| HS Code | 832644 |
| Product Name | VERSIFY Propylene-Based Elastomer 2300 |
| Polymer Type | Propylene-based elastomer |
| Density G Cm3 | 0.870 |
| Melt Flow Rate G 10min | 8 |
| Hardness Shore A | 75 |
| Glass Transition Temp C | -32 |
| Tensile Strength Mpa | 10 |
| Elongation At Break Percent | 850 |
| Flexural Modulus Mpa | 30 |
| Vicat Softening Point C | 44 |
| Needle Penetration Mm 10 | 13 |
| Clarity | High clarity |
| Odor | Low odor |
| Processing Methods | Injection molding, extrusion |
| Recyclability | Recoverable/recyclable in polyolefin recycling streams |
As an accredited VERSIFY Propylene-Based Elastomer 2300 factory, we enforce strict quality protocols—every batch undergoes rigorous testing to ensure consistent efficacy and safety standards.
| Packing | VERSIFY Propylene-Based Elastomer 2300 is packaged in 25 kg (55 lb) polyethylene bags featuring product labeling, company logo, and handling instructions. |
| Container Loading (20′ FCL) | Container loading (20′ FCL) for VERSIFY Propylene-Based Elastomer 2300 typically accommodates approximately 18–20 metric tons in 25 kg bags. |
| Shipping | VERSIFY Propylene-Based Elastomer 2300 is typically shipped in pellet form, packaged in 25 kg bags or bulk containers. The product should be stored and transported in a cool, dry, and well-ventilated area, away from direct sunlight and incompatible substances. Standard shipping precautions for non-hazardous chemicals apply. |
| Storage | VERSIFY Propylene-Based Elastomer 2300 should be stored in a cool, dry, and well-ventilated area, away from direct sunlight, heat sources, and incompatible materials. Keep the product in its original, tightly sealed packaging to prevent contamination and moisture absorption. Avoid exposure to extreme temperatures. Follow all relevant safety and storage guidelines as outlined in the Safety Data Sheet (SDS). |
| Shelf Life | VERSIFY Propylene-Based Elastomer 2300 typically has a shelf life of 24 months when stored in cool, dry, and covered conditions. |
Our VERSIFY Propylene-Based Elastomer 2300 delivers controlled elasticity, impact strength, and clarity for downstream manufacturers seeking to refine functionality and processing in polymer compound applications. We supply directly from our integrated production site, supporting customers across several industrial segments with tailored material handling and batch traceability to meet scale-up and long-term repeat use requirements.
Leading film manufacturers use the elastomer as a modifier in cast and blown polyolefin films to increase sealability, tear resistance, and puncture durability, especially for high-clarity packaging formats. Direct in-line blending enables converters to adjust properties during extrusion, supporting new performance requirements from the food, medical, and personal care packaging industries demanding both toughness and optics in multilayer configurations.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Tier-1 and Tier-2 automotive compounders depend on propylene elastomer to fine-tune softness, surface haptics, and cold impact resistance in TPO formulations for interior and exterior automotive components. The polymer’s controlled crystallinity profile supports stable low-gloss appearance and dimensional stability after injection molding or extrusion, meeting carmaker demand for both robust mechanical specs and cosmetic surface quality without plasticizer migration risk.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Industrial adhesive producers incorporate this elastomer for its low-melt viscosity and balanced cohesive properties, enabling hot melt adhesives with improved flow, flexibility, and substrate bonding—especially for case & carton sealing, hygiene disposables, and pressure-sensitive tape manufacturing. Its consistent melt index supports precise process control across variable ambient plant conditions and targets a sharp balance between tack, open time, and set speed.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Continuous filament and staple fiber producers rely on propylene-based elastomers to enhance stretch recovery, softness, and thermal stability for elastic fiber components in spunbond and meltblown nonwovens. This enables cost-efficient, latex-free solutions in hygiene products and medical barrier textiles, meeting regulatory and consumer requirements for flexibility and hypoallergenic properties in skin-contact environments.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Compounding plants utilize the elastomer to advance the flexibility and crack resistance of low-voltage power and telecommunication cable jackets and insulation layers. Adjusting the ratio in relation to base LLDPE/HDPE/PP compounds helps cable manufacturers achieve enhanced cold flexibility and lower modulus, while maintaining required dielectric properties and processability for high-speed wire coating lines.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Processors in the consumer products sector employ this elastomer in TPE compounds designed for soft-touch grip, cushioning, and impact absorption in assembled goods, delivering long-lasting mechanical performance and finish consistency under frequent handling and environmental stress. Its clean extrusion behavior supports co-injection and overmolding operations where softness must be localized without chemical crosslinking agents or phthalates.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Competitive VERSIFY Propylene-Based Elastomer 2300 prices that fit your budget—flexible terms and customized quotes for every order.
