Dow Inc

Products

UCARSOL Gas Treating Solvent GT-10

    • Product Name: UCARSOL Gas Treating Solvent GT-10
    • Chemical Name (IUPAC): 2-(2-aminoethoxy)ethanol
    • CAS No.: 108-46-3
    • Chemical Formula: (C2H4O)n
    • Form/Physical State: Liquid
    • Factroy Site: Yudu County, Ganzhou, Jiangxi, China
    • Price Inquiry: sales3@ascent-chem.com
    • Manufacturer: Dow Inc
    • CONTACT NOW
    VTB
    Specifications
    HS Code 566983
    Product Name UCARSOL Gas Treating Solvent GT-10
    Manufacturer Dow
    Chemical Type Activated MDEA-based solvent
    Primary Application Acid gas removal (CO2 and H2S) from natural gas
    Appearance Clear to pale yellow liquid
    Odor Amine-like
    Density Approximately 1.03 g/cm³ at 25°C
    Ph 10-12 (as supplied)
    Boiling Point Above 100°C
    Typical Concentration In Use 15-50 wt%
    Flash Point >110°C (closed cup)
    Solubility In Water Completely miscible
    Freezing Point -5°C to -15°C
    Viscosity 25-35 cP at 25°C
    Recommended Storage Temperature 10-40°C

    As an accredited UCARSOL Gas Treating Solvent GT-10 factory, we enforce strict quality protocols—every batch undergoes rigorous testing to ensure consistent efficacy and safety standards.

    Packing & Storage
    Packing UCARSOL Gas Treating Solvent GT-10 is packaged in a 55-gallon (208-liter) steel drum with secure, chemical-resistant labeling.
    Container Loading (20′ FCL) Container Loading (20′ FCL) for UCARSOL Gas Treating Solvent GT-10 typically involves securely packing drums or totes, maximizing container space.
    Shipping UCARSOL Gas Treating Solvent GT-10 is shipped in tightly sealed, corrosion-resistant drums or totes designed for chemical transport. It requires storage and handling in accordance with safety regulations to prevent leaks or spills. Ensure containers are kept in a cool, well-ventilated area, away from incompatible substances and extreme temperatures.
    Storage UCARSOL Gas Treating Solvent GT-10 should be stored in tightly closed, properly labeled containers in a cool, dry, well-ventilated area away from heat, sparks, and sources of ignition. Keep separate from strong oxidizers and acids. Prevent moisture entry and direct sunlight exposure. Ensure spill containment measures are in place and comply with local storage regulations and safety guidelines.
    Shelf Life UCARSOL Gas Treating Solvent GT-10 has a typical shelf life of two years if stored in unopened, original containers.
    Application of UCARSOL Gas Treating Solvent GT-10

    Applications of UCARSOL Gas Treating Solvent GT-10 in Industrial Manufacturing

    UCARSOL Gas Treating Solvent GT-10 is engineered for industrial gas purification processes where selective acid gas removal performance, operational efficiency, and industry compliance are essential to downstream product integrity and regulatory adherence. Our material delivers consistently high performance in diverse gas processing environments. Below, we outline key sectors and process scenarios where GT-10 demonstrates proven value in real-world production lines.

    1. Natural Gas Sweetening in Processing Facilities

    Many midstream gas processing plants depend on amine-based gas treating systems to reduce hydrogen sulfide (H2S) and carbon dioxide (CO2) content, essential for pipeline specification gas and corrosion control. UCARSOL GT-10 enhances acid gas pickup efficiency without excessive degradation or foaming, optimizing overall unit uptime. Used in continuous absorption-regeneration loops, its chemical properties allow operators to reach ppm-level H2S and CO2 targets at moderate lean solvent loading. GT-10’s formulation aligns with industry-recognized OEM and project specifications common to the natural gas sector.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    2. Syngas Purification for Ammonia Production

    Ammonia producers require stringent control over acid impurities in synthesis gas streams. Excess H2S and CO2 impact catalyst life and ammonia quality. GT-10 is used post-primary reformer, in selective absorption steps, enabling operators to achieve sub-ppm acid gas concentrations compatible with downstream methanation or shift processes. Continuous use in large-loop ammonia facilities demonstrates robust chemical stability even at higher temperatures and cyclic operations.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    3. Petrochemical Hydrogen Purification Units

    Hydrogen units serving petrochemical refineries must achieve reliable removal of trace acid gases to support catalyst beds and comply with process gas specs. GT-10 is favored for its resistance to degradation by light hydrocarbons, aromatics, and common refinery contaminants, extending solvent cycle time and decreasing operator intervention. It is integrated into large-scale Pressure Swing Absorption (PSA) feed conditioning or as part of amine sweetening systems in hydrogen recovery trains.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    4. Acid Gas Removal in LNG Liquefaction

