| HS Code | 259621 |
| Product Name | TUFLIN Linear Low Density Polyethylene (LLDPE) HS-7028 NT 7 |
| Density | 0.928 g/cm³ |
| Melt Flow Index | 2.8 g/10min (190°C/2.16kg) |
| Tensile Strength At Yield | 11 MPa |
| Elongation At Break | 600 % |
| Flexural Modulus | 210 MPa |
| Dart Impact Strength | 130 g |
| Haze | 10 % |
| Gloss 45 Degree | 60 % |
| Film Thickness Range | 20-150 μm |
| Application | Film extrusion |
As an accredited TUFLIN Linear Low Density Polyethylene (LLDPE) HS-7028 NT 7 factory, we enforce strict quality protocols—every batch undergoes rigorous testing to ensure consistent efficacy and safety standards.
| Packing | The packaging for TUFLIN Linear Low Density Polyethylene (LLDPE) HS-7028 NT 7 is a 25 kg white plastic bag with bold blue lettering. |
| Container Loading (20′ FCL) | Container Loading (20′ FCL) for TUFLIN LLDPE HS-7028 NT 7: 18-22 metric tons packed in 25kg bags, palletized. |
| Shipping | Shipping for TUFLIN Linear Low Density Polyethylene (LLDPE) HS-7028 NT 7 is typically carried out in 25 kg bags, loaded onto pallets for safe and efficient transport. The product should be kept dry and protected from direct sunlight during shipping to maintain quality and prevent contamination or degradation. |
| Storage | **TUFLIN Linear Low Density Polyethylene (LLDPE) HS-7028 NT 7** should be stored in a cool, dry, and well-ventilated area, away from direct sunlight and sources of heat or ignition. Keep the material in its original, tightly closed packaging to prevent contamination and moisture absorption. Avoid storage near strong oxidizing agents and ensure the storage area is clean and free from combustible materials. |
| Shelf Life | TUFLIN LLDPE HS-7028 NT 7 typically has an indefinite shelf life when stored unopened in cool, dry, and clean conditions. |
TUFLIN LLDPE HS-7028 NT 7 supports critical manufacturing segments through its specific resin properties, enabling downstream producers to achieve precise mechanical, clarity, and processing requirements across four core industrial sectors. Below, we detail the practical use cases, regulatory landscape, typical recipe ratios, downstream integration steps, and end product categories for each mature application.
Downstream film manufacturers apply TUFLIN HS-7028 NT 7 in the extrusion of food grade packaging films, particularly for stretch wrap and multilayer flexible pouches that must combine puncture resistance with heat-sealing strength. Its low gel content and high clarity support multilayer blown film lines that require consistent gauge distribution. Processors often coextrude with LDPE or metallocene LLDPE to attain regulatory-compliant performance in direct food contact applications for dairy, bakery, and fresh produce industries.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Industrial packaging converters utilize this LLDPE grade for producing high dart impact strength liners and FFS (form-fill-seal) sacks used in bulk material transport. Its balanced melt index allows integration into automated bagging lines requiring toughness under load, resistance to punctures during handling, and low slip levels to facilitate sack opening and filling in powder handling industries. Applications focus on cement, chemical, and fertilizer bagging where consistent weld and drop strength are critical for logistics performance.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Producers of agricultural films incorporate this material to achieve durable yet flexible mulching sheets, silage covers, and greenhouse films with optimal UV stabilization profiles. The resin’s controlled molecular weight distribution supports consistent layflat performance and high tensile strength-to-weight ratio, critical in mechanized field laying and high-wind greenhouse environments. Combining tailored masterbatches, the films address diverse climate zones and extended exposure lifetimes.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
TUFLIN HS-7028 NT 7 provides vital performance attributes in polymeric sheathing compounds for low and medium voltage cable insulation. Compounding plants blend the resin with select antioxidants and fire retardants to ensure dielectric strength, flexibility under bending loads, and longevity in buried or outdoor conditions. Its low metallic and ash content enable stable extrusion during cable core coating, maintaining consistent wall thickness and facilitating high-speed spooling operations.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Rotational molding specialists use TUFLIN HS-7028 NT 7 to achieve balanced impact strength and environmental stress crack resistance in large, hollow industrial tanks, bins, and containers. The resin’s narrow molecular weight distribution ensures repeatable melt flow and surface finish, especially for liquid handling products requiring leak-proof integrity and chemical compatibility. Careful dosing and cycle control allow manufacturers to achieve uniform wall thickness, critical for regulated applications in chemical storage and handling.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Competitive TUFLIN Linear Low Density Polyethylene (LLDPE) HS-7028 NT 7 prices that fit your budget—flexible terms and customized quotes for every order.
