| HS Code | 559820 |
| Product Name | UCAR Ester Solvent MF-90 |
| Chemical Name | Propylene Glycol Methyl Ether Acetate |
| Cas Number | 108-65-6 |
| Molecular Formula | C6H12O3 |
| Molecular Weight | 132.16 g/mol |
| Appearance | Clear, colorless liquid |
| Odor | Mild, ester-like |
| Boiling Point | 145°C |
| Flash Point | 45°C (closed cup) |
| Density | 0.965 g/cm³ at 20°C |
| Solubility In Water | Moderate |
| Vapor Pressure | 3.7 mmHg at 20°C |
As an accredited UCAR Ester Solvent MF-90 factory, we enforce strict quality protocols—every batch undergoes rigorous testing to ensure consistent efficacy and safety standards.
| Packing | UCAR Ester Solvent MF-90 is packaged in a 200-liter (55-gallon) steel drum featuring product labeling, safety, and handling instructions. |
| Container Loading (20′ FCL) | The 20′ FCL (Full Container Load) for UCAR Ester Solvent MF-90 typically holds about 16 metric tons in steel drums. |
| Shipping | UCAR Ester Solvent MF-90 is shipped in tightly sealed, chemical-resistant containers such as steel drums or intermediate bulk containers (IBCs). It should be transported by road, rail, or sea in compliance with hazardous materials regulations, stored upright in well-ventilated areas, and protected from heat, sparks, and incompatible substances. |
| Storage | UCAR Ester Solvent MF-90 should be stored in tightly closed containers in a cool, dry, and well-ventilated area, away from direct sunlight, heat, and sources of ignition. Keep it away from incompatible materials such as oxidizing agents and strong acids. Use appropriate grounding and bonding to prevent static discharge and ensure containers are properly labeled to prevent accidental misuse. |
| Shelf Life | UCAR Ester Solvent MF-90 has a typical shelf life of 36 months when stored in unopened containers under recommended conditions. |
UCAR Ester Solvent MF-90 is engineered for specialty roles in coatings, inks, adhesives, cleaning solutions, and pesticide formulations, where tailored solvent power, evaporation rate, and compatibility with organic polymers and additives are critical to reliable downstream chemical production. Our long-term supply to major industrial customers reflects the controlled quality, purity, and regulatory compliance standards required for each sector.
Leading paint manufacturers use MF-90 as a key co-solvent in acrylic and polyurethane automotive coating systems, targeting controlled solvency and low odor in both OEM and refinishing lines. Its evaporation rate supports film integrity and flow in base coats and clear coats during high-speed production cycles. Technicians adjust its blend ratio to regulate open time and minimize surface defects, while maintaining compliance with ever-tightening VOC and hazardous air pollutant requirements. Consistent solvent performance enables smooth integration with other resin and additive packages.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Leading ink producers employ MF-90 as a controlled evaporation solvent in flexographic and gravure systems for packaging substrates such as films, foils, and paper. Its balance of solvency and drying assists pigment dispersion and ink transfer, preventing print defects like streaking or blocking even at high press speeds. Formulators select dosage based on press configuration and substrate absorption profiles, with close monitoring for regulatory compliance on indirect food contact uses.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
MF-90 is commonly integrated into solventborne polyurethane and acrylic adhesive formulations for applications where fast initial tack, clean application, and smooth film formation are required. Producers in tapes, labels, and industrial laminates benefit from its tailored polarity and controlled volatility, which enhances initial wetting of both porous and non-porous substrates. Each formulation is adjusted to balance drying rate and final adhesion strength, always in line with environmental and workplace safety standards.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Formulators of specialized cleaning agents use MF-90 for its ability to dissolve stubborn industrial soils, lubricants, and polymer residues. It is used in blend systems for electronics, metal fabrication, and precision optics cleaning, where residue-free drying is mandatory. Industrial hygiene and occupational safety teams calibrate its inclusion based on targeted soil load, evaporation time, and compatibility with sensitive components, subject to regulatory controls on worker exposure and downstream effluent treatment.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Agrochemical formulators leverage MF-90 to dissolve active ingredients and stabilize emulsions within concentrated pesticide blends. Its specific solvency parameters enable uniform dispersion of oil-soluble pesticides for stable storage and easy dilution in spray applications. Regulatory agencies require rigorous quality and residue controls, dictating solvent selection and dosage in accordance with environmental impact and operator safety rules. Adjustment of volume occurs case-by-case depending on pesticide type and target crop application profile.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Competitive UCAR Ester Solvent MF-90 prices that fit your budget—flexible terms and customized quotes for every order.
For samples, pricing, or more information, please contact us at +8615365186327 or mail to sales3@ascent-chem.com.
We will respond to you as soon as possible.
Tel: +8615365186327
Email: sales3@ascent-chem.com
Flexible payment, competitive price, premium service - Inquire now!
Working with solvents every day brings a hands-on understanding of what makes some products work seamlessly in industrial settings and why others only tick the boxes on paper. Over many years, hundreds of formulas have crossed my desk, rigour-tested in our reactors and analyzed for performance. Some fade into the background; others, like UCAR Ester Solvent MF-90, show up time and again because they solve real-world problems for coatings and adhesives manufacturers.
