| HS Code | 698023 |
| Product Name | SYLGARD Silicone Encapsulant / Gel 164 |
| Type | Two-part silicone gel |
| Appearance | Clear to slightly hazy |
| Mix Ratio By Weight | 1:1 |
| Viscosity Mixed | 1200 cP |
| Working Time | 2 hours at 25°C |
| Cure Time | 24 hours at 25°C |
| Dielectric Strength | 21 kV/mm |
| Thermal Conductivity | 0.17 W/m·K |
| Operating Temperature Range | -45°C to 200°C |
| Density Mixed | 1.04 g/cm³ |
As an accredited SYLGARD Silicone Encapsulant / Gel 164 factory, we enforce strict quality protocols—every batch undergoes rigorous testing to ensure consistent efficacy and safety standards.
| Packing | SYLGARD Silicone Encapsulant/Gel 164 is packaged in a 0.5 kg two-part kit, featuring separate labeled containers for resin and hardener. |
| Container Loading (20′ FCL) | Container Loading (20′ FCL): Typically contains 8MT (in 200kg drums) of SYLGARD Silicone Encapsulant/Gel 164, securely palletized. |
| Shipping | SYLGARD Silicone Encapsulant/Gel 164 is shipped in sealed, chemical-resistant containers to ensure stability and prevent contamination. It should be handled in accordance with safety guidelines, kept away from moisture and incompatible substances, and transported at ambient temperature. Packaging meets relevant regulations for safe handling and environmental protection during transit. |
| Storage | SYLGARD Silicone Encapsulant/Gel 164 should be stored in its original, tightly sealed containers at room temperature (ideally 25°C or below) in a dry, well-ventilated area away from direct sunlight, heat sources, and incompatible substances such as strong acids or bases. Avoid freezing. Keep containers upright to prevent leaks, and follow all manufacturer handling and storage recommendations for safety. |
| Shelf Life | SYLGARD Silicone Encapsulant/Gel 164 has a shelf life of 12 months when stored in original, unopened containers at room temperature. |
SYLGARD Silicone Encapsulant / Gel 164 has been widely implemented in specialized industrial sectors that demand high-performance electrical insulation, environmental sealing, and protective encapsulation. As the original manufacturer, we prioritize proven applications with distinct process requirements and compliance needs, supporting a range of mission-critical downstream operations.
Our silicone gel plays a critical role in protecting LED modules and lighting assemblies from moisture ingress, dust, vibration, and thermal cycling encountered during long-term use in residential, automotive, and commercial lighting systems. The encapsulant directly enhances the operational lifespan and photometric stability of finished luminaires, making it suitable for installations exposed to challenging environments or outdoor conditions.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Automotive ECUs rely on silicone encapsulants to secure microelectronic components against thermal shocks, condensation, chemical spray, and prolonged vibration. The material enables OEMs and Tier 1 suppliers to meet stringent reliability and safety requirements across vehicle lifespans, especially for powertrain, ADAS, and infotainment modules undergoing frequent thermal cycling and field stresses.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Process sensors, transducers, and control probes operating in harsh environments need reliable encapsulant protection to guard sensitive elements and electronics against exposure to process fluids, abrasive media, and rapid temperature swings. Our silicone gel delivers consistent dielectric properties and cushioning support, ensuring continued sensor accuracy and durability in critical measurement nodes across manufacturing facilities and infrastructure assets.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Encapsulating sensitive medical device electronics with silicone gel mitigates failures caused by body fluid infiltration, electrostatic discharge, and mechanical stress encountered during daily device usage or repeated sterilization. Medical OEMs integrate our encapsulant in devices such as monitoring consoles, handheld diagnostic units, and non-implant electronics to fulfill global biocompatibility and risk management standards.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Manufacturers of base-station and network infrastructure equipment employ silicone gels to pot high-voltage circuits and power supplies, ensuring component insulation in high-humidity and dust-laden environments. Encapsulation maintains circuit integrity for transmission reliability, while supporting compliance with strict telecom safety standards for global deployments.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Solar panel junction boxes require encapsulant gels to protect electrical contacts and diodes from moisture, dust, and salt fog penetration, especially for rooftop and utility-scale installations exposed to seasonal weather extremes. Our silicone gel consistently delivers high insulation resistance and withstands long-term UV exposure without degradation, supporting manufacturers aiming for extended photovoltaic module warranties and international certifications.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Competitive SYLGARD Silicone Encapsulant / Gel 164 prices that fit your budget—flexible terms and customized quotes for every order.
