Dow Inc

Products

VORASURF PU Silicone Surfactant / Additive DC 5950

    • Product Name: VORASURF PU Silicone Surfactant / Additive DC 5950
    • Chemical Name (IUPAC): Poly(dimethylsiloxane), alpha-(3-(trimethoxysilyl)propyl)-omega-hydroxy-
    • CAS No.: 63148-57-2
    • Chemical Formula: C12H38O5Si7
    • Form/Physical State: Liquid
    • Factroy Site: Yudu County, Ganzhou, Jiangxi, China
    • Price Inquiry: sales3@ascent-chem.com
    • Manufacturer: Dow Inc
    • CONTACT NOW
    VTB
    Specifications
    HS Code 875525
    Product Name VORASURF PU Silicone Surfactant / Additive DC 5950
    Chemical Type Silicone-based surfactant
    Physical Form Liquid
    Color Clear to pale yellow
    Odor Mild
    Specific Gravity 1.0 (approximate at 25°C)
    Viscosity 250-800 mPa.s at 25°C
    Solubility Dispersible in polyols
    Application Polyurethane foam production
    Flash Point >100°C (estimate, closed cup)
    Stability Stable under recommended storage conditions
    Shelf Life 12 months (unopened, typical)
    Storage Temperature 10°C to 30°C
    Recommended Dosage 0.7 - 1.5 parts per hundred polyol (php)

    As an accredited VORASURF PU Silicone Surfactant / Additive DC 5950 factory, we enforce strict quality protocols—every batch undergoes rigorous testing to ensure consistent efficacy and safety standards.

    Packing & Storage
    Packing VORASURF PU Silicone Surfactant DC 5950 is packaged in a 200 kg blue steel drum with secure sealed lid.
    Container Loading (20′ FCL) Container Loading (20′ FCL) for VORASURF PU Silicone Surfactant / Additive DC 5950: 80 drums per container, 200 kg/drum.
    Shipping **VORASURF PU Silicone Surfactant / Additive DC 5950** is shipped in tightly sealed, labeled containers, typically 200 kg drums or 1,000 kg IBC totes. It should be transported in an upright, secure position, protected from moisture and extreme temperatures, and compliant with all relevant chemical transportation regulations.
    Storage VORASURF PU Silicone Surfactant / Additive DC 5950 should be stored in tightly closed original containers in a cool, dry, and well-ventilated area. Keep away from direct sunlight, heat sources, and incompatible materials. Ensure containers are properly labeled and protected from physical damage. Follow local regulations and safety data sheet (SDS) recommendations for safe handling and storage practices.
    Shelf Life VORASURF PU Silicone Surfactant / Additive DC 5950 typically has a shelf life of 24 months when stored in unopened containers.
    Application of VORASURF PU Silicone Surfactant / Additive DC 5950

    Applications of VORASURF PU Silicone Surfactant / Additive DC 5950 in Industrial Manufacturing

    As the original manufacturer, we supply VORASURF PU Silicone Surfactant / Additive DC 5950 to key polyurethane (PU) industries requiring strict control over cell structure, surface performance, and foam quality. This advanced silicone surfactant is integral in downstream PU systems where certified, high-specification formulations demand consistent foam properties and manufacturing reliability. Explore practical industrial scenarios highlighting exact use requirements.

    1. Flexible PU Foam for Furniture Upholstery

    Large-scale furniture and mattress producers formulate flexible PU foam blocks using our silicone surfactant to regulate cell openness, improve air permeability, and stabilize foam dimensions. Production lines often require precise addition to balance comfort, density, and fire resistance needs set by regional manufacturing codes.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    2. Rigid PU Foam for Thermal Insulation Panels

    Manufacturers of rigid PU foam panels for construction and refrigeration employ this surfactant to manage cell uniformity and closed-cell content, which directly affects thermal conductivity, mechanical compression, and moisture barrier performance under strict building regulations.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    3. Automotive Integral Skin PU Foam Production

    Automotive OEMs and tier-1 suppliers utilize this surfactant to control integral skin PU foam molds for steering wheels, armrests, and instrument panels, addressing requirements for microcellular surfaces, abrasion resistance, and low-VOC emissions to meet international vehicle safety and materials directives.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    4. PU Slabstock Foam for Packaging and Acoustic Isolation

