| HS Code | 422077 |
| Product Name | SYNALOX PAG Lubricant UCON OSP-680 |
| Chemical Family | Polyalkylene Glycol (PAG) |
| Appearance | Clear to slightly hazy liquid |
| Color | Colorless to pale yellow |
| Viscosity At 40c | 650-710 cSt |
| Density At 20c | 1.05 g/cm3 |
| Pour Point | -43°C |
| Flash Point | 270°C (closed cup) |
| Water Solubility | Fully miscible |
| Acid Number | <0.05 mg KOH/g |
| Typical Usage | Compressor and refrigeration lubricants |
| Biodegradability | Readily biodegradable |
| Thermal Stability | Excellent |
| Compatibility | Incompatible with mineral oils and hydrocarbons |
As an accredited SYNALOX PAG Lubricant UCON OSP-680 factory, we enforce strict quality protocols—every batch undergoes rigorous testing to ensure consistent efficacy and safety standards.
| Packing | SYNALOX PAG Lubricant UCON OSP-680 is packaged in a blue 200-liter steel drum with secure lid and labeling. |
| Container Loading (20′ FCL) | **Container Loading (20′ FCL):** Each 20′ FCL holds approximately 18 metric tons of SYNALOX PAG Lubricant UCON OSP-680 packed in steel drums. |
| Shipping | SYNALOX PAG Lubricant UCON OSP-680 ships in tightly sealed, corrosion-resistant drums or pails to prevent contamination and moisture ingress. Containers should be handled with care, stored upright in a cool, dry place, and protected from direct sunlight. Shipping complies with standard non-hazardous material regulations; ensure all labeling meets transportation guidelines. |
| Storage | SYNALOX PAG Lubricant UCON OSP-680 should be stored in tightly closed, original containers, away from moisture and direct sunlight. Store in a cool, dry, well-ventilated area, away from incompatible substances such as strong acids and oxidizing agents. Avoid extreme temperatures to prevent product degradation. Ensure proper labeling and keep containers upright to prevent leaks or spills. |
| Shelf Life | The shelf life of SYNALOX PAG Lubricant UCON OSP-680 is typically 2 years when stored in unopened, original containers. |
As a manufacturer with deep expertise in polyalkylene glycol technology, we supply SYNALOX PAG Lubricant UCON OSP-680 to pioneering industries where demanding operational standards, specific formulation ratios, and precise integration with existing processes are fundamental. Below, we detail major industrial applications, with a focus on differentiated downstream scenarios prominently utilizing this performance raw material.
Industrial air compressor and vacuum pump manufacturers utilize this raw material for its high thermal stability, low carbon residue, and controlled volatility under severe mechanical stress. Our technical partners blend it to form low-ash, extended-life lubricants supporting continuous operation cycles, rigorous cleanliness criteria, and moisture tolerance found in rotary screw, rotary vane, and reciprocating machinery. Field testing confirms the capacity to extend change-out intervals and maintain system reliability in demanding service environments.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Equipment builders in pulp & paper, metallurgy, and processing plants rely on PAG-based formulations for gearboxes subjected to shock loading and temperature swings. Downstream clients report superior micropitting resistance and cleanliness in high-torque gear applications, aiding minimized downtime. Our material solves documented problems in worm and helical gear drives, especially in systems calling for high viscosity index under varying shear rates.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
SYNALOX PAG Lubricant offers inherent fire resistance and hydrolytic stability favored in fire-prone or water-adjacent hydraulic systems, especially for aluminum die casting, steel rolling lines, and foundry kiln actuation systems. Direct end users report reduced sludging and consistent viscosity over long cycles despite contamination with water or particulates.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Automotive, canning, and textiles factories integrate PAG-based lubricants into conveyor and oven chain lubrication systems for enduring high temperature without residue accumulation or varnish formation. These properties satisfy the requirements for electric motor chain drives, paint curing oven chains, and other continuous-duty applications demanding reduced evaporation loss and long relubrication intervals.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Manufacturers producing precision metal parts utilize SYNALOX PAG Lubricant in aqueous and neat quenchants to achieve uniform cooling rates, reduced internal stress, and enhanced part surface finish, especially for aluminum alloys, tool steels, and bearing components. The water solubility and controlled polymer structure enable reliable phase transformation with low smoke or fume emissions, improving environmental compliance in plant zones.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Paper manufacturers install closed-loop lubrication systems relying on PAG-based fluids in critical applications, such as dryer bearings and press sections, to minimize sludge formation, extend bearing service life, and resist hydrolytic breakdown under high humidity and steam conditions. Lab analysis routinely reports lower total acid number (TAN) drift and stable demulsibility across extended operation periods.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Competitive SYNALOX PAG Lubricant UCON OSP-680 prices that fit your budget—flexible terms and customized quotes for every order.
