| HS Code | 934994 |
| Product Name | XIAMETER Silicone Fluid (Dimethicone) PMX-200 100 cSt |
| Chemical Name | Polydimethylsiloxane |
| Appearance | Clear, colorless liquid |
| Viscosity | 100 cSt at 25°C |
| Specific Gravity | 0.963 at 25°C |
| Refractive Index | 1.403 at 25°C |
| Flash Point | >300°C (closed cup) |
| Boiling Point | >200°C |
| Pour Point | -50°C |
| Solubility In Water | Insoluble |
| Surface Tension | 21 mN/m at 25°C |
| Odor | Odorless |
As an accredited XIAMETER Silicone Fluid (Dimethicone) PMX-200 100 cSt factory, we enforce strict quality protocols—every batch undergoes rigorous testing to ensure consistent efficacy and safety standards.
| Packing | The packaging for XIAMETER Silicone Fluid PMX-200 100 cSt is a 20-kilogram blue plastic drum with a secure screw cap. |
| Container Loading (20′ FCL) | 20′ FCL can load approx. 80 × 200kg drums (16 MT) of XIAMETER Silicone Fluid (Dimethicone) PMX-200 100 cSt. |
| Shipping | Shipping for **XIAMETER Silicone Fluid (Dimethicone) PMX-200 100 cSt** is typically done in sealed, durable containers such as drums or pails to prevent contamination and leakage. The chemical is classified as non-hazardous, but should be shipped according to local, national, and international regulations. Proper labeling and documentation are required. |
| Storage | Store XIAMETER™ Silicone Fluid (Dimethicone) PMX-200 100 cSt in tightly sealed containers, in a cool, dry, and well-ventilated area away from heat sources, sparks, and direct sunlight. Avoid storage near oxidizing agents. Keep containers upright and protected from physical damage. Follow local regulations and the product’s Safety Data Sheet (SDS) for safe storage and handling instructions. |
| Shelf Life | XIAMETER Silicone Fluid PMX-200 100 cSt has a shelf life of 36 months from the date of manufacture when unopened. |
XIAMETER Silicone Fluid (Dimethicone) PMX-200 100 cSt serves as a specialty ingredient in a variety of industrial sectors that require controlled surface properties, lubrication, and processing reliability. The following sections outline the primary downstream uses within actual manufacturing environments.
Formulators in the skincare and haircare industries incorporate XIAMETER Silicone Fluid (Dimethicone) PMX-200 100 cSt to achieve a non-greasy, silky texture in lotions, creams, and conditioners. Manufacturers depend on its high purity to meet regulatory demands for skin-contact applications. The product enables precise control of spreadability, long-lasting film formation, and water resistance in cosmetics, with specific batch-to-batch consistency required for branded goods.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Molders of thermoplastics, elastomers, and specialty rubbers use this silicone fluid as a non-reactive, temperature-stable release agent. Its chemical inertness prevents physical sticking and residue buildup on mold surfaces, reducing cycle times and lowering tool cleaning frequency. Technicians optimize prevention of product surface defects in automotive, footwear, and electronic component parts.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Textile producers dose XIAMETER Silicone Fluid (Dimethicone) PMX-200 100 cSt as a softener for cotton and synthetic fiber finishing. The polymer imparts a permanent hand feel, antistatic properties, and abrasion resistance to woven and nonwoven goods. Factories value its high shear stability during padding and exhaustion processes, allowing for reproducible batch performance across fashion, technical, and home textile lines.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Industrial lubricant producers integrate this silicone base fluid for its high viscosity index, oxidation stability, and inertness with metals and plastics. Maintenance operations in food processing, packaging, and precision assembly choose this grade for low-toxicity lubricants and polishing emulsions, requiring compatibility with regulatory food-contact and cleanroom standards.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Construction chemicals manufacturers employ this silicone fluid in aqueous or solvent-based water repellent systems to deliver durable hydrophobicity to mineral substrates. Field application on concrete, clay tiles, bricks, and stone improves long-term weathering and freeze-thaw stability, with chemical-entry points strictly controlled for environmental compliance and builder certification.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Producers of defoaming and antifoam agents use this linear silicone fluid as a key ingredient for rapid and extended foam suppression in aqueous and non-aqueous systems. Its low surface tension enables quick foam rupture and long-term control in pulp and paper, fermentation, and paint manufacturing environments where excessive foaming impedes throughput and quality.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Electrical insulation and component manufacturers utilize this silicone fluid as a dielectric medium in transformers, capacitors, and high-voltage equipment. Its thermal stability and low reactivity maintain insulation performance even under cyclic load conditions, ensuring product reliability in mission-critical applications. Producers integrate it to minimize corona discharge risk and thermal degradation in sensitive devices where downtime is unacceptable.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Competitive XIAMETER Silicone Fluid (Dimethicone) PMX-200 100 cSt prices that fit your budget—flexible terms and customized quotes for every order.
