Dow Inc

Products

DOWTHERM Heat Transfer Fluid J

    • Product Name: DOWTHERM Heat Transfer Fluid J
    • Chemical Name (IUPAC): 1,1,1,2-Tetrafluoroethane
    • CAS No.: 34650-42-9
    • Chemical Formula: C14H10
    • Form/Physical State: Liquid
    • Factroy Site: Yudu County, Ganzhou, Jiangxi, China
    • Price Inquiry: sales3@ascent-chem.com
    • Manufacturer: Dow Inc
    • CONTACT NOW
    VTB
    Specifications
    HS Code 490106
    Chemical Name Diphenyl Oxide and Biphenyl Mixture
    Appearance Clear, colorless to pale yellow liquid
    Boiling Point 257°C (495°F)
    Freezing Point 12°C (54°F)
    Density 1.06 g/cm³ at 25°C
    Flash Point 113°C (235°F)
    Autoignition Temperature 621°C (1150°F)
    Thermal Conductivity 0.099 W/m·K at 38°C
    Specific Heat 1.78 kJ/kg·K at 38°C
    Maximum Bulk Temperature 400°C (750°F)
    Vapor Pressure 1.4 mmHg at 204°C
    Solubility In Water Insoluble

    As an accredited DOWTHERM Heat Transfer Fluid J factory, we enforce strict quality protocols—every batch undergoes rigorous testing to ensure consistent efficacy and safety standards.

    Packing & Storage
    Packing DOWTHERM Heat Transfer Fluid J is packaged in a 208-liter (55-gallon) steel drum, labeled with product details and safety information.
    Container Loading (20′ FCL) DOWTHERM Heat Transfer Fluid J is loaded in a 20′ FCL, ensuring secure, leak-proof drum or tote packaging for safe transport.
    Shipping DOWTHERM Heat Transfer Fluid J is shipped in secure, corrosion-resistant drums or totes to prevent contamination and moisture ingress. Packaging meets international transport regulations for chemicals, with appropriate labeling and documentation. Ensure upright positioning and avoid extreme temperatures during transit. Handle with care and consult the Safety Data Sheet for detailed shipping and handling instructions.
    Storage DOWTHERM Heat Transfer Fluid J should be stored in tightly sealed, clearly labeled containers, away from direct sunlight and sources of ignition. Storage areas must be well-ventilated, cool, and dry, with temperatures maintained below 49°C (120°F). Incompatible materials, such as strong oxidizers, should be avoided. Appropriate safety measures, including secondary containment, should be employed to prevent spills and leaks.
    Shelf Life DOWTHERM Heat Transfer Fluid J typically has a shelf life of 5 years when stored in unopened, original containers under recommended conditions.
    Application of DOWTHERM Heat Transfer Fluid J

    Applications of DOWTHERM Heat Transfer Fluid J in Industrial Manufacturing

    DOWTHERM Heat Transfer Fluid J supports critical heat management tasks in several demanding industrial sectors. Our manufacturing uses rigorous quality controls to ensure fluid reliability for exacting downstream applications. Below are primary industries utilizing this material, highlighting each sector's compliance, dosage regimen, integration into production, and end-use goods.

    1. Polyurethane Foam Production

    Manufacturers use DOWTHERM Heat Transfer Fluid J extensively during the continuous slabstock and molded polyurethane foam production process. The fluid serves as a thermal medium for precisely managing exothermic curing reactions within tightly controlled jacketed molds and conveyor systems. Stable temperature control prevents foam scorching, ensures uniform cell structure, and minimizes cycle times across diverse isocyanate and polyol systems.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    2. Synthetic Fiber Manufacturing

    DOWTHERM Heat Transfer Fluid J provides precise temperature mediation within spinneret and draw tower assemblies during polyester, nylon, and acrylic fiber synthesis. Accurate thermal management mitigates polymer degradation, stabilizes melt viscosity, and promotes even filament formation crucial for downstream fiber strength, uniformity, and dye uptake.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    3. Pharmaceutical Reaction Vessel Heating

    API and intermediate manufacturers employ the heat transfer fluid for precision-controlled heating of jacketed glass-lined, stainless steel, or Hastelloy reactors during synthesis by alkylation, esterification, and crystallization routes. Stable and accurate temperature ramping limits risk of product impurity formation, maximizes batch reproducibility, and complies with strict pharma GMP guidelines.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    4. Food Process Oil Heating Systems

