| HS Code | 236629 |
| Chemical Name | Ethylene Acid Copolymer |
| Copolymer Type | EAA/EMAA (Ethylene Acrylic Acid / Ethylene Methacrylic Acid) |
| Grade | 1202HC |
| Melt Index | 20 g/10 min (ASTM D1238, 190°C/2.16kg) |
| Density | 0.938 g/cm³ (ASTM D792) |
| Acid Comonomer Content | 10.0 wt% |
| Melting Point | 90°C |
| Form | Pellets |
| Color | Natural |
| Flexural Modulus | 220 MPa (ASTM D790) |
| Tensile Strength At Break | 17 MPa (ASTM D638) |
| Elongation At Break | 800% (ASTM D638) |
As an accredited NUCREL Acid Copolymer (EAA/EMAA) 1202HC factory, we enforce strict quality protocols—every batch undergoes rigorous testing to ensure consistent efficacy and safety standards.
| Packing | NUCREL Acid Copolymer (EAA/EMAA) 1202HC is packaged in 25 kg multi-layer polyethylene bags with product labeling. |
| Container Loading (20′ FCL) | Container Loading (20′ FCL) for NUCREL Acid Copolymer 1202HC: typically 17-19 metric tons packed in 25kg bags, securely palletized. |
| Shipping | NUCREL Acid Copolymer (EAA/EMAA) 1202HC is shipped in standard industrial packaging, typically 25 kg polyethylene bags or bulk containers to ensure safe handling and transport. The product should be protected from moisture and extreme temperatures, and stored in a cool, dry, well-ventilated area to maintain quality. |
| Storage | NUCREL Acid Copolymer (EAA/EMAA) 1202HC should be stored in a cool, dry, well-ventilated area, away from direct sunlight, heat sources, and moisture. Keep containers tightly closed to prevent contamination. Avoid contact with strong oxidizers and acids. Store at temperatures below 40°C (104°F) to maintain product integrity and prevent any degradation. |
| Shelf Life | NUCREL Acid Copolymer (EAA/EMAA) 1202HC has an unlimited shelf life if stored under recommended conditions in unopened packaging. |
As a direct manufacturer of NUCREL Acid Copolymer (EAA/EMAA) 1202HC, we support industrial clients in critical downstream sectors where performance, compliance, and process efficiency are all dictated by formulation detail. Below we outline representative B2B application fields, segmented by specialized use alongside explicit regulatory criteria, practical formulation insights, production interfaces, and end-use item examples.
Food-grade flexible packaging converters specify NUCREL acid copolymer to enable high-impact heat-sealing, aroma barrier, and strong adhesion to substrates like aluminum foil or metallized films. Processers value its acid functionality for developing coextruded multi-layer and extrusion-laminated films, especially for shelf-stable, retortable, or liquid product packaging. Film lines must comply with stringent migration and FDA food contact safety, and tight control of copolymer ratio is needed for seal integrity throughout high-speed, high-temperature line operations.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Wire and cable manufacturers use acid copolymer as a critical tie-layer and adhesion promoter for bonding thermoplastic insulation to metallic conductors or metal tape shields. This material’s polar monomers foster direct compatibility between polyolefins and aluminum, improving long-term electrical insulation reliability and mechanical flexibility in communication and data cable sheathing lines. Consistent formulation is essential to meet sector-specific flame retardancy, dielectric, and moisture resistance certifications.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
NUCREL acid copolymer grades deliver tough, flexible, chemical-resistant adhesive films and hot-melt binder matrices for laminates assembled into industrial and technical applications. Its acid moieties optimize adhesion to polar surfaces including textiles, metals, and coated papers. Compounders select ratio to balance open time, substrate compatibility, and cure speed, and precise formulation is essential to meet safety and VOC regulations for indoor air quality and product sustainability.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Major polymer tank and container producers require acid copolymer tie-layers for co-extruded or rotationally-molded multiwall tanks and canisters, facilitating permanent bonding between HDPE structural plastic and EVOH barrier layers. Automotive and chemical packaging applications enforce rigorous permeation limits for hydrocarbons and solvents, with precise additive concentration driven by end-use exposure, container geometry, and VOC regulatory caps.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Pharmaceutical film producers exploit the acid copolymer for durable, flexible tie-layers in complex coextruded structures combining polyolefins, PVC, and aluminum foils. Its chemical surface reactivity allows effective lamination in pharma-grade cleanroom lines, fulfilling shelf-life, barrier, and tamper-evident criteria. Strict compliance with pharmacopoeial and medical device contact safety standards requires both careful raw material QC and consistent integration in validated process flows.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Manufacturers engineering hybrid powder coating solutions for utility, appliance, and automotive end uses incorporate the acid copolymer as a primer/dispersant to promote high-adhesion underlayers on metallic goods. Especially in electrostatic and thermoset powder lines, controlled acid density ensures long-term resistance to delamination and corrosion in aggressive field conditions. Application must meet market-specific ISO and ASTM durability standards in addition to production batch traceability.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Competitive NUCREL Acid Copolymer (EAA/EMAA) 1202HC prices that fit your budget—flexible terms and customized quotes for every order.
