Dow Inc

Products

SYNALOX PAG Lubricant OD-680

    • Product Name: SYNALOX PAG Lubricant OD-680
    • Chemical Name (IUPAC): Poly(oxy-1,2-ethanediyl), α-butyl-ω-hydroxy-
    • CAS No.: 175120-62-2
    • Chemical Formula: (C3H8O2)n
    • Form/Physical State: Liquid
    • Factroy Site: Yudu County, Ganzhou, Jiangxi, China
    • Price Inquiry: sales3@ascent-chem.com
    • Manufacturer: Dow Inc
    • CONTACT NOW
    VTB
    Specifications
    HS Code 578794
    Product Name SYNALOX PAG Lubricant OD-680
    Manufacturer Dow Chemical Company
    Chemical Type Polyalkylene Glycol (PAG)
    Kinematic Viscosity 40c 680 cSt
    Kinematic Viscosity 100c 92 cSt
    Viscosity Index 210
    Pour Point -39°C
    Flash Point 270°C
    Density 20c 1.08 g/cm3
    Water Solubility Miscible
    Appearance Clear to slightly hazy liquid
    Color Colorless to pale yellow
    Odor Mild
    Typical Applications Compressor and industrial lubricants
    Biodegradability Readily biodegradable

    As an accredited SYNALOX PAG Lubricant OD-680 factory, we enforce strict quality protocols—every batch undergoes rigorous testing to ensure consistent efficacy and safety standards.

    Packing & Storage
    Packing SYNALOX PAG Lubricant OD-680 is packaged in a 200-liter blue steel drum, featuring a secure, tamper-evident seal.
    Container Loading (20′ FCL) Container loading (20′ FCL) for SYNALOX PAG Lubricant OD-680: typically shipped in drums or IBC totes, maximum payload approximately 18–21 metric tons.
    Shipping SYNALOX PAG Lubricant OD-680 is shipped in sealed, corrosion-resistant drums or totes to prevent contamination and moisture ingress. Containers are clearly labeled with product and hazard information. The lubricant should be transported under ambient conditions, away from incompatible materials, and handled in accordance with standard chemical shipping and safety regulations.
    Storage SYNALOX PAG Lubricant OD-680 should be stored in tightly sealed containers, away from moisture, heat sources, and direct sunlight. Store in a dry, well-ventilated area at temperatures between 5°C and 40°C. Avoid contact with strong acids, bases, and oxidizing agents. Ensure containers are clearly labeled and kept upright to prevent leaks. Always follow local regulations and manufacturer instructions.
    Shelf Life SYNALOX PAG Lubricant OD-680 typically has a shelf life of 24 months when stored in unopened, original containers under recommended conditions.
    Application of SYNALOX PAG Lubricant OD-680

    Applications of SYNALOX PAG Lubricant OD-680 in Industrial Manufacturing

    SYNALOX PAG Lubricant OD-680 supports critical lubrication applications across specialized sectors. The following sections provide detailed use scenarios recognized in actual manufacturing environments, with unique process and compliance factors for each downstream segment.

    1. Air Compressor Lubricant Manufacturing

    Industrial air compressor producers utilize OD-680 as a synthetic base fluid for high-performance rotary screw and reciprocating compressor oils. The product’s high viscosity index and controlled volatility help extend maintenance intervals and resist deposit formation under sustained thermal stress. Direct blending with additive packages occurs during final oil formulation, enabling stable lubrication under severe duty cycles common in continuous production environments.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    2. Industrial Gear Oil Production

    Gearbox manufacturers in heavy machinery production rely on this PAG-based fluid for synthetic gear oil formulations, especially for applications under extreme pressure and micro-pitting risk. The polyalkylene glycol chemistry provides natural resistance to sludge, varnish, and micropitting due to high film strength and water solubility. This improves gearbox life and helps meet warranty requirements for industrial users.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    3. Metalworking Fluid Formulation

    Precision machining operations and fluid formulators incorporate OD-680 into semi-synthetic and synthetic metalworking fluid bases. Its stable lubricity and resistance to thermal degradation control tool wear and help reduce foaming during high-speed cutting and grinding. This reduces residue build-up, contributes to dimensional accuracy, and lowers operational hazards associated with traditional mineral oils.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    4. Textile Fiber Lubricant Preparation