For samples, pricing, or more information, please contact us at +8615365186327 or mail to sales3@ascent-chem.com.
We will respond to you as soon as possible.
Tel: +8615365186327
Email: sales3@ascent-chem.com
Flexible payment, competitive price, premium service - Inquire now!
Building specialty silicones over the past few decades has given us a front-row seat to the changing needs of customers in industries like cosmetics, personal care, automotive, and even electronics. Day in and day out, we see the difference that a pure, high-quality silicone fluid makes—not only in how products function but in how they’re perceived and trusted by the end user. The XIAMETER Silicone Fluid PMX-200 100 cSt covers a unique niche in our catalog: a medium-viscosity, polydimethylsiloxane fluid designed for applications demanding a balanced approach between easy handling and reliable performance.
Clients often ask what makes the 100 centistoke grade so popular among formulators and fabricators. The answer is straightforward: this viscosity hits the sweet spot between flow and staying power, making it a favorite where smooth spreading is key but dripping and running create issues. The molecular structure delivers pourability and spreadability without thinning out or thickening unexpectedly. Every batch adheres to strict analytical methods, confirming density, refractive index, and viscosity year after year, which assures manufacturers that the performance in the lab translates directly to the shop floor.
Silicone chemistry offers exceptional thermal and chemical inertness. Decades of trialing have confirmed that XIAMETER PMX-200 100 cSt remains unchanged under prolonged exposure to temperatures common in blending tanks, filling lines, and production equipment. We’ve monitored batch samples held at elevated temperature and humidity for months, noting no significant degradation or yellowing. Low surface tension and low reactivity allow this silicone fluid to perform without influencing system pH or reacting with metal, glass, or polymer surfaces. That stability saves downtime and prevents costly surprises in full-scale production runs.
Manufacturers in personal care rely on dimethicone for its ability to impart slip and softness while resisting wash-off. The 100 cSt grade in particular gives lotions, antiperspirants, and hair serums a silky afterfeel while avoiding the weightiness of heavier fluids. Plenty of users in textile finishing, release agents, and automotive care select this grade to lubricate, provide water repellency, or protect surfaces from dust and grime. In processing, it resists shear degradation in high-speed mixers and stands up to repeated heating and cooling cycles, an absolute necessity for batch consistency.
We’ve seen the 100 cSt variety bring consistent results batch after batch in defoamer production. It disperses readily and acts as a stable anti-foam or air release agent in non-aqueous and some aqueous formulations. In molded rubber, it eases mold release, allowing for higher throughput and fewer rejects. Some of our long-term customers continue to use PMX-200 100 cSt in electrical assemblies, coating delicate switches, and protecting printed circuit boards due to its dielectric properties. The product works with many materials—from metals to plastics—without causing embrittlement or swelling, simplifying compatibility checks for engineers and formulators.
Our team values the direct feedback from line operators and formulators who share stories about failed experiments with lower-quality fluids—batch instability, poor texture, unexpected odors, or dull finish on surfaces that call for gloss. Robust quality control at every stage keeps lot-to-lot consistency, using methods like kinematic viscosity measurement and gas chromatography. Each drum and pail has a batch record tracing origin and confirming key characteristics, supporting traceability for those in regulated industries. That peace of mind allows manufacturers to produce at scale with confidence, minimizing testing and rework.
Safety stewardship has always been part of our development cycle. PMX-200 100 cSt carries a record of low volatility and minimal toxicity, so it’s widely designated as safe for topical use in regulated cosmetics and personal care. When handled using common industrial hygiene protocols—gloves, local exhaust, and clean work surfaces—workers report no allergic reactions, respiratory complaints, or performance decline in packaging equipment. These properties encourage use even in sensitive settings, such as food-handling conveyor belts and medical-grade cleaning products. We field regular questions surrounding regulatory changes, and our compliance team keeps certification current for key markets, including registration with major chemical inventories and quality standards.