For samples, pricing, or more information, please contact us at +8615365186327 or mail to sales3@ascent-chem.com.
We will respond to you as soon as possible.
Tel: +8615365186327
Email: sales3@ascent-chem.com
Flexible payment, competitive price, premium service - Inquire now!
Over decades in chemical manufacturing, the daily focus is not just on chemistry but on how a resin performs at a converter or packager’s plant. NUCREL Acid Copolymer 1202HC is not a theoretical product designed by lab technicians with only textbook properties in mind. We produce this material at scale because real-world applications demand versatility, robustness, and consistent quality. Every grade of NUCREL we melt, pelletize, and ship reflects that dedication.
1202HC is one of our higher acid-content grades built mainly around ethylene and acrylic acid but includes minor EMAA (ethylene methacrylic acid) content. That formulation means enhanced adhesion in structures exposed to tough conditions, especially structures requiring heat, chemical resistance, and long shelf life. Over the years, packagers, lamination specialists, and co-extrusion coating producers have explained their daily challenges: seal integrity, product migration, bond failures, and regulatory and food safety requirements. The design of 1202HC stemmed from direct conversations with these users, followed by meticulous adjustment of molecular weights and acid levels to meet their specific pain points.
Acid copolymers such as NUCREL 1202HC have earned a place in high-performance packaging, not just by supplying basic flexibility but by solving issues that traditional polyethylene can't handle. Regular LDPE and LLDPE struggle with polar contaminants, aggressive flavorings, or the need to bond to metals and foils. Many customers once tried ordinary grades before coming to us with failures—peeling seal seams, delamination after retort cycles, migration of plasticizers—issues linked to the absence of acid functionality. The higher acid comonomer content in 1202HC, with melt flow designed specifically for commercial production speeds, closes those gaps.
We have observed during extrusion printing or lamination that NUCREL's chemistry creates stronger ionomeric crosslinks at interfaces. That translates to more tenacious seal performance. For converters, this means confidence: running at line speeds without pausing every few hundred meters to check for lamination voids. Film webs married to aluminum, paper, or polyamide hold together through complex processes with fewer surprises. After extended hot fill or sterilization, weld strength remains, thanks to not just the base polymer but also the exacting controls we maintain on acid distribution within each pellet.
Every batch of NUCREL 1202HC that leaves our facility embodies tight molecular weight control and acid uniformity, supported by years of incremental manufacturing improvements. The typical melt index for 1202HC sits around moderate values suitable for both extrusion coating and film blowing, neither too sluggish for fast-running lines nor too fluid for controlled gauge. Acid content, measured as a percentage of acrylic acid by weight, distinguishes 1202HC’s binding power: while lower-acid grades produce films that resist water and oxygen, 1202HC cranks up adhesion to the point where challenging lamination partners—metallized foils or oxygen-barrier nylons—bond almost stubbornly.
