Dow Inc

Products

SILASTIC Liquid Silicone Rubber (LSR) HCE 60-1336

    • Product Name: SILASTIC Liquid Silicone Rubber (LSR) HCE 60-1336
    • Chemical Name (IUPAC): Polydimethylsiloxane
    • CAS No.: 63148-62-9
    • Chemical Formula: C2H6OSi
    • Form/Physical State: Liquid
    • Factroy Site: Yudu County, Ganzhou, Jiangxi, China
    • Price Inquiry: sales3@ascent-chem.com
    • Manufacturer: Dow Inc
    • CONTACT NOW
    VTB
    Specifications
    HS Code 634672
    Product Name SILASTIC Liquid Silicone Rubber (LSR) HCE 60-1336
    Appearance Translucent
    Cure System Peroxide Cure
    Hardness Shore A 60
    Tensile Strength Mpa 8.5
    Elongation At Break Percent 350
    Tear Strength Kn Per M 25
    Density G Per Cm3 1.14
    Compression Set 22h 175c Percent 18
    Rebound Resilience Percent 60
    Typical Processing Methods Injection Molding, Transfer Molding, Compression Molding
    Typical Applications Seals, Gaskets, Electrical Insulators

    As an accredited SILASTIC Liquid Silicone Rubber (LSR) HCE 60-1336 factory, we enforce strict quality protocols—every batch undergoes rigorous testing to ensure consistent efficacy and safety standards.

    Packing & Storage
    Packing **SILASTIC Liquid Silicone Rubber (LSR) HCE 60-1336** is packaged in 20 kg (44 lb) blue steel drums with tamper-evident lids.
    Container Loading (20′ FCL) SILASTIC Liquid Silicone Rubber (LSR) HCE 60-1336 is loaded in 20′ FCL as securely sealed drums or pails.
    Shipping SILASTIC Liquid Silicone Rubber (LSR) HCE 60-1336 is shipped in sealed, labeled drums or pails to ensure product integrity and safety. Containers must be kept tightly closed, stored in a cool, dry place, and protected from moisture and contamination. Standard transport follows local regulations for non-hazardous chemical materials.
    Storage SILASTIC Liquid Silicone Rubber (LSR) HCE 60-1336 should be stored in its original, tightly sealed containers, away from direct sunlight, moisture, and sources of heat. Ideal storage temperature is between 5°C and 30°C (41°F to 86°F). Keep in a well-ventilated, dry area. Avoid contamination, and follow local regulations for chemical storage to maintain product integrity and safety.
    Shelf Life SILASTIC LSR HCE 60-1336 typically has a shelf life of 12 months when stored unopened at or below 30°C.
    Application of SILASTIC Liquid Silicone Rubber (LSR) HCE 60-1336

    Applications of SILASTIC Liquid Silicone Rubber (LSR) HCE 60-1336 in Industrial Manufacturing

    SILASTIC LSR HCE 60-1336 supports advanced manufacturing across automotive, medical, consumer goods, electronics, and kitchenware sectors. This material adapts to highly controlled processing environments, meeting strict regulatory, formulation, and integration needs for complex industrial components.

    1. Medical Device Components

    Major OEMs specify LSR HCE 60-1336 for precision-molded parts in diagnostic, therapeutic, and wearable medical devices. This silicone offers chemical resistance and biocompatibility, supporting rigorous sterilization cycles. Fabricators rely on its stable cure profile for high-volume operations, especially in components requiring consistent mechanical properties and high transparency. Material compatibility with medical-grade pigments and additives allows controlled coloration and traceability.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    2. Automotive High-Temperature Gaskets and Connectors

    Tier 1 automotive system suppliers specify HCE 60-1336 in under-the-hood gaskets, sensor boots, and fluid system connectors. Rubber part fabricators select this silicone rubber for its stable compression set, long-term performance at -50°C to +200°C, and extended service interval requirements. Its compatibility with PA66, PPS, and other engineering plastics ensures reliable overmolding in automated production cells. This grade also supports reduced cycle times in high-throughput settings.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    3. Food Contact and Kitchenware Molding