For samples, pricing, or more information, please contact us at +8615365186327 or mail to sales3@ascent-chem.com.
We will respond to you as soon as possible.
Tel: +8615365186327
Email: sales3@ascent-chem.com
Flexible payment, competitive price, premium service - Inquire now!
Working day in and day out at our chemical plant, we stand behind products only after countless batches, feedback from field engineers, and conversations with maintenance crews who run the same machinery we build these lubricants for. SYNALOX PAG Lubricant UCON OSP-680 represents the output of continuous tinkering and plenty of lessons learned over the years, combining practical experience with improved formulations that hold up in the most demanding environments.
OSP-680 falls under the broad family of polyalkylene glycol (PAG) lubricants, which have gradually carved out their niche in challenging conditions where mineral oils fall short. This product is the result of a focused approach to overcoming long-standing problems like varnish, sludge buildup, and thermal degradation in industrial gearboxes, air compressors, and circulation systems. Rather than following trends, we listened to operators who see first-hand how lubricants break down under heavy loads and elevated temperatures.
This PAG-based lubricant doesn’t come from a theoretical desire to replace mineral oils. Instead, we drew from plant trial data and field observations across sectors—plastic processing, textile spinning, vacuum pumps, and centrifugal compressors—to arrive at this composition. UCON OSP-680 delivers stability where hydrocarbon bases begin to deteriorate, a feature that pays off for maintenance budgets and equipment uptime.
We discovered early in field tests that UCON OSP-680 held its viscosity much longer in high-temperature applications than conventional oils. For example, gearboxes that cycle between heavy start-up loads and steady operation benefit from a lubricant that resists thinning and doesn’t oxidize quickly. You could go months without seeing sludge in sight glasses or having to stop for filters and lines clogged with lacquer-like deposits. That’s a direct result of the chemistry behind OSP-680, not a general claim.
Technicians handling frequent gear and compressor changeouts often report OSP-680 washes out old mineral oil deposits and leaves internals clean. We’ve even seen crews extend oil drain intervals from months to over a year in consistent situations, and the used oil comes out much cleaner—bright and low in acid number—compared to what had been the norm in the plant before switching.
Standardized lab tests provide useful data, but we count most on how OSP-680 performs in real conditions. In industrial chillers, customers faced with severe carbon buildup found their problems easing as they switched to this PAG formula. Equipment that ran noisy and hot under legacy lubricants started operating quieter, with temperature gauges holding steady closer to optimal ratings. We back claims by sending our own engineers to sites, pulling oil samples, double-checking viscosity, total acid number, and looking for foaming or gumming up in sight glasses.
Field results across industries show that UCON OSP-680 stands up to contamination better than standard mineral-based fluids. Even after months of operation with intermittent condensation and fluctuating loads, equipment stayed cleaner, and internal inspections showed minimal deposits. This is especially crucial for facilities running non-stop, where planned maintenance windows get fewer and farther between.