Many technical managers ask about quality consistency across lots. Our reactors and pelletizing lines run with robust process analytics: FTIR, titration, online melt index, and chromatography each batch. We do this because the food packaging industry, personal care, and cables all demand traceability and stability. If a customer is extruding a barrier cheese wrap or medical overwraps for device sterilization, there isn’t room for “close enough.” Over the years, working side by side with converters, we have refined stabilization additives and acid clean-up routines to cut down on off-smell, minimize gel points, and support regulatory compliance.
We didn’t create 1202HC for abstract use. Decades ago, packagers struggled with oily, spicy, or high-acid food contents steadily migrating through their pouch or lid seal layers. Regular PE or EVA couldn’t hold back flavor or aroma; they would either allow bleed-through or the seal would break down under shelf-life test conditions. In our plant labs, we tested early NUCREL batches with real-world fill products—tomato and citrus, hot sauces, processed meats. 1202HC consistently maintained its barrier and seal through high-temperature cycles that mimic commercial filling. Based on this, today’s commercial formulations can handle aggressive flavor oils and strong solvents, protecting pack contents and keeping flavors from leaching into the packaging structure.
Technical service teams often find that a converter’s line conditions—peak shear, edge cooling, print adhesion, or even local water chemistry—complicate things on the shop floor. Experience has taught us not to blame operators or equipment. Sometimes, a slightly different acid percentage or a minor shift in base resin branching solves otherwise puzzling defects. This ability to fine-tune and batch-correct, on demand, only exists because we have our own compounding facilities and not just trading or blending from distributed sources. 1202HC responds well across a range of conditions: lines running as slow as 100 meters per minute for thick gauge, or over 400 meters per minute for retail pouch webs.
Food contact and regulatory safety come up in practically every customer meeting. Over the years, regulatory scrutiny has only increased, especially around sealant layers coming in direct contact with food. NUCREL 1202HC passes FDA and EU requirements for direct food contact, and we use high-purity grades of acrylic acid for polymerization. This reduces trace contaminants and off-taste potential—an important lesson learned from close partnership with both multinational packaged food brands and regional dairies, which run on tight sensory and chemical migration tolerances. Our analytical team measures extractables and leachables ongoing throughout any product run, sharing full data sets with customers on request.
Working with processors producing medical overwraps or cable sheathing, we see rising concern about not just strength but chemical inertness. 1202HC’s resistance to acids, alkalis, and oils comes out of its structure—not just surface properties, but throughout the bulk polymer. Years of feedback and returns drove us to refine our formulation so that even after months of exposure to sterilizing gases or salts, seal integrity does not slip, nor does surface tackiness develop.
Many packagers, especially those switching from other materials, ask why they should move away from standard LLDPE or EMA copolymers. The answer surfaces in performance and problem-solving, not just property tables. For example, in retort pouches or lidding films—especially for aggressive formulations or products with high flavor or acid content—we have seen ordinary polyethylene delaminate, absorb flavor, or allow slow oxidation at sealed seams. The chemistry of 1202HC solves those problems through reactive acid groups, delivering stronger polar interactions with foil, paper, and nylon layers without glue primers.
A converter working on multi-layer technical films for the electronics industry, where safety and migration limits are tight, reported much lower diffusion of solvents and far better delamination resistance after switching their tie layer to 1202HC. Another example: a regional dairy bottler had repeated line stops from seal leaks in HDPE/EVA caps in high-speed fill lines. Replacing standard copolymer blend with 1202HC, they eliminated downtime and improved test pass rates for internal pressure and product taste migration, increasing both operational efficiency and consumer confidence.
Production of 1202HC relies on a tightly managed polymerization, where the ratio of ethylene to acrylic acid controls not just final acid content but the polymer's flexibility, toughness, and clarity. We run each batch to target melt flow, aiming at an ideal balance so processors can run both cast and blown lines with minimal scrap. Our integrated supply lets us deliver fresh resin, without long aging or finishers that can degrade physical and optical properties.
