| HS Code | 785080 |
| Product Name | SYLGARD Silicone Encapsulant / Gel 182 |
| Manufacturer | Dow |
| Appearance | Transparent liquid |
| Mix Ratio By Weight | 10:1 (Base:Curing Agent) |
| Viscosity | 3500 cP |
| Working Time | 1.5 hours at 25°C |
| Cure Time | 24 hours at 25°C |
| Hardness Shore A | 45 |
| Dielectric Strength | 21 kV/mm |
| Operating Temperature Range | -45°C to +200°C |
| Thermal Conductivity | 0.2 W/m·K |
| Density | 1.12 g/cm³ |
As an accredited SYLGARD Silicone Encapsulant / Gel 182 factory, we enforce strict quality protocols—every batch undergoes rigorous testing to ensure consistent efficacy and safety standards.
| Packing | SYLGARD Silicone Encapsulant/Gel 182 is packaged in a 0.5 kg kit, typically including two labeled containers for mixing. |
| Container Loading (20′ FCL) | Container Loading (20′ FCL) for SYLGARD Silicone Encapsulant / Gel 182: Typically 10-12 MT, packed in 20-25 kg pails/drums. |
| Shipping | SYLGARD Silicone Encapsulant/Gel 182 is shipped in sealed, chemical-resistant containers to prevent contamination and leakage. Packages are labeled according to relevant safety and transport regulations, including hazard identification if applicable. Shipping conditions typically require a dry, cool environment, and handling procedures must comply with local, national, and international guidelines for chemical materials. |
| Storage | SYLGARD Silicone Encapsulant / Gel 182 should be stored in tightly closed original containers, in a cool, dry, and well-ventilated area away from direct sunlight and sources of ignition. Recommended storage temperature is below 30°C (86°F). Avoid contamination with incompatible materials and moisture. Follow all safety and regulatory guidelines for chemical storage to maintain product quality and ensure safe handling. |
| Shelf Life | SYLGARD Silicone Encapsulant/Gel 182 typically has a shelf life of 12 months when stored unopened at or below 30°C. |
SYLGARD Silicone Encapsulant / Gel 182 delivers specialized encapsulation and protection properties for precise industrial use. Our synthesis and quality control teams support complex downstream manufacturing in diverse segments. Below, we detail industry-specific application pathways and technical integration for this material.
Manufacturers in the power electronics sector use this silicone gel to encapsulate and protect sensitive microelectronic assemblies, such as IGBT modules, power MOSFETs, and rectifier bridges. The encapsulation process shields components from moisture, dust, mechanical shocks, and voltage tracking, which commonly occur in demanding operational environments like renewable energy inverters, traction drives, and industrial automation controllers. Our customers employ precision dispensing lines and custom molds for timing, depth, and interface adherence during gel application, ensuring thermal and electrical insulation without stress to fragile wire bonds or leads.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Lighting manufacturers select this silicone encapsulant for potting and sealing LED driver boards and arrays, especially in architectural, outdoor, horticultural, and industrial luminaires exposed to condensation, voltage surges, and vibration. The gel’s low modulus allows thermal expansion while maintaining optical clarity, critical for high-lumen, compact designs. Our technical support guides end users on degassing, potting depth, and interface smoothness to minimize bubble entrapment and maintain dielectric integrity during LED module operation and maintenance cycles.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Medical device OEMs use this gel to encapsulate pressure, flow, and biosignal sensors where biocompatibility and low outgassing are essential. The material allows for flexible sealing around MEMS chips, flexible PCB leads, and fiber optic interfaces, especially in diagnostic, imaging, and patient-monitoring equipment. Technical teams at customer sites perform batch-level cytotoxicity and extractables testing as part of standard device validation cycles, and our product documentation supports submissions to global medical authorities.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Tier 1 automotive suppliers use this gel to fill and protect PCBs, ASICs, and sensor assemblies in under-hood and cabin ECUs. The gel’s thermal stability, chemical resistance, and cure characteristics make it compatible with automated production of brake, engine, and airbag controllers subject to long service life and exposure to oil, fuels, and temperature cycling. We provide support for viscosity management, automated metering, rework protocols, and interface adhesion to aluminum, FR4, and engineering plastics as required by vehicle OEMs.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
OEMs in factory automation, process instrumentation, and harsh-environment robotics use this gel to pot and seal inductive, capacitive, optical, and chemical sensors, as well as fieldbus and multipin connector assemblies. This encapsulant prevents failures due to capillary moisture, dust ingress, vibration, or industrial fluids while accommodating flex in overmolded cable transitions in sensor arrays and bus couplers. Our engineering team advises on cure cycles and interface activation to maximize potting integrity on metals, glass, and high-temperature plastics such as PPS and PEEK.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Competitive SYLGARD Silicone Encapsulant / Gel 182 prices that fit your budget—flexible terms and customized quotes for every order.
