| HS Code | 705615 |
| Product Name | DOWSIL Silicone Additive 57 |
| Chemical Type | Silicone-based additive |
| Appearance | Clear to slightly hazy liquid |
| Color | Colorless to light amber |
| Specific Gravity | 0.980 - 1.010 at 25°C |
| Viscosity | 10 - 30 cSt at 25°C |
| Flash Point | > 100°C (Closed Cup) |
| Solubility | Dispersible in water, soluble in alcohols |
| Recommended Usage Level | 0.05 - 1.0% by weight |
| Primary Application | Flow and leveling agent for coatings and inks |
As an accredited DOWSIL Silicone Additive 57 factory, we enforce strict quality protocols—every batch undergoes rigorous testing to ensure consistent efficacy and safety standards.
| Packing | DOWSIL Silicone Additive 57 is packaged in a 18 kg (40 lb) steel drum, labeled with product details, safety, and handling instructions. |
| Container Loading (20′ FCL) | **Container Loading (20′ FCL):** DOWSIL Silicone Additive 57 is typically loaded as 160 steel drums (200 kg each) per 20′ FCL container. |
| Shipping | DOWSIL Silicone Additive 57 is typically shipped in sealed, original containers to maintain product integrity. Common packaging includes drums or pails. The product should be stored and transported upright in cool, dry conditions. Ensure compatibility with transport regulations and protect from direct sunlight, extreme temperatures, and moisture during transit. |
| Storage | DOWSIL Silicone Additive 57 should be stored in tightly closed original containers, in a cool, dry, and well-ventilated area away from direct sunlight and incompatible materials. Storage temperatures should ideally be kept between 5°C (41°F) and 35°C (95°F). Avoid freezing the product. Keep away from sources of ignition and ensure proper labelling for safety compliance. |
| Shelf Life | DOWSIL Silicone Additive 57 has a shelf life of 24 months from manufacture date when stored in original, unopened containers. |
DOWSIL Silicone Additive 57 finds broad adoption in high-value industrial manufacturing, where formulators rely on it to resolve critical surface and process challenges. Below are detailed scenarios by downstream production sector, with attention to process sequence, compliance benchmarks, quantitative guidance, and real-world end use.
In the formulation of waterborne paints for metal, concrete, and plastic substrates, this additive improves surface leveling, mar resistance, and defoaming without negatively impacting gloss or adhesion. Coating producers adjust incorporation levels depending on substrate porosity and batch rheology, integrating the additive at the pigment dispersion or letdown stage to maintain consistent wetting and low surface defects, ensuring coatings meet rigorous indoor and exterior performance tests.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
DOWSIL Silicone Additive 57 is incorporated by ink manufacturers seeking to control surface slip, prevent blocking, and suppress microfoam on flexographic and gravure presses. The additive is favored for low-migration packaging applications due to its negligible VOC contribution and minimal impact on color strength, entering during the color concentrate or final ink blending phase where exact dosage reflects viscosity, press speed, and print substrate absorption.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Furniture and parquet producers rely on this additive’s surface wetting capabilities to reduce brush marks, enhance anti-cratering, and boost clarity in clear and pigmented waterborne finishes. Integration occurs during the finish base stock blending stage, with adjustment for wood species, finish thickness, and drying regime, and formulating in line with US and European emissions and performance regulations.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Producers of waterborne pressure-sensitive adhesive tapes and labels use this additive to improve substrate wetting and prevent mud cracking during film formation. Formulators match additive concentration to resin type and adhesive film thickness, incorporating it at the pre-emulsification stage or during post-polymerization blending, and sampling for adhesive transfer and anti-blocking characteristics to meet industry-standard adhesion and migration requirements.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Textile finishing plants adopt the additive for technical and performance textile coatings, enhancing wetting and reducing surface tension to prevent streaking and pinholing, especially in high-speed pad and gravure applications. PQC protocols address migration and residual content in compliance with sector-specific textile and human health standards, with adjustment for textile fiber, coating rheology, and drying method.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
OEM automotive paint shops integrate this additive to attain finely leveled, defect-free waterborne basecoats and clearcoats, improving substrate wetting on both metal and composite car body components. Strict automotive quality standards drive real-time control of surface smoothness and reflectivity, with the additive entering during post-mill mixing or final letdown to balance flow, prevent cratering, and avoid paint system incompatibilities.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Competitive DOWSIL Silicone Additive 57 prices that fit your budget—flexible terms and customized quotes for every order.