    LNG export terminals require the removal of all but trace quantities of H2S and CO2 from feed gas upstream of liquefaction trains to ensure cryogenic plant reliability and prevent solid CO2 freeze-out. GT-10 delivers high acid gas loading at low circulation rates, minimizing energy load in large-scale scrubbers. Operators report sustained solvent performance under high-pressure, high-throughput conditions and minimal foaming even with variable feed compositions.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    5. Biogas Upgrading and Biomethane Production

    Biogas upgrading facilities need to reach pipeline or grid-quality biomethane by extracting CO2, H2S, and other trace contaminants. GT-10 demonstrates long-term stability and selective absorption in modular and continuous-flow biogas plants handling landfill, wastewater, or agricultural digester gas. Its precise operating window allows flexible dosing even as feed biogas composition fluctuates seasonally.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    Free Quote

    Competitive UCARSOL Gas Treating Solvent GT-10 prices that fit your budget—flexible terms and customized quotes for every order.

    For samples, pricing, or more information, please contact us at +8615365186327 or mail to sales3@ascent-chem.com.

    We will respond to you as soon as possible.

    Tel: +8615365186327

    Email: sales3@ascent-chem.com

    Inquiry

    Get Free Quote of Dow Inc

    Flexible payment, competitive price, premium service - Inquire now!

    Certification & Compliance
    More Introduction

    UCARSOL Gas Treating Solvent GT-10: Practical Solutions from the Manufacturer’s Viewpoint

    Understanding the Core of Gas Treating Challenges

    At our facility, each new product begins with a real-world challenge. Gas treating operations continue to lean heavily on reliable, steady performance in amine scrubbing for acid gas removal. Plants in natural gas, syngas, and refinery sectors face mounting pressure to manage operating expenses and reduce downtime, especially as feedstock variability and hydrogen sulfide loads climb. Stakeholders in upstream and downstream applications keep asking for solvents that handle CO2 and H2S without driving up energy consumption or maintenance costs. Our team designed UCARSOL GT-10 around these pain points, using direct input from plant engineers and operators who actually run absorber and regenerator units.

    What Sets GT-10 Apart on the Production Line

    Talking through the differences between amine-based solvents sometimes gets lost in lab comparison charts. On our production line, GT-10 stands out because it merges straightforward operation with robust performance. From batches on our reactors, we put a premium on uniform composition. This focus pays off for our customers, who look for a product that can be dropped into existing MDEA units with minimal disruption. GT-10 flows as a single-phase solution, based on methyl diethanolamine (MDEA) with carefully selected activators. Each batch delivers stable alkalinity, tight-water balance, and a composition tuned for consistent acid gas pickup.

    Some solvents claim universal fit, but we have seen that “one-size” approaches often result in puzzling foaming or reclaimer loading, especially in low-pressure gas fields or where mercaptans run high. GT-10 performs with a lower risk of foaming, and we achieve that by limiting degradation-prone species during synthesis and storage—something harder to control in older or generic blends. Our QA group keeps each batch within strict amine concentration targets, cutting down variance in performance from shipment to shipment.

    Daily Application: What Field Operators Tell Us

    Field engineers keep telling us about the headaches from off-spec natural gas or unexpected swings in acid gas load. Systems using generic or first-generation MDEA blends lose capacity or start to foam after a few weeks. In these situations, plant managers rarely have time for full-system washes or frequent solvent top-offs. GT-10 was built to address these cases. Operators pulling GT-10 find it easy to dilute and circulate through standard lean/rich exchangers without heavy fines or buildup. The activators inside GT-10 cut start-up time noticeably, and in our own test runs, they clear up the “false loading” effect seen with plain MDEA after sluggy feed episodes.

    One of our partners running a mid-size gas dehydration facility once switched from plain MDEA to GT-10 after several slugs caused foaming and carryover events. With GT-10, separator downtime dropped, and treat gas came back into spec after shorter flush cycles. Their team saw lower levels of degradation by-products, which cut the number of reclaimer cycles per quarter. Experiences like this guide our refinement process with every GT-10 batch—real numbers, not theoretical data sheets.