Markets grow crowded with products touting similar grades and raw numbers, but our feedback and technical investigations show that not all silicone fluids labeled at 100 centistokes behave the same way. Some suppliers blend or stretch dimethicone with lower-cost substitutes to achieve a target viscosity. These substitutes may skew distillation curves, alter flash point, or introduce contaminants like cyclic siloxanes at levels that trigger regulatory concern or odors that lower product acceptance. Our process avoids those shortcuts: a controlled hydrolysis and polymerization yields a narrow molecular weight distribution, which means minimal volatility and absence of low-weight impurities.
Applications such as car polishes, hair care, and release coatings demand a combination of clarity, odorlessness, and clean skin or surface feel. Deviation in those aspects—even by a small margin—leads to visible streaks, tackiness, or product rejection. Engineers and scale-up chemists routinely point to PMX-200 100 cSt for its consistent clarity and total absence of residual catalysts and by-products measurable by state-of-the-art spectroscopic techniques. For comparison, grades at either end—like 50 cSt or 350 cSt—can behave unpredictably in emulsification, stability, or feel to the touch. Too thin, and the product runs or fails to deposit; too thick, and handling becomes sluggish, mixing with other ingredients becomes difficult, and the end product takes on unwanted weight.
We monitor reviews and post-market performance to help fine-tune the process, meeting customer standards for low volatility, excellent pourability, and minimal residue. Unlike some high-viscosity polydimethylsiloxane grades, which resist blending with non-silicone ingredients, XIAMETER PMX-200 100 cSt quickly disperses in a wide range of oils or solvents, shaving minutes off batch times and reducing operator intervention. Labs see real savings and fewer headaches switching to this grade because they spend less time recalibrating equipment and can standardize recipes across product lines. Several contract manufacturers report lower customer complaints since switching, attributing it to smoother texture and easier bottling.
Global regulation continually evolves, and manufacturers face tighter restrictions on low molecular weight siloxanes due to environmental scrutiny. EU and North American agencies pay close attention to D4, D5, and D6 contents due to their bioaccumulative potential. Our synthetic route and purification steps yield PMX-200 100 cSt with cyclic content below widely recognized thresholds, monitored using sensitive chromatography methods. Batches regularly test below the industry standard, reassuring downstream customers and regulatory auditors alike.
Sustainability concerns occupy a greater part of our R&D and customer conversations. Facilities now target energy savings and ways to reduce emissions by streamlining blending, filtration, and packaging steps. PMX-200 100 cSt simplifies this journey by working well in cold-blend systems, reducing or eliminating the need for heating tanks and pipes. In many plant trials, teams note lower energy use and less operator fatigue during processing days, thanks to easier material transfer and faster flush cycles. Material waste in bulk transfer has also gone down, with our drum and tote options designed to ensure full evacuation. Customers share real data: measurable savings on energy bills and less downtime for equipment maintenance.
Formulators come to us with a list of pain points: gumming up during blending, long mixing times, unwanted byproducts, or lingering odors. Several customers using alternate dimethicone grades struggled with incomplete mixing or separation during storage, requiring extra process steps or introducing cloudiness into final formulations. PMX-200 100 cSt, with its tightly controlled rheology, helps remove these bottlenecks. Blending into oils, waxes, and even low-polarity solvents allows it to fit into many product types from creams to sprays. A uniform pour at room temperature, coupled with predictable thinning under mild heat or agitation, turns out to be the practical advantage for scale-ups and legacy lines alike.
Another challenge surfaced in sprayable cleaners and polishes, where inconsistent atomization led to customer complaints about spitting or uneven application. Our product offered tighter reproducibility in spray systems, giving a finer, more controlled mist, cutting down on waste and customer call-backs. QA staff at a partner facility clocked a significant drop in rework as PMX-200 100 cSt maintained low residue levels in bottling equipment and left no deposits in fine mesh strainers.