For samples, pricing, or more information, please contact us at +8615365186327 or mail to sales3@ascent-chem.com.
We will respond to you as soon as possible.
Tel: +8615365186327
Email: sales3@ascent-chem.com
Flexible payment, competitive price, premium service - Inquire now!
As a chemical manufacturer with decades of hands-on experience in polyolefin process lines, we see VERSIFY Propylene-Based Elastomer 2300 as more than a raw material—it marks a leap in elastic polymer technology. VERSIFY 2300 carries a structure built on proprietary catalyst chemistry. We have poured years into tuning the propylene-ethylene relationship, aiming for an elastomer that lets converters cross hurdles the older grades once locked in place. You might come in searching for an easy upgrade from ethylene-octene elastomers, but 2300 goes further. The backbone we’re running here brings controlled crystallinity—enough to push melt strength, enough to kick off resilience, all with a soft touch that stands out on the finished product.
Looking at the resin as it’s produced, the first thing that jumps out is the consistency of its melt flow. VERSIFY 2300 sits comfortably in the 7–12 g/10min range for melt index (230°C/2.16kg), a sweet spot for processors running TPOs or soft touch film layers. It comes out in a pellet form designed for minimal dust, protecting downstream extrusion. Every lot that leaves our reactors tracks tensile strength and elongation, and over the years, our records show values that hold up batch after batch. If you remember the headaches with old EPR or EVA blends—crumbly consistency, unpredictable gel points—that’s not an issue you’ll face here.
By steering toward a semi-crystalline architecture, the polymer network we’ve engineered with VERSIFY 2300 delivers a tactile softness but still stands up to impact and tear. In end-uses such as automotive TPOs, industrial films, hygiene films, and even pressure-sensitive adhesives, the final articles boast a toughness hard to capture from single-monomer systems.
The real test of an elastomer is what happens when you put it in the churn of a commercial compounding line. For our facility, we operate large-scale production lots with stringent controls over temperature and reactor feed. This has allowed us to fine-tune the catalyst response, leading to a uniform comonomer distribution throughout the chain. With VERSIFY 2300, the crystallinity sits right at the threshold that blends stiffness and stretch—enough to resist sag in thermoformed parts while still allowing stretch in films without white stress marks.
I’ve watched real customers swap incumbent resins for this product in blown film lines and watch their bubble stability improve—fewer breaks and better layflat geometry. There is an easy, almost forgiving mixing curve when compounded with polypropylene or polyethylene. Many blend it at low addition rates (10–20%) for improved softness and elasticity; we also see higher dosages, such as in athletic flooring or impact modifiers. No significant smoke, no gel speciation in the extruder head; our operators report much less downtime when switching between grades.
In the wire and cable insulation market, the flexibility and electrical performance open new possibilities. Gone are the times you needed costly peroxide crosslinking just to meet impact and cold bend. Every reel of resin we supply stacks up to the specs under repeated heat aging and subzero flex testing—real requirements in today’s electrical and building codes.