    Large-scale kitchenware producers utilize this grade to mold utensils, bakeware, and container seals where strict taste and odor neutrality are required. The formulation provides FDA-compliance and high thermal stability, supporting both continuous baking cycles and dishwashing. Masterbatch color systems offer design flexibility without violating food contact norms. The material’s physically non-stick finish supports rapid demolding in multi-cavity tools.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    4. Consumer Electronics Keypads and Sealing Parts

    Electronics contract manufacturers and OEMs specify this LSR for keypad mats, soft-touch switches, and humidity-resistant sealing elements. The formulation offers consistent Shore A hardness and rebound, with resistance to abrasion and chemical sprays common in consumer devices. It supports laser marking and multi-color molding, integrating with automated optical inspection for high-yield production.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    5. Industrial Sensor Housing and Cable Sheath

    Instrumentation and automation suppliers apply this grade in sensor encapsulation, industrial cable overmolds, and connector insulators demanding chemical and UV stability. The material resists oils, fuels, and process chemicals encountered in factory and field settings. Stable dielectric strength at elevated temperatures makes it suitable for applications in harsh electrical environments. Its processing latitude fits with both batch and continuous molding set-ups.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    Free Quote

    Competitive SILASTIC Liquid Silicone Rubber (LSR) HCE 60-1336 prices that fit your budget—flexible terms and customized quotes for every order.

    For samples, pricing, or more information, please contact us at +8615365186327 or mail to sales3@ascent-chem.com.

    We will respond to you as soon as possible.

    Tel: +8615365186327

    Email: sales3@ascent-chem.com

    Inquiry

    Get Free Quote of Dow Inc

    Flexible payment, competitive price, premium service - Inquire now!

    Certification & Compliance
    More Introduction

    SILASTIC Liquid Silicone Rubber (LSR) HCE 60-1336 — Shaping Experience Into Every Batch

    A Manufacturer’s Perspective on Performance, Reliability, and Usability

    Walking through our plant, you might catch the familiar aroma and soft shimmer as batches of SILASTIC Liquid Silicone Rubber LSR HCE 60-1336 finish their cure under precisely controlled conditions. This material stands out for us as producers not only for its dependable performance, but for the way it handles under real production pressures. We developed HCE 60-1336 in direct response to what the manufacturing floor teaches us: partners want speed, flexibility, and long-term consistency. The tools change, customer needs shift, but this LSR gives us room to adapt without headaches.

    Most synthetic rubbers ask you to choose between fast curing, durability, and ease of molding. Our team knows firsthand how dicey that balancing act feels when production runs stack up and deadlines close in. With HCE 60-1336, that compromise simply falls away for many applications. This formulation responds to injection molding with predictable, forgiving behavior, giving clean part lines and quick demolding. Our QC teams routinely track less reject scrap—a little bit less rework, a few hours saved—and the effect ripples across the whole operation.

    Key Specifications That Matter Where It Counts

    It’s easy to paste a table of data from a spec sheet, but living with a compound day to day tells a different story than numbers alone. HCE 60-1336 delivers a balance of 60 Shore A hardness and robust tensile strength that holds up batch after batch. We designed it to handle complex geometries and thin-walled components without short shots or tearing—traits you notice when you’re cleaning molds at shift change, not just reading lab results. Flowability hits a sweet spot: the liquid finds its way into fine details during injection, yet siliconizes fast enough to avoid flash or streaking even as molds run hot.

    We see strong reliability once the curing oven doors shut. Cross-linking locks in mechanical integrity, so finished parts resist permanent deformation over countless cycles. The heat resistance holds steady in environments that see spikes up to 200°C and, in our customer reports, maintains surface quality even after long exposure. Oil and fluid resistance, baked into the polymer backbone, reduces swelling and stickiness—a clear win during extended use in challenging settings.

    Dimensional accuracy is real, not theoretical. We routinely sample parts in-line and trace tolerances. Warping stays minimal, even as wall thickness drops or as parts transition between solid and flexible sections. Whether you’re building medical valves, automotive gaskets, or touch-sensitive keypads, these are the headaches you want to avoid, and HCE 60-1336 delivers by sheer reliability.