For samples, pricing, or more information, please contact us at +8615365186327 or mail to sales3@ascent-chem.com.
We will respond to you as soon as possible.
Tel: +8615365186327
Email: sales3@ascent-chem.com
Flexible payment, competitive price, premium service - Inquire now!
As a chemical manufacturer who handles the cradle-to-delivery process for specialty silicone additives, I’ve watched the market fill up with a confusing array of options. Our DOWSIL Silicone Additive 57 stands out for a simple reason: it delivers performance benefits for coatings and ink formulations that you can see and measure, even before the final application hits the product line.
Unlike many surface additives that claim broad usage without backing it up, DOWSIL Silicone Additive 57 comes off the reactor with a clear purpose. It's a polyether-modified silicone, formulated to impart slip and increase surface smoothness, while keeping issues like foam and cratering in check. In my experience, formulators using solventborne, waterborne, or UV-curable coatings need these kinds of reliable properties—which can only come from a process rooted in technical consistency.
We build DOWSIL Silicone Additive 57 from scratch, using traceable raw materials and carefully controlled process steps. Silicone chemistry rewards attention to detail: the wrong catalyst ratios, uncontrolled moisture, or minor pH drifts leave their evidence in batch inconsistencies and, ultimately, underperforming end-products. Over 20 years, we’ve refined a process that catches these variables before they become problems for our customers. Each lot meets strict viscosity, refractive index, and clarity targets. None leaves the plant without batch-specific data.
Manufacturing direct offers clear feedback—when a customer calls about anti-blocking performance in a high-gloss ink, we don’t rely on guesswork or hearsay; our technical team examines samples, checks process parameters, and adjusts if needed. This hands-on approach brings a level of transparency and accountability not found in just buying and reselling.
Surface tension control sits at the heart of successful waterborne and high-solid acrylic coatings today. Some additives promise “universal compatibility” but introduce tradeoffs: loss of transparency, greasy feel, or process foaming. With DOWSIL Silicone Additive 57, we formulated for balance—reducing surface tension enough to promote substrate wetting and pigment orientation, without destabilizing other critical properties.
In coil coatings and can coatings, the additive enables smooth, defect-free layers. Our clients report fewer fish-eyes and smoother laydown at both low and high line speeds. This stems not just from the core formula, but from precisely monitored batch-to-batch consistency. During pilot tests with water-based overprint varnishes on high-speed flexo lines, customers found improved leveling at reduced addition rates compared to generic silicone oils, indicating not just efficacy but economic value.
Not all silicone additives are created equal. Some products add too much slip, turning the coating surface tacky or dust-attracting. Others interact poorly with certain resin systems or pigments. In production, we calibrate each batch to a narrow molecular weight range, controlling the balance between surface tension modification and compatibility. This approach curbs foaming and maintains film clarity—especially critical for electronics coatings and packaging films.
The product’s architecture, blending polyether side chains with the silicone backbone, tailors its partitioning at the air-film interface. This reduces localized concentrations that might otherwise cause cratering. It means more uniform wetting and gloss, even at the low addition levels often necessary for high-value applications.
As a manufacturer, we don't just read the datasheet; we track how the product responds in-line at customer plants. One paint processor, running an automated mixing and coating system, confronted recurring pinholing with a generic additive. Field tests with DOWSIL Silicone Additive 57 dropped defect rates near zero, with no change to their existing process conditions. Our facility monitored samples from both pilot and full production runs, correlating batch performance with field feedback—not just QA checks divorced from real usage.