    Industrial slabstock foamers supplying packaging inserts and acoustic dampening materials rely on this surfactant to achieve consistently open cells, predictable compressibility, and uniform density distribution, especially critical for die-cut applications in electronics and instrument case manufacturing.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    5. Molded High-Resilience Foam for Bedding and Seating

    Specialty foam molders in bedding and ergonomic seating deploy this surfactant to ensure elastic cell structures, rapid demolding, and tailored support zones. Achieving uniform resilience and permanent set resistance is critical for premium mattress tops, theater seating, and aviation seat production.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    6. Spray Polyurethane Foam (SPF) for Building Insulation

    Professional SPF contractors use our silicone surfactant to optimize spray characteristics—foam rise, expansion rate, and closed-cell formation—for interior wall, roof, and cavity insulation, balancing demands for adhesion, continuous coverage, and low-energy loss set by modern energy codes.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    Free Quote

    Competitive VORASURF PU Silicone Surfactant / Additive DC 5950 prices that fit your budget—flexible terms and customized quotes for every order.

    For samples, pricing, or more information, please contact us at +8615365186327 or mail to sales3@ascent-chem.com.

    We will respond to you as soon as possible.

    Tel: +8615365186327

    Email: sales3@ascent-chem.com

    Inquiry

    Get Free Quote of Dow Inc

    Flexible payment, competitive price, premium service - Inquire now!

    Certification & Compliance
    More Introduction

    Introducing VORASURF PU Silicone Surfactant / Additive DC 5950

    Understanding DC 5950 from a Manufacturer’s Perspective

    Producers of polyurethane foams see all sorts of challenges across applications, from rigid insulation panels to soft slabstock. We have spent years in the laboratory and on the line learning about the impact different surfactant structures have on foam formation, cell size control, and physical properties. There’s no substitute for hands-on work with raw silicone polymers, siloxane backbones, and finely-tuned side groups. After field-testing multiple generations of silicone additives, VORASURF PU Silicone Surfactant / Additive DC 5950 stands out for what it accomplishes in both the box foaming room and the continuous line.

    We designed DC 5950 silicone surfactant to solve common real-world foaming issues that basic legacy surfactants rarely fix. In slabstock manufacturing, fine cell structure often slips out of control, leading to uneven compression profiles and subpar comfort. Rigid formulations sometimes collapse or lack consistency because bubbles coalesce instead of stabilizing. Hydrophobic and hydrophilic balance in the surfactant structure becomes critical. Our teams have modified the siloxane-polyether copolymer sequence in DC 5950 to deliver reliable nucleation and cell stabilization across both flexible and rigid foam chemistries.

    In our experience crafting thousands of tons each month, not all surfactants behave predictably once mixed with isocyanate, blowing agents, and polyols. Some additives bring across batch-to-batch drift or react badly to humidity shifts on the shop floor. With DC 5950, our manufacturing engineers focused on robust quality control and narrow specification limits, resulting in stable viscosity, homogenous mixing, and no sedimentation seen even during colder warehouse storage. This brings operators peace of mind—no delays, no reformulations caused by odd surfactant batches from run to run.

    DC 5950 Functionality Across Applications

    On the slabstock side, the key target lies in producing a fine and regular cell structure, which directly contributes to improved foam durability and cushioning comfort. In our own slab testers, we observe DC 5950 forming closed, even cells, minimizing air entrapment and preventing large cell collapse. It delivers consistent block rise, neat edges with almost zero waste, and finished foam that cuts cleanly. Machine operators have come to rely on its forgiving nature—DC 5950 allows for a broader water content range and reduced risk of costly batch scrapping because pouring results stay consistent.

    Rigid foam makers care about two things—optimal lambda value for insulation, and mechanical stability over time. We fine-tuned DC 5950’s siloxane content to steer foam expansion while controlling open vs. closed cell ratios. In our trials across PIR, appliance foams, and continuous sandwich panels, we see sealed cells that trap blowing agents efficiently and keep k-factors from drifting upward during storage aging. DC 5950 tolerates fluctuating temperature and humidity conditions in most plants, so there’s less guesswork when environmental controls aren’t perfect.

    When foamers push for higher flame retardancy or reduce volatile organic compounds (VOC), some surfactants falter and cells lose integrity. Our experts routined full sets of fire performance and emissions tests with DC 5950 in both halogenated and halogen-free flame retardant packages. The surfactant delivers clean burning curves and low fogging without promoting yellowing or odor—critical for mattress and automotive cabin foam producers supplying direct to international brands.