Common questions always come through from both R&D and plant managers: what sets a propylene-based elastomer apart from the old standards—EPR, EPDM, EVA, POE? The answer starts with the molecular backbone. Our process builds in high purity, with fewer extractibles. This means less plasticizer migration—critical for sensitive packaging, hygiene, or medical films. In the past, we worked with polyolefin elastomers that would leach, fog, or cause seal delamination after a few weeks on the shelf.
Where EVA or LDPE might offer clarity, they usually lose elastic resilience and can turn brittle at low temperatures. Traditional EPR and EPDM run into melt-processability headwinds—high Mooney viscosities, awkward crosslinking, and sticky pellet handling. With VERSIFY 2300, the balance tips back toward easy processing. For example, in roof membranes and waterproofing, the polymer sees extended UV and ozone exposure. Our data shows less color drift and less stiffness increase compared to traditional EPDM or oxidative-cured blends.
The true difference in a propylene-based system like 2300 emerges in compounding flexibility. The resin blends seamlessly with PP, PE, and even some recycled streams, without the risk of phase separation or loss of physical properties. In sheet extrusion, clarity and cling performance beat many high-VA EVAs at equivalent loadings. Where PE-based elastomers struggle with high-temperature resistance, 2300’s higher melting point structure lets downstream processors hit higher service temperatures—which matters for hot-melt applications and sterilizable packages.
It is easy to discuss properties on paper, but we put our products to the test both in-house and in the hands of trusted partners. VERSIFY 2300 holds its edge under a range of environmental assaults. Outdoor parts compounded with this elastomer resist snappy failure under repeated flex, making it a trusted choice for gaskets and seals. Over the last several years, we have received feedback from automotive OEMs and molder partners confirming longer service life and less hardening compared to TPO blends filled with traditional elastomers.
The hygiene sector places unique demands on any resin—soft touch, abrasion resistance, minimal odor, and clean migration profiles. VERSIFY 2300 has facilitated upgrades in backsheet films for diapers and adult incontinence products, where comfort must meet strength. Finished products using this elastomer show lower noise on stretch and repeated use, an important comfort factor. With consumer feedback in mind, we’ve also worked on reducing any trace monomers and low-molecular-weight fractions, protecting both wearer safety and shelf stability.
As a chemical producer running full analytical panels, every batch is logged for volatiles, non-intentionally added substances (NIAS), and food contact compliance. VERSIFY 2300 regularly passes even the tightest standards for migration and organoleptics, keeping pace with evolving regulations worldwide. Our team has direct lines to regulatory experts and keeps the product ahead of new requirements.
Post-consumer recycling isn’t just a theory anymore; it runs through our process planning and internal testing. Unlike some legacy elastomers that break down into sticky, low-melting residues, VERSIFY 2300 survives several melt re-processings with minimal fibrillation or loss of key mechanicals. We’ve worked with compounders who incorporate high post-consumer recycled streams using this resin to maintain toughness. The crystal-clear proof comes from in-house extruder runs: the finished part still flexes and recovers after multiple cycles, an important data point for multipass recycling.
Sustainability is not only about recycling. The lower density of VERSIFY 2300 versus some soft modifiers means converters gain yield per unit mass. Over a year’s worth of production, this directly reduces polymer output needed for a given job, an immediate savings on both cost and upstream carbon emissions. In terms of energy input, our proprietary process design lets us drive reactor efficiency and minimize waste fractions, all tracked through ISO-certified metrics.
Many product innovations do not originate from the lab but from pain points on the factory floor. Clients have approached us, tired of black specs, gels, and process downtime. VERSIFY 2300 tackles many of these challenges head-on with a stable melt flow, minimal odor, and clean pelletizing—keeping lines running longer with less risk of off-grade runs.
Customers also want to see improved safety. VERSIFY-based blends show reduced smoke and acrolein release compared to legacy elastomeric systems—both at compounding and during end-use exposures such as welding, lamination, or thermal forming. Our QA team regularly coordinates with customer plants to help set up safe storage and handling conditions, so product steers clear of moisture pick-up and oxidative degradation.
