| HS Code | 735981 |
| Chemical Name | Dipropylene Glycol n-Propyl Ether |
| Cas Number | 29911-27-1 |
| Empirical Formula | C9H20O3 |
| Molecular Weight | 176.25 g/mol |
| Appearance | Clear, colorless liquid |
| Odor | Mild, ether-like |
| Boiling Point | 230°C |
| Flash Point | 99°C (Closed cup) |
| Density | 0.92 g/cm³ at 20°C |
| Solubility In Water | Miscible |
| Vapor Pressure | 0.15 mmHg at 20°C |
| Viscosity | 3.8 mPa.s at 25°C |
| Autoignition Temperature | 309°C |
| Refractive Index | 1.418 at 20°C |
| Surface Tension | 29.2 mN/m at 20°C |
As an accredited DOWANOL Glycol Ether Solvent DPNP factory, we enforce strict quality protocols—every batch undergoes rigorous testing to ensure consistent efficacy and safety standards.
| Packing | DOWANOL Glycol Ether Solvent DPNP is packaged in a 200-liter blue steel drum with secure lid and product labeling. |
| Container Loading (20′ FCL) | Container Loading (20′ FCL) for DOWANOL Glycol Ether Solvent DPNP: typically 16–17 metric tons, packed in 160–170 x 200-liter drums. |
| Shipping | DOWANOL Glycol Ether Solvent DPNP is shipped in tightly sealed, corrosion-resistant containers to prevent leakage and contamination. It should be stored and transported in a cool, well-ventilated area, away from sources of ignition. Proper labeling, hazard communication, and compliance with local, national, and international transport regulations are mandatory. |
| Storage | DOWANOL Glycol Ether Solvent DPNP should be stored in tightly closed containers in a cool, dry, well-ventilated area away from sources of ignition, heat, and incompatible materials such as strong acids and oxidizers. Protect from direct sunlight. Store at temperatures below 40°C. Ensure containers are labeled properly and grounded to prevent static discharge. Always consult the Safety Data Sheet (SDS) for detailed guidance. |
| Shelf Life | DOWANOL Glycol Ether Solvent DPNP has a typical shelf life of 24 months when stored unopened in recommended conditions. |
As the direct manufacturer, we supply DOWANOL Glycol Ether Solvent DPNP for advanced industrial processes across coatings, inks, cleaning, and electronics sectors. Below, we detail its practical application in prominent, proven downstream segments, covering regulatory compliance, precise formulation parameters, integration points in production, and the end-use product types from each sector.
DPNP acts as a slow-evaporating co-solvent to optimize flow, leveling, and uniform pigment dispersion in the formulation of high-solids acrylic, alkyd, and polyurethane coatings for industrial equipment. Coatings formulators rely on its low volatility and controlled solvency to extend open time, minimize brush marks, and support critical film properties, especially in demanding corrosion-resistant industrial finishes. The solvent is charged in the grind or letdown stages, depending on pigment loading and viscosity adjustment needs.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Converters producing toluene-free packaging inks prefer DPNP for its high solvency in nitrocellulose and acrylic resin systems, its slow evaporation that supports viscosity stability on press, and minimal odor contribution. The solvent helps maintain print definition over long runs and assists in achieving uniform gloss and adhesion on composite structures like BOPP, PET, and aluminum foil. Technicians optimize dosage in the premix and letdown to balance drying speed with press throughput.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Within precision cleaning routines, semiconductor manufacturers use DPNP as an efficient carrier for flux, organic residue, and photoresist removal, especially in wafer and PCB lines where minimal ionic contamination is mandatory. The solvent’s high boiling point and excellent solvency for polar residues deliver residue-free surfaces critical for subsequent photolithography or coating. Inline batch and spray cleaning systems introduce DPNP post-soldering or pre-dicing.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Formulators for institutional and industrial hard surface cleaning agents employ DPNP to dissolve greasy and ink-based soils from metal, plastic, and glass surfaces. Its mild odor profile and efficacy in low-VOC blends make it suitable for professional kitchen degreasers and printer cleaning fluids. Technologists dose the solvent into detergent concentrates and ready-to-use blends after balancing with surfactants and alkalinity boosters.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
For waterborne decorative paint formulators seeking low-VOC, slow-evaporating coalescents, DPNP supports film formation and open time extension even at high humidity. Blended into latex acrylic and vinyl acrylic emulsions, the solvent modulates evaporation rate, reduces brush drag, and ensures crack-free drying. Dosing occurs at the final blend step to prevent early water loss and improper film development.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Competitive DOWANOL Glycol Ether Solvent DPNP prices that fit your budget—flexible terms and customized quotes for every order.
