| HS Code | 300294 |
| Product Name | SILASTIC Liquid Silicone Rubber (LSR) SA 9942-40 |
| Type | Liquid Silicone Rubber |
| Cure System | Platinum-catalyzed addition cure |
| Color | Translucent |
| Shore A Hardness | 40 |
| Viscosity Part A | 27000 mPa·s |
| Tensile Strength | 8.5 MPa |
| Elongation At Break | 480% |
| Tear Strength | 27 kN/m |
| Mix Ratio By Weight | 1:1 |
| Density | 1.13 g/cm³ |
| Typical Cure Temperature | 150°C |
| Typical Cure Time | 5 minutes |
| Compression Set 22h 175 C | 22% |
| Linear Shrinkage | 2.5% |
As an accredited SILASTIC Liquid Silicone Rubber (LSR) SA 9942-40 factory, we enforce strict quality protocols—every batch undergoes rigorous testing to ensure consistent efficacy and safety standards.
| Packing | SILASTIC Liquid Silicone Rubber (LSR) SA 9942-40 is packaged in 20 kg pails, labeled with product name and safety information. |
| Container Loading (20′ FCL) | Container Loading (20′ FCL): 16,000 kg of SILASTIC LSR SA 9942-40 packed in 200 kg drums, 80 drums per container. |
| Shipping | SILASTIC Liquid Silicone Rubber (LSR) SA 9942-40 is typically shipped in sealed, labeled containers to prevent contamination and ensure safety. Containers must be kept upright and protected from excessive heat or freezing. Transportation complies with relevant chemical handling regulations, including proper documentation and hazard labeling if required. |
| Storage | **SILASTIC Liquid Silicone Rubber (LSR) SA 9942-40** should be stored in tightly closed original containers, in a cool, dry, and well-ventilated area away from direct sunlight and moisture. The recommended storage temperature is below 30°C (86°F). Avoid exposure to freezing conditions. Proper storage ensures stable properties and extends shelf life. Keep away from incompatible materials and ignition sources. |
| Shelf Life | SILASTIC Liquid Silicone Rubber (LSR) SA 9942-40 has a shelf life of 12 months when stored below 30°C in original containers. |
SILASTIC Liquid Silicone Rubber (LSR) SA 9942-40 is engineered for critical applications where long-term mechanical stability, precision molding, and environmental resistance are essential. Below are the most widely established downstream industry scenarios, each with specialized manufacturing, compliance, and end-use considerations.
Medical consumables producers utilize LSR SA 9942-40 for injection molding high-precision silicone parts requiring repeated sterilization and biocompatibility. Its low viscosity and controlled curing profile enable intricate cavity filling and demolding for devices that must withstand harsh cleaning protocols while maintaining flexibility and transparency.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Manufacturers of infant care goods specify this LSR grade for bottle nipples, pacifiers, and teether parts due to its durable flexibility, compliance with food contact regulations, and ability to withstand repeated sterilization in household steam or boiling cycles. The absence of plasticizers and resistance to leaching align with demanding international baby product mandates.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Tier 1 automotive suppliers employ LSR SA 9942-40 to mold gaskets, membrane seals, and connector boots for under-the-hood and interior applications requiring permanent elasticity across extreme temperature spans. The compound’s stable compressive set and ability to resist oils and glycol-based fluids support compliance with accelerated aging and emission system durability testing.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
OEMs producing consumer wearables—such as smart wristbands and biometric sensors—specify this LSR for contact skin parts, closures, and vibration dampers given its hypoallergenic profile and ability to maintain soft touch after repeated flexing. Low micro-void content and high transparency support optical sensor windows and signal transmission in compact device designs.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Food service product manufacturers prefer LSR SA 9942-40 to mold baking mats, spatula heads, and heat-resistant kitchen utensils that demand non-stick surfaces and chemical inertness. The material meets strict migration limits and withstands repeated temperature cycling between freezing and oven use without loss of shape or function.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Manufacturers of LED luminaires and photoelectric sensors integrate this LSR for lens and encapsulation applications due to its optical clarity, stable refractive index, and minimal yellowing under UV exposure. It achieves complex, microstructured geometries via transfer- or injection-molded tooling, supporting demanding environmental and heat-aging protocols in critical lighting environments.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Competitive SILASTIC Liquid Silicone Rubber (LSR) SA 9942-40 prices that fit your budget—flexible terms and customized quotes for every order.
For samples, pricing, or more information, please contact us at +8615365186327 or mail to sales3@ascent-chem.com.
We will respond to you as soon as possible.
Tel: +8615365186327
Email: sales3@ascent-chem.com
Flexible payment, competitive price, premium service - Inquire now!