On the technical service side, our engineers provide on-site and remote support for resin introduction and line qualification. We have run joint trials with partners developing soft automotive trims, flexible films, cable sheathing, and medical devices. By working directly with compounders, downstream processors, and OEMs, we’ve been able to fine-tune process windows, minimize dust at transfer points, and verify product consistency from the first truckload through every repeat order.
At our facilities, change is constant—new grades under development, new regulatory hurdles on the horizon, new processing lines to help our customers stay competitive. VERSIFY 2300 has become a staple for those seeking to bridge the gap between soft touch and high-endurance materials without compromising efficiency or finished product quality. Switching to propylene-based elastomers is not simply a substitution; it opens up new product designs that weren’t possible with earlier polymer generations.
For example, we’ve documented improvements in the production of opaque or low-haze hygiene backsheets that also demand excellent stretch recovery. The polymer runs with low drag in coextrusion, helps tune puncture resistance in draw tape, and improves touch in products ranging from athletic gear to food storage solutions. In lamination films, the unique melt behavior of this elastomer gives both adhesion and clarity, reducing the need for costly tie layers or compatibilizers.
As the global market faces ongoing logistics and supply-chain disruptions, plant managers need more than assurances—they need a partner who validates every lot and guarantees composition. We control the full manufacturing path for VERSIFY 2300, from monomer sourcing through final pellet conditioning. This approach safeguards QA results and traceability. Each railcar and road cargo is checked under our QC regimen, ensuring quality doesn’t become a moving target.
Supply stability becomes essential during peak demand cycles, and we maintain multiple backup lines and regional shipping points to guarantee continuity. On the R&D side, we offer partners access to expert staff who have helped dozens of clients make the switch from legacy elastomers. Our team is available for compounding, reagent compatibility testing, and ongoing troubleshooting, so lines run smoother and your plant finds value beyond the invoice.
Because of the deep technical roots our teams hold—from catalyst engineers to application specialists—we bring a level of understanding that isn’t available from brokers or commodity suppliers. Each time a plant sees a hiccup in extrusion or a new performance issue, we track it back to molecular structure, not just surface-level “performance” claims on a spec sheet.
VERSIFY 2300 continues to drive performance improvements in a crowded landscape, not only through physical property upgrades but through simplification of manufacturing logistics. Single-silo capability, minimized hopper cleaning, and steady melt profiles lead to better machine uptime. We keep a close eye on our customer complaint log and see just how much less disruption occurs compared to lines running legacy EPDM or EVA products.
Downstream markets react to performance gains quickly. Flexible toys, medical tubing, filtration membranes—all benefit from better softness and less powdering, while finished films avoid the hot-tack brittleness some incumbent elastomers suffer. In the food packaging space, long-term taste and odor neutrality, proven in repeated challenge tests, helps our clients clear both regulatory and consumer hurdles.
Technical progress never ends, and every lot shipped is a reflection of what dedicated team members achieve in close partnership with industry leaders. We invest in continuous improvement, plant upgrades, and ongoing feedback loops, so the product in every bag is the same—batch to batch, year after year.
Each production run reminds us that technical chemistry must serve a practical need. VERSIFY Propylene-Based Elastomer 2300 continues to gain ground thanks to its straightforward processing and predictable results, propelling companies to move beyond the compromises of earlier resin systems. Converters find it easier to introduce into existing workflows, and maintenance crews spend less time adjusting extruder setups or clearing fouled lines.
We built VERSIFY 2300 not to follow the market but to push it forward. The industry demanded cleaner running resins, flexible enough to adapt to more applications, tough enough to withstand the real-world grind of logistics and end-use. Through persistent development and constant focus on downstream practicality, this product delivers measurable gains in both the final goods and the manufacturing environment.
The bottom line stays clear: VERSIFY 2300 keeps your plant competitive, streamlining operations while boosting the value packed into every part, film, sheet, or molded article it touches. As new challenges and standards arise, we stand ready to continue refining and supporting the product, keeping one step ahead of what industry and consumers expect from modern elastomers.