Silicone additives only work as intended when their critical parameters hold steady. DOWSIL Silicone Additive 57 exits production with a clear-to-hazy liquid appearance, offers low viscosity for direct incorporation in most coating systems, and carries a specific gravity that ensures easy dosage calculations. Since this additive mixes well at low concentrations, it fits processes using high-shear mixing or simple stir-in blending, with no gels or precipitates forming over recommended storage conditions.
QC checks include viscosity (using ASTM methods), refractive index, color (APHA), turbidity, and long-term stability in standard packaging configurations. We routinely retain control samples for 2-year shelf life monitoring, as many end-users operate with extended supply chain timelines.
Based on our lab and field evaluations, DOWSIL Silicone Additive 57 works at 0.05%–0.5% by weight for most solventborne and waterborne coating systems. Some customers working with thin-gauge polymer films push lower addition rates, with performance holding steady thanks to high surface activity. We guide customers to start low, then work up only as needed—preventing overuse that can trigger surface “slickness,” floating, or influence recoatability.
For UV-curable systems, a similar range delivers slip and mar resistance without disturbing cure response or clarity. During roll-to-roll production, this matters—surface defects can bring entire runs to a halt, so preventive modification makes for smoother lines. Thermoforming and post-conversion steps proceed without the blocking or surface deformation sometimes seen with off-spec, high-volatility additives that we’ve seen poorly controlled suppliers put out in the market.
Customers look for more than just physical performance now. Regulations around VOC content, extractables, and migration create stricter boundaries for formulators—especially in packaging, food contact, and children’s products. Our production process, raw materials choice, and downstream QC all reflect this reality. DOWSIL Silicone Additive 57 contains no intentionally added heavy metals, organotin, or halogenated compounds; we back that up with both batch documentation and, on request, third-party testing.
We routinely monitor REACH and other international frameworks as part of our compliance process. Customers demand documentation that goes beyond a basic MSDS; we supply full regulatory dossiers, supply chain traceability, and application guidance drawn from both internal R&D and customer feedback loops spanning years, not months.
Lab blends offer one perspective on additive performance, but the real challenge comes with scale-up. A surface additive that behaves in 50 ml blends often shows issues in 5,000-liter plant tanks: incomplete mixing, separation, or variable effect at the line’s edges. Testing each DOWSIL Silicone Additive 57 batch for these realities has shaped our manufacturing adjustments over time—we fine-tuned mixing protocols and batch size scale, along with QC checkpoints aligned with actual field parameters.
Over time, we’ve seen customers implement the additive in clear wood finishes, pressure-sensitive adhesive topcoats, automotive refinish applications, and more. The most frequent feedback after transition revolves around fewer customer complaints about visual defects—meaning less rework, less waste, and improved brand reputation downstream. These benefits show up both in the data and the feedback from coatings line operators, not just on the corporate spreadsheets.
Real production means troubleshooting: line stops, batch recalls, last-minute reformulation. As manufacturers, we field questions daily from application engineers and quality managers trying to pare back the noise between “on spec” and “works in the real world.” DOWSIL Silicone Additive 57 benefits from this dynamic: we feed lessons learned straight back to R&D, skipping layers of miscommunication common with products passed through intermediaries.
Our technical support does not end at the datasheet. We analyze failed field samples, replicate issues in the lab, and iterate based on rigorous root-cause analysis. By controlling both the formulation and the process, we help customers troubleshoot everything from pigment float to subtle gloss drop-off after aging.
Working across industries, we see patterns in challenges formulators face. In UV-cured overprint varnishes, heat and shear stress often lead to loss of gloss or, in some cases, surficial foaming. DOWSIL Silicone Additive 57 delivers optimal flow and wetting, reducing surface and jetting defects. With waterborne wood coatings, the issue swings toward foam stability and surface drag. Here, the low addition rate and compatibility profile curb these problems, even with newer resin chemistries coming onto the market.