In our plant, 1202HC sits in the spectrum between our lower-acid NUCREL grades and our higher-adhesion, specialty-function versions. It is not as stiff or high-temperature tolerant as our ionomer resins, which we reserve for the most demanding retort or abuse layer operations, but it holds a sweet spot between cost and performance. Compared to other grades, 1202HC strikes an important balance—providing enough acid content for tough seals on polar substrates, while still allowing easy processing on existing PE extrusion and coating equipment. Customers have pointed out that switching to high-acid materials sometimes brings extrusion gelling or line fouling; twenty years of feedback pushed us to adjust stabilization and additive balances, so 1202HC mitigates these defects even on legacy lines.
Some have compared 1202HC to EMAA-based resins, which can offer slightly improved adhesion to metal but may fall short on clarity and flexibility. During hot fill pouch production or flexible packaging films for dairy, we have seen EMAA alternatives crack or stress-whiten under repeated movement and flexion. 1202HC’s tailored acid level, combined with its specific copolymer composition, gives greater impact resistance under cold-chain logistics, including deep freeze and cyclic temperature changes.
Processors often worry about blocking, gels, or neck-in during coating, especially as flame and oxidative conditions vary from plant to plant. Our manufacturing teams collaborate with processors and maintenance leads directly, troubleshooting in real-time. Having primary production in-house means any feedback—be it about smell, pellet uniformity, or line compatibility—quickly filters back to process engineers and batch chemists, who can adjust resin characteristics for the very next run.
As regulatory and consumer pressure rises to create more recyclable flexible packaging, we have invested in internal programs to increase the percentage of post-industrial content and reduce our environmental load per ton shipped. NUCREL 1202HC, because of its designed compatibility with both conventional PE and newer biopolymer blends, aids processors trying to formulate thinner multilayer films or shift away from solvent-based adhesives entirely. While not designed as a full bio-based resin, our experience shows that more recyclable laminates using our acid copolymers pass both national and international regulatory checks for downstream packaging recycling streams.
As packagers seek to lightweight structures, moving from heavy-gauge sealant layers to high-performance thinner films, the barrier and adhesion strengths of 1202HC support recycling initiatives. We have closely partnered with recycling companies and industry bodies, gathering feedback on wash-off, pellet recovery, and contaminant migration, using it to further tune production parameters. Because we control all stages—from monomer tankers to finished pellet—traceability and purity remain fully managed, aiding both food safety and sustainable reuse.
We make every batch of NUCREL 1202HC ourselves, not through indirect sourcing or third-party finishing. This direct approach means every technical query, every process change at a converter’s line, filters directly to technical management, R&D, and production chemists who understand both plant and customer site realities. We regularly invite processors, R&D leads, and quality engineers to our production site for joint testing, not just to show off finished product but to walk them through extrusion runs, real packaging failures, troubleshooting, and process optimization. True quality and reliability in NA/EU/Asia-regulated packages stem from this hands-on partnership, not data sheets alone.
In our years working alongside leading food brands, pharmaceutical packaging companies, and industrial film converters, we have seen packaging shift from “fit-for-purpose” to “fit-for-regulator, processor, and end-user.” NUCREL 1202HC plays a significant role in that shift, as it offers technical security for both regulators and demanding processors. We have watched government guidance change on extractables, flavor migration, and shelf-life; we have always adapted our own analytical, QA, and plant systems to stay ahead, so every customer’s end product passes smoothly through audits, recalls, and compliance checks.
Making acid copolymer resins is not just polymer chemistry but constant adjustment, relentless feedback, and open doors for converter visits, sample runs, and troubleshooting as products hit the market. NUCREL 1202HC is the result of years of direct plant experience—watching laminators, extrusion coaters, and pouch makers run into and solve real-world issues. We keep updating the resin, not just on designer intent or spec sheets, but based on day-to-day converter and packager feedback.
The product earns its place on the line, not just in the catalog. From full-truck loads for global flexible packaging lines to specialty runs for local bottlers or medical component providers, we take pride in hands-on manufacturing at scale. 1202HC reflects what our customers teach us every season. Reliability comes from this ongoing engagement, not just meeting chemical analysis or published properties, but by stepping up production, support, and innovation based on each end-user’s daily experience.