For samples, pricing, or more information, please contact us at +8615365186327 or mail to sales3@ascent-chem.com.
We will respond to you as soon as possible.
Tel: +8615365186327
Email: sales3@ascent-chem.com
Flexible payment, competitive price, premium service - Inquire now!
Walking through the plant, I get to see the realities behind each drum and tanker that leaves our gate. There’s always pride when describing DOWANOL Glycol Ether Solvent DPNP to our partners, not because marketing tells us so, but because we assemble each batch with careful attention. The full name is Dipropylene Glycol n-Propyl Ether, and it stands as a key member in our range of glycol ethers. Our teams monitor every step, knowing that consistency isn’t just a number on a spreadsheet; it’s about the customer who relies on that same quality in each delivery.
Years of hands-on experience have shown us just how diverse this solvent’s portfolio can be. Paint and coating experts drop by our labs to talk specifics, often comparing DPNP with more common glycol ethers like DPM (Dipropylene Glycol Monomethyl Ether) or DPnB (Dipropylene Glycol n-Butyl Ether). The features that catch their eye most are the higher boiling range and slower evaporation rate. These qualities bring clear advantages, like giving a paint film more open time, leading to a smoother finish with fewer brush marks and less chance of trapping bubbles.
DPNP’s behavior under heat is steady, so you see less curling or unwanted surprises as coatings dry. Formulators often need to stretch drying times without completely overhauling their recipes. DPNP answers that need because it offers a less volatile option compared to other glycol ethers. It doesn’t bite with odor, and it refuses to flash off too aggressively. The result is a product that fits in well with waterborne systems—an area growing every year as regulations change and performance bars get raised.
People in the industry long ago stopped thinking of solvents as one-size-fits-all. DPNP tends to be chosen when jobs demand both solvency power and control over drying time, rather than some generic “solvent function.” It doesn’t mask problems or hide rough patches, it gives the formulator a broader working window, especially valuable when working under variable environmental conditions.
Unlike lighter glycol ethers, DPNP doesn’t disappear before its work finishes. DPnB, which shares a similar structure, often tags along in conversations. DPnB has a slightly longer alkyl chain, making it a bit heavier on the solvency, but DPNP stands out as the better option whenever too rapid evaporation starts causing surface defects or introduces health and safety uncertainties. Technicians appreciate how DPNP provides enough strength to cut through stubborn resins while remaining gentle on critical properties like gloss retention and substrate adhesion.
Production teams know that product purity is not just academic; every batch carries the legacy of previous runs. Our systems focus on minimizing water and aldehyde content, which translates to predictable cure profiles and limits unwanted reactivity in downstream applications. Packaging gets thorough inspection for leaks and cross-contamination, because even trace residues muddy the performance downstream.
We’ve responded to feedback by tightening our GC (gas chromatography) methods, which pick up impurities that basic assays often miss. It’s a point of pride when customers mention how their batches behave exactly as expected, even after months in warehouse storage. This stability proves that attention to trace contaminants pays off outside the lab—on production lines, spray booths, and even automated mixing systems.
Our engineers make small but important adjustments in process timing and reflux ratios during distillation, especially for larger production lots. It’s easy to chase yield numbers. In reality, we’ve found that sacrificing a small percent of output to hit the right purity far outweighs the gains from cutting corners.