For samples, pricing, or more information, please contact us at +8615365186327 or mail to sales3@ascent-chem.com.
We will respond to you as soon as possible.
Tel: +8615365186327
Email: sales3@ascent-chem.com
Flexible payment, competitive price, premium service - Inquire now!
Polyethylene grades keep evolving as markets push for cleaner, tougher, and more efficient solutions. TUFLIN Linear Low Density Polyethylene HS-7028 NT 7 didn’t come from guesswork—it came straight from thousands of hours spent on compounding lines, extrusion machines, and with customer engineers who need a resin that actually performs. Over the past decade, film producers, bag makers, sheet extruders, and flexible packaging operations have come to ask for HS-7028 NT 7 by name because they want less downtime, predictable results, and fewer surprises with each production run.
The biggest story with this material is not a fancy new “feature”—it’s the balanced, predictable way it works under real production pressures. This resin shows reliable drawdown and solid melt strength, so extrusion teams can run high-output lines without fighting edge-web breaks or excessive neck-in. If you work with blown film, that means fewer line stoppages and better bubble stability, which translates into fewer defects in finished rolls. Sheet producers have noticed the resin’s good toughness even at lower thickness—and it’s rare for a job to get rejected because the film split during use or post-processing.
We’ve kept the melt flow index at a sweet spot. Operators see easier gauge control, whether they are producing industrial liners, grocery sacks, or specialized flexible pouches. Molders tell us the pellets feed cleanly, with low dust and no fuss. This may seem simple, but anyone who has had to clean out a hopper or shut down a line over poor pellet quality knows how much money and aggravation gets saved.
Melt flow rate on HS-7028 NT 7 measures right in the zone where most modern blown and cast film machines run at their fastest and most stable. We don’t chase artificially high clarity if it means giving up durability. The balance between toughness and processability was struck through years of tuning reactor temperatures and carefully selecting co-monomers, so bag fabricators don’t have to choose between sealing reliability and handling strength.
We’ve produced hundreds of lots for both export and local film converters, and the feedback always comes down to the same core issues: fewer pinholes, better tear strength in the machine and transverse directions, and films that maintain their performance over long term storage—even in dusty or humid environments. This isn’t theoretical. One extrusion customer kept track of line run hours and repairs before and after switching to HS-7028 NT 7 and saw a measurable reduction in maintenance hours.
HS-7028 NT 7 ends up in a range of products—grocery T-shirt bags, industrial liners, shrink films, agricultural films, courier pouches, and countless flexible packaging formats. The reason converters use this grade in mainstream applications is that it holds up to rough handling and repeated flexing. Small manufacturers use it because they can run longer jobs without stopping to adjust the machine or swap out resin.
We see major packaging houses running it in multilayer co-extrusions. The resin’s compatibility with common LDPE, HDPE, and metallocene LLDPE means no surprises at the interface. Seal performance remains steady across different blends, so packaging hasn’t seen broadening failure rates during storage. Exporters have reported bag shipments staying intact without burst failures—even after months in hot containers.