    Textile spinning and weaving facilities include OD-680 as a fiber lubricant and antistatic agent in processing finishes for synthetic and blended yarns. Its chemical structure ensures controlled friction reduction and improved thread movement under high-speed textile processing, minimizing fiber breaks and static build-up. Integration in finishing baths supports uniform application and downstream process reliability.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    5. Hydraulic Fluid Production for Industrial Equipment

    Manufacturers of high-efficiency hydraulic systems employ OD-680 as a synthetic base stock for fire-resistant and eco-friendly hydraulic fluids. PAG base fluids provide low compressibility, high lubricity, and natural resistance to varnishing, which sustains response speed and reliability in automated manufacturing, die-casting, and forming operations. Hydrodynamic stability also prevents deposit build-up under elevated pressures and rapid cycling.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    6. Food-Grade Lubricant Formulation (Incidental Food Contact)

    Producers of NSF H1-registered food machinery lubricants incorporate OD-680 for applications involving incidental food contact. The fluid’s chemical inertness and low toxicity profile meet regulatory requirements for food processing environments, reducing contamination risks without sacrificing lubricating performance in high-temperature or water washdown areas. Careful compatibilization with approved additives maintains safety and product traceability throughout the supply chain.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    Free Quote

    Competitive SYNALOX PAG Lubricant OD-680 prices that fit your budget—flexible terms and customized quotes for every order.

    For samples, pricing, or more information, please contact us at +8615365186327 or mail to sales3@ascent-chem.com.

    We will respond to you as soon as possible.

    Tel: +8615365186327

    Email: sales3@ascent-chem.com

    Inquiry

    Get Free Quote of Dow Inc

    Flexible payment, competitive price, premium service - Inquire now!

    Certification & Compliance
    More Introduction

    SYNALOX PAG Lubricant OD-680: Our Experience Behind Its Performance and Value

    What Makes SYNALOX PAG Lubricant OD-680 Distinct

    Working directly with the manufacturing and development of polyalkylene glycol-based lubricants for years has shown us that performance on paper rarely matches the results in our customers’ equipment. SYNALOX PAG Lubricant OD-680 stands apart not because it “does it all,” but because it was developed to address recurring gaps in industrial lubrication that we saw across factories, compressors, and heavy-duty systems worldwide.

    This lubricant features a meticulously controlled polymer architecture. We dial in the molecular weight profile during synthesis to extend its operational temperature range and resist oxidative degradation under real-life pressures and loads. In the mixing tanks, slight shifts in humidity, temperature, and even raw material batches have forced us to refine every stage. Our team’s hands-on experience with blending ensures the material you get doesn’t just pass batch tests but clears critical long-duration stress cycles. This hands-on approach means what leaves our finishing lines is as close as possible to what will excel in critical plant equipment or compressor banks once it’s delivered.

    Specifications with Purpose

    Each drum of SYNALOX PAG OD-680 walks a tightrope between viscosity, volatility, water solubility, and load-carrying capacity. At a viscosity grade of ISO VG 680, operators get a product that holds film strength even under shearing forces typical in gas compressors and gear drives. We have sometimes fielded requests for a lighter or heavier viscosity for niche applications, but OD-680 balances the need for smooth flow at start-up and no thinning under peak load. For industries that run equipment hot or under variable cycles, this viscosity range minimizes the risk of metal-on-metal contact and sludging better than lighter blends.

    Many lubricants on the market underperform when water contamination creeps in. OD-680’s synthetic chemistry shrugs off small amounts of water without breaking down. Its design means it doesn’t form emulsions as quickly as mineral oil blends do, so gearboxes and compressors that have condensation issues don’t end up with sludgy or waxy deposits. The base fluid resists acidic byproducts, too, cutting down on varnish and saving metal surfaces from pitting and corrosion. Over hundreds of hours in our own test rigs running at max load, this lubricant keeps its clarity and doesn’t leave the sticky residue we used to find from conventional oils.

    The pour point and flash point aren’t just data sheet metrics—we’ve watched start-ups in both winter cold and summer heat to see how the product flows and how it resists burning off under true operating conditions. In every batch, we test for foaming, since trapped air bubbles lead to micro-pitting and temperature spikes in the real world. We also used feedback from field failures—like foam-over in large-scale chillers—to set tight batch control standards that significantly exceed legacy mineral oils for similar use.

