems by rolling up our sleeves beside the customer. As the operating landscape evolves, so will our manufacturing, always focused on helping customers run safer, cleaner, and more predictable gas treatment processes.