For samples, pricing, or more information, please contact us at +8615365186327 or mail to sales3@ascent-chem.com.
We will respond to you as soon as possible.
Tel: +8615365186327
Email: sales3@ascent-chem.com
Flexible payment, competitive price, premium service - Inquire now!
Working in chemical manufacturing for over two decades has put us close to every shift in electronic packaging and environmental protection. Over time, more advanced designs and tighter assemblies have demanded reliable solutions for potting, coating, and encapsulating sensitive circuitry. SYLGARD Silicone Encapsulant / Gel 164 has continually proven that simple, well-mastered chemistry improves not only product performance but how technicians and engineers approach their work.
The structure of SYLGARD 164 centers on a room-temperature curing, two-part silicone system. The kit arrives with resin and hardener, both designed for easy mixing and application. We fine-tune viscosity at the plant to balance fast flow with ample surface coverage, allowing this gel to settle into small spaces without air voids or unevenness. Few air bubbles develop, even as the mixture thickens during the working time. This flow and leveling characteristic means circuit boards, high-voltage connectors, and delicate sensor assemblies receive consistent protection layer-by-layer.
Once cured, this gel forms a tough but flexible barrier—what engineers sometimes call a “cushion effect” that resists repeated thermal cycling and vibration. Unlike rigid epoxies or hard polyurethanes, SYLGARD 164 allows a certain amount of movement within the encapsulated area. Pins, wires, and joints avoid stress cracking, especially for applications exposed to complex temperature changes or physical stress in the field.
Electronic devices often fail for reasons invisible to the user. Dust, humidity, and mechanical shock all compromise sensitive circuits long before an error shows up on a bench test. Over decades, we’ve seen how insufficient encapsulants lead to premature corrosion, solder joint failure, and catastrophic breakdown in mission-critical systems. SYLGARD 164 stands out by providing robust resistance to water ingress and environmental contaminants, especially in humid or outdoor installations.
We developed this product through detailed material testing under accelerated aging and real-world scenarios. Anyone who rebuilds a weathered PCB with our gel notices the absence of yellowing, cracking, or sticky residues even years later. Consistent dielectric performance and thermal stability allow electronics manufacturers to extend service intervals, meet stringent reliability targets, and reduce costly recalls.
The pot life of SYLGARD 164 is long enough for complex assembly, yet the cure schedule stays short on a typical production line. Assemblers manage less waste and minimize errors since the gel doesn’t skin over too quickly or drip away from vertical surfaces. This flexibility improves yield rates and supports leaner batch sizes.
We’ve listened as clients explain why re-workability sometimes outweighs the highest mechanical strength. In this context, a key feature of SYLGARD 164 is its ability to be removed, repaired, or adjusted in the field using simple hand tools, without destroying underlying traces or solder pads. Rigid encapsulants rarely allow this—it becomes a decisive factor for high-value repairs or after-market upgrades.
Silicone’s resilience to extremes earns it a place in harsh environments, and SYLGARD 164’s performance stays stable from arctic chill to desert heat. Thermal expansion rates match most board substrates, so cracking and delamination rarely occur. Even after repeated freeze-thaw or heat cycle tests, our lab data shows minimal change in hardness and adhesion profiles.
From utility meters on remote power poles to railway signaling gear rattling beside tracks, engineers talk about catastrophic water penetration or corroded joints. Real-world installations often face far more intense exposure than laboratory test norms. The hydrophobic chemistry of this material forms a barrier where water simply beads up rather than leaking through, protecting both surface-mount and through-hole designs.
At our plant, we formulate a range of encapsulants. Not every application suits a single product. In daily practice, SYLGARD 164 fills the space where conventional rigid potting and ultra-soft gels both fall short. Rigid types—such as bisphenol epoxy systems—excel for high-abuse, static installations but create headaches if post-assembly service or inspection becomes necessary. Ultra-soft gels, meanwhile, sometimes migrate or slump at elevated temperatures, risking leakage or sag into connectors.
SYLGARD 164’s medium modulus provides a blend of mechanical protection and compliance. Its cure rate and viscosity make it superior for deep, complex cavities compared to thick, highly-filled pastes that resist flow and trap voids. Chemically, it also resists a wider range of cleaning agents and solvents than alkoxy-cure competitors, supporting broader maintenance routines in power conversion and LED modules.