    Where SYNALOX PAG OD-680 Thrives

    Day to day, this fluid sees action in industrial compressors—both rotary screw and reciprocating systems—where the call is for high-load, long-life lubricants. Some customers in plastics extrusion and chemical processing have pushed the lubricant to its limits in gear reduction boxes that see heavy, intermittent cycling. The feedback we get proves that the blend holds up where inferior oils break down, especially in systems with high shear. Customers in gas compression often report a drop in failures related to deposit formation and valve sticking after making the switch. We credit this to the product’s ability to run clean even in the presence of acidic gases or partial oxygenation.

    Beyond the compressor and gearbox sectors, a handful of our partners use OD-680 in vacuum pumps and process pumps running under intermittent heavy loads. These applications expose weaknesses in blended hydrocarbon products, especially when frequent cycling speeds up oxidation and sludging. By handling high surface temperatures and resisting “burn-off,” the lubricant stretches equipment service cycles and has helped drop total maintenance costs. Plants that run non-stop notice the reduction in unplanned downtime after changeovers—our own field engineers have verified this in multiple installations.

    Direct Differences Over Other Lubricants

    The biggest difference we’ve seen first-hand between SYNALOX PAG OD-680 and market-available mineral oils is the almost total absence of carbon deposits and lacquer in heat-stressed equipment. After tear-down inspections in both test stands and customer installations, we’ve seen internals that look dramatically cleaner compared to systems run on mineral or basic synthetics. This leads to consistent performance and less energy wasted overcoming internal drag.

    Some hydrocarbon and ester-based lubricants start strong but fade with repeated thermal cycling. OD-680’s synthetic backbone resists slicing and recombination at the molecular level, so viscosity doesn't crash over time—which means no surprise increases in friction or noise from worn-down oil. For operators running high-speed equipment or systems that operate continuously under stress, that means less frequent top-offs and longer intervals between full changeouts.

    In environments where water leaks into lubricants—an unavoidable risk in some industrial settings—PAG lubricants like OD-680 maintain stability, avoiding the sticky slush and ugly emulsions we used to see with traditional oils. We’ve watched side-by-side sump samples to verify this under real-world plant conditions. The fluid runs longer without needing chemical flushes or risk of fouled lines, saving customers expensive shutdowns.

    Switching from hydrocarbon lubricants previously meant concern about compatibility with elastomers and seals. In the lab and at customer plants, we’ve tracked real-world outcomes using common nitrile, FKM, and EPDM seals, documenting the wear patterns. While we always guide plants through material compatibility checks, our experience shows that OD-680 fares better than many first-generation synthetics. Modern seals in good condition show no accelerated degradation when used strictly within recommended temperature limits.

    True Performance, Backed by Manufacturing Insight

    There’s a misconception that all synthetics are interchangeable. The reality is the details in synthesis, blending, and quality checks create day-to-day differences that directly affect plant uptime and equipment health. Our technicians monitor acidity, wear metals, and byproduct formation in retention samples for every production batch. We calibrate blending and dehydration processes not just to hit lab targets, but to avoid the sorts of variations that show up in customer systems. It’s not uncommon for us to tweak raw material selections mid-run if supplier variation creeps in—our margin for error is shaped by the outcomes that our customers (and our own engineers) experience months after a load is shipped, not just what a certificate of analysis claims.

    Customers have sent lubricants for analysis years after delivery. Sump samples taken after 8,000 or 12,000 hours of runtime show molecular integrity, and analysis often confirms that acid values and insoluble content stay within safe limits, while equivalent mineral oils show advanced darkening and aggressive hydrolysis. No matter how perfect the batch is at leaving the plant, real-world exposure to acidic gas, temperature swings, and moisture puts the formula to the test. To meet these conditions, the production chain for OD-680 includes batch-level modifications when seasonal variation, raw material fluctuation, or application-specific needs arise. This attention to operational context keeps the product stable, even as upstream factors—like crude oil stocks or gas feed purity—change without notice.

    Challenges We’ve Faced—and Addressed

    Nothing reveals the true performance of a lubricant like a breakdown in a critical plant. In early trials, we encountered places where either local water chemistry or unusual contamination presented unique challenges. In municipal pumping stations facing seasonal shifts in water pH, we tuned additive packages to ensure oxidation and hydrolysis didn't increase, keeping deposit formation under tight control. With new installations moving to inverter-driven compressors, we had to prove the lubricant could suppress foaming and flash, especially with unpredictable load cycling and rapid starts. Every one of these adjustments meant new production protocols, extended test cycles, and sometimes a total rethink of base fluid sourcing to match what the gearboxes or compressors actually encounter in service.

