| HS Code | 682949 |
| Chemical Name | 2-Butoxyethanol |
| Cas Number | 111-76-2 |
| Molecular Formula | C6H14O2 |
| Molecular Weight | 118.17 g/mol |
| Appearance | Clear, colorless liquid |
| Odor | Mild, ether-like |
| Boiling Point | 171°C |
| Flash Point | 60°C (closed cup) |
| Density | 0.900 g/cm3 at 20°C |
| Solubility In Water | Miscible |
| Vapor Pressure | 0.6 mmHg at 20°C |
| Autoignition Temperature | 230°C |
| Melting Point | -77°C |
| Viscosity | 3.3 cP at 25°C |
| Refractive Index | 1.419 at 20°C |
As an accredited CELLOSOLVE Glycol Ether Solvent EB factory, we enforce strict quality protocols—every batch undergoes rigorous testing to ensure consistent efficacy and safety standards.
| Packing | CELLOSOLVE Glycol Ether Solvent EB is packaged in a 200-liter blue steel drum with secure closure and clear hazard labeling. |
| Container Loading (20′ FCL) | A 20′ FCL can typically load about 80 drums (200 liters each) of CELLOSOLVE Glycol Ether Solvent EB securely. |
| Shipping | **CELLOSOLVE Glycol Ether Solvent EB** is typically shipped in tightly sealed steel drums or bulk containers to prevent leakage and evaporation. Shipments comply with regulations for hazardous materials, including labeling and documentation. Storage and transport require cool, well-ventilated areas, away from ignition sources. Ensure proper handling practices and use of personal protective equipment. |
| Storage | CELLOSOLVE Glycol Ether Solvent EB should be stored in tightly closed containers in a cool, dry, well-ventilated area away from sources of ignition, heat, and incompatible materials such as strong acids and oxidizers. Keep away from direct sunlight and moisture. Ensure proper labeling on containers and take precautions to avoid static discharge and vapors accumulation. Follow all regulatory guidelines for safe handling and storage. |
| Shelf Life | CELLOSOLVE Glycol Ether Solvent EB typically has a shelf life of 2 years when stored in tightly sealed, original containers. |
We manufacture CELLOSOLVE Glycol Ether Solvent EB specifically for downstream industries that require precise solubility, controlled volatility, and stable performance in complex formulations. Below, we detail its principal industrial application areas, addressing compliance standards, accurate formulation guidance, downstream integration points, and representative end products for each sector.
Our solvent is widely used in the production of high-performance waterborne coatings, enabling formulators to achieve efficient film formation, controlled open time, and reduced surface defects. The raw material provides consistent solvency for acrylic, epoxy, and alkyd systems, contributing to the finished coating’s gloss and leveling characteristics while supporting compliance with environmental regulations.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Our solvent’s high efficiency in dissolving hydrophobic soils and its compatibility with surfactant systems make it a preferred co-solvent for professional and retail cleaning formulations. It serves industrial blending operations requiring effective grease and ink removal capacity with controlled odor profiles and low residue, essential for formulation transparency and regulatory compliance.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Our glycol ether solvent provides ink formulators with the required balance of drying rate and pigment compatibility needed for modern flexographic and gravure ink systems. Its excellent solvency for resins and dyes sustains fluidity during storage and use, while supporting high print resolution essential for packaging, labels, and specialty graphics.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
We provide glycol ether for use as a carrier and leveling agent in synthetic and blended fiber dyeing operations. Its miscibility supports uniform dye uptake in polyester, acetate, and acrylic processes, reducing streaks and improving the penetration and fastness properties of dyes under batch and continuous finishing lines.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Our solvent finds established use in the dilution and emulsification of specific herbicide and insecticide actives. It ensures stable emulsions and uniform spray distribution for field application, playing a vital role in tank-mix compatibility and minimizing phase separation in both concentrate and ready-to-use agrochemical products.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Competitive CELLOSOLVE Glycol Ether Solvent EB prices that fit your budget—flexible terms and customized quotes for every order.
For samples, pricing, or more information, please contact us at +8615365186327 or mail to sales3@ascent-chem.com.