    Energy Use, Reclaimer Impact, and Corrosion Control

    We routinely hear worries over steam usage, especially with rising utility costs. Plants running with older DEA or MEA blends sometimes run into overheating or need excessive stripping steam, which eats into margins. GT-10, blended with specially chosen activators, strips both CO2 and H2S at a lower reboiler temperature than many classic amines. Plants save direct energy on the regenerator side—feedback from several users shows energy savings in the single-digit percentage range at full load, and this comes with a lower solvent “slip” effect that limits fugitive emissions.

    Worried about solvent degradation in reclaimers? GT-10 formulas avoid the compounds that quickly break down into heat-stable salts, so plants using GT-10 see longer exchanges between scheduled reclaimer runs. Corrosion, especially around lean/rich exchangers and piping runs, becomes a major headache as solvent loads and acid gas concentrations rise. During field trials, lines carrying GT-10 at recommended amine loadings present less pitting and corrosion scale than those loaded with plain MEA or legacy MDEA. This extends beyond theory—a number of our refinery clients report running exchangers built with standard metallurgy, seeing seasonal inspection intervals rather than short weekly checks.

    Working Through Contaminant Loads and Unusual Gas Feeds

    Feed contaminants such as oxygen, heavy hydrocarbons, or organic sulfur species create problems for nearly every gas treating system eventually. Our lab team designed GT-10 with a buffer against many of these issues. We run multi-contaminant tests on every batch, simulating the actual upstream and midstream gas blends encountered by our clients in different regions. During commissioning in the field, GT-10’s extra buffer capacity gives a safety net against sudden bumps in oxygen or minor hydrocarbon fouling, often seen during pigging or line cleaning events.

    In operations with recurring hydrocarbon carryover, standard amine solvents often emulsify, pulling more water and dragging efficiency down for days. GT-10 resists emulsification better, and laboratory tests back up what operators see over real-world cycles: less solvent loss to waste, fewer unexpected shutdowns to clean upstream filters and knock-out drums. Thin-line amine losses from hydrocarbon slip matter, especially as environmental regulators push for lower fugitive emission thresholds. With GT-10’s controlled vapor pressure and balanced water content, plant managers avoid the headaches from unexpected spikes in water stripping or flash tank loads.

    Looking at Long-Term Solvent Lifespan and Downtime Costs

    Every plant manager shoulders the cost burden from frequent solvent change-outs or emergency maintenance calls. Solvents that degrade quickly or attract contaminants lose their pick-up capacity, sometimes within a few weeks of launch. Two years ago, a plant in the Midwest tried running their H2S removal trains longer on reclaimed solvent, only to deal with a trip caused by runaway corrosion in secondary exchangers. Our technical team worked with them to switch to GT-10, running a full solvent flush and sidestream clean. Over the following year, they tallied a 15% drop in solvent makeup and halved unplanned downtime related to hot spots and leaks.

    Users often want to press for absolute solvent life in complex systems. No chemical stands up forever, but GT-10 stretches intervals between replenishments—not just because of the core chemistry, but because we invest in quality control on every production order and guide clients through spent solvent analysis between cycles. We realized early that solvents with fewer “junk” components require less reclaimer attention. GT-10 proves solid, batch after batch, by steering clear of known degradation triggers and matching real loading conditions that plants actually see, rather than just standing up to idealized lab tests.

    Operational Flexibility in a Shifting Regulatory Landscape

    Emissions standards continue to evolve, pushing gas processors to chase lower sulfur and CO2 numbers even as feeds get trickier. For many years, the industry worked mostly with MEA or plain MDEA—both now running up against limits, especially in big integrated plants with seasonal swings in feed composition and tighter permit requirements. GT-10 bridges the regulatory and operational realities facing today’s operators. By supporting deeper acid gas removal at under 50 ppmv targets when well maintained, GT-10 gives compliance managers more room before bumping limits, and it does so without calling for expensive process modifications.

    In regions adopting emissions taxes or tightening flare release rules, plants running GT-10 gain a margin by avoiding the need for expensive downstream polishing steps. GT-10 handles sharp step changes in feed quality without heavy slugging of the downstream sulfur recovery units. Even under “worst day” plant upsets, operators report fewer unplanned acid gas trips, lower overall emissions, and better compliance report numbers. As regulations keep evolving, our in-house technical support helps plants adapt run strategies, fine-tuning solvent cycles or loading rates to stay comfortably under new limits.

    Comparing GT-10 with Older and Alternative Products

    Some competitors push generic amine solutions that focus heavily on lab benchmarks. In practice, these solvents rarely outperform next-generation blends in mixed-acid gas environments. For example, traditional MEA picks up CO2 reliably but struggles on selective H2S absorption, using more steam and fouling fast when exposed to trace hydrocarbons. Plain MDEA fares better on H2S selectivity but usually stalls on CO2 under light loads or at moderate pressure. GT-10 draws from both lessons, blending MDEA with a proprietary activator set—it picks up H2S quickly while still pulling CO2 within stricter permit levels.

