| HS Code | 805926 |
| Product Name | SYNALOX PAG Lubricant 50-25B |
| Chemical Type | Polyalkylene Glycol (PAG) |
| Appearance | Clear to slightly hazy liquid |
| Color | Colorless to pale yellow |
| Kinematic Viscosity 40c Cst | 45-55 |
| Kinematic Viscosity 100c Cst | 9.0-10.5 |
| Viscosity Index | 195-210 |
| Pour Point C | -55 |
| Flash Point C | 270 |
| Density 20c G Cm3 | 1.02 |
| Water Solubility | Fully soluble |
| Typical Acid Number Mgkoh G | <0.05 |
| Recommended Applications | Compressor and industrial lubrication |
| Biodegradability | Readily biodegradable |
As an accredited SYNALOX PAG Lubricant 50-25B factory, we enforce strict quality protocols—every batch undergoes rigorous testing to ensure consistent efficacy and safety standards.
| Packing | The SYNALOX PAG Lubricant 50-25B is packaged in a 200 kg blue steel drum with secure lid and product labeling. |
| Container Loading (20′ FCL) | Container Loading (20′ FCL) for SYNALOX PAG Lubricant 50-25B: Approximately 80-100 drums (200 kg each) per 20-foot container. |
| Shipping | SYNALOX PAG Lubricant 50-25B is shipped in secure, sealed containers, typically drums or totes, compliant with industry and regulatory standards. The product should be stored and transported in a cool, dry area, away from sources of ignition or incompatible substances. Handle with proper protective equipment to prevent spills and exposure. |
| Storage | **SYNALOX PAG Lubricant 50-25B** should be stored in tightly closed, original containers in a cool, dry, and well-ventilated area, away from direct sunlight, heat sources, and incompatible materials such as strong acids and oxidizers. Avoid moisture ingress. Store at temperatures between 0°C and 40°C. Ensure proper labeling and keep away from food, drink, and animal feed areas for safety. |
| Shelf Life | The **shelf life** of SYNALOX PAG Lubricant 50-25B is **two years** from the date of manufacture when properly stored. |
SYNALOX PAG Lubricant 50-25B demonstrates proven downstream value in demanding lubrication scenarios that require exceptional thermal stability, low residue formation, and strong compatibility with diverse metal surfaces or synthetic materials. As direct manufacturers, we deliver formulation-ready material that conforms to stringent industry-specific requirements, supporting efficient and reliable production of high-performance finished goods.
Leading compressor oil formulators select this base fluid for rotary screw and vane compressor lubricants thanks to its consistent viscosity index, oxidative resistance, and negligible carbonaceous buildup. Developed specifically for environments with high discharge temperatures, it addresses frequent maintenance issues found with mineral or ester oils, while supporting extended drain intervals for reduced total cost of ownership in industrial plants.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Industrial gearbox manufacturers and operators utilize SYNALOX PAG Lubricant 50-25B in formulating lubricants for enclosed gears, especially in applications requiring resistance to micropitting, copper corrosion, and foaming. The product's intrinsic high film strength under high-load sliding conditions, combined with low traction coefficients, delivers efficiency improvements for worm gears in heavy-duty conveyors and extruders.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Specialty metallurgical processors adopt SYNALOX PAG Lubricant 50-25B to develop aqueous polymer quenching fluids for controlled cooling of aluminum alloys. The material allows precise adjustment of cooling rates by varying polymer concentration, supporting tight metallurgical property targets and distortion control in aerospace and automotive heat treatment lines.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Food-grade lubricant producers formulate specialty chain oils using SYNALOX PAG Lubricant 50-25B as the carrier for bakery oven, fryer, and pasteurizer conveyor applications. Its clean burn-off characteristics, minimal residue, and compatibility with food-safe additive packages make it suitable for continuous high-heat belt and chain lubrication in compliance with global food safety directives.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Producers of fire-resistant hydraulic fluids for metallurgy and forming industries employ this PAG lubricant to achieve excellent hydrolytic stability and anti-wear behavior under extreme pressure. This helps downstream users maintain process safety in hydraulic circuits exposed to open flames and molten metal, while minimizing sludge and varnish build-up.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Producers of specialty textile spin finishes formulate with SYNALOX PAG Lubricant 50-25B to improve fiber processing by reducing static accumulation and filament breakage during high-speed synthetic yarn spinning and texturizing. Its thermal stability and controlled volatility optimize spin finish effectiveness across multiple fiber lines, supporting uniform lubrication under harsh process conditions.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Competitive SYNALOX PAG Lubricant 50-25B prices that fit your budget—flexible terms and customized quotes for every order.
For samples, pricing, or more information, please contact us at +8615365186327 or mail to sales3@ascent-chem.com.
We will respond to you as soon as possible.
Tel: +8615365186327
Email: sales3@ascent-chem.com
Flexible payment, competitive price, premium service - Inquire now!
Every day, we see a range of demands placed on industrial lubricants. Tighter tolerances, higher speeds, and unpredictable working conditions put even proven formulations to the test. As a chemical manufacturer dedicated to hands-on research and long production runs, we spend a lot of time in direct contact with how lubricants behave in real processes. SYNALOX PAG Lubricant 50-25B stands out because it addresses genuine operational hurdles. It’s not just another name on a data sheet—we know this product from hundreds of reaction batches and rigorous internal trials.