We will respond to you as soon as possible.
Tel: +8615365186327
Email: sales3@ascent-chem.com
Flexible payment, competitive price, premium service - Inquire now!
Our facility has been producing CELLOSOLVE Glycol Ether Solvent EB (2-butoxyethanol, ethylene glycol monobutyl ether) for decades. Over those years, we have stood firmly in the reality of large-scale production work—handling raw materials, optimizing distillation columns, troubleshooting variability—because reliable supply and consistent performance matter more than glossy brochures or buzzwords. CELLOSOLVE EB isn’t a new name to seasoned professionals in coatings, industrial cleaners, inks, and chemical processing. Many in the industry already know its sharp balance between solvency, volatility, toxicity management, and seamless formulation. That understanding comes from boots on the ground, both on our plant floors and in our customers’ applications.
CELLOSOLVE EB belongs to the family of glycol ethers, sitting as a single-component, clear liquid with a mild, pleasant odor. The chemical formula—C6H14O2—directly connects to its structure: a numbered carbon chain with an oxygen atom bridging an ethylene and a butyl group. Its technical grade typically maintains a minimum purity exceeding 99 percent, and our processes focus on removing trace impurities like ethylene glycol or higher glycol ethers. We see technicians checking refractive indices and water content daily, because a small drift in raw material feed conditions can sneak through into the final product if our vigilance slips. What ends up in every drum leaving our loading dock comes from a steady set of production controls—real humans monitoring their craft, not just automated sensors and batch records.
CELLOSOLVE EB’s performance shows how the basic science plays out in real-world manufacturing and usage. Its moderate boiling point sits around 171°C, offering a useful evaporation rate for open applications like paint and coating drying, but not flashing off before the film sets or leaving excessive residue on the line. Its full miscibility with water and a broad selection of hydrophobic solvents makes it a chemical bridge—lifting resins, pigments, and even greasy soils out of their oil-based limits. We watch painters, ink manufacturers, and floor finish specialists opt for EB over straight alcohols when they need a solvent that delivers both power and subtlety.
Our engineers appreciate its surface tension and viscosity, which allow wetting out of most surfaces without puddling and without the flow control headaches common with faster-evaporating or more viscous alternatives. Where other solvents either streak, bead, or flash-dry, CELLOSOLVE EB really soaks, cleans, and lifts—minimal residue, easy to rinse or wipe off, and flexible in blending.
Certain glycol ethers—like propylene glycol ethers—offer lower toxicity profiles or marginally higher flame resistance, but end-users often find that nothing surpasses the performance balance handed down by CELLOSOLVE EB. In architectural and industrial coatings, its medium evaporation rate keeps ‘open time’ under control while helping resins settle smoothly on wood, metal, plastics, and mineral surfaces. Formulators blending waterborne latexes with CELLOSOLVE EB see improved pigment wetting and longer workable times, not just a generic “solvency” box ticked on a formulation sheet.
Compared to less costly alcohols and ketones, EB allows formulators to cut down on surfactants or co-solvents. That means fewer ingredients—translating into streamlined inventory, simpler hazard assessments, and lower batch-to-batch variation. There’s a comfort in opening a new drum and seeing the liquid just as clear and uniform as the last one; our operators take pride in providing exactly that.
Some regulatory trends challenge glycol ethers as a class—pushing for lower workplace exposure. We have invested in vapor recovery systems, automated filling lines, and leak-proof drum closures. Real safety starts on our plant floor long before a product reaches a worker’s hands. Risk evaluation and worker training shape how we handle, process, and ship every liter, with personal exposure controls set up well below published limits.
Coatings and paint manufacturers value CELLOSOLVE EB for its dual affinities. Oil-based and latex paints, especially those facing tricky application conditions like high humidity or cool temperatures, rely on EB to maintain flow and leveling during drying. In wood finishing, our clients report fewer blush marks and a glassier, more even varnish surface. When switching from ethanol or isopropanol, painters describe better pigment suspension and higher color development—measurable in lab tests, but noticeable just by eye and hand. Manufacturers have found that paints and stains fortified with this glycol ether resist water spotting and can be sanded, recoated, or cleaned up faster than competing blends.
