| HS Code | 485839 |
| Product Name | SYLGARD Silicone Encapsulant / Gel 160 |
| Manufacturer | Dow |
| Type | Silicone Gel |
| Color | Clear |
| Mix Ratio | 1:1 by weight |
| Viscosity | 4000 cP (Part A), 4000 cP (Part B) |
| Cure Time | 24 hours at 25°C |
| Operating Temperature Range | -45°C to 200°C |
| Hardness | Gel-like, no Shore hardness |
| Dielectric Strength | 20 kV/mm |
| Specific Gravity | 0.97 |
| Pot Life | 2 hours at 25°C |
| Moisture Resistance | Excellent |
| Thermal Conductivity | 0.16 W/m·K |
As an accredited SYLGARD Silicone Encapsulant / Gel 160 factory, we enforce strict quality protocols—every batch undergoes rigorous testing to ensure consistent efficacy and safety standards.
| Packing | SYLGARD Silicone Encapsulant/Gel 160 is packaged in a 1 kg kit, consisting of two labeled containers within a sturdy box. |
| Container Loading (20′ FCL) | SYLGARD Silicone Encapsulant/Gel 160 is shipped in 20′ FCL containers, securely packed in drums/pails with proper chemical labeling. |
| Shipping | SYLGARD Silicone Encapsulant / Gel 160 is shipped in secure, leak-proof containers to prevent contamination. The packaging complies with relevant chemical transport regulations, ensuring safe handling. Each shipment includes safety data sheets (SDS) for reference. Store and transport in a cool, dry environment, away from direct sunlight, and handle with appropriate protective equipment. |
| Storage | SYLGARD Silicone Encapsulant/Gel 160 should be stored in its original, tightly sealed containers at room temperature (ideally 10–27°C/50–80°F), in a dry, well-ventilated area away from direct sunlight and sources of heat or ignition. Protect from moisture, contamination, and freezing. Proper storage extends shelf life and maintains product performance. Always follow manufacturer guidelines for storage and handling. |
| Shelf Life | SYLGARD Silicone Encapsulant/Gel 160 typically has a shelf life of 12 months when stored in original, unopened containers at room temperature. |
SYLGARD Silicone Encapsulant / Gel 160 meets stringent demands in advanced industrial protection. Our technical teams supply this material directly to multiple high-value downstream markets, ensuring traceability and uninterrupted quality. Below we explain exact processing use cases.
Our material provides durable environmental and mechanical protection for LED modules used in headlamps, indicators, and rear-light assemblies. The encapsulant’s controlled viscosity ensures gap-filling and minimal air entrapment, while its thermal stability supports high-brightness LED lifetime in harsh automotive conditions. Clients rely on strict interface compatibility with PCBs and optical elements within automated potting and curing lines.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Power module manufacturers select our encapsulant to insulate semiconductor modules and busbars, especially in variable frequency drives (VFDs) and industrial automation inverters. The gel’s dielectric strength resists arc-over under repeated voltage cycling, protecting both IGBT and driver circuit assemblies. Controlled rheological properties reduce voiding and ensure reliable operation within multi-shift panel assembly settings.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Manufacturers of diagnostic sensor arrays use our gel to encapsulate sensitive electronic and MEMS components. The encapsulant prevents exposure to humidity, reactive chemicals, and temperature extremes during both assembly and device operation. This protection ensures long-term electrical signal stability and minimizes interference in blood analyzers, PCR modules, and imaging cartridge electronics.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Our encapsulant secures PCB and antenna assemblies against moisture, particulate, and thermal shock in compact wireless modules. The consistent dielectric constant supports stable radio frequency transmission in sensors, routers, and industrial IoT gateways. Fabricators specify the material for its compatibility with miniaturized SMT component lines and requirement for high throughput encapsulation cycles.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Coil winding and vehicle systems suppliers use this encapsulant to pot high-voltage ignition modules, protecting copper windings and core materials from thermal cycling, humidity, and chemical ingress. The gel formulation supports rapid, void-free filling and fast throughput on modular winding and sealing lines. Customers in internal combustion sector value the resilience to hydrocarbon vapor and large daily thermal gradients.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Manufacturers of outdoor signage and display panels use this gel to conformally coat PCBs, protecting against water, dust, and aggressive urban environments. The material maintains electrical insulation and flexibility across a wide temperature range, preventing delamination and corrosion. It supports fast cycle times and minimizes maintenance needs for high-brightness LED arrays and control logic boards under continuous exposure.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Competitive SYLGARD Silicone Encapsulant / Gel 160 prices that fit your budget—flexible terms and customized quotes for every order.