Model 50-25B sits comfortably in our line of polyalkylene glycol-based lubricants. In the case of this model, the numbers reflect core properties derived from the molecular backbone and end-group chemistry—both are critical in real applications. The 50 indicates a viscosity grade that sits right in the sweet spot for gearboxes, compressors, and hydraulic circuits processed at our plant. The 25B specification means we tune both molecular weight and water solubility to match where mineral oils and common synthetics fall short.
Throughout years of manufacture, we learned that consistency in molecular distribution translates into reliable lubrication film thickness. On the floor, you can measure the drop in temperature and friction over continuous hours of machine activity. 50-25B offers clean separation on metal surfaces and resists coking during extended episodes at high-load and elevated temperature—the molecular architecture is deliberately built for these outcomes, which show up in measurable ways for our customers.
In our workshops and partner factories, SYNALOX PAG Lubricant 50-25B has proven its worth. Unlike mineral-based oils, this PAG excels in environments where micro-pitting and varnish deposits cripple bearing life. Our field engineers noticed that heat control improves dramatically in screw compressors and open-gear assemblies, with lubricant films remaining stable during temperature spikes. Downtime drops are not theoretical—customers have reported fewer gear replacements and less cavitation in coolant pumps after adopting this formulation.
We supply this lubricant for enclosed gear systems, rotary compressors, and hydraulic systems exposed to high moisture. Unlike standard hydrocarbon oils, this formulation blends with water without forming sticky emulsions. During drain intervals, 50-25B flushes out process residues and takes abrasive microparticles with it. In closed systems with sensitive seals, this characteristic cuts maintenance costs and makes system flushing easier between production campaigns.
Not all systems require the added hydrophilicity and oxidative strength of 50-25B. But for operations running extreme cycles, or exposed to water ingress, these properties make a tangible impact on uptime and hardware longevity.
Manufacturing this PAG lubricant has shown us where many off-the-shelf oil formulations fail. Conventional mineral and PAO-based lubricants tend to build carbonaceous deposits under intense load or elevated temperature. We’ve seen gear teeth blackened with lacquer, bearings pitted, and filter elements clogged with sludge from hours of real operation. Our trials reveal that 50-25B’s molecular design resists this tendency because its structure resists oxidation at the bond level and does not propagate carbon growth.
Ordinary PAGs sometimes pose compatibility complaints with elastomers and paints. Synthetic alternatives may reduce foaming but struggle if coolant or washing fluids leak into closed circuits. To address this, our engineers adjusted terminal groups to improve seal compatibility and limit solvent action. We did not choose additives at random—decisions came after months of immersion tests, seal exposure, and joint trials with OEMs and maintenance teams.
With 50-25B’s enhanced solvency and polarity control, grease build-up and gumming have been minimized even after the lubricant mixes with water during flooded system operation or wash-down cycles. Instead of smearing and hardening under shaft seals and pump gaskets, the product disperses contaminants and carries them to easily filterable fractions. This is not just a design claim, it comes from direct clean-down inspections and failed-part analysis.
Water management remains a central headache in lubrication. Too much water causes film collapse and surface scuffing; too little means inefficient energy transfer and poor cooling. SYNALOX PAG Lubricant 50-25B’s structure attracts and stabilizes a manageable amount of water in solution, helping pull contaminants from critical metal surfaces. Service techs report noticeably cleaner gearboxes and compressor chambers during scheduled inspections.
Operating costs in real plants depend on oil change intervals, gear wear, and unplanned shutdowns. With mineral oils, we frequently received requests to troubleshoot varnish, foaming, and failure to hold pressure across hydraulic assemblies. After hundreds of cylinder cycles, many synthetic-based lubricants thicken or form insoluble residue. In our own trial bays, SYNALOX 50-25B shows improved resistance to thermal breakdown, with measurable declines in acid formation even under high cycling frequencies.
Some operators hesitate to switch based on compatibility or waste management concerns. On the manufacturing side, we mitigate these factors by monitoring batch quality and controlling end-group selection across every production lot. Post-assembly and oil change, maintenance crews report little need for line purging—leftover oils blend more readily into the fresh PAG top-up, reducing disposal and cleaning headaches. It’s a result of meticulous raw material handling, real-world formulation adjustments, and cooperative troubleshooting with field maintenance teams around the world.
As the direct producer, our focus goes well beyond chemical theory. We keep sample reserves of every batch, track performance in our internal fleet, and trace even minor viscosity shifts from lot to lot. Quality control doesn’t stop at viscosity and water content. We run long-term oxidation, seal compatibility, foam inhibition, and high-velocity scuffing tests. All feedback from field service is modeled back into the blending and polymerization step.
Additive stability is not an afterthought. Over years of work, we experimented with dosing strategies to maximize antiwear without sacrificing filterability or foaming control. Our process monitoring team can pinpoint root causes for any performance dip—be it a supply chain variability or a process shift in the reactor. This attention to production detail provides field users with consistent experience across refills, top-ups, and change-outs.