In cleaner and degreaser formulations, customers need a glycol ether able to punch through oily or greasy soils—engine blocks, machine housings, foodservice equipment. Here, CELLOSOLVE EB runs rings around simple alcohols and light hydrocarbon solvents, dissolving sticky residues without requiring excess manual agitation. We have watched major maintenance shops slash the time needed for soak-downs and wipe-offs, even as they move away from older chlorinated solvents. As one plant manager put it, “we spend less time scrubbing and more time making product.” For institutional cleaning, laundry pre-spotters, hard surface sprays, and metal degreasers, the switch to EB has meant a sharp drop in complaints about strong odors, irritation, or lingering “ghost stains.”
Printing ink producers face another set of challenges. In fast-drying flexo and gravure lines, ink must wet nonporous substrates, lay flat, and avoid piling or smudging during the print run. CELLOSOLVE EB helps ink films flow during application, but it sits long enough to allow resolution to hold and color to pop. Printers flipping between different packaging materials or seeking environmentally adapted formulations ask for EB time and again because it doesn’t gum up presses, nor does it leave behind clumps or rings that short-run solvents often do. Print shops also report fewer detackification issues—no sticking rollers, no sticky hands, just a steady press run.
Industrial intermediates use EB in esterification, etherification, and as a building block for custom chemical syntheses. Our partners blending surfactants, plasticizers, and agricultural adjuvants depend on the same purity and consistent reactivity we maintain for finished product blends. We believe a chemical is only as trustworthy as its repeatability in a reaction vessel—bench trials matching tank farm deliveries, shift after shift. CELLOSOLVE EB passes that test at scales from small pilot reactors up to railcar shipments.
Our customers demand more than “on-spec” paperwork or broad-batch quality claims. They want assurance that the drum or tote received matches their process requirements without surprise. As a primary chemical manufacturer, every batch receives hands-on and instrument-driven verification: gas chromatography for purity, Karl Fischer titration for water content, odor checks, trace metals, even haze under different lighting conditions. Incoming butanol streams receive tighter controls; ethylene oxide transfer systems operate under pressurized closed loops, all to lock in purity and minimize byproducts.
We field calls from end-users when a drum sourced from a gray-market trader causes haze in a clear coating, or when an alternative supplier’s EB leaves films sticky after drying. Some brokers offer CELLOSOLVE EB with uncertain provenance, fluctuating specs, and unknown history. Our operations give customers full batch traceability back to raw material receipt, production conditions, and outbound shipment records. We keep technical teams available to discuss compatibility, process tweaks, and troubleshooting—real solutions, not generic FAQs. Customers speak directly to the chemical’s origin, seeing months and years of reliable performance, not just a spot-market price or mixed-lot inventory.
We invest in regular equipment upgrades—continuous column distillation, advanced filtration, digital monitoring systems for even tighter product qualification. Down to our packaging crews, we train operators to identify off-color, off-odor, or leaking containers, stopping issues before they leave the facility gate. Our goal remains simple: deliver CELLOSOLVE EB as it’s really needed, every time, with no unexpected variables in the mix.
CELLOSOLVE EB finds itself at the crossroads of regulatory assessment. Countries set workplace controls for glycol ethers given their ability to absorb through skin and enter the bloodstream. That doesn’t make the product hazardous in itself, but using it safely requires thoughtful exposure controls, training, and solid workplace ventilation. Our plants invest in full vapor-recovery and monitoring equipment for drum filling, and we work directly with customers to keep their own handling procedures current.
We watch trends: paint makers targeting ever-lower VOCs, cleaners seeking “greener” alternatives, states looking to list glycol ethers on right-to-know statutes. What matters is supplying trusted product documentation, real-world exposure data, and partnering with users for practical engineering controls. Most workplace exposures in downstream uses register far below published occupational limits if local exhaust and safe handling are in place. As manufacturers, we view safety not as a product feature, but as a collaborative process from plant to end-user, grounded in real data, on-site visits, and shared learning from experience on the shop floor.