    LSR In Use: Processing and Real-World Advantages

    A smooth workflow shapes how a batch performs more than almost anything else. Our technicians charge each shot of HCE 60-1336 with the confidence that the compound will fill even tight, intricate tooling. This pays off when producing complicated seals, connectors, or silicone overmolded parts. Fewer air entrapment issues build trust—not only in the product, but in the process behind it.

    Our decision to use liquid silicone in this grade comes from long stretches with other options—addition-cure systems, different polymer blends, or even organic rubber. HCE 60-1336 beats many legacy approaches by flowing easily into automated dispensing and metering setups that define modern manufacturing. Higher throughput numbers, smaller setup changes between runs, and cleaner equipment after shutdown aren’t details; they are a daily reality. Frequent tool changes become less stressful, since there’s no fighting residue or wasting time cleaning up gels and stickiness that plague lesser options.

    Environmental control in our facility tracks directly to product quality. Temperature swings in older buildings used to cause headaches with traditional heat cure elastomers. We built LSR HCE 60-1336 with a wide process window so shifts in shop conditions don’t throw off cure rates or yield. That buffer means uptime climbs, and fewer batches wind up reworked due to under- or over-curing. For customers installing their own lines, those same safety margins mean less fiddling and faster ramp-ups.

    Handling and Health: Experience Guides the Formulation

    Years in the industry have taught our teams that ease of handling is as critical as raw performance. We blended HCE 60-1336 so it moves cleanly from drum to meter-mix units. Operators report little odor, almost zero vapor, and minimal risk of irritation with proper PPE. That’s not a side benefit—it drives better morale and lower staff turnover, while letting experienced hands focus on operations, not emergency shutdowns. We routinely hear from partner plants that the product’s low viscosity helps during bulk transfers, speeding up lines and reducing waste.

    Where other elastomers force costly cleanup steps or generate more VOCs and byproducts, this grade keeps secondary emissions in check. For businesses staying ahead of tightening health and safety standards, these details shift from wish-list items to hard requirements. We verify every batch, both in-house and through trusted independent labs, to make sure the finished parts have the biocompatibility, low cytotoxicity, and safety needed for healthcare and food-contact use cases.

    Why LSR HCE 60-1336 Stands Apart From Other Silicone Rubbers

    We’ve formulated, poured, and processed just about every silicone and rubber option across the years. What separates HCE 60-1336 is the work behind the scenes—it’s not just chemistry, but the constant back-and-forth between our R&D team, production line, and the people who use the material daily. Rather than chasing labs for sample after sample, our focus turns toward reliable production at volume.

    Other elastomers—high-consistency rubber blocks or basic LSR—struggle when asked for fine detail, thin membranes, or rapid cycles demanded by two-shot overmolding. HCE 60-1336 slots right into those gaps, carrying over deeper pigment dispersion and even surface textures that competitors find tough to match. That matters most in markets where appearance can never slip, like consumer electronics or visible automotive trim.

    Traditional two-part silicone rubbers often bring strict ratio requirements and finicky mixing, but with HCE 60-1336, you notice reduced shearing, calmer mixing, and far fewer batch-to-batch surprises. Our quality engineers see steady rheology checks and sharp gel times through full tank loads—small differences that, on larger campaigns, save thousands by preventing rejects. Each improvement stacks up to something real at scale: fewer interventions, more predictable outputs.

    Applications: From Everyday Use to Critical Components

    Our production shifts often see the range of customers who rely on LSR’s unique characteristics. Teams molding medical parts appreciate that HCE 60-1336 holds its dimensions and resists surface tack, leading to easier demolding and reliable part release. In automotive work, suppliers lean on its resistance to brake fluid, engine oils, and long-term vibration. Electronics manufacturers cite the repeatable surface finishing achieved for keypads, touchscreen gaskets, and LED encapsulation, where clarity and tactile feedback can’t take a back seat to chemical stability.