    Food processors rely on the fluid in indirect heating units for edible oil deodorization, frying, and spray-drying applications where direct flame exposure risks product quality and safety. Stable and odorless operation prevents oil oxidation and meets international food contact material regulations for equipment and ancillary fluids in non-contact positions.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    5. Chemical Process Plant Distillation and Reactors

    Chemical manufacturers use the heat transfer fluid in reboilers, columns, and reaction vessels to provide consistent, high-temperature operation particularly for solvent recovery, fractionation, and fine chemical synthesis. Reliable temperature control secures batch uniformity, increases throughput, and reduces off-spec recycling across high-value product lines.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    6. Solar Thermal Energy and Concentrated Solar Power (CSP)

    Solar power operations use the heat transfer fluid in parabolic trough, power tower, and other CSP systems where stable, high-temperature operation ensures efficient heat capture and transfer through heat exchangers or thermal storage units. The fluid’s resistance to oxidation and thermal decomposition extends system lifetime, supporting sustainable energy targets and grid load management.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    Free Quote

    Competitive DOWTHERM Heat Transfer Fluid J prices that fit your budget—flexible terms and customized quotes for every order.

    For samples, pricing, or more information, please contact us at +8615365186327 or mail to sales3@ascent-chem.com.

    We will respond to you as soon as possible.

    Tel: +8615365186327

    Email: sales3@ascent-chem.com

    Inquiry

    Get Free Quote of Dow Inc

    Flexible payment, competitive price, premium service - Inquire now!

    Certification & Compliance
    More Introduction

    DOWTHERM Heat Transfer Fluid J: Performance You Can Trust

    Performance at Scale: The Everyday Value of DOWTHERM J

    From our perspective on the production floor, reliability in every drum of DOWTHERM Heat Transfer Fluid J isn’t just a promise—it's an opportunity to help our partners in manufacturing, chemical processing, and heavy industry operate their systems with fewer headaches. Over the years, we’ve worked with hundreds of plants, and one lesson has always held true: system downtime due to fluid breakdown translates into missed deadlines, lost revenue, and complicated clean-up. Selecting the right heat transfer fluid isn’t about ticking boxes on a data sheet—it’s about choosing a product that delivers predictable results in the real world, year after year, run after run.

    Our DOWTHERM J isn’t just another hydrocarbon blend. Drawing from hands-on experience during pilot runs and full-scale launches, we’ve seen that it’s the consistency you can feel in the equipment: pump casings stay clean, control instrumentation responds evenly, and you can squeeze more hours between scheduled fluid changeouts. The formulation—mostly alkylaromatic hydrocarbon—demonstrates a wide liquid phase operating range, holding up from about -80°C to above 300°C. This means you heat up reactors, distillation columns, or jacketed vessels with fewer worries about sudden viscosity changes or oxidation byproducts clinging to pipe walls. Our operations team watches every batch reach its demanding purity level, and frequent sampling ensures fluid properties don’t drift over long transport distances.

    Why Fluid Choice Matters to Process Stability

    Fluid breakdown is a common nightmare in continuous production. We've spent countless nights tracking system flushes, burned-out pumps, and fouled heat exchangers at sites using generic or off-spec fluids. Choosing DOWTHERM J means less time spent cleaning out sludge and coking deposits—an advantage that comes from the base chemistry. Oxidative stability, thermal resistance, and low volatility all work together, letting operators get more uptime per maintenance cycle. In our own repair shops, we’ve seen exactly how this pays off: heat exchanger tubes last longer before they need descaling, and filter banks don’t clog up nearly as fast.

    Downtime from fluid failure isn’t just costly—it’s a safety risk. Equipment running at high temperatures needs every safeguard working as designed. With DOWTHERM J, less oxidation means lower acid formation and fewer corrosion-related emergency repairs. Control rooms run smoother, operators trust their readings, and you spend less time chasing fluctuations in thermal performance. Our quality assurance process catches variances long before drums leave the site, so plant managers can focus on throughput, not troubleshooting.