Emerging alternatives in cleaning—so-called “green” glycol ethers and bio-based solvents—see a lot of attention in industry magazines. Some of these new chemistries perform well in limited tests but come with their own drawbacks: non-uniform supply chains, unfamiliar hazard profiles, or inconsistent behavior under actual process conditions. We’ve seen switches away from CELLOSOLVE EB that forced expensive reformulations or led to failures in performance. Choosing a solvent goes far beyond technical specification—manufacturers, plant managers, and workers want to eliminate variables, not multiply them without evidence.
Our operational staff see trends shift with regulatory and supply chain changes, yet the backbone of chemical manufacturing doesn’t change. Plant managers hate surprises—especially when a newly qualified batch clogs filters, forms two phases, or just won’t deliver the results a customer built a product line around. Chemical suppliers who blend and rebottle are prone to shortcuts; direct manufacturers pick up the phone when there’s a challenge. We have seen entire railcar lots held and retested after field complaints, not as an afterthought, but because reputation—and real safety—trumps short-run profit.
Quality isn’t a word to us; it’s the feeling of seeing a formulation work as planned, the sound of expert operators publicly noting a shift went well, the call from a repeat customer who says, “your last lot did exactly what we needed.” Differences between CELLOSOLVE EB supplied by manufacturers like us versus brokered lots go beyond numbers on a spec sheet. Off-grade material causes plant delays, lost batches, compliance headaches—and those compounding costs add up across a fiscal year.
Many of our customers shape their own best practices based on direct, repeated feedback. The more data we gather and share, the more predictable the outcomes for a painter, coatings scientist, or maintenance supervisor. We never chase after fast-moving trends unless the application science supports them. CELLOSOLVE EB’s decades-long track record is built on millions of field hours—failures and successes. That’s why we maintain deep relationships, open technical hotlines, and transparent supply chain reporting.
Every application brings its own quirks. We’ve seen customers ask about switching entirely from glycol ethers to bio-based esters or hydrocarbon blends, only to return because alternatives produced haze, lost gloss, or just wouldn’t clean like CELLOSOLVE EB. In latex paints, our field reps have traced consumer complaints about drag marks or poor adhesion back to small changes in glycol ether content—evidence for how sensitive even mature formulations remain to ingredient quality.
Large coating operations, high-speed print shops, and national cleaning product labels have told us that a stable, reliable CELLOSOLVE EB supply underpins their product consistency. New chemistries can supplement specific use cases, but few deliver the all-around performance across cleaning, blending, solubilizing, and film forming that CELLOSOLVE EB offers. Our perspective has always been practical: understand the chemistry, control your processes, support your partners. That leads to fewer headaches and higher productivity.
We encourage all end-users—engineers, lab techs, formulators—to connect with their supplier’s technical teams. Solvent properties don’t shift, but the art of using them in real-world settings continues to evolve. We spend time on customer lines, watch their process steps, offer on-site troubleshooting, and adjust supply logistics to match seasonal or regulatory changes. Our role as manufacturer isn’t just pushing a product; it’s enabling downstream quality and efficiency, batch after batch, job after job.
CELLOSOLVE Glycol Ether Solvent EB earned its place on the plant floor, in the blending vessel, and on the production line because its combination of strong solvency, precise evaporation rate, and clear blending offers something generic alternatives rarely match. The work doesn’t end with shipping a drum—it happens in constant monitoring, problem-solving for real customers, and investment in plant equipment and staff training. Our production teams stay focused on keeping every shipment up to every standard, with full transparency and no hidden trade-offs. Switching to lower quality or uncontrolled EB brings risk; relying on proven, primary-manufactured CELLOSOLVE EB keeps operations running smoothly, safely, and with a record of successful outcomes backed by true, hands-on industrial experience.
Plants running CELLOSOLVE EB for coatings, cleaners, and specialty synthesis tasks know the difference after even a week of real use. “Just another glycol ether” doesn’t fly with our clients or our staff. We build long-term partnerships through technical expertise, reliable supply, proactive compliance support, and the lived lessons of chemical operations day after day. Successful manufacturing demands more than formulas and labels—it takes consistency, communication, and the pride that comes from providing chemicals that support hundreds of essential products worldwide.