    The flexibility of this compound means it carries its weight across vastly different sectors, without forcing end users into tricky post-processing or specialty tooling. Rapid prototyping firms call out the time they save not having to tweak cure schedules between batches or swap whole process lines for new geometries. With less stress around reactivity, design teams can stretch membrane thicknesses, reinforce undercuts, or shift venting features with minimal risk.

    Working with customers as partners—not simply buyers—gives us a head start. We tune lot consistency so major consumer and medical device brands avoid shifts in part appearance or feel, even as designs evolve. Keeping those details under tight control costs us more in process monitoring and QC runs, but pays off tenfold by building long-term trust. We encourage project leads and shop supervisors alike to dig in, try custom pigment packages, or specify medical and food-grade batches, without overhauling backend supply lines.

    Driving Sustainable Practices Through Material Choice

    Nobody escapes the pressure to cut waste. Rising material costs—and the net environmental costs—push factories to rethink usage from intake drums to final shipment. In our experience, switching to HCE 60-1336 leaves less left over after a campaign. Shorter flush cycles during grade changeover not only drop water and energy usage, but also mean less finished good lost to the purge. Improved shelf stability stretches storage life so less product spoils before ever seeing a mold.

    Silicones build their case for sustainability with durability. HCE 60-1336’s resistance to tearing, weather, and chemical attack eliminates early failures. We’ve watched customer maintenance intervals stretch out over the past decade, with less frequent line stoppages and longer intervals between seal changes on real equipment. In food processing, healthcare, and industrial automation alike, that means less material headed for the landfill and more uptime for every dollar invested in tooling.

    Waste audits with high-volume partners turned up smaller footprints compared to organic-based rubbers. We attribute much of this to reduced secondary curing, tighter process windows, and slower rate of in-field degradation. The parts molded from our LSR rarely crumble, dry out, or lose elasticity from ozone or heat the way other compounds do after long exposure. For customers balancing operating costs against regulatory and ESG targets, these are not trivial shifts—they represent years of cost avoidance.

    Real Solutions For Scaling and Process Optimization

    High-speed manufacturing demands predictability just as much as it does speed. With HCE 60-1336, we see cycle times drop and final yield climb, especially in process-automated shops. Rapid press cycles pair up with robust part definition, letting lines run hot without edge bleed or stuck parts. We often run comparative tests in our own facility, head-to-head with older elastomer grades, and watch both tool longevity and part consistency swing solidly in favor of this product.

    Maintainers and line managers benefit as much as mold techs. Downtimes shrink, as sealing surfaces hold up through repeated cycles, and the softer compression set means less troubleshooting leaks on assembled equipment. Our teams track mean time between failures and warranty returns for every new application. Patterns across customer lines confirm reduced complaints, leading to broader adoption—from start-up robotics shops through established carmakers and medtech players.

    Where customization matters, we step in with tailored support—not one-size-fits-all ratios, but real engineering in pigment selection, surface finish, and automated dosing. Customers turning out multi-color or soft-touch finished goods particularly notice how pigment dispersion stays true between batches, and how rapid mixing never triggers phase separation. Our lab feedback loop blends hands-on testing and accelerated aging so that every shipment performs as demanded, every time.

    Considerations for Critical and Regulated Markets

    Meeting regulatory and customer requirements defines our job. For medical and food applications, we certify each batch against established standards for biocompatibility, purity, and extractables—never as an afterthought, but as part of our core promise. We go beyond basic lot traceability; retention samples from every run undergo continual spot testing, and our teams work directly with customers’ compliance staff to streamline audits.

    Feedback from assembly plants reveals another benefit: the material’s resilience in sterilization. Autoclaving, gamma, or ETO cycles don’t degrade surface appearance or mechanical values. In medical tubing and valves, LSR HCE 60-1336 reduces sticking, tearing, or blemishes even under harsh reprocessing. These advantages open doors in minimally invasive device components, as well as in sanitary dispensers and peristaltic pump seals, where hygiene can’t be traded off for lower costs.