For samples, pricing, or more information, please contact us at +8615365186327 or mail to sales3@ascent-chem.com.
We will respond to you as soon as possible.
Tel: +8615365186327
Email: sales3@ascent-chem.com
Flexible payment, competitive price, premium service - Inquire now!
On the factory floor, technicians and engineers run into a range of environmental challenges that can ruin sensitive electronics. Moisture, dust, vibration, and even accidental contact threaten the reliability of circuit boards and delicate sensor assemblies. Having spent years trying different protective materials for demanding jobs, I’ve seen the difference a consistent, robust encapsulant makes. That’s where we bring out SYLGARD Silicone Encapsulant / Gel 182. For those who carve their reputation on delivering dependable, protected electronic assemblies, this gel stands apart for a reason.
Gel 182 cures quickly at room temperature and gives a soft, pliable finish that cushions fragile components. The gel formula flows into crevices and around miniature parts, hugging every surface—something rigid potting compounds never managed for us. Working directly with OEMs, our team has supported thousands of high-reliability applications in aerospace, automotive controls, power supplies, and even sensitive medical sensors. Every time, SYLGARD 182 gets chosen for shielding what matters most: lasting function in tough conditions.
Spec sheets mention dielectric strength, low modulus, and chemical resistance. In our shop, those features translate into advantages you can see and feel. SYLGARD Gel 182 remains flexible across wide temperature ranges. Where hard encapsulants would crack or delaminate during freeze/thaw cycles, our gel keeps electronics protected. Field failures due to environmental stress get dramatically reduced. Electronics potted with other materials often come back damaged during repairs because the rigid encapsulant needed sawing or chiseling for rework. SYLGARD 182 avoids that by staying soft, so you can peel it away, fix a component, then pour fresh gel back on. It saves hours of labor and expensive rework.
The chemical stability of SYLGARD gel means peace of mind. Typical urethane and epoxy encapsulants turn brittle or absorb atmospheric moisture over time, which gradually leads to insulation loss and corrosion. We have boards potted with SYLGARD 182 that have lasted through multiple product cycles in the field, untouched by humidity or aggressive cleaning solvents. Customers in humid and corrosive environments, from telecom base stations to automotive control modules, depend on SYLGARD gel to keep their electronics operating. That’s why I guide partners toward this silicone, especially if installations run where conditions flip between cold and hot, dry and wet.
In production lines, downtime and waste eat into margins. Gels that cure inconsistently, leave bubbles, or require mixing and degassing mean longer cycle times and more rejected units. We’ve found SYLGARD Gel 182’s room-temperature cure system fits nearly any assembly workflow. The two-component system mixes in a 1:1 ratio that allows automating the pouring step, or mixing by hand for small batches. It’s forgiving—no elaborate ratios, no last-minute rush against working time. Once mixed, it remains workable long enough for proper filling, but sets fast enough that the gel won’t sag out of position or spill over.
With experience, we noticed technicians can handle repairs more confidently. If a component underneath the gel needs replacing, slicing out the encapsulant doesn’t require special tools, and the substrate stays clean for recasting with fresh gel. This limits unnecessary waste, which in turn reduces both production costs and environmental footprint. Compared to harsh-smelling epoxies that need heat to cure and release irritating fumes, SYLGARD gel remains safe for operators and less taxing on air-handling units in the plant.
Clean workstations stay that way. I’ve watched teams learn that if gel drips onto surfaces, it peels up cleanly instead of sticking and hardening overnight. Assembly supervisors no longer fret over stubborn residue or expensive downtime from cleanup. These details sound small, but they fundamentally reshape daily life on a production floor.
Aerospace contractors became early adopters of SYLGARD 182 due to their need for the highest possible reliability. Black boxes, navigation modules, and environmental sensors often operate at altitudes and temperature extremes, facing rapid pressure shifts and constant vibration. In these conditions, traditional rigid pottants often fail. We have collaborated with avionics teams that demand true lifetime performance, and SYLGARD 182’s low-modulus gel construction protects even the tiniest solder joints from micro-cracking. Engineering managers came back to us with reports of assemblies that passed thermal cycling from -55°C to 150°C, retaining both adhesion and flexibility throughout.