Industrial users—especially those who supply dust covers and pallet bin liners—demand materials that can stretch under load but don’t tear or degrade too soon. Our verification labs have watched these films perform under drop tests, cold storage folding, and rough operator handling. The balance between elongation and puncture resistance comes from the resin’s controlled comonomer content and polymer molecular weight distribution, not from overloading additives that cloud transparency or cause slippage later.
Process technicians care about more than just the specs on a data sheet. Through years of feedback and on-site machine trials, HS-7028 NT 7 was dialed in for steady back pressure and unproblematic feeding, even as dies and screws wear. Some clients sent in actual production rejects for root cause analysis; in nearly every case, a switch to HS-7028 NT 7 lifted output yield and cut down on off-gauge runs. Film width consistency—job after job—removes a lot of stress from operators and allows for predictable bag sizing.
Older converting lines often need resins that don’t gum up during seal cutting. This grade’s slip and anti-block performance—designed into the resin, not just post-compound—makes it possible for lines to turn out bags with crisp seals and easy wicketing without constant knife cleaning. The resin’s low gel count means fewer “fisheyes” or in-film contamination, reducing downtime for visual inspection or rework.
Every reactor run is a balance. We keep the octene or hexene comonomer ratio tuned so the finished resin delivers the stretch and impact strength our customers are looking for, but not at the expense of stiffness. This is crucial for converters producing heavy-duty sacks or courier bags that must survive both warehouse drops and daily use. Our strict quality control at every batch means the film’s mechanical performance remains stable, batch after batch.
Some clients use HS-7028 NT 7 in blends to dial in particular film strengths or to meet specific cost targets. The resin accepts color masterbatches and processing aids without jumping up in gel count or losing clarity unexpectedly. The resin also resists aging, so finished films keep their properties longer in storage without degrading or becoming brittle.
End markets face tighter regulatory oversight, especially around food contact and recyclability. Our plant follows ISO-based operating practices and tracks each resin batch from raw monomers through final packaging. The regulatory compliance record stands up to regular audits. Resin batches meet common food safety requirements—subject to country-specific review—so packaging producers can operate with confidence around compliance.
TUFLIN’s formulation supports the move toward thinner gauge films. Processors are able to drop thickness by several microns while keeping required mechanical properties. This means less polyethylene goes into each finished bag or sheet, which cuts both overall cost and end-user waste. Producers looking to increase PCR (post-consumer recycle) content have tested HS-7028 NT 7 in blends and found its processability supportive of higher recycled content without frequent machine stoppage.
Over the years, TUFLIN HS-7028 NT 7 has run on a wide variety of lines—old and new, high output and slow speed, automated and manual. One converter replaced a generic LLDPE grade and measured savings due to fewer reject rolls, lower scrap rates, and more stable line uptime. Another packaging plant, using the resin in multilayer pouches, reported their machine operators spent less time stopping lines for adjustments and rethreading after edge breaks.
Production teams rarely praise materials unless they make daily work easier. Yet feedback comes in repeatedly that HS-7028 NT 7 makes switching between jobs or blends less of a struggle—this comes down to the careful resin design, so melt strength and drawdown remain consistent even as machine parameters shift. This predictability matters most to high-mix, short-run operations. It means deadlines get met, scrap stays low, and complaints get cut before they reach production managers.
Every kilo of resin wasted is money down the drain for producers. By providing consistent lot-to-lot quality, we help companies reduce overuse “safety margin” that often gets built in due to variability from commodity suppliers. On lines equipped with real-time thickness gauges, operators can confidently push films thinner, knowing gauge bands stay tight and mechanical strength holds. Scrap reduction on industrial liners and shopping bags is significant across most users we surveyed.
Beyond direct material savings, the knock-on effects from lower downtime, fewer maintenance calls, and faster job changeovers accumulate into bottom-line gains. Some larger plants have shared production and financial data—the cumulative effect of HS-7028 NT 7 adoption translated into fewer overtime hours, less emergency repair, and more reliable inventory turnover. By keeping production floors moving and scrap bins emptier, these savings ultimately make their way into the end-user value proposition.