In our own test bay, we subjected UCON OSP-680 to repeated thermal cycling and exposure to steel, copper, aluminum, and elastomer materials used in pump and gearbox parts. We documented minimal change in material compatibility, echoing customer reports that seals last longer and maintain their shape. No product performs perfectly everywhere, but we see reduced incidences of swelling or shrinkage compared with aggressive fluids.
From every batch we process, we verify kinematic viscosity, water content, and acid value against tight internal standards. UCON OSP-680 holds tight viscosity at both ambient and elevated temperatures, consistently measuring in the mid-range suitable for industrial gear oil applications. Flash point stands among the highest in its class. This means users can run equipment hotter without worrying about oil breakdown or sudden volatility, a key consideration where safety is paramount.
Our technicians report nearly total miscibility of UCON OSP-680 with similar PAG-based lubricants, though it keeps its advantages by resisting mix-down with mineral oils. This makes transition planning critical—factory shifts to OSP-680 involve careful draining and flushing, a practice we have supported with on-site supervision and specific cleaning procedures.
Mineral oils still dominate many lubrication routines, but as equipment intensifies and cycles get longer, plant managers recognize the long-term benefits of synthetics like UCON OSP-680. PAGs beat mineral oils at resisting oxidation, controlling deposit formation, and enduring heat. In compressor rooms, highly loaded gearboxes, conveyor drives, and textile winders, this translates to longer lifespans for both lubricant and machines themselves.
OS-680 stands out in applications where water contamination is persistent. Most mineral oils lose lubricity rapidly when exposed to water, often resulting in bearing or gear failures needing major overhauls. By contrast, UCON OSP-680 forms a distinct, easily separable layer, simplifying drainage and reducing the risk of micro-pitting or corrosion on metal surfaces. This single property has protected countless pieces of capital equipment by reducing expensive repairs.
In automation and food-grade manufacturing, operators have moved away from hydrocarbon-based fluids for health, safety, and regulatory reasons. UCON OSP-680, like other high-grade PAG lubricants, offers a solution with high purity and traceability, aiding compliance without forcing operators to run costly post-lubrication cleaning cycles. We supply finished product with certificates that document every component lot and blend date, recognizing the stakes for regulated environments.
We hear frequent questions comparing OSP-680 against traditional synthetic esters, PAOs, and mineral oils. Field feedback forms—filled in garages, not boardrooms—consistently highlight differences. Unlike esters, UCON OSP-680 resists hydrolysis in humid operating conditions. Compared with PAOs, it manages heat and sludge far better, especially in continuous high-load cycles. Mineral oils, long considered the workhorse, simply can’t compete on deposit formation, component cleanliness, or drain interval extension.
We have seen companies try to cut costs with economy-grade lubricants. They inevitably face higher maintenance and more frequent downtime—a false saving. Teams that take a longer view, focused on total cost of ownership rather than just purchase price, report smoother production schedules and fewer unplanned shutdowns once OSP-680 becomes standard in their shops.
Every batch we send from our facilities follows strict internal control protocols—no batch leaves our plant without comprehensive testing for water content, metal contamination, and acid number. Our customers on the plant floor tell us they value a product that’s predicable to handle: OSP-680 has a faint odor, non-toxic formulation, and low volatility. Spills clean up with standard shop procedures, and the fluid avoids the heavy, lingering scent tied to older gear oils. Maintenance crews have told us they appreciate handling a lubricant that neither irritates skin nor fouls air-handling systems.
We remain committed to supporting safety improvements. UCON OSP-680 contains no intentional heavy metals, chlorine, or hazardous secondary additives often found in low-grade substitutes. This makes it less harmful in the event of accidental discharge and enables safer waste management practices in compliance with ISO 14001-certified environmental stewardship commitments.
In large operations, the question of what happens to lubricants after use comes up nearly as often as initial performance. Through focused R&D, our process for UCON OSP-680 minimizes by-products and waste. PAG lubricants like this degrade faster under industrial reclamation conditions. Where permitted, spent oil can be processed through existing waste treatment streams, unlike many mineral or PAO-based oils that require specialized disposal.