Every day in our production facilities, we tackle the same question that customers ask: How do you make processing smoother, reduce off-spec scrap, and protect your project from delays? Liquid silicone rubber keeps showing up as an answer, and SA 9942-40 is one of the grades that has proven itself on lines from high-volume molding to precision technical parts. Long hours by our production and technical teams go into making sure this material stands up to the pace and pressure of growing industries, especially those with zero margin for error.
SA 9942-40 carries a shore A hardness of 40, giving it a balance that hits the sweet spot for flexibility and mechanical stability. Some grades go softer and start to stretch or show too much give under repeated use; others get too stiff and become difficult to process or fail to seal well under compression. We’ve found that 40 shore A opens up a lot of possibilities for customers looking for automotive parts, electrical connectors, medical seals, or products that need both comfort and toughness.
This is a two-component platinum-cured LSR. Every batch that leaves our plant carries repeatable tear strength and elongation figures. Day in, day out, that consistency helps processors save time on re-tuning production lines and gives end customers confidence in the quality of finished parts—no matter how many cycles run through their molds. In molding shops, this means smoother cavity fill, faster demold, and fewer rejections, which everyone appreciates when cycle time targets stack up.
Some see silicone in general as tricky or finicky. As long-time manufacturers, we know that issues like component separation, pigment dispersion, or variable cure rate can bring a plant to a standstill. For this grade, the flow properties have been fine-tuned to run on modern meter-mix dosing equipment. Flow length and viscosity keep up with thin-walled and multi-cavity tools. Process windows run wide enough that you don’t need to stress about small changes in temperature or shot size causing trouble mid-run.
Crosslink density in SA 9942-40 supports stable release from metal tools, which helps avoid damage, residual flash, or sticky parts that can slow down cycles. This stability means less time chasing down issues through maintenance or troubleshooting rejects on the shop floor.
Old-generation silicone or organic rubbers just cannot keep up under real-world demands for today’s molded parts. Organic materials might start out strong, but they lose flexibility, yellow, or harden quickly under UV, heat, oil, and flame. Medical and automotive applications demand more. The SA 9942-40 handles constant use in harsh environments, repels moisture, stands strong against fuels and oils, and resists biological attack longer than typical elastomers.
Components made from this LSR don’t swell or break down in hot engine compartments, don’t get brittle during autoclaving, and won’t set off allergic concerns in medical or baby care products. Our engineers have seen this material hold its performance in parts that cycle from -50°C to over 200°C, or need multiple sterilizations without distortion.
SILASTIC SA 9942-40 keeps showing its practical side in the field. Our automotive clients value the precise shut-off and long-term compression set resistance in connector seals, sensor boots, and engine grommets. The medical industry relies on this grade for overmolded handles, soft seals, and pump components, thanks to its purity profile and processing ease. Electronics producers find that UL- and FDA-tested LSR stands up to tough insulation and assembly jobs, as it doesn't carbonize or lose dielectric strength even after repeated sterilization or heating cycles.
We work with teams making water purifier spouts, sanitary gaskets, wearable medical devices, and infant feeding products. Every one of those requires both product compliance and the ability to pass repeated sterilization—marks that SA 9942-40 keeps achieving. These stories don’t just come from a sheet of data or a spec line—they come from field service calls, QA reports, and feedback sessions with tier suppliers and direct users. That’s how we know the real test comes in the end-use environment, not just in the first trial batch.
Other liquid silicone grades try to simplify processing, but some still suffer from shelf life issues or batch-to-batch inconsistencies that lead to unpredictable cycles or unacceptable part quality. Our team puts real effort into raw material control—this grade blends seamlessly with standard dosing setups and has an even pigment take-up for clear or colored parts.
Older peroxide-cured systems require extended post-curing to drive off volatiles—which means extra time, energy, and labor. Here, platinum catalysis gives off virtually no byproducts, which eliminates the long, high-temp oven steps and reduces workplace exposure concerns. The jump from peroxide to platinum isn’t just about cycle reduction; it is about making a cleaner, more reliable supply chain for all downstream users, from molder to packager.
Simple elastomers don’t cut it for projects with high requirements around traceability, compliance, or rapid scaling between small and massive runs. SILASTIC SA 9942-40 stands up to supply chain audits—batch traceability systems, lot sampling, and systematic documentation practices. Processors who want to push into closed-loop or automated processes regularly tell us that moving to this LSR enabled them to cut unplanned stops and use automated quality checks. The analytics our plant records for each batch often prove essential when regulatory authorities need evidence for product safety or performance.
As manufacturers, we stand behind the transparency and traceability we offer with every drum. We connect our documentation, batch certificates, and support advice, not from a distance, but from years of troubleshooting and optimizing these lines with real customers. That is what makes long-term partnerships last through both audits and daily operation changes.