The story behind every drum of DPNP usually starts in paints and coatings, but the real journey goes much further. The demands in water-reducible enamels require a solvent that can balance the pigment dispersion without knocking out the system with unwanted foam or haze. DPNP flows into the matrix, helping pigment packages grind evenly without flocculation or color drift.
Industrial cleaners also rely on DPNP’s balance between strength and user-friendliness. In engine degreasers and machine maintenance fluids, you see operators who demand results but refuse to settle for harsh or high-hazard choices. DPNP finds its place bridging that gap, strong enough to dislodge grime and lubricant residues but compatible with a wide swath of polymers and elastomers in seals and gaskets. In textile auxiliaries, DPNP works its way into the fibers, carrying finishes and softeners without leaving residue that yellows or causes premature wear.
DPNP’s low toxicity and mild odor often attract users searching for a step away from higher VOC alternatives. Architects and contract finishers bring these advantages into high-traffic interior spaces, where lingering solvent smells risk tenant complaints and longer turnarounds. For those using water-based acrylics or urethane dispersions, DPNP keeps the system stable through storage and application, reducing the headaches of settling or skinning.
The numbers that show up in standard spec sheets—like boiling point, molecular weight, or flash point—have real meaning on the production floor. DPNP typically boils between 225–230°C, giving it a slow steady vaporization curve that stands apart from the quick-evaporating ethers in the same category. Viscosity measures low enough for efficient wetting, yet high enough so the product doesn’t behave like water in open tanks or during transfer.
Solubility presents a key talking point in customer meetings. DPNP mixes fully with both water and most organic solvents, which broadens its flexibility in multi-phase systems. Chemists appreciate its low volatility for open-batch processing. This property reduces exposure risk and makes vapor recovery easier, a genuine cost-saver on both the compliance and amortization side.
Our analytical teams routinely monitor lots for residual acidity, moisture content, and non-volatile matter. Even tiny shifts in pH can nudge the final application in unwanted directions. That’s why our lines run tests for ionic contamination every cycle—ensuring DPNP doesn’t interfere in catalyst operations, which play a big role in advanced resin systems requiring precision curing.
Manufacturers like us carry direct responsibility for the chemical’s journey from reactor to end user. In our view, that means attention to both personnel safety and the broader sustainability questions. DPNP avoids the acute toxicity and chronic health flags tied with older solvent classes. Over the last decade, markets have shifted away from chlorinated solvents, aromatics, and strong-smelling glycol ethers due to workplace hygiene regulations and growing user awareness.
Our teams monitor every loading, every valve, every bulk container for leaks or off-gassing. While DPNP’s relatively high flash point places it out of the high-risk categories, it doesn’t mean taking shortcuts on controls. Good handling and proper PPE stand as non-negotiables. Technicians in our blending plants share feedback that finds its way back to engineering—helping us spot small changes that improve process safety. For instance, introducing in-line monitoring for airborne vapor helps catch issues faster than manual spot checks.
Disposal and end-of-life treatment matter, too. DPNP’s biodegradability scores better than many petroleum distillates, but we take a closed-loop approach as much as possible, funneling recovered vapors and residues back into distillation. Operations staff are encouraged and rewarded for identifying sources of loss or emission before they swell into compliance issues.
We’ve watched as customers in Europe and North America push aggressively toward waterborne technology, and DPNP sales follow that trend. Formulators speak to tighter indoor air quality rules and a growing emphasis on worker comfort. DPNP lands in formulations that need to be tough during application but gentle enough post-cure, allowing the finished article to meet office, residential, and public space requirements.
Some years, supply chain turbulence makes raw material planning unpredictable. Our procurement team looks for stable supply from trusted glycol producers, vetting each batch for compliance and sustainability credentials. We’ve built redundancy by qualifying secondary vendors—not a step we take lightly, but one that now means we keep customers supplied during market swings.
We encourage feedback and spend time on the road visiting users. Real feedback doesn’t wait until the post-sales survey, it comes in late-night calls and line shutdowns. Field staff download this intelligence straight into our process improvement cycles, cutting out delays. In one case, a customer’s switch from DPnB to DPNP for a high-gloss floor finish revealed a gloss drop after six months. Our tech team ran a round of lab mimics, pinpointing a trace cross-contamination with diethylene glycol monoethyl ether from a supplier’s wash tank. We shared corrective steps across our vendor base, shoring up QA for all outgoing stock.