Automotive suppliers find the gel remarkable for underhood electronics, where repeated engine heating cycles destroy conventional encapsulants. Sensors potted in SYLGARD show much higher retention of sensitivity, since the gel’s damping effect means wires and fine connections are never stressed directly by vibration or expansion.
Medical device designers encounter tight regulatory hurdles—SYLGARD’s biocompatibility allows use not only in lab equipment but also in select diagnostic and patient-contact devices. Its electrical properties and longevity have reduced field failures, which is critical for equipment that must work inside ambulances or remote clinics, sometimes for years without a single service call. I still recall a customer reporting back after a breakdown in a desert clinic: the only electronics to survive were those sealed in SYLGARD gel. Stories like these reinforce why our team stands behind this product.
In practice, most encapsulant selection comes down to a few key points: ability to provide a physical barrier against moisture, flexibility under repeated thermal cycles, ease of rework, and total cost of use. Conventional epoxies win in applications where hardness brings benefit—such as mounting power semiconductors for heat spreading. But in the world of sensor electronics, RF modules, and delicate circuits, hardness is a liability. Cracks propagate rapidly, and removing hard potting always damages parts.
Urethane gels somewhat match silicone for softness, but they yellow over time, which makes visual inspections difficult. Some also react with moisture and can outgas, spoiling contact pads or sensitive signal traces. We had entire lots of diagnostics boards ruined years ago by an inferior gel that left behind sticky residue and failed tests. After that, we only chose encapsulants that left optics clear, were chemically inert, and didn’t degrade—qualities SYLGARD 182 achieves consistently.
The major difference with our silicone encapsulant comes from its superior resilience. Gel 182 survives years of real stress—cycles of hot and cold, soaking humidity, vibration, and accidental knocks—without turning brittle or pulling away from board surfaces. Other products might pass new product introduction, but mid-life failures from stress cost much more to repair than the savings from using a lower-grade encapsulant. Assemblies remain easier to repair and rework, and above all, customer returns for electrical shorts or corrosion plummet when we use SYLGARD 182 instead of other options.
Many responsible manufacturers scrutinize longer-term safety and compliance with regulatory requirements. Our production protocols provide full material traceability. Each batch of SYLGARD Gel 182 undergoes testing for volatile organic compounds, halogens, and other restricted substances. Production engineers appreciate the confidence that comes from consistent, non-reactive chemistry. Operators working with our silicone encapsulant see fewer allergic reactions or fumes, which reduces absenteeism and streamlines compliance documentation.
We listen to customers who require transparency for global shipping, especially when sending finished assemblies into North America, Europe, or Asia. Years of collaboration with certification labs ensures we ship material supported by up-to-date MSDS and global RoHS/REACH declarations. There’s no guesswork—just a straightforward product path from raw material to field deployment. This reliability in documentation and compliance gives procurement teams one less thing to stress about, particularly when managing high-volume, fast cycle production lines.
In our experience, trusting SYLGARD Gel 182 means never worrying about late-stage regulatory issues or unexpected supply chain interruptions. We keep lines moving because we control every step of the process, from silicone synthesis through batch QC. OEMs and contract assemblers know the material in every drum matches the previous one, down to the smallest electrical and physical property.
Built into our decision to back this encapsulant is the impact on real-world productivity. If your team ever spent half a shift waiting for a hard potting material to cure, that's lost time, lost revenue, and sometimes lost contracts. SYLGARD 182’s room-temperature cure, coupled with a moderate working time, fixes this bottleneck. Whether on high-speed dispensing stations or hand-mixed prototype tables, the material fits into nearly every production environment.
Technicians adapt quickly. The soft gel provides visual confirmation that boards are covered and protected. If mistakes occur, gel can be removed and replaced without discarding an entire board. We find this most useful in service centers and field repairs, where extending a product’s lifecycle beats scrapping expensive assemblies.
Training time drops, too. Unlike some encapsulants that require nitrogen atmospheres, elevated cure ovens, or post-processing steps, our system simplifies onboarding for new operators. Less specialized oversight means the manufacturing process stays flexible, scaling up or down depending on order volume without changing workflows or investing in custom equipment.
Plant maintenance managers often note the lack of residual odors in production zones. By avoiding harsh solvents, our encapsulant delivers a safer, easier-to-clean workplace, and that counts for a lot. Cleaner, safer, faster—these are not just buzzwords, but tangible improvements we’ve tracked over years of deployment.
Predicting what tomorrow’s electronics will ask of materials is not easy. Circuit density continues to rise. Boards fill with IoT sensors smaller than a fingernail—every one more vulnerable to moisture, ionic contamination, and mechanical strain. Manufacturing partners ask us to go beyond what worked yesterday. They want practical, field-proven solutions that keep up.