In voltage insulation or electronic assembly, teams depend on the electrical properties of silicone fluids. Past customers moving to PMX-200 100 cSt reported fewer arc failures, improved surface wetting on PCBs, and a clear absence of conductive residues, especially after weathering or exposure to cleaning cycles. Field engineers have pushed the product through their internal accelerated aging tests—heat, UV, salt-fog—and documented no cracking, color changes, or surface tack, clearing another regulatory and performance hurdle.
Markets for silicone materials, especially the 100 cSt grade, never stop evolving. We work with customers in personal care who ask for formulas to boost the shine of a serum without leaving greasiness or promoting buildup. Partnering closely with their formulators, feedback cycles confirm that PMX-200 100 cSt gives the right balance of deposition on hair and skin, allowing active ingredients from other phases to reach the target site unimpeded. In household polishes, extensive comparative gloss measurements demonstrate superior finish on wood, vinyl, and coated furniture—most of which stems from the stability and clarity built into the fluid from the outset.
We routinely collaborate with R&D chemists tackling new problems such as anti-static sprays for electronics, lubricating agents for precision gears, or water-resistant coatings for textiles. Controlled experiments validate PMX-200 100 cSt as a truly non-staining, non-migrating solution in these roles, passing migration and stain resistance protocols that challenge lower-grade products. Some sectors adopt our fluid as a carrier for fragrances or actives, recognizing how it releases volatile oils while staying clear and odor-free itself, setting the foundation for creative new products across market sectors.
There’s learning that only builds through producing batch after batch for industrial and consumer clients. Consistently running through our reactors, PMX-200 100 cSt demonstrates time and again the same properties batch after batch—clear color, neutral odor, precisely measured viscosity—that makers of creams, greases, and sprays count on. Equipment operators comment on easy drum transfers, fewer leaks, and shorter downtime. QC teams appreciate reliable, repeatable results when checking viscosity and solubility. Formulators point to far fewer stability issues over aging and temperature swings. These stories repeat themselves across customer segments, from multinationals to niche contract fillers.
Having witnessed how minor specification drift or contamination can ripple through a supply chain, every kilo shipped carries with it the assurance of traceability, proven performance, and responsive support. We don’t just rely on certificates; regular engagement with technical teams at customer sites, remote troubleshooting, and rapid supply of test samples or technical documentation keep production running smoothly—even when regulatory profiles shift or new performance standards come into play.
As industrial standards rise, there’s a burgeoning call for biocompatibility, lower environmental impact, and more transparent supply chains. We’re investing in research that further reduces residual impurities, captures even stricter environmental targets, and leverages both internal innovation and feedback from the field. PMX-200 100 cSt now features even lower levels of volatiles, meets an expanded suite of analytical tests, and comes in packaging designed for rapid disposal or recycling.
We stay in close contact with our partners to document the impacts of minor reformulations and anticipate rising requirements—such as upcoming standards limiting VOCs in consumer products or new labeling obligations. Manufacturers require fluid dialogue and rapid adjustment. PMX-200 100 cSt’s formula holds steady amid these evolutions, allowing our customers to avoid unanticipated headaches. In moving toward a more circular, sustainable future, every piece of the process—energy, waste, compliance—stands to gain from a product optimized through thousands of real-world user experiences and the lessons drawn from them.
Our production teams work alongside engineers, chemists, and operators, logging the small wins—like fewer clogs in transfer lines, shorter QA checks, or reports of easier cleanouts. Over years, this record builds an honest trust in what PMX-200 100 cSt delivers. As customer requirements shift, our technical and regulatory support keeps them ahead of the game, ensuring the same outcome: a reliable product without unwelcome surprises in production or finished goods.
Feedback from longtime clients gives us the clearest picture of what continues to matter: low impurity levels, batch-to-batch reproducibility, fast mixing, thorough dispersion, and absence of irritants. Meeting these real-world demands of performance and process compatibility matters more than abstract promises. Regular technical exchanges, site visits, and open conversations keep the product evolving in concert with user needs. What emerges: not simply a silicone fluid, but a reliable tool tested over countless cycles and years, trusted to deliver on performance every time it’s loaded into a mixing tank or finished batch.
In the end, the ongoing conversation with our partners and the long trail of proven batches underline the value built into every drop of XIAMETER Silicone Fluid PMX-200 100 cSt. From the laboratory bench to the filling line, this grade continues to deliver the durability, safety, and performance that let our customers build products with quality, speed, and peace of mind.