We learned that uncontrolled batch variation is a main contributor to customer disappointment. On the factory floor, this translates into lost trust and warranty claims. In contrast, users of SYNALOX 50-25B report repeatable machine behavior across seasons, temperature shifts, and even supplier changes—thanks to the tight tolerances in our blending and monitoring process.
We keep close contact with shop technicians, OEM designers, and lube route engineers. Their feedback doesn’t end up in a marketing file; instead, it steers adjustments in our product and production line. The experience with 50-25B reflects a collaboration between chemists and users. Gearbox manufacturers using our oil in their warranty and extended service contracts have documented extended service intervals and lower unscheduled maintenance compared to equipment running on earlier-generation mineral oils.
Shops handling food processing, textile production, and precision machining have switched to this formulation for its clean-running nature and ability to avoid sticky residues. Plants facing high humidity or frequent wash-downs rely on this lubricant for its resilience against hydrolysis and avoidance of harmful by-product formation. When field crews report rapid filter clogging, our engineers refer back to the actual product in use. In response to one such case, we reformulated the dispersant package within 90 days, resulting in a marked improvement in field conditions.
Global production demands more uptime and less unplanned maintenance. We understand this from both a resource and economic perspective. Equipment longevity and energy savings are not just buzzwords; they are measured during every operational review. With SYNALOX PAG Lubricant 50-25B, machines run cooler, suffer less wear, and deliver more predictable pressures. Plants report energy savings that can be traced to reduced boundary friction in key components. These direct outcomes reinforce our commitment to continuous product improvement.
Disposal and environmental impact remain daily realities for industrial users. Used lubricant streams sometimes require costly treatment, especially where traditional oils have left behind persistent residues or environmental contaminants. Our internal waste analysis shows that 50-25B produces lower solid waste values and breaks down more readily in permitted recycling operations. We continually work to align production with responsible disposal and recovery strategies—every improvement in product chemistry or process can cut environmental loading without losing performance.
In chemical production, reliability is built from the ground up. Lubricant breakdown or poor stability causes chain reactions across plant maintenance, scheduling, and output quality. SYNALOX PAG Lubricant 50-25B draws on decades of polymer processing, mix optimization, and troubleshooting experience. Its chemistry has survived the test of record-breaking hot years, tough production seasons, and unpredictable raw material shifts. Our real-world focus means formulas are not only laboratory-proven but have survived heat, pressure, and contamination in daily factory operation.
As manufacturers, seeing new press-load records and hearing from customers about reduced sparing needs motivates our team. Gear and compressor OEMs turn to us after hands-on evaluation, citing tangible differences in downtime, failure rates, and component cleanliness. It is easier to stand behind a product when you have tracked its journey from synthesis and blending through installation and service feedback. For us, the integrity of 50-25B reflects a cycle—the product starts with thoughtful chemistry and returns in the form of reliable machinery operation.
Switching lubricants in critical equipment brings concerns about safety, compatibility, and continuity. Manufacturers hear this firsthand from operators responsible for complex automated lines. SYNALOX PAG Lubricant 50-25B was designed with transitions in mind. Many users run side-by-side trials and want to avoid costly strip-downs or unnecessary cleaning steps. Our formulation and strict batch consistency mean transitions can proceed with reasonable simplicity, with manageable blend behavior during change-outs. Our engineers and plant teams stand ready to address application-specific questions, drawing directly on our manufacturing notes and QC records.
Where earlier generations of fluids required drastic system cleaning, 50-25B’s detergent action and managed solvency mean impurities lift out naturally during early operating hours, avoiding the risk of harm to sensitive components. Batch traceability guarantees plant operators access to historical quality records, so every fill is backed by comprehensive data.
Production chemistry evolves every year, responding to changes in machinery, regulatory requirements, and customer experiences. SYNALOX PAG Lubricant 50-25B does not exist in isolation—it is the result of hundreds of conversations with real plant managers, maintenance engineers, and OEM lube specialists. The product as it exists benefits from operator insights, QC feedback, and evolving demands from the field.
Collaboration does not end at delivery. As the product manufacturer, we remain accountable throughout its service lifetime, supporting everything from issue troubleshooting to custom blend adjustments, always using field results to steer further improvements. All insights—from wear particle analysis to gear train efficiency data—flow directly back to our R&D and manufacturing teams. Years of focus on these feedback loops sharpen every batch.
Industrial operations ask for more than theoretical performance—they depend on durable, easy-to-use solutions. We continue refining SYNALOX PAG Lubricant 50-25B, building on what trusted customers teach us through their everyday use and challenge. Our direct control over manufacturing means each lot is born from experience, stands up to scrutiny in the real world, and sets a standard for lubricating performance in the most demanding machines of today and tomorrow.
Our ongoing focus remains on providing products that drive lower total lifecycle costs, greater equipment protection, and consistent, predictable behavior under operating stress. This comes not only from chemical know-how but from thousands of hours observing, measuring, and improving performance in real manufacturing facilities. Our production team stands ready to support new challenges, always testing, learning, and raising expectations for what a high-performance lubricant should deliver.