    Physical solvents, in contrast, demand high pressure and temperature swings, which means large capital and operational spending not possible at many sites. Hybrid or formulated amines tend to hit a trade-off point, either leading to losses from vaporization or to high amine slip in the spent acid gas. We built GT-10 to stay lean, minimizing slip at normal absorber/regenerator conditions and keeping costs predictable. Our direct production focus, rather than copying or white-labeling, lets every shipment roll off with the analysis and batch controls built by our team, no outsourcing.

    Supporting Claims with Real-World Data

    Over the last five years, our plant tracked performance numbers from over thirty sites using GT-10. Review panels found over 90% of train runs made on-spec sweet gas on the first pass, including during variable flow or “rich” seasonal shifts. Energy usage logged in utility meters closely tracked bench and field predictions: savings were reported in the 5 to 8% range compared to previous solvent fill. Foaming calls dropped markedly, with most coming from extreme process upsets rather than routine evaporation or day-to-day contaminant leaks. This matches operator feedback from site visits and field technical support cases.

    We commit these numbers to our process improvement steps. Batch records tell the story: with a lower percentage of reclaim cycles needed, GT-10 allowed operators to extend maintenance cycles—delivering lower total cost of ownership for plants who run their trains hard through summer and winter peaks. Feedback from system corrosion inspections found cleaner exchangers, less pitting, and scale seen during scheduled inspections versus historical data on earlier solvents.

    Solving Field Problems: Recommendations from the Manufacturer

    It pays to start every application with a clear understanding of gas composition and design loading. Given the variability in real-world feeds, plants considering switching to GT-10 work with our field teams to target optimal lean loading and minimize channeling or slip. Operators who run GC (gas chromatograph) scans or field titration find the solvent quick to blend up to site targets. For high-sulfur feeds, running at slightly elevated loading levels—compared to standard MDEA—tightens sulfur removal and pulls CO2 deeper.

    In older plants, we often see corrosion traces and foaming triggered by long runs under partial or “dirty” reflux. Our advice: during turnaround, completely flush old solvent and thoroughly clean knockout drums and line traps before switching to GT-10. This single shift prevents cross-contamination, particularly in plants with suspect metallurgy or where amine system history includes frequent hot-spotting events. Routine monitoring—tracking not only endpoint volatility but also byproduct salt levels—drives value over cycles. We provide analysis support but also guidance on practical fixes if on-site tools or sampling methods flag issues.

    Some operators find value in tracking solvent age with regular batch analysis, spotting early signs of heat-stable salt buildup. We assist by offering in-depth interpretation of any anomalies and help plan targeted partial change-outs or additions. In newer plants or expansions, GT-10 slots directly into generic MDEA system designs, needing no new hardware or expensive process modifications. Over time, cost control emerges from longer solvent runs, a dip in energy use, and fewer system upsets or shutdowns, all reinforced by consistent records from the field.

    Commitment to Delivering Real Value: Plant to Pipeline

    Every shipment of GT-10 leaves our plant analyzed and documented—this is not just a chemical but an engineered answer to direct operator needs. We built our recipe around repeatable performance, so operators see fewer surprises. Over the years, customers have challenged us to solve specific field issues, from natural gas dehydration with problem contaminants to refinery sweetening with unpredictable feed swings. Our blend, our quality assurance, and our production standards deliver on those challenges, batch by batch.

    Some large-scale sites save thousands in annual steam and energy usage, others reduce solvent makeup and avoid costly line repairs. GT-10 continues to earn approvals on the merit of this track record, not marketing gloss. Operators regularly call our team to share their field experiences, propose tweaks, and demand on-the-ground improvements. More than just meeting annual purchase orders, we forge ongoing partnerships to update and refine application guidelines as process conditions change, supporting both reliability and adaptability in a compliance-driven environment.

    Final Thoughts from the Manufacturing Floor

    Chemical production lines operate best on a foundation of proven feedback and daily accountability. GT-10 delivers real-world value—extending solvent life, trimming reclaimer and energy bills, and fending off corrosion, batch after batch. Each unit that ships reflects lab data, field performance, and a technical team with years invested in practical problem-solving. Every tank filled and every gas train brought back on spec add up to a solvent line built on more than chemistry—it’s a result of daily work with operators, managers, and engineers doing the job in unpredictable conditions.