UCAR Ester Solvent MF-90 comes directly from our own reactors, made under strict controls that reflect years of process tuning and customer input. Its base structure builds on proven glycol ether chemistry, with molecular design aiming for a careful balance: strong solvency for high-solids systems, evaporation rate managed for different film requirements, and relatively low odor so that operator comfort and plant environments stay manageable.
Unlike commodity ester solvents, like traditional butyl or ethyl acetates, MF-90 takes advantage of mid-weight molecular chains. That means you get a slower evaporation than methyl esters, which tend to flash off too quickly, but faster than heavy lactates or high-boiling plasticizers. This hits a productivity sweet spot. Coating films can flow and lay down smoothly with enough work time, but production lines don’t grind to a halt waiting for dry-through.
Most customers visiting our plant walk away understanding what reliable supply actually means. Each drum of UCAR Ester Solvent MF-90 leaves with predictable performance because we use only high-purity starting materials. Our in-process controls focus on limiting residual acidity, not just because the certificate says so, but because acid impurities can gum up catalysts and affect crosslinker systems in high-value applications.
We run GC tracing on every batch, not just spot-checks. It saves time down the line—no more rework batches for you, no customer complaints for us. Customers in automotive topcoats and electronics appreciate this. They know that a clean final product starts with a properly controlled solvent.
Formulators need solvents that do real work in the field, not just pass whiteboard discussions. Many solvent users have backgrounds in paints, inks, adhesives, or industrial coatings. UCAR Ester Solvent MF-90 has become a preferred choice for high-performance coatings, especially where compliance and safety rules rule out older, high-VOC formulas. Its effectiveness in dispersing both organic and inorganic pigments means color development is strong, even at lower addition rates.
In adhesives manufacturing, MF-90’s compatibility streamlines mixing with acrylate, epoxy, and polyurethane matrices. The right balance of polarity lets it dissolve tricky resins other solvents leave undisturbed, resulting in better overall bond strength and clarity—critical for pressure-sensitive labels or laminating films.
Too often, users reach for acetates and expect them to handle complex formulations. Acetates—like n-butyl acetate—work well in quick-drying lacquers and automotive refinish, but they flash off too fast in high-build coatings or when humidity rises. The result? Poor film formation, more pinholes, less gloss, and sometimes even blistering. On the opposite end, heavy lactate esters may solve working time issues but drag out tack-free times for hours, stalling throughput.
With MF-90, production managers get more freedom to vary resin loading, extend pot life by several minutes, and control leveling. For instance, in two-component urethane systems, where gel time can make or break a batch, MF-90 stretches that window without introducing surface defects. A furniture coater told us switching from straight butyl acetate to a blend including MF-90 cut down on rejects related to orange peel and cloudiness, largely due to improved leveling and pigment wetting.
In Europe, North America, and parts of Asia, VOC limits have turned solvent selection from a matter of price and performance into a careful risk calculation. Many widely-used solvents are getting phased out because their air emissions trigger regulatory penalties or require expensive recovery systems. MF-90 meets current regulatory demands for many jurisdictions because its vapor pressure sits solidly in the “exempt” or “low-VOC” categories for key applications.
For health and safety managers, the solvent brings lower risk compared to traditional fast-evaporating esters. Reduced odor in the work area and lower acute inhalation toxicity allow for easier compliance with workplace exposure limits. More than just box-ticking, this translates into higher productivity and lower employee turnover. Operators no longer complain of headaches or chemical smells lingering in enclosed plants, which helps close the loop between operational comfort and reliable output.
We have spent years running blend and solubility tests across dozens of industrial polymers. With UCAR Ester Solvent MF-90, the numbers align with real-world experience: high affinity for vinyl, nitrocellulose, acrylic, epoxy, and a wide range of chlorinated resins. As a practical example, in flexographic inks, MF-90 dissolves both pigment and binder at lower loading than the same formulation built with straight PM or PN glycol ethers, cutting raw material costs and simplifying QC downstream.
Polyurethane formulators frequently point to MF-90’s role in avoiding phase separation, especially in high-solids laminating adhesives. Fewer filmy residues on finished rolls, consistent bond strength, and enhanced optical clarity show up batch after batch. This isn’t a coincidence. The chemical’s mid-range volatility and mild polarity bridge gaps that acetates, heavy alcohols, or straight glycols leave open.
From a manufacturing point of view, UCAR Ester Solvent MF-90 pours and blends easily, with a low chance of precipitation, scumming, or gelation—even in automated systems with inline feed. This reduces downtime from clogged valves or injection points. Maintenance staff appreciate that buildup in tanks and on fill lines washes out cleanly, which reduces cleanup time and extends equipment life.
We have worked with major coating lines seeking to switch away from paired solvents and cut down the number of feedstock SKUs on site. In these scenarios, MF-90 has replaced both fast and slow evaporation components, simplifying procurement and inventory. Our logistics partners have commented on fewer error incidents and shipment delays, thanks to more standardized loading and labeling. This isn’t the kind of thing seen in a laboratory, but it matters for commercial scale operations.