We often get asked: how does HS-7028 NT 7 compare with other LLDPE grades, including both LDPE and newer metallocene blends? Most customers find the resin bridges the processability and toughness gap. LDPE still gives very high gloss and good processability, but the tensile strength and impact resistance from linear grades like TUFLIN’s are significantly higher. Metallocene-catalyzed products can deliver superior clarity, but in aggressive industrial or heavy bag uses, conventional LLDPE like HS-7028 NT 7 continues to hold the edge for tear resistance and drawdown stability.
Importantly, this grade does not load up films with excessive slip or anti-block agents—overuse of these can cause challenges in further processing and printing. The pellet finish gives just the right feed balance, avoiding uncontrolled pellet migration in automatic feeders. For bag-makers relying on wicketing or high-speed packing, this attention to resin finish and handling can make the difference between an effortless run and a machine jam at the worst time.
HS-7028 NT 7 is not a commodity—our polymerization team puts in the hours to make sure every batch arrives with the performance expected. We routinely provide application support, reviewing line setups, film drawdowns, and troubleshooting reports. The partnership continues long after delivery, with technical teams checking in and adjusting as production lines and end-use needs evolve.
Clients using HS-7028 NT 7 for the first time often bring us films and bags to test on our own lines. Feedback goes straight to product development, ensuring that line operators—not just purchasing managers—get a material that runs as promised. This “feedback loop” between manufacturing and real plant conditions has driven the upgrades and tweaks seen in our current production formula.
Polyethylene chemistry rewards the patient and the obsessive. We continuously monitor key parameters—melt flow rate, density, gel count, and particle size—because a small change in any can affect output quality for weeks. Our view, shaped by years on the shop floor and in the control room, is that repeatability is worth more than flashy marketing claims. Customers in the field remind us constantly that a resin’s real value shows up not in the test tube, but in the smooth hum of extrusion equipment running at full tilt night after night.
We keep investing in process improvement because each year brings new demands. As local and regional regulations shift, we field-test new grades and get real-world data before suggesting new resin compositions. This boots-on-the-ground approach helps our partners reduce troubleshooting cycles, launch new product SKUs with less risk, and keep lines running—even as market pressures intensify.
Everyone in the value chain—resin producers, film converters, packagers—carries the weight of product consistency, compliance, and uptime. TUFLIN’s HS-7028 NT 7 stands as a result of keeping these needs at the center of every production, every shipment, and every support call. We listen to conversion teams. We diagnose the on-line failures that matter, not theoretical lab anomalies. We adapt here, on our lines, to help partners adapt on theirs.
The end product—be it a thin grocery bag, thick industrial liner, or co-extruded food pouch—carries a legacy of continuous improvement. We take responsibility for every kilo we make, knowing real people trust their operations, reputations, and customer relationships to the materials we deliver.
We never see TUFLIN HS-7028 NT 7 as a “finished” product. New customer needs, new equipment upgrades, and shifting sustainability requirements will always pull resin design in new directions. We run joint trials with converters looking for even thinner gauges, different additive packages, or product cost-out without loss of quality. By keeping the development cycle open and transparent, we foster trust and long-term performance results—not just spot market wins.
Our future goals involve boosting recycled content compatibility, supporting bio-derived blends, and further lowering the resource footprint of each kilogram produced. Operational reliability and customer communication remain our calling cards. Every new drum or hopper filled feeds back into the feedback loop, pushing the next resin batch to deliver just a bit more, a bit more consistently, and a bit more sustainably than the last.
Working as both the manufacturer and the problem-solver for HS-7028 NT 7 has taught us that being technically sound is only half the job. The real win comes when production teams report fewer headaches, less downtime, and smoother deliveries to their own customers. TUFLIN LLDPE HS-7028 NT 7 isn’t about the label—it’s about running lines efficiently, producing bags and films that last, and doing our part to keep every link in the supply chain strong and reliable. That remains the standard we measure ourselves against with every batch we ship out the door.