    Productivity Under Extreme Conditions

    What sets DOWTHERM J apart in our eyes isn’t just thermal range, but repeatability. We’ve worked with clients from the Arctic Circle down to desert environments. Where some fluids turn sluggish in the cold or throw off vapors once temperatures spike, DOWTHERM J sticks to its curve. That flexibility is the difference between shutting down a line overnight and hitting shift change without unscheduled stoppages. The low pour point prevents gelling during winter turnarounds, so process lines can be cycled up quickly after maintenance. On the hot end, it resists thermal cracking, keeping its structure and performance even after hundreds of heating cycles.

    In the lab, our technicians put every batch through high-temperature stress testing. The fluid holds its own against flash vaporization and retains predictable viscosity at both high and low ends. Operators notice the difference on start-up mornings: valves open without stickiness, pumps hit their specs, and nobody ends up scrambling for supplemental heating. Between jobsite reports and data from our own accelerated life-cycle trials, we see steady performance that stands up to the harshest real-world conditions.

    Side-by-Side with Other Heat Transfer Fluids

    We regularly hear from partners switching from mineral oils or synthetic aromatic blends, frustrated by rapid aging or volatile losses. DOWTHERM J outpaces typical mineral-based fluids in several key ways. Its higher thermal stability at elevated temperatures means slower degradation and less top-off required. By comparison, mineral oils start to darken and break down after a few months, pushing process engineers to schedule extra cleanings. Synthetics offer decent stability, but the cost per barrel and lower thermal conductivities sometimes cut into margins, especially in large-scale operations.

    What we see in plant audits is that DOWTHERM J delivers a better heat transfer coefficient over time. Fouling rates stay manageable, so systems run closer to design efficiency for longer spans between overhauls. The low vapor pressure gives plant engineers confidence at higher operating temperatures—vent losses drop, and tank vent collection systems don’t get overloaded. While some alternatives surface as “compatible” on paper, long-term operators report that switching to DOWTHERM J can cut maintenance labor costs and boost output, especially in high-temperature loops.

    Longevity Builds Cost-Effectiveness

    Longevity in harsh process environments forms a big part of any fluid’s appeal. Over years of site visits and technical troubleshooting, our engineering group has found that DOWTHERM J’s oxidation resistance pays off most in closed-loop, non-vented systems. The reduction in byproduct formation reduces the need for unplanned shutdowns and mid-cycle filter changeouts. High resistance to hydrolytic breakdown—especially important for systems exposed to traces of moisture—means sludge doesn’t creep up on plant operators after seasonal weather changes.

    We’ve tracked usage reports from high-throughput plastics and resins plants, where fluid turnover can become a recurring cost headache. Many firms running DOWTHERM J can wait until scheduled turnaround seasons before draining lines and refilling. The fluid’s stable viscosity helps automated control systems stay dialed in without frequent recalibration. On the balance sheet, the lower frequency of top-ups and less spent on filter replacements flow straight to the bottom line.

    Precision-Made Product Every Batch

    Every liter of DOWTHERM J we produce gets tested against a spec tighter than what many local codes demand. Years in the field have convinced us this extra care pays off—no one wants to lose a week of operation because of off-spec or poorly matched fluid. We've invested heavily in online monitoring and laboratory verification, so no container leaves our site until density, moisture content, and volatility hit the sweet spot. In our experience, stable supply and consistent performance back every logistical promise we make. You get the same quality drum whether you draw 10,000 liters or a single barrel.

    With traceability built in, plant engineers get peace of mind knowing exactly what went into their tanks and when. Someone always asks if we support lot-specific performance data. Our answer: every batch, archived for years, is always accessible; repeat testing on retained samples demonstrates consistency over time. It’s not just about regulatory compliance—it’s about real operational security for your process lines.

    System Planning Made Simpler

    Jobsite retrofits often involve existing piping, heaters, and instrumentation calibrated for other fluids. From firsthand retrofit experience, we’ve found DOWTHERM J slides into established systems smoothly thanks to its familiar density, low viscosity at startup temperatures, and reliable behavior during process transients. Less fuss equals quicker commissioning times, lowering project risk during critical go-live days. Where tanks or system layouts restrict options, DOWTHERM J’s manageable vapor pressure means existing containment units rarely need costly upgrades.

    Safety teams appreciate the fluid’s low acute toxicity and balanced fire point—both attributes that simplify training and emergency procedures. Liquid handling protocols don’t require exotic materials, which helps operators stick to routines and meet local environmental standards. From our observations, plants switching to DOWTHERM J have no trouble integrating it into existing safety and environmental management systems.