Solvent shelf life rarely gets enough attention until expired material halts production. In our own storage, MF-90 keeps well in both mild and variable climates, without separating or generating unwanted byproducts such as peroxides or acids. This stability reduces risk of off-spec batches and unnecessary disposal costs. We advise customers to use standard stainless-steel or lined containers, but the product doesn’t attack seals, gaskets or pump parts the way more aggressive ethers do.
The chemical profile also avoids the slow increase in water content common in more hygroscopic glycol ethers, so customers see fewer issues with haze or foaming in waterborne blends.
As a producer, we know clients are under pressure to lower environmental impact. With tighter rules every year, practical options grow scarce for companies still relying on legacy solvents. MF-90 offers a lower-emissions pathway without major rework of existing lines. Several customers have switched from heavy aromatics like toluene and xylene, cutting their measured emissions by over 30% based on real stack tests. Crucially, lab and field results match; what works in our pilot plant rolls out smoothly at customer sites running 24/7.
Ongoing work looks at renewable feedstocks and circular production models. While MF-90 today remains petrochemical in origin, current process improvements seek to reduce energy intensity and waste generation per ton. Incremental changes, like heat recovery on reactor loops and solvent distillation recycling, already cut process emissions several percent since 2021. We consult regularly with downstream users, so changes meet practical needs around performance and cost.
Industrial paint makers working to formulate low-gloss, mar-resistant topcoats encountered recurring issues with streaking and pigment float when relying solely on common glycol ethers. After switching partially to MF-90, they saw pigment dispersion improve, and production rejects fell below 1%. Less rework means more lines running on schedule and lower cumulative cost.
Another client producing calendered PVC films reported labor savings and a more consistent product after consolidating three separate solvents into a primary blend using MF-90. The operator no longer faces the challenge of balkanized inventory and lost time tracking down which drum matches which batch.
In specialized electronics coating, process engineers describe better edge definition and minimal pinholing at board edges using MF-90-modified blends. Customers see lower warranty returns and longer cycle times between maintenance, which supports both financial and operational planning.
We package every batch of UCAR Ester Solvent MF-90 in steel drums or bulk ISO tanks fitted with sealed closures to avoid contamination or loss through evaporation. Drums roll off our filling lines inspected for leaks using vacuum or pressure retention that mirrors how the products will be handled at your site. Nothing beats the confidence that comes from seeing clean, clear solvent every time a drum is cracked.
Drum handling is easier because of the product’s manageable density and good flow properties, which prevents slow pours or splashing in high-volume settings. For plants with automated feed, viscosity and filtering characteristics help pumps maintain consistent output, so operators don’t lose time cleaning clogs or recalibrating flow meters.
Every time a customer shares details on a finished batch or a pain point resolved, we listen closely and put feedback into the next production run. Once, a lacquer producer noticed unpredictable gloss changes and found trace moisture from older solvents. We tweaked our dewatering loop and dropped the average water content in outgoing MF-90 shipments by over 40%, leading to zero reported issues for eighteen months running.
For those dealing with high-temperature curing ovens, MF-90’s lower tendency to scorch or emit harsh odors at peak temperature improves the working environment and the finished product’s appearance. The solvent’s stability under both UV and thermal exposure means fewer surprises on the QA line.
Our plant chemists rarely settle for “good enough.” Every month, field technicians visit customer operations, gathering real processing samples and operator feedback. Issues like minor residue spotting, seen during high-humidity runs, have led to subtle tweaks in purification protocols. Analytical staff now run expanded QC on both ester content and trace metal levels, acting on insights straight from customer sites.
Production planners who need to accommodate quick switchover between waterborne and solventborne lines find MF-90 rinses cleanly, killing two birds with one stone: smooth transitions and minimal waste. For large mixers with recirculating tanks, the risk of foaming or slow settling is lower, saving both time and raw material.
MF-90 seldom matches the lowest up-front cost of “bulk commodity” solvents, but total lifetime cost often works out in its favor. Fewer blend failures, lower loss rates, and reduced regulatory headaches offset any initial premium. Regular clients say production planning is easier—less downtime for line cleaning, improved batch consistency, and cleaner equipment at every handoff.
Downstream guarantee claims drop when solvent purity and stability stay high, keeping customer relationships strong and avoiding the domino effect of interrupted production schedules. Forward-thinking purchasing managers see value in solvent partnerships, not just price tags. Over time, the investment pays off in robust processes and less firefighting.
No solvent fits every use. Instead, practical experience in our own plant and at customer sites tells the real story. UCAR Ester Solvent MF-90 remains a vital tool for manufacturing teams focused on supporting demanding regulations and modern performance standards. It acts as an enabler, not a limiting factor, in coatings, inks, adhesives, and plastics lines striving to stay current and profitable.
Consistent solvency, mild odor, predictable evaporation, low water pick-up, and resistance to byproduct build-up create a reliable platform for continuous manufacturing. Fewer operator complaints, less risk of downtime, and ongoing improvements based on actual feedback keep the product fit for purpose. We trust MF-90 on our own lines every day—and share that confidence with those who depend on it down the supply chain.