For samples, pricing, or more information, please contact us at +8615365186327 or mail to sales3@ascent-chem.com.
We will respond to you as soon as possible.
Tel: +8615365186327
Email: sales3@ascent-chem.com
Flexible payment, competitive price, premium service - Inquire now!
Manufacturing demands a clear understanding of what’s at stake on the factory floor and out in the field. Years spent refining silicone potting, encapsulating tough assemblies, and fixing regular supply chain headaches have taught us the importance of a reliable and versatile system. SYLGARD Silicone Encapsulant / Gel 160 has become one of our go-to solutions for projects where electronic protection, performance, and ease of processing can’t drop the ball. This product didn’t come out of a lab looking for shelf space; it grew out of real feedback, long pilot runs, and a constant push for simpler, safer, and more effective materials.
Talking with technicians, foremen, and engineers over the years, a few critical requirements always come up for encapsulating gels in electronics: solid electrical isolation, flexibility for thermal stress, strong moisture resistance, and manageable viscosity. SYLGARD 160 caught our attention and trust because its two-component formulation mixes and pours easily at room temperature, sets up without solvents, and locks into place to shield delicate circuitry. In routine board embeds, power module potting, or tamper-proofing sensor units, it consistently handles the day’s hard knocks—thermal cycling, vibration, accidental splashes, and exposure to typical chemicals found on a manufacturing floor.
Looking back at the projects that needed to maintain tight tolerances, SYLGARD 160 came in with a transparent, soft, almost gel-like cured mass. This means technicians inspecting sensitive wiring or chip placement still get a clear visual, while that same part gets all-around protection from contaminants. I remember a control unit that kept failing field-service water ingress tests: swapping out competitor epoxy for 160’s UV-resistant, flexible silicone solved the leaks—and the client’s support tickets dropped nearly overnight.
On paper, SYLGARD 160 comes as a kit—base and curing agent in specific ratios—ready for mixing. Out of the drum, its viscosity falls in the sweet spot: thin enough to pour or inject, thick enough to stay where it is applied and avoid unwanted dripping through seams or holes. The working time strikes a careful balance: you get enough open time for full component coverage, but cure completion fits within short batch cycles, not overnight holding. Most of the shop runs it at ambient temperatures, letting it crosslink fully within a few hours, though cooler environments may stretch that window a bit.
The cured gel achieves a flexible, tack-free surface, even if your parts flex slightly—no more popping seals or micro-cracks that let in trouble down the road. Dielectric strength runs high, especially compared to rigid-style encapsulants, and that has saved more than one assembly where arcing or shorting would spell disaster. Its low modulus means it won’t stress solder joints during thermal cycling—a big win for densely-packed boards and modules.
Years in manufacturing taught me you don’t stick with a product unless it proves itself across a heap of applications. In our own assembly lines, we turn to SYLGARD 160 for protecting sensitive PCB assemblies, relays, ignition modules, and power converters, especially those living outdoors or in enclosures where humidity spikes or dust creeps in. A major automotive supplier we know switched over after temperature cycling tests showed far less hard casing stress on their molded sensors. LED manufacturers use it to maintain light clarity and fixture reliability—not just for cleanrooms, but for warehouse or exterior signage where heat fluctuations and rain try to cause failures.
SYLGARD 160’s flowability makes it a mainstay in protecting connector blocks and miniaturized electronics where traditional, harder encapsulants can actually fracture solder pads or tiny conductors. More than one customer retrofit old meter housings by pouring 160 directly onto sensitive points, extending lifespan and drastically cutting service returns. Customer feedback tells us it punches above its weight in telecom and RF assemblies, helping suppress interference and boost insulation margins without complicated multi-step application routines.
