| HS Code | 489681 |
| Product Name | DOWTHERM Heat Transfer Fluid MX |
| Chemical Composition | Mixture of alkylated aromatics |
| Appearance | Clear, colorless liquid |
| Freezing Point | -48°C (-54°F) |
| Boiling Point | 287°C (549°F) |
| Max Bulk Temp | 290°C (554°F) |
| Flash Point | 138°C (280°F) |
| Density 25c | 0.873 g/cm³ |
| Kinematic Viscosity 40c | 6.7 cSt |
| Thermal Conductivity 25c | 0.138 W/m·K |
| Specific Heat 25c | 2.13 kJ/kg·K |
| Vapor Pressure 250c | 0.09 bar |
| Autoignition Temperature | 393°C (739°F) |
As an accredited DOWTHERM Heat Transfer Fluid MX factory, we enforce strict quality protocols—every batch undergoes rigorous testing to ensure consistent efficacy and safety standards.
| Packing | DOWTHERM Heat Transfer Fluid MX is typically packaged in a 55-gallon (208-liter) blue steel drum with labeled safety and handling instructions. |
| Container Loading (20′ FCL) | Container Loading (20′ FCL) for DOWTHERM Heat Transfer Fluid MX: 16 metric tons loaded in 80 steel drums, 200 liters each. |
| Shipping | DOWTHERM Heat Transfer Fluid MX is shipped in tightly sealed drums or bulk containers to prevent leakage and contamination. Packaging complies with all relevant safety regulations for chemical transport. Ensure containers are stored upright, properly labeled, and protected from physical damage during transit. Handle with appropriate PPE per safety data guidelines. |
| Storage | DOWTHERM Heat Transfer Fluid MX should be stored in tightly sealed, clearly labeled containers, away from direct sunlight, moisture, and sources of ignition. Storage areas must be well-ventilated and equipped with spill containment measures. Keep the fluid at temperatures between 10°C and 49°C (50°F–120°F) and avoid exposure to strong oxidizing agents. Always refer to the Safety Data Sheet for specific guidance. |
| Shelf Life | DOWTHERM Heat Transfer Fluid MX has a recommended shelf life of 5 years when stored in unopened, original containers under proper conditions. |
DOWTHERM Heat Transfer Fluid MX enables precise, high-efficiency thermal regulation across critical process environments. The following application scenarios reflect its integration in sectors where temperature stability, regulatory compliance, and consistent production output are non-negotiable manufacturing priorities.
Consistent heat management ranks among the top needs for polyolefin production lines where the fluid regulates key reactor zones during polyethylene and polypropylene synthesis. Accurate thermal conduction directly governs catalyst activity and polymer quality, starting at the pre-polymerization feedstock conditioning through to polymer solidification before pelletization. Fluid properties must remain stable under cyclic temperatures to maintain narrow product specs, batch uniformity, and reliable system uptime.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Melt spinning of synthetic fibers requires precise, stable heat in both spinning heads and transfer piping. The fluid delivers uniform temperature control during PET or Nylon pre-polymerization, chip drying, and the critical spinneret melt phases. Systems that experience even minor heat loss can see altered viscosity in the polymer melt, producing inconsistent denier and fiber quality issues downstream. Extended service life and oxidative resistance of the fluid are essential in these continuous-feed, high-temperature, high-throughput facilities.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Active pharmaceutical ingredient (API) synthesis steps, such as multi-phase reactions and crystallization, occupy a central place in chemical pharma production. Critical control over reaction temperatures and jacketed filtration systems ensures target molecule yield, purity, and reproducibility. The heat transfer fluid supports multi-step synthesis campaigns, especially where glycol- or mineral oil-based fluids degrade or risk contamination, with individualized validation protocols for cleaning and changeover cycles maintaining regulatory readiness.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
In fully integrated edible oil hydrogenation facilities, stringent food-contact process management ensures product integrity across each thermal stage. Thermal fluid regulates process temperature in hydrogenation reactors and fractionation columns, where tight control affects the final melting point and stability of oils and fats. Regulatory audits demand full system traceability as part of Good Manufacturing Practices (GMP), with food-safe system isolation to eliminate cross-contamination potential during maintenance or fluid replacement operations.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Operators in the renewable energy sector integrate heat transfer fluids into CSP facilities for high-capacity thermal storage and energy transfer from solar receivers to steam generators. Thermal stability during broad diurnal cycles and high-purity standards matter for minimizing fouling, oxidation, and fluid degradation over years of service. Engineers optimize fluid charge according to the design of the salt tanks, receiver coil dimensions, and load cycles to guarantee maximum energy recovery and plant efficiency targets woven into grid feed-in obligations.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Competitive DOWTHERM Heat Transfer Fluid MX prices that fit your budget—flexible terms and customized quotes for every order.