Production byproducts are captured, treated, and, where possible, repurposed as secondary raw materials. We work with downstream partners to support safe recycling and help complex facilities integrate OSP-680 into broader sustainability audits. Our bulk customers appreciate not just higher performance, but also the ability to streamline their waste oil handling—and in dozens of plant audits, this has made a measurable impact on environmental management scores.
Some synthetic fluids compromise seals, hoses, or painted surfaces over time, but UCON OSP-680 avoids this through targeted formulation work. Compatibility testing in our lab—stretching over months—demonstrates long-term integrity with NBR, FKM, PTFE, and most filled plastics commonly found in compressors and gearboxes. Visual inspection and hardness measurements on real gaskets and seals confirm this advantage, which is passed down from batch to batch by careful raw material selection and rigorous blending.
While it’s tempting to mix and match fluids in daily practice, transitions to OSP-680 require planning. Though miscible with other high-grade PAGs, we urge a full flush of mineral oils to enjoy the full benefit—our support staff regularly oversees these changeouts, training customer crews and sharing field-developed procedures for best results.
Success with PAGs isn’t automatic. After supporting hundreds of conversions and drain intervals, we’ve learned that operator training, attention to filtration, and compatible elastomers all play a role in getting the best out of OSP-680. The most successful users dedicate time up front to equipment inspection and cleaning. The feedback loop from these communities helps us refine our protocols and make each batch better.
Some challenges still surface. For example, OSP-680 will pick up and suspend some polar contaminants more readily than mineral oil, so high quality filtration matters, particularly where fine particulates or water ingress is persistent. We offer tailored technical bulletins and field support as part of long-term supply agreements, walking line crews through best practice and providing ongoing sampling kits for in-use monitoring. This partnership approach, rooted in decades on the plant floor, results in real cost and uptime benefits.
Bulk users across plastics, textile, and automation industries send us feedback on the direct savings achieved since switching. They report cutting oil changes in half, planned downtime dropping by weeks over a calendar year, and internal component life nearly doubling. Our own follow-up audits usually confirm that bearings, gears, and seals all look cleaner and show less wear. It’s not unusual to see consistent energy savings as a result of lower friction and improved thermal management, especially in high-speed gear trains.
Real-world savings don’t only appear in large urban plants; even small operators in resource-constrained settings find value in the cleaner machinery and rare filter blockages. Across the board, equipment runs closer to nameplate efficiency ratings, and operators trust that a single drum of OSP-680 will perform under both routine and emergency conditions.
Innovation doesn’t stop at a single product line. As manufacturers, we stay tuned into feedback from every customer—listening to insights from maintenance leads, machine operators, designers, and independent labs. This real-world feedback feeds our continuous improvement process, whether it means tweaking additives, enhancing purity, or tuning base stocks for new generations of machinery.
Emerging requirements for lower emissions, longer service intervals, and broader compatibility will shape future versions of the UCON line. We’ve already initiated pilot projects with select partners to extend fluid lifetime even further and to enable safer blending transitions with next-generation materials. Through transparent testing and open communication with those who use our products daily, we ensure new formulations carry practical value alongside improved technical performance.
Our experience manufacturing SYNALOX PAG Lubricant UCON OSP-680 has taught us that practical improvements matter more than theoretical claims. Uptime, clean operation, worker safety, and worry-free maintenance all drive product design. This lubricant brings together reliability, advanced chemistry, and a deep respect for what our customers are trying to achieve on every shift.
Long-term trust isn’t built in a lab—it’s earned every day on the plant floor. OSP-680 takes the lessons we’ve learned after years in chemical processing, distillation, and blending and puts them back into circulation. We’re proud to work side-by-side with operators, plant managers, and maintenance crews, always striving to deliver fluids that make a measurable difference in uptime, cost savings, and operational efficiency. If your equipment relies on continuous performance, the track record and field-tested outcomes of UCON OSP-680 show that thoughtful formulation pays dividends over the long haul.