Plenty of potting and gel products claim broad compatibility and outstanding performance. Why keep bringing in SYLGARD 160? It always circles back to real daily trade-offs. Many rigid epoxies or urethanes sound perfect—right until you try to service a part or expose it to heat cycles. Those tend to harden up, stick harder, and transmit stress back into your assembly. We’ve spent hours chiseling epoxy out of failed junctions, sometimes causing more damage.
SYLGARD 160 brings a soft, gel-like feel that cushions rather than strains cables and PCBs. If a redesign or repair comes up, careful tools can lift the cured gel without shattering laminated traces or connectors. Compared to slower-curing silicones that stall production lines, 160 keeps our throughput up and leaves little mess for cleanup, since overflow peels out without leaving residue or damaging labels and board markings.
On electrical properties, multiple in-house studies show it keeps insulation resistance high under tough conditions—salt spray, long humidity soaks, or exposure to common cleaning agents. The gel barely shows any yellowing after months of UV exposure, crucial for see-through housings or indicators. Competing gels can cloud or shrink back, which eventually leads to performance drop-offs or service calls.
SYLGARD 160 arrives in carefully batched pails or drums, with component labels matching production tracking paperwork. We often use simple static mixers or hand mixing for short runs, but for long batches, automated dispensers feed measured quantities straight into jigs or custom molds. Operators like its low odor and non-abrasive nature—a decided change from older formulas requiring nasty solvents or tedious ventilation steps. Clean-up takes less time, since uncured material wipes away, and standard PPE covers almost any risk during mixing or pouring.
Long-term storage in the plant doesn’t chew up cold storage space, and shelf life lets us rotate stock at a sane pace without last-minute disposal runs. Every time we onboard new staff for assembly and potting, SYLGARD 160 shows itself as efficiently trainable—easy measurement by volume or weight, straightforward blending, and no special hardware beyond what most electrical shops already carry. This keeps onboarding costs and incident errors down, which matters as much as raw material price every quarter.
Modern assembly lines rarely match textbook conditions. Humidity, temperature, line speed, and even operator experience shift from batch to batch. Over time, we trusted SYLGARD 160 because it closes variation gaps: from CNC-guided dispensers in high-volume plants to manual batch jobs in smaller tool shops, the material’s working window tolerates most of what a typical production day throws at it. It’s easy to catch drips or mis-pours—the gel wants to stay where you put it—and that means less rework or lost assemblies down the line.
Texture, flow, and clarity hold steady even as barometric pressure and ambient conditions waver, keeping us on spec without shifting our line QCs every season. Cure times track predictably across months of inventory, so we finish forecasted outputs without batching headaches or uncontrolled downtime.
Sustainability pressure keeps rising in our industry, and parts that have to be replaced after a single contamination or stress failure rack up costs far beyond materials. SYLGARD 160’s track record for extending part life in exposed, tough environments fits directly with these priorities. By protecting the circuit instead of sealing it in an unserviceable brick, we lower replacement rates and help customers reuse more parts. The product contains no halogens or heavy metals, and plenty of long-running clients pushed it through their corporate green audits without fail.
We see customers evaluating every aspect of long-term reliability these days. Field service calls, premature returns, or labor spent reworking assemblies can eat profit margins quickly. Deploying a potting material that actually stops outdoor corrosion or vibration failures right at the start means less scrap, fewer panicked calls, and more robust warranties for our downstream partners.
Plenty of the lessons we absorbed over decades evolve from the “things that didn’t work” side of production trials. Early on, using stiff, opaque encapsulants led to one headache after another: missed defects, impossible repairs, costly mistakes after assembly reflow, customer complaints about circuit failures right after install. SYLGARD 160 changed our workflow by letting inspection teams monitor placements under clear silicone, even after full potting. Field teams can sometimes gently lift away mass to address a failed component and reseal, lowering both short- and long-term maintenance needs.
Comparing customer claims before and after adoption of SYLGARD 160 shows a measurable drop in returns related to moisture, vibration, and board cracking. Teams working with harsh chemical environments—potash, some cleaning agents, salty air by the coast—noticed better resistance and longer intervals between end-user complaints. Telecom companies rooting out root-cause failures in pole-mounted junctions found cured gel still able to flex and rebound after months outdoors.