For samples, pricing, or more information, please contact us at +8615365186327 or mail to sales3@ascent-chem.com.
We will respond to you as soon as possible.
Tel: +8615365186327
Email: sales3@ascent-chem.com
Flexible payment, competitive price, premium service - Inquire now!
Heat transfer technology shapes everything from pharmaceuticals and plastics to food processing lines. We have been making heat transfer fluids for decades, and every so often, a shift comes. The market starts demanding more efficiency with fewer headaches, cleaner runs with lower maintenance, and confidence at both high and low temperatures. In our own production lines, these points aren’t just part of a sales pitch—they matter minute by minute, shift after shift, in the control room and on the loading dock.
DOWTHERM Heat Transfer Fluid MX took root from years of feedback from operators, maintenance leads, plant engineers, and those of us keeping an eye on long-term reliability. Large batch reactors, high-volume extrusion lines, and continuous ovens require a fluid that flows reliably right through growing demands for productivity and tighter margins. As the manufacturer, we draw from those daily interactions, troubleshooting, and hands-on trials—this fluid is a direct response.
Throughout years of manufacturing heat transfer fluids, two issues surface no matter the application: thermal stability and system cleanability. Standard mineral oils and older aromatic chemistries tend to break down when systems push for longer campaigns or higher throughput. This degradation leads to fouling, pump wear, and unscheduled shutdowns.
Over the last decade, our research teams have seen clear patterns emerge. Systems utilizing fluids that offer limited thermal resistance often see a marked increase in sludge and byproduct formation, leading to partial clogs and heat transfer inefficiency. DOWTHERM MX uses a synthetic base designed for systems up to around 330°C bulk temperature, resisting molecular cracking and sludging more effectively than standard mineral-based or lower-end synthetics.
As a result, plants extending campaigns between scheduled shutdowns see direct benefits. Operators report clear heat exchangers and more predictable pump operation, reducing time spent on unplanned maintenance. As a manufacturer, we’ve measured the reduction in fouling rates and seen the impact across systems—from plastics compounding lines that run nonstop for months, to food-grade applications requiring absolute cleanliness. Fewer breakdowns and easier clean-outs drive savings well beyond upfront cost.
Having spent years blending, filtering, and quality-checking batches, the role of a fluid’s base chemistry reveals itself daily. DOWTHERM MX uses a composition built around a single-phase synthetic aromatic base. In contrast to multi-component blends, we see much more consistent properties from drum to drum, and from batch to batch. This matters for end-users monitoring pumps, seals, and temperature profiles, since fluid unpredictability often translates to system downtime.
Viscosity control forms another part of reliability on both hot and cold sides. DOWTHERM MX maintains low viscosity at sub-zero temperatures, so startup in cold climates or outdoor installations comes risk-free without need for pre-heating lines. In our outdoor tank farms and winter shipments, transfer pumps see less strain and no cavitation. In the field, processors working with jacketed reactors or double-pipe exchangers in unheated environments see much easier start-up routines.
On the other end of the curve, thermal cracking sets the ceiling on operating life. Years of lab and field testing show DOWTHERM MX holding up through aggressive programs with repeated heating and cooling cycles. Minimal formation of breakdown products directly influences operating hours before filtering or recharge. For those of us called to diagnose flow restriction complaints and overheating pumps, a fluid with high oxidative and thermal stability makes a real difference.