Mechanical properties do more than fill out a table. In SA 9942-40, we see real-world toughness that stops parts from tearing at thin cross-sections or splitting in stretch applications. Our customers rely on this grade for critical gaskets, membranes under high cycling, or sensitive bellows in medical tools where a fault means wasted time and resources. The material’s resilience under crush and stretch keeps performance steady, even when molded walls go thin or designs include built-in micro-features or high aspect ratios. These are features where many liquid silicones still come up short.
No business wants to deal with customer returns or recall risks tied to poorly performing seals or connectors. We focus on delivering a product that outlasts the competition in field testing, not just in the lab. That means fewer service calls, lower warranty claims, and more trust in the delivered product.
As industry standards keep rising, every extra step in compliance can slow down product launches or add hidden costs. SA 9942-40 is engineered to meet tight regulatory demands, including RoHS and REACH. Consistently pure, high-clarity elastomer delivers easier compliance paths for applications that need to avoid heavy metals, phthalates, or other restricted substances. Medical and baby care brands benefit—standards like ISO 10993 or FDA 21 CFR typically require supporting documentation and real technical support, which we provide from direct experience, not just from templates or regulatory checklists.
By focusing on raw material stewardship and end-to-end traceability, our teams reduce headaches for downstream processors and OEMs when it comes time for regulatory inspection. Decades spent working with multinational clients, medical device makers, and automotive tier ones hone our ability to spot and solve compliance problems before they appear.
One set formula never fits every project, and real progress comes at the intersection of practical feedback and R&D flexibility. Our technical teams work hand-in-hand with molders and end-users to adapt SA 9942-40 for color, viscosity, or special processing requirements. Sometimes it’s a pigment shift that needs to hold up in automotive interiors; sometimes it's a special additive package for inline vision checks or strong UV resistance in outdoor installations.
Experience shows that speeding up prototype to mass production comes down to material stability batch to batch, and the ability to make micro-adjustments for processing or application-specific needs. We keep open lines with our customers because good LSR requires teamwork between chemical manufacturer, molder, and design engineer—not just an “off the shelf” mindset.
Markets push us every year to keep up with tighter tolerances, more complex part geometry, and regulations that could change overnight. SILASTIC SA 9942-40 has carried products through launches from small-scale specialty medical devices to millions of vehicle sensors a year. Factory data, returned-part inspection, and on-site visits keep us tuned in to how the material behaves when it’s pushed to its limits. That information feeds back to ongoing improvements in compounding, quality checks, and logistics—elements often overlooked by outside observers but vital for project success.
We know time wasted in transition is real cost, and spec changes mid-project demand quick, informed support. Our team of chemists and process engineers keep customer projects moving by offering direct, practical advice instead of scripted phone support. We understand the weight of production deadlines and the hidden demands of compliance, because our own teams live them every day.
A lot of problems customers bring us are universal—venting issues, incomplete filling, or part adhesion concerns show up wherever LSR is used. Through years on line starts, tool changes, and troubleshooting, our crew has found that consistent lot-to-lot flow and rapid cure response give processors the control to minimize material loss and cycle time. Investing in steady compounding and transparency in reporting leads to fewer headaches downstream.
It pays to invest early in direct technical partnership between compounder and part designer. Design tweaks and process adjustments improve success far more than trial-and-error after launch, and with SA 9942-40’s established physical properties, those partnership gains come faster and with less risk than with less-tested materials.
Operators appreciate that LSR like SA 9942-40 does not depend on migratory plasticizers, aromatic amines, or hazardous volatiles. Workers benefit from low-odor, low-mist processing environments—less hassle with workplace exposure controls or odor complaints. Our plant management focuses on clean drum filling, storage stability, and reliable shelf life, so customers can maintain safe inventories without concerns about compound separation or spoilage.
Sustainability no longer sits as a buzzword—it is a business driver. Downstream users value a partner that reduces unnecessary waste, cuts down on secondary finishing, and streamlines end-of-life product handling. Every reduction in process scrap or non-compliance disposal supports the same goal: drive reliable supply, predictable timelines, and successful product launches that balance business results with environmental responsibility.
SILASTIC Liquid Silicone Rubber SA 9942-40 continues to show its worth as today’s industrial pace accelerates. Supporting quality in each drum and standing behind field results get projects complete on time, every time. Our teams wear the same boots and gloves as our customers, and we share the same drive to get the job done right. Whether you build core engine parts, develop medical devices, or supply consumer safety products, the choice of material changes both process success and business outcomes. Our experience—in every batch, on every line—helps meet those challenges and keep customers’ projects running smoothly into the future.