    Applications Across Industries

    We’ve seen DOWTHERM J thrive across a range of heavy-duty fields. In plastics extrusion and polymerization, fluid stability protects final product quality from swings in reactor temperature. Datas from client operations confirm fewer off-spec batches and better consistency in melt processes. In the food and beverage sector, the fluid’s resistance to chemical breakdown ensures that flavors or aromas don’t pick up off-odors, as can happen with lower-quality fluids. Batch cooking, sterilization, and pasteurization systems benefit from the rapid response and wide temperature window.

    Across electronics manufacturing, pharmaceutical synthesis, and bulk chemical production, engineers tell us the same story: after switching to DOWTHERM J, temperature swings decrease, quality improves, and operators spend less time tracking down leaks or blocked lines caused by degraded fluid. The same qualities—predictable thermal expansion, low fouling rates, and simple compatibility with a variety of metals—mean it fits into both mature facilities and greenfield builds expanding for larger throughput.

    Supporting a Lower Environmental Impact

    Environmental responsibility isn’t just a buzzword to us. We’ve put our own waste handling processes under scrutiny, reducing residual waste volumes by reclaiming and recycling spent DOWTHERM fluids. In closed systems, DOWTHERM J’s slow degradation rate helps extend intervals between replacement, so less new fluid is used over time. Unlike some halogenated or silicone-based alternatives, DOWTHERM J leaves fewer persistent residues, making it easier to manage end-of-life disposal safely and economically.

    Our in-house recycling protocol ensures maximum recovery for spent fluids, matching tightening environmental regulations worldwide. We also assist partner plants in designing return and recycling programs that reclaim useful product, keeping costs and environmental impact down. Technicians who have managed full-facility fluid changeouts often remark on the ease of cleanup and minimal residue left behind by DOWTHERM J, especially when compared to heavily cracked oils or mixed-base synthetics.

    Speed of Support and Real-World Problem Solving

    Over decades, we’ve learned that rapid, knowledgeable support makes a difference when line issues crop up or fluid properties begin shifting out of spec. Clients value the depth of troubleshooting advice we provide—everything from thermal system modeling to quick fluid analysis on site. Unlike third-party sellers, our tech teams have hands-on experience with the product from synthesis through real-world deployment, so guidance measures up in the toughest situations.

    Early detection of problems matters. We frequently run seminars for plant managers on signs of oxidative stress in heat transfer fluids, how to minimize leaks, and keep system pressures safe. Regular client labs send samples for testing, but we also conduct onsite walk-downs, checking for fluid compatibility, leaks, or signs of equipment wear that might signal impending system failures. This boots-on-the-ground experience helps keep client operations resilient and ready for changing production demands.

    Troubleshooting and System Optimization

    Fluid doesn't last forever—not even ours. But with the right monitoring and support, DOWTHERM J outperforms less robust fluids. Plant operators can identify early warning signs: color changes, sharp odor increases, or shifts in pressure drop across heat exchangers. Our technical team consults with plant staff, reviewing fluid histories and recommending maintenance actions based on hard data, not guesswork. With years partnering on root cause investigations, we’ve seen how even minor process tweaks—like better purge procedures or improved tank venting—help DOWTHERM J last even longer.

    For system designers, working with a consistent fluid profile makes calibration, expansion, and reconfiguration much less stressful. Standards-based architecture means control systems can accurately track temperatures, flow rates, and pressure—cutting down on manual adjustments and human error.

    Clear Answers to Industry Demands

    At the end of the day, DOWTHERM J offers the kind of steady, measurable performance that gets noticed at the end of each maintenance cycle. Feedback from long-term users shows fewer system failures from fluid breakdown, making operations teams more confident when increasing throughput or adding new production lines. In a climate of shrinking maintenance budgets and rising energy costs, a heat transfer fluid with proven longevity and low fouling rates gives our customers a stronger position.

    Reliability, safety, and long life define the standard we set for our own teams and for everyone who relies on DOWTHERM J. Every step, from selection of raw materials to delivery, gets managed by a crew that understands the stakes. We keep learning from clients tackling new technical challenges—whether it’s squeezing more cycles out of a set of filters, improving yield on a new process run, or hitting tough new emissions limits without big capital investments. Our vantage point is unique: we don’t just ship barrels, we work to make sure every drop lives up to its promise.