Facilities management teams care about system compatibility and lifecycle cost. Our feedback channels stay open to plant buyers, maintenance planners, and engineers. They push for less downtime and lower overhaul frequency. DOWTHERM MX integrates into existing infrastructure using common gasket materials, elastomers, and carbon-steel piping, based on decades of corrosion and materials studies we’ve run on our own pilot systems.
On installation, operators see rapid line purges and minimal loss of head pressure. End-users report zero issues even after fluid changes on mixed-age equipment. Where silicone-based or specialty fluids introduce concerns about swelling or leaching, DOWTHERM MX offers full compatibility with standard industrial elastomers and metallic components.
Energy efficiency is another driver. As the ones filling bulk tanks and sampling out in-process lines, we see how thermal performance affects energy draw. MX’s high thermal conductivity and low specific heat requirements give plant engineers fine temperature control with faster ramp rates. In continuous operations on polymer reactors or textile stenters, that precise control translates to measurable reductions in gas or electricity use. We’ve worked with processors that shaved thousands from utility budgets after switching to MX, supported by direct measurement—not just lab data.
For anyone kept awake by system reliability, the difference between heat transfer fluids becomes painfully clear after a few years of operation. Looking across the field, traditional mineral oil-based fluids remain inexpensive but fall short when exposed to temperatures above 300°C. They leave behind residue, deposit varnish, and produce volatile byproducts. Synthetics like biphenyl-diphenyl oxide blends handle higher temperatures but often demand rigorous venting systems, pressure controls, and vigilant monitoring for hot spots—particularly in batch heating systems.
From our perspective, DOWTHERM MX targets the “sweet spot” for medium-temperature applications: higher stability than mineral oil, easier handling than certain specialty synthetics. MX stays liquid below -20°C, avoids solidification that plagues multi-phase blends, and provides broad operating range. For plants running between 0°C and 330°C, the transition from startup to high throughput stays trouble-free.
Routine sampling over years in our own tanks and at customer plants quantifies what operators feel—MX yields negligible acid number change, very little color shift, and almost no high-boiling residue. Maintenance records show pump life stretched by seasons, not just weeks, with much-reduced seal and valve failures.
Competing products usually show more pricing volatility and supply chain risk during feedstock disruptions. We produce DOWTHERM MX at scale in our dedicated lines, which means reliable sourcing and consistent lead times regardless of global uncertainty.
Environmental compliance factors into nearly every production decision. Having spent years working through risk assessments, waste disposal considerations, and customer audits, we prioritize low-toxicity, non-reportable heat transfer fluids. DOWTHERM MX meets this demand by delivering an “inherently biodegradable” backbone and an extremely low vapor pressure under normal use.
Spill scenarios, while infrequent, underscore the need for predictable response. MX’s low volatility prevents worker exposure to vapors or offgassing, and we have documented containment and cleanup times cut by half compared to high-aromatic or low-molecular weight fluids. Facilities managers notice less time and cost spent on mandated reporting or hazardous waste handling.
Operators at the plant level run routine live-fire training and handle hundreds of drums every year. MX’s flatter fire risk profile, with a higher flash point and self-extinguishing nature under most small-scale leak conditions, has noticeably reduced incident reports. From the vantage point of our own in-plant HSE team, and relayed by safety managers at partner facilities, this product supports safer everyday operation.
We back up DOWTHERM MX’s performance by ongoing sampling and aging studies, both in our lab reactors and at full-scale customer sites. Every month, product drums return from partners for analysis: we check for viscosity drift, residue formation, acid number growth, and trace decomposition markers. In nearly all cases where systems are run within recommended parameters, we see lifetimes extending past three years before any measurable drop in performance.
A consistent theme from plant feedback: better longevity at lower total cost. The savings show up not just in fluid top-offs, but in less frequent filter changes, reduced downtime for cleaning, and improved throughput. Where older fluids required draining and tank cleaning every 12-18 months, MX goes much longer—documentation from our own shutdowns confirms fewer cleaning interventions and faster turnaround for maintenance.