Over years of field support and direct batch production, we’ve seen SYLGARD 164 become a “go-to” solution for industrial sensor nodes, aerospace harnesses, automotive electronics, and high-reliability data acquisition modules. High-voltage power supply makers deploy it across the transformer windings and driver circuits, where insulation breakdown would otherwise spark a crisis. LED lighting manufacturers trust it for intricate assemblies inside sealed street lamps, confident in the gel’s clarity and weatherproofing.
Our plant worked with manufacturers building environmental sensors for marine deployment. Each sensor faced repeated submersion and drying, often contaminated by salt spray and biological growth. After months in tide pools, only the circuits sealed with SYLGARD 164 continued to meet original calibration points—competitor gels showed swelling or water inclusions.
While strong performance matters, we never overlook regulatory compliance or the work environment. During manufacturing and application, SYLGARD 164 maintains low toxicity and low volatility. Operators spend all day near open containers, so we monitor emissions and cross-check every batch against evolving regulations. Unlike more aggressive dual-component epoxies, which release amines and other vapors, this silicone formulation works safely in confined production spaces without elevated extraction costs.
We emphasize clean processing from receiving raw inputs through to packaging. Waste streams see tight controls and solvent recovery. In repeated audits, both internal and third-party, the occupational exposure limits for our silicone encapsulant have tested well below concern thresholds. End-users regularly cite easy handling and predictable mix ratios as reasons for repeat business from teams responsible for batch-to-batch quality control.
As direct manufacturers, we take pride in supporting customers well past the point of shipment. Clients often call our lab with specific challenges—maybe a unique board geometry traps bubbles, or maybe a new assembly line demands faster throughput. Because we handle every step, from raw mixing to final packaging, our field engineers work with real application data rather than theoretical best-case descriptions.
Some competitors outsource production and focus on glossy product literature. By contrast, we troubleshoot with real-time viscosity measurements, microsection images, and simulated field exposures. If an assembly requires a modification in cure schedule or viscosity adjustment, our formulation team responds with production-scale pilot runs, followed by batch documentation. We see ourselves as partners—direct conversations cut through guesswork. Often we walk line teams through the first mix and pour, only leaving once technicians are confident in the process controls.
Volume production often means scaling from benchtop potting runs to thousands of units per day. We designed SYLGARD 164 for metering pumps and automated dispensing systems, matching fill rates common in modern facilities. Large-aperture syringes and pressure pots handle this gel consistently without clogging nozzles or introducing delays due to premature curing.
The formulation holds up under aggressive mixing—pigments or inert fillers blend smoothly to achieve contrast for inspection, or alter physical tracking for tamper evidence. In automated or semi-automated lines, the silicone’s thixotropic flow ensures that components receive reproducible fills, reducing scrap and downtime. We tune every production lot to maintain these physical operating windows.
Electronics production continues to evolve, and reliability targets only rise. In automotive control systems and aerospace electronics, each encapsulated board must survive extended vibration, moisture cycling, and possible contaminant exposure without performance drop-off. Our work with Tier 1 automotive suppliers revealed the value of a gel that cushions components from daily jostling and high-g impacts, even as vehicles age and insulation properties matter more for safety-critical systems.
Continued customer feedback points to SYLGARD 164’s long-term adhesion and electrical performance under stress. Our electrical tests confirm high dielectric strength—critical for power supplies, transformers, and sensor arrays exposed to mixed voltage environments. Lifetime testing at the plant simulates real installation stress, bringing confidence to design reviews and downstream quality assurance.
In chemical manufacturing, every lot tells a story. Some jobs demand the stiffest, hardest barrier; others thrive on gentle support and ease of repair. Over the years, we’ve found that SYLGARD 164 fits the hard-to-define middle ground where performance and service both carry long-term value. Its curing profile, electrical isolation, and mechanical behavior often bridge gaps for demanding process engineers and reliability teams.
Support teams in electronics manufacturing, service, and field repair continue to praise the adaptability and predictability that comes from a silicone encapsulant crafted with practical feedback looped directly into the plant. As requirements become tighter and device expectations rise, products like SYLGARD 164 will remain foundational in safeguarding the next generation of high-value electronic assemblies.
Our role as direct chemical manufacturers means we watch each shipment move from raw components through critical inspections and on to partners around the globe. Every call, every returned batch, every line-side challenge shapes our process and our products. SYLGARD Silicone Encapsulant / Gel 164 speaks to this commitment—a workhorse crafted not by theory, but through years of hands-on formulation, real trial and error, and continual improvement. Electronic devices deserve more than “good enough” protection. They deserve solutions crafted with the user, field engineer, and manufacturer in mind.