And let’s not discount repeatability: line audits looking at color, clarity, surface finish, and tactile feel across tens of thousands of encased boards found less batch variability and rare non-conforming output. Getting this kind of consistency without constant batch mixing recalibration saves money and cuts end-of-line inspection time.
Processing thousands of kilos of material a year, our technicians encounter recurring sticking points: ingredient separation in storage, inaccurate mix ratios, long cure times causing bottlenecks, or encapsulants hardening with unpredictable bubbles. SYLGARD 160’s formulation resists separation during normal warehouse handling, mixes easily, and degasses quickly during pour. We rarely chase after microbubbles or shrinkage issues after cure, and the self-leveling nature means we reach even fine crevices in complex assemblies.
Some clients feared that softer encapsulants would lose adhesion, creep, or leave gaps over time. Reality showed otherwise: 160 performs with excellent substrate wetting and stays put without slumping or creeping, even in hot spots or vertical pours. We use it comfortably in multilayer boards, winding terminations, and cable junctions where vertical climbing could otherwise present a risk.
For those needing faster output, moderate heat can speed crosslinking, but our mainline never requires ovens or high-energy curing. This lets us run shorter production cycles without extra equipment or energy bills. For service teams, the added benefit lies in rework: unlike epoxies or rigid polyurethanes, a skilled hand can extract potted boards for repair or diagnostic access if needed, giving one more shot at customer satisfaction.
Electronics and power systems keep shrinking and becoming more complex, pushing every step in fabrication toward tighter tolerances and lower defect rates. SYLGARD 160’s low modulus and high dielectric strength create an insurance policy for the next wave of designs—fine-pitch SMT, miniature relays, or high-wattage lighting modules. As smart devices branch into IoT, embedded sensors, and outdoor wireless nodes, the challenges of condensation, dust, and ruggedization grow stiffer. This encapsulant gels right into those spaces, keeping up with changes in geometry and heatsink needs, without compromising visibility or access down the line.
Sometimes a customer approaches asking whether 160 fits an oddball application, like protection for specialty antennas, battery packs, or exotic signal telemetry. Experience shows that with minor tweaks in dispense volume or layout, SYLGARD 160 often meets the challenge. We rely on it for pilot production lines testing new board layouts, where flexibility and rapid prototyping need to connect tightly with batch-ready, reliable potting—no early lock-in to expensive or specialized resin stock.
In-house and customer feedback leave their mark on how we adapt our use of SYLGARD 160. Improvements in batch mixing, accuracy in dispensing, documentation of cure profiles, and even tweaks in operator training have all been prompted by actual experience on the line. Often it’s the feedback loop from a tech problem in a plant—or from the field, where repair teams weigh in on the repairability and resilience of potted assemblies—that keeps us refining how we run it. We don’t just look for a product that does its job on paper. It has to fit into young technicians’ learning experiences and keep pace with the experienced hands who know when something isn’t quite right. Reliability isn’t a marketing term on our floor; it’s a daily requirement.
Our teams prefer SYLGARD 160 not because of promises on a label, but because shift after shift, it delivers results we can bank on: clean encapsulation, flexible protection against mechanical and chemical insults, and a workflow that doesn’t bog down when the orders spike or the weather turns.
We have tested plenty of materials that promised a lot and delivered little once exposed to the actual pace and unpredictability of everyday manufacturing. SYLGARD Silicone Encapsulant / Gel 160’s staying power comes from its ability to hold up against practical obstacles—changing environments, shifting throughput demands, feedback from installation and repairs, and the need to run safe, efficient operations without a maze of special processes or hazardous handling. Its blend of processability, field-proven reliability, and end-of-life flexibility puts it at the front of our line for both tried-and-true and cutting-edge assemblies.
Rather than rest on bulk claims or buzzwords, we keep deploying SYLGARD 160 on tomorrow’s problems because we see its results—greater part longevity, easier inspection, fewer service calls, and overall peace of mind when we ship. As a manufacturer, experience has cut through the claims. This material fits the way we work, solves the issues our customers care about, and adapts as technology keeps moving forward.