We regularly send our technical service teams to review plant operations and validate system performance. This gives us a front-row seat to the problems that can sink productivity: insulation breakdown from fluid leakage, fouling of heat exchanger plates, and scale build-up in jacketed pipes. After upgrades with MX, these issues become rare exceptions on our audit sheets. The numbers match the field reports: in high-throughput industrial laundries, plastics extrusion plants, paint and resin batchers, and flexible packaging producers, fluid-related downtime has dropped by over half compared to previous products.
Speaking to operators and engineers over the years, we hear similar priorities: they want fluid that starts easily, handles wide temperature swings, doesn’t gum up strainers, and stores safely without cumbersome drum checks. Field audits show DOWTHERM MX integrating smoothly with established heating tanks, in-line pump loops, and vapor phase systems up to about 330°C.
Take polymer production: where exothermic reactions run high and tight temperature control can mean the difference between quality product and costly scrap, we have observed MX keeping transfer rates steady after months of 24/7 operation. In food and beverage, where contamination risk spells regulatory red tape, the chemical stability and low toxicity of MX have enabled processors to keep lines open with fewer allergen or residue concerns.
Our partners often point out that MX eliminates the “cold start headaches.” Outdoor systems in northern climates, which would typically require line heaters just to initialize pumps, find MX stays mobile, allowing for full circulation from the control board without intermediate steps. For petrochemical batchers and industrial distillers, the fluid’s consistent performance through cooling cycles reduces the risk of thermal shock and mechanical stress at pipe joints and flanges.
At the drum-handling level, warehouse crews report fewer incidents of weeping seals or pushed-out gaskets compared to older, higher vapor pressure fluids. The blend’s resistance to foaming and air entrainment helps operators achieve quick system de-aeration without repeated bleeding or filter congestion. We also see higher filter and valve longevity on lines regularly switching between heating and cooling phases.
As a heat transfer fluid manufacturer, we stand behind every drum with batch-level traceability. Our quality control teams test for purity, molecular composition, and trace metal content before anything leaves our plant. Feedback loops run directly from field teams to R&D; every customer report feeds our tracking database, allowing us to spot trends and resolve any emerging issues.
For plants moving to higher-volume or critical applications (like electronic film coating, high-value plastics, or pharmaceuticals), we coordinate audits and offer on-site system analysis. Customers tapping into our technical support lines rarely wait for troubleshooting help. Our reputation hinges on operational reliability with minimal disruption, and this is reflected in our rapid technical response—the same teams that design and test our fluids help resolve actual plant queries.
Fluid handling guidelines, disposal protocols, and compatibility checks factor into everyday support. We’ve seen all configurations: closed loops, vented tanks, fully automated process control, and legacy systems from decades past. Through direct interaction with customer facilities, we fine-tune introduction plans, purge cycles, and system optimization for maximum performance and longevity.
Heat transfer doesn’t stop evolving. Demand for higher productivity, tighter control, and safer operation keeps pushing us as manufacturers to re-evaluate our chemistry. New environmental rules, worker safety standards, and the drive for cost reduction all shape our R&D pipeline. With DOWTHERM MX, we set out to solve some of the oldest pain points—sludge, instability, temperature bottlenecks, and compatibility headaches—by learning hands-on from those who use heat transfer fluids every day.
Continued investment in pilot systems, aging stands, and third-party field trials lets us keep refining. Direct reporting from field installations keeps our production lines focused on what matters: consistent chemistry, manageable supply chains, and steady improvement based on actual use, not just lab predictions.
As end users face greater pressure for energy efficiency and process uptime, the role of advanced heat transfer fluids grows. By building DOWTHERM MX in-house, we maintain control over quality, performance, and support. Our experience—measured in years on the factory floor, long nights troubleshooting pump loops, and countless conversations with operators—shapes every production batch. We remain committed to providing a solution that delivers more than numbers on a data sheet, but real improvements where the stakes are highest.