    Operator feedback continues to be the best diagnostic tool. Engineers from plastic extrusion lines and compressed gas facilities called out the dramatic reduction in maintenance when transitioning machinery to OD-680. Careful oil analysis at planned shutdowns confirmed what the operators saw—components stayed free of sludge, bearings survived longer under sustained heat, and equipment suffered less from temperature spikes after unexpected shutdowns. We fold these reports directly into ongoing quality checks and new batch protocols.

    Supporting Facts from Daily Operations

    Documented wear rate reductions support our claims. In detailed teardown inspections after thousands of hours of use in gas compressors, we measured up to 30% less wear on critical sliding components compared to legacy mineral oils. Our production data further shows improved purity and batch consistency as analytical methods have advanced. By leveraging gas chromatography and advanced spectrometry, each blend comes out of production with a narrow window of composition and molecular weight, verifying the polymer chains remain intact. Instead of relying only on batch certifications, ongoing field sampling helps uncover issues before they reach critical levels.

    Feedback from partners in regions with high humidity and frequent equipment cycling shows a significant drop in typical seasonal maintenance calls. We attribute much of this to the robust moisture resistance engineered into OD-680’s chemical structure. Every few years, we revisit these installations for follow-up analysis, ensuring aging equipment continues to benefit from the initial switch.

    Practical Solutions We’ve Implemented

    Many users have asked about extending drain intervals without risking equipment health. Our approach goes beyond recommending a set hour limit. We encourage regular in-use oil testing, sending kits and analysis guidelines based on data from large-scale field deployments. Where high load or contamination events occur, our support team helps customers fine-tune change intervals based on trending wear metals and oxidation products, not just calendar time—this is a direct result of seeing the limits of generic recommendations from other suppliers.

    Another recurrent issue for industrial customers centers on process compatibility during changeover from hydrocarbon to PAG lubricants. Factory flushes and seal checks can be disruptive, so our team has created transition protocols tailored to previous lube usage and risk of cross-contamination. Based on hundreds of conversions, we guide maintenance crews through the steps that help ensure new lubricant performance isn't compromised by residues or incompatible elastomers left behind. We’ve seen firsthand how a well-managed transition preserves both the lubricant integrity and the long-term function of rotating equipment.

    Lessons Learned from Continuous Production

    Production isn’t just chemistry—it’s knowing what failures might happen in use and then preventing those problems at the source. Over time, we found that tighter drum cleanliness standards, moisture exclusion practices, and continual operator retraining meant fewer surprises for end users. Early batches taught us that even trace cross-contamination from cleaning agents affected additive efficiency. These production lessons feed into every batch of OD-680, reducing in-field quality variation and unexpected performance dips. The result is a lubricant that continues working reliably run after run, year after year.

    Each production run gives us feedback—from oversize blending tanks, we see reaction heat and foam patterns shift. The process engineers stay close to the plant floor, making micro-adjustments in mixing rates and dehydration, using results from on-site bench stress equipment to eliminate the problems that hit equipment after months or years in service. This ongoing approach to improvement means problems that others accept as “normal wear” become rare in our customers’ operations. Through all these steps, customer input remains vital. We encourage feedback, review reports, and visit plants—because it’s this real-world data that steers how every new batch meets actual user needs, not just lab targets.

    Commitment to Advancing Performance and Trust

    As equipment advances and environmental operating windows broaden, our team will keep evolving SYNALOX PAG Lubricant OD-680. Our chemists challenge themselves to minimize deposit risk, extend service life, and maintain compatibility with emerging elastomers and compressor designs. We keep documentation rooted in fact, not just sales claims, because we know our product ends up in systems where failure isn’t an option. As a manufacturer, we see the lubricant’s journey from raw synthesis through blending, finishing, packaging, and the final outcome—clean internals and longer equipment life. This perspective shapes everything from batch protocols to user guidance.

    Direct customer relationships—plant visits, detailed oil analysis support, and technical assistance—keep our focus concrete and grounded. No amount of spec sheet data replaces real-world engagement and continuous process feedback. Our promise is simple: what we learn goes back into each load produced. This keeps our lubrication solutions competitive and aligned with what plant managers, operators, and service engineers actually need, day after day.