    Technical Insights and Data from Manufacturing

    From a manufacturer’s standpoint, quality assurance isn’t only about meeting datasheet numbers. Each drum leaving our factory is sampled for viscosity (measured at 25°C), moisture content, and active ingredient level. DC 5950 consistently hits a viscosity in the low hundreds of centipoise, meaning it pours with ease and disperses well in polyol blends even at high production speeds. Our batch logs show less than one percent deviation in physicochemical properties across lots. These tight controls reduce off-quality foam and save processors time and money on troubleshooting.

    For those running high-density, high-resilience (HR) foam grades, DC 5950 delivers precise control over cell uniformity without gassing or excessive surfactant demand that would balloon costs. As a liquid concentrate, it meters well via gear pumps or manual addition, and it doesn’t prompt unwanted side reactions with tin or amine catalysts in the polyol stream. Foam lines handling both polyether and polyester chemistries have validated it under continuous operation for over 48 hours with no sediment, phase separation, or equipment cleanliness problems. This comes from our internal focus on keeping metallic and ionic impurities out of every batch, which also makes DC 5950 a steady performer during scale-up or process transfers.

    Each application raises different needs. Automotive headrest foundries require strong foam that still feels supple. We’ve formulated DC 5950 to resist aging and physical breakdown, even under humid tropical storage or rapid thermal cycling. In bedding plants making memory and conventional foam, our customers report less scorching and more consistent recovery after high-pressure compression, thanks to the way DC 5950 manages bubble coalescence during cure. Rigid foam panel makers cite lower defect rates and better dimensional control per panel meter poured, decreasing rework and waste haulage.

    Comparing DC 5950 vs. Conventional Surfactants

    Many old-generation silicone surfactants on the market emerge from simple siloxane graft reactions that do little beyond reducing surface tension. Their cell control and foam height results show major batch-to-batch swings, and processors often end up dialing in extra surfactant or swapping additives to avoid visible defects. We built DC 5950 around an engineered copolymer that demonstrates more reproducible results across diverse isocyanate indices, blowing agent packages (water, methylene chloride, pentane), and tough-to-handle fire retardant systems.

    During scaled trials, DC 5950 achieves stable foam flows even when running with low-emission polyols or high scrap regrind levels. Competing products often require higher dosages, leading to stickier foam, off-odors, or VOCs that exceed regulatory levels. DC 5950 works effectively at lower add-on rates in the final recipe, translating to cost savings for the foam producer and easier regulatory compliance. We observe lower migration to surrounding foam, reducing discoloration or sticky surface issues in long-term storage.

    What truly sets DC 5950 apart lies in its resilience against raw material shifts. Over the past decade, global polyol and isocyanate qualities have shifted widely, and supply interruptions force processors to run on available materials. We designed DC 5950 to handle polyols with broad molecular weight and EO/PO ratios, so end users experience fewer surprises. In contrast, lower-cost surfactants built around older siloxane technology end up dropping out of solution, raising viscosity, or causing localized foam collapse in new polyol batches. DC 5950 consistently runs clear and stable, even with recycled polyol content or high filler loading, which is crucial for today’s foam market economics.

    Industry Experience—On the Plant Floor

    It’s easy to forget that real-world foam production must deal with imperfect dosing systems, variable ambient conditions, and raw material contaminants. Years ago, we invested in automated batch reaction and in-line analytics within our own surfactant production lines, giving us insight into how microscopic changes in polymer chain architecture directly affect end-foam cell size and shrinkage. VORASURF DC 5950 emerged from this hands-on research as a tool that refuses to let small snags turn into expensive production stoppages.

    On foaming lines that process up to several hundred foam blocks per shift, our partners have seen DC 5950 reduce scrap rates by up to 15 percent versus older surfactants. Block height uniformity and skin smoothness show visible improvements, especially on machines facing daily restart and shutdown routines. Staff appreciate the easier pumpability and faster clean-out, which means less downtime and fewer delays turning over to the next color or grade. Our technical field teams regularly visit customer plants to help with fine-tuning formulation and answer process questions, bringing knowledge from our own surfactant batch-ups and from hundreds of global foamers who have switched to DC 5950.