Environmental conditions—humidity swings, temperature extremes, and manufacturing for global distribution—also stress additive choices. By engineering stable performance across these ranges, we hedge against the unpredictability our customers face year-long. Our manufacturing process itself builds in redundancies: climate-controlled storage, batch documentation dating back five years, and formula tweaks based on seasonal trends. So the additive performs just as well in Shanghai’s humid summer as it does in a dry Midwestern January.
Coatings engineers, QA managers, and plant operators often give the most honest feedback. After trialing DOWSIL Silicone Additive 57, coatings plants that once saw daily rework due to micro-defects now run longer shifts with fewer interruptions. Smaller shops using manual mixing setups, not automated feed systems, report less clogging and consistent surface results, saving both labor and raw material cost.
Ink formulators call out that switching to DOWSIL Silicone Additive 57 cut their surface “ragging” defects, sometimes by half. One specialty film converter said visual clarity and print registration consistency improved enough to help retain two key contracts in flexible packaging. These stories return in our weekly technical discussions, shaping both batch oversight and formula tweaks.
As global supply chains pressure manufacturers to prove origin and sustainability, chemical producers can’t ignore the increasingly fine-grained demands from industrial clients. Each run of DOWSIL Silicone Additive 57 pulls documents on raw materials, energy consumption, and waste minimization. Process solvents are recovered and re-used as much as feasible; byproducts follow an established separation and disposal protocol.
Customers care about green chemistry, not just the promise, but the evidence: reduced hazardous byproducts, lower energy input during manufacturing, and streamlined packaging. Our facility has adopted bulk packaging for high-volume customers, shrinking drum waste. DOWSIL Silicone Additive 57, with its low addition rate, further cuts down cumulative chemical load without giving up any of the critical surface properties customers expect.
Many additives reach the market through trading houses rebranding mass-produced goods. Our factory’s direct involvement keeps the learning cycle short and sharp. When a customer running a high-speed gravure line in MENA flagged repetitive fisheye issues, we fast-tracked both an internal investigation and a custom batch. Testing confirmed a subtle interference with one pigment supplier; our lab adjusted the formula, shared the outcome, and documented both the problem and solution in our database. That kind of rapid problem-solving roots the value of manufacturing at source.
Technical depth comes from this loop—raw material science, process management, and end-user insights. Each informs the other, creating a feedback system that closes the gap between theory and performance. Through direct manufacturing, we respond faster and with more authority to shifts in global regulatory guidance, market trends, or downstream technical hurdles. Every specification tweak shows up in the end-use application, and we witness the impact up close.
Markets do not stand still. As new resins, pigments, and curing systems enter the mainstream, surface additives must keep pace. Our workers drive process improvement on the plant floor, collaborating with R&D to rethink both formulation and process design. Trials underway focus on next-generation coatings demanding even lower VOC profiles and compatibility with bio-resins—each adjustment logged, tracked, and, when ready, rolled out for customer testing.
DOWSIL Silicone Additive 57 reflects this ongoing commitment, offering strengths derived from years of hands-on experience coupled with real-world feedback. As customers tune and stretch their formulations for more demanding markets, we’re adapting, tweaking both the performance envelope and the reliability of supply.
From the perspective of the production team and technical support staff shaping each batch of DOWSIL Silicone Additive 57, the true barometer of value lies in how well the additive performs shelf-to-surface, lab-to-plant. Every lot, every specification adjustment, and every customer call feed back into a process dedicated to more than meeting the baseline. Direct manufacturing brings clarity, accountability, and an unfiltered connection to the realities behind every lab sample and production run. Our experience bears out in each success story and in each technical challenge resolved, carving a steady path for DOWSIL Silicone Additive 57 in the world’s coatings and ink formulations.