Solvent harmonization remains a recurring challenge. In water-based paints, balancing the evaporation profile with gloss, open time, and flow can feel like chasing a moving target. DPNP acts as a stabilizer in these blends, smoothing differences between resin and pigment packs. Yet every market brings new resin chemistries, and ratios keep shifting. Our technical advisers spend time matching DPNP levels to new dispersions, running stability and freeze-thaw tests before certifying new formulations.
Another case from an adhesives producer stands out. Their waterborne vinyl system suffered from stringing and gel formation at high ambient temperatures. They noticed a switch to DPNP extended the pot life during summer runs and eliminated the gelling. The adjustment allowed them to stretch production time, cut rework, and land contracts with buyers who demanded summer-proof adhesives. A lesson learned: performance in the lab rarely tells the whole story. Only through regular user dialogue and careful lot tracking does the full strength of DPNP manifest for tough users.
For industrial cleaners, the trend is moving to reduced VOC and safer handling with no sacrifice to degreasing power. DPNP balances these needs. In formulating industrial hand wipes, several partners replaced high-alcohol content blends with DPNP-driven systems, reducing skin irritation rates and lowering shipping hazard classes. These improvements ripple beyond the balance sheet: operators reported higher productivity, fewer medical complaints, and year-over-year retention of skilled staff.
Raw material variability tests our resolve. We track every incoming feedstock, running a blend of spectrometric and chromatographic profiles. Subtle differences in propylene oxide levels or minor glycol blends turn up over the course of the year. By linking lab results with drum-level production records, we keep tabs on which adjustments tweak batch-to-batch uniformity.
We log each equipment cleanout and validate against off-spec yields. It’s not glamorous work, but our crew knows unwashed lines feed into future customer complaints or off-smell issues down the line. Whenever a technical issue crops up in customer feedback, we pull in data from the entire batch record, from raw tank to finished tote. Years of traceability and open records mean solutions come faster, and lessons learned can be applied proactively.
During high-volume quarters, we invest in skills training. Line staff rotate through analytic labs, learning the ‘why’ behind each step, not just the ‘how’. It’s these investments that build a workforce capable of troubleshooting not just by the book, but with an understanding of the science behind DPNP production. Seeing the pride on a technician’s face when a customer praises consistency tells us these efforts add value beyond any audit or certification checklist.
The market for specialty glycol ethers keeps evolving. As stricter environmental regulations tighten controls on VOCs and hazardous air pollutants, DPNP’s place continues to grow. Years ago, paint shops tolerated stronger-smelling, high-evaporation options, favoring speed over safety. Those days are ending. Now, DPNP sits as an answer to strict compliance needs, indoor air targets, and the rise of green chemistry.
Our research team collaborates with partners across sectors, from electronics coatings to agrochemical carriers. DPNP often plays a hidden role in improving processability or extending shelf life. In digital inkjet printing, for example, reliable solvent performance under a wide range of humidity and temperature cycles can make or break a print job.
We continue studying alternative feedstocks, looking for lower-carbon synthesis routes for DPNP that don’t give up performance or affordability. This includes exploring bio-based glycol sources and refining catalysts that shave energy off each production run. These steps take time, but perseverance produces gains that pay off not just for us, but for every customer working to meet climate and regulatory targets.
Every barrel, tank, and pallet of DOWANOL Glycol Ether Solvent DPNP carries the work of dozens of skilled hands and attentive eyes. Whether our product ends up in high-performance coatings, low-odor industrial cleaners, or advanced functional resins, it reflects both innovation and a commitment to long-term relationships with formulators and end users. In a marketplace crowded with choices, it’s long-term reliability and responsive manufacturing that let DPNP stand apart. From factory floor to customer site, those of us behind the scenes carry that responsibility forward, adapting every day as new application challenges and regulatory environments unfold.