    Warehouse managers have noticed another benefit—DC 5950’s shelf life. Old-style surfactants often start separating, gelling, or forming particulates during long-term storage, especially when shipped to tropical climates. We formulated DC 5950 for long-term stability under a range of temperatures and humidities, so inventory managers can store surplus drums for quarterly production campaigns without surprises when the drum is uncapped months later. This reliability cuts hidden costs tied to wasted materials and unplanned cleaning cycles.

    Eco-compliance trends are not just a regulatory checkbox. They define market access. Many of our clients face tough European and Asian restrictions on emissions and trace chemicals. DC 5950 meets leading ecolabel requirements and passes VDA, CertiPUR, and California indoor air quality tests. Unlike some surfactants that rely on legacy solvents or leave behind odor-causing impurities, DC 5950 utilizes a cleaner backbone with no halogenated solvents—a point underlined by customer audit reports from some of the world’s toughest buyers in bedding, seating, and HVAC insulation markets.

    Field Solutions, Feedback, and Continuous Development

    The story behind DC 5950’s acceptance is as much about support as it is about chemistry. We built its features in close dialogue with operators and R&D directors who were tired of chasing shifting reformulation targets caused by unpredictable surfactant behavior. Over time, real-world feedback from foam lines shaped small but crucial improvements: optimized pour times, tighter particle control for easier machinery washout, and copolymer tweaks that deliver reliable performance when recipes call for recycled foam scrap or new blowing agent packages.

    Some of the earliest field adopters came from flexible foam markets adjusting to low emission requirements in automotive and bedding. Surfactant drift affected the color, thermal stability, and mechanical tunability of these modern foam grades. Product managers flagged foam odor, fogging, and settling in block storage as issues with old commodity products. DC 5950’s chemical design addresses these complaints by nearly eliminating component migration and allowing consistent foam performance even under high-scrap or recycled-content recipes. Mattress and furniture foamers have publicly acknowledged a drop in returns tied to post-cure shrinkage and surface defects since transitioning to DC 5950.

    In technical terms, DC 5950 stabilizes cell opening and growth at the molecular level. Its hydrophilic-lipophilic balance interacts smoothly with multi-functional polyether and polyester chemistries, minimizing disruptions during fast-pour or continuous slabstock production. Production engineers have noticed that DC 5950 still performs when foaming lines push higher isocyanate indices, a common situation as companies seek stiffer foam for improved product life and durability. With some conventional surfactants, profiles become brittle or uneven, but DC 5950 supports flexibility without tradeoffs in compression set or appearance.

    Working Directly With Our Customers

    Supplying surfactants is not just shipping drums—it’s working shoulder-to-shoulder with foamers facing unique site conditions. From our production and technical service teams to the plants we supply, the conversations all come back to what’s happening on the floor: night shift interruptions, power sags, or fast-changing raw material specs. We run ongoing field tests with our partners, benchmarking foam rise, cell structure, and emissions data under realistic shop conditions—too many competitors only test with textbook mixes in small beakers, never seeing what happens with recycled content, local water, or regional temperature swings.

    Years of feedback taught us that value comes from predictability and trust. DC 5950 does not force customers to overhaul their whole system—ingredients blend in as part of existing process streams. Line managers using both batch and continuous foaming methods have reported faster start-ups, fewer machine stoppages, and less trouble-shooting. The net result shows up in better process yields and more predictable downstream manufacturing for cut, laminated, or CNC-processed parts.

    This product was developed with both our own in-house foamers and independent field partners. The results, not just in performance data but in fewer complaints and faster transition to commercial scale, confirm why DC 5950 has become our lead performer. With the chemical and technical know-how built in every batch, it supports converters looking for more than a bullet-point surfactant—one that stands up to global logistics, regulatory change, and the daily pressures of modern polyurethane foam making.

    Conclusion

    Bringing VORASURF PU Silicone Surfactant / Additive DC 5950 to market required a focus on practical outcomes—less scrap, more stable cells, fewer headaches for operators, and high customer acceptance across demanding markets like furniture, bedding, automotive, and rigid insulation. Its strength comes from a balance of robust chemistry and manufacturing experience honed in real-world plants, under changing conditions and the relentless pace of production. As chemical manufacturers, our commitment goes beyond raw material supply. It means supporting our partners with the technical insight and practical solutions needed to keep their foam lines running strong.