    Electronics and automotive teams also find assurance in the material’s ability to withstand extended aging. Long-term exposure to fluids, grease, and UV rarely shifts part color or tactile response. Customers with stringent lifecycle testing mark fewer returns due to yellowing, hardening, or fractures at sharp bends. Durable, soft-touch surfaces stay that way deep into multi-year service life, building brand value for device makers.

    Challenges, Experience-Driven Adaptations, and Solutions

    No compound solves every problem out of the box. We meet plenty of process engineers who remember older one-part or peroxide-cured rubbers that cooked poorly, stuck in vents, or failed too soon from shrinkage. Our approach with HCE 60-1336 funnels lessons learned from those headaches—faster mold release, longer open times, and sharp cure on thin-featured parts for high-pressure processes.

    Certain tooling geometries or high-cavity molds can expose differences between elastomers where flow or de-airing falls short. To smooth these transitions, we’ve refined the viscosity profile of HCE 60-1336: not so low that filling overruns vents, not so high that corners come out misshapen. Direct feedback from molding techs lets us dial in cure rates, sometimes tweaking soap content or adding flow aids, to keep pace with the fastest lines.

    Tool life matters as much as speed. Where abrasive fillers would reduce cavity lifespan, our formula relies on cleaner base stock and fine-tuned cross-linkers. Over time, fewer pits and trapped flash show up inside tools, and cleaning cycles get quicker. Long-term data from high-volume users show average tool life climbing without loss in part surface quality. Advances in pigment compatibility extend these benefits: less hue drift, sharper color, and no bleed after post-cure—even under repeated sanitization.

    Training support gives us another lever as partners. We bring in application engineers who actually work the line. Practical knowledge on dosing, mold preparation, and shutdown routines close process gaps faster than theoretical guides ever could. Feedback shared between plant crews and our own technical teams feeds right back into the manufacturing loop. If a batch runs thicker than planned, or post-cure exposes a flaw, we don’t pass the buck; we dig in, trace the root, and adjust formulations if warranted. Experience, not guesswork, shapes each shipment.

    Future Opportunities, R&D, and Technological Integration

    Innovation only means something if you can turn a lab win into reality at industrial scale. HCE 60-1336 gives us a foundation for broader advances—hybrid elastomeric blends, self-lubricating surfaces, and evolving process monitoring links. As smart manufacturing and data-driven oversight reshapes the factory floor, the consistency and predictability of our silicone systems become the bedrock for automated dosing and closed-loop quality feedback.

    We work side by side with technology partners to adapt LSR HCE 60-1336 for connected production. Integrating sensors and in-line viscosity checks helps catch deviations before scrap accumulates. Engineers get surprised how little tuning new hardware needs before the solution fits, whether on short pilot runs or eight-week, round-the-clock campaigns. Adaptability in formulation supports projects moving from low to high volume, or from prototyping to regulatory-certified mass production.

    Feedback from field tests—especially for electric mobility and edge computing hardware—directly shapes our research investment. In the pipeline, projects look at improving fire retardancy, enhancing clarity, or adapting for bonding in hybrid assemblies with metals or plastics. All this comes back to our core goal: building a line of materials that solve today’s problems, but leave room for tomorrow's breakthroughs.

    The Value of Manufacturer Partnership

    Looking back, it’s the collaboration with customers and hands-on teams that keeps HCE 60-1336 ahead of the curve. As a manufacturer, we do more than supply elastomer in a drum. We partner in root cause investigations, trial runs, and continuous improvement programs. Design is never static. Needs and pain points shift, whether in consumer markets or precision medical systems.

    With every shipment, every process tweak, and every shared engineering challenge, we layer more experience into the finished product. Standards for appearance, mechanical performance, and regulatory fit grow tighter by the quarter. Our continuing investment in process control, batch consistency, and technical training isn’t driven by marketing—it comes from seeing, day in and day out, how reliable material choices shape production, efficiency, and growth.

    SILASTIC LSR HCE 60-1336 represents more than a model number on a list. It's the result of sweat equity, technical learning, and tuning across every stage of manufacture and application. Our commitment as a manufacturer stays rooted in the real world: delivering resilient, adaptable, and tested silicone—batch after batch, year after year.