SYLGARD Gel 182’s success grows from adaptability. Design teams want to experiment with smaller, thinner, lighter assemblies—encapsulants must not hinder those innovations. This silicone gel coats without adding bulk or stiffness, supporting advanced microelectronics and flexible hybrid circuits as easily as larger modules. R&D engineers increasingly specify the gel for pilot builds knowing it will scale with them to full production with no change in line setup or tooling.
As manufacturing footprints expand globally, the pressure on supply chains increases. Having end-to-end control of silicone synthesis and formulation allows us to guarantee performance on every continent. If an automotive supplier builds advanced sensor modules in Detroit today and moves volume to Asia next year, they get the same high-purity SYLGARD gel—no surprises, no reformulation.
I remember a customer in the renewable energy sector who asked for a material that could survive twenty years of constant outdoor exposure, cycling through tropical rain, desert heat, and arctic cold, with minimal maintenance. Their panels’ electronics run the risk of either frying or corroding away if the seal ever fails. We worked directly with their engineers, mapping out gel thicknesses, cure profiles, and optimal dispensing. Surveys on five-year field units came back with nearly flawless performance records. Less than one percent failure rate—not an empty promise, but proven from data logged on solar installations across three continents.
Defense contractors have different needs—sometimes an encapsulant must absorb shock from vehicle explosions or abrupt landings and make sure essential electronics operate through those conditions. The gel’s soft consistency works as a shock absorber, and after shocks pass, technicians can cut out and repair damaged circuits on the spot. Years ago, a helicopter control module sealed in SYLGARD 182 was recovered, still working, after a crash in the field. These are not normal conditions, yet the material keeps performing even outside its comfort zone.
Feedback keeps us on our toes. City infrastructure projects, medical systems, and consumer electronics developers return to SYLGARD 182 for complicated assemblies that require a long shelf life and stable electrical performance. Our best insights always come from these dialogues, and we update our process methods and technical support based on them. More than anything, SYLGARD 182 thrives because we listen to the people who use it every week.
The encapsulant is only part of the answer. What makes SYLGARD 182 successful in manufacturing lines isn't simply its technical properties, but the partnership behind it. Decades in the specialty chemical field taught us that engineering support means just as much as the drum of product. Our technical specialists run onsite workshops, demonstrate application tooling, and follow up with troubleshooting to make sure every batch works as expected.
We respond to changes in requirements—faster cycle times, unusual environmental standards, more stringent certifications. If a customer discovers a new contaminant in their environment, or a field failure points to a subtle defect, our team works with theirs to refine processing conditions, recommend equipment tweaks, or develop custom packaging options for smaller-scale runs. The flexibility to respond quickly gives manufacturers an edge in markets that expect better performance and longer product life with every generation.
Assemblers especially value the lack of “surprise” hidden costs. Once the gel process fits into an existing line, it keeps running. Quality yields stay high, supervisors spend less time fire-fighting, and managers gain both financial and reputational benefits from fewer returns and warranty claims.
Encapsulation might sound like a small slice of electronics production, but real performance gains build up over time. The wrong choice leads to years of headaches. As engineers and chemical manufacturers, we take those risks seriously and strive to provide a product that adds value at every stage—design, process, shipment, field use, and even eventual disposal. Our formulation for SYLGARD 182 focuses on chemical inertness, low stress, consistent viscosity, and broad compatibility with evolving circuit materials and designs.
Our development teams improve testing and lot verification constantly. By investing in advanced lab equipment and on-site simulation assets, we’re able to replicate customer environments, confirm real-world results, and adjust our quality protocols accordingly. If customer specs change, our R&D doesn’t lag behind. The direct feedback loop between manufacturer and assembler lets us refine everything from shelf life to thermal cycling resistance.
We work alongside product design teams to optimize every part—dispensing nozzles, packaging sizes, and recommended application geometries. This hands-on collaboration keeps surprises off the manufacturing floor and supports teams launching new products on schedule.
Commitment to quality means the true test comes years after installation, not on the production line. SYLGARD Silicone Encapsulant / Gel 182 outperforms standard gels and rigid pottants by providing design freedom, ongoing access for repairs, and unmatched protection across the widest set of environmental hazards. Having supplied and applied many types of protection over decades, I trust this gel to safeguard every project worth protecting—whether it’s a small batch of prototypes in a startup lab or mass production on automotive lines running three shifts a day. We keep listening, building, and improving, knowing that every component protected by SYLGARD gel reflects our name and reputation in the world of manufacturing.