| HS Code | 324402 |
| Product Name | ENGAGE Polyolefin Elastomer (POE) HM 7387 |
| Producer | Dow |
| Polymer Type | Polyolefin Elastomer |
| Density G Cm3 | 0.870 |
| Melt Flow Index G 10min 190c 2 16kg | 3.0 |
| Hardness Shore A | 87 |
| Tensile Strength Mpa | 11 |
| Elongation At Break Percent | 750 |
| Flexural Modulus Mpa | 70 |
| Vicat Softening Point C | 44 |
| Melting Point C | 79 |
| Typical Applications | Automotive, wire & cable, films, consumer goods |
As an accredited ENGAGE Polyolefin Elastomer (POE) HM 7387 factory, we enforce strict quality protocols—every batch undergoes rigorous testing to ensure consistent efficacy and safety standards.
| Packing | The ENGAGE Polyolefin Elastomer (POE) HM 7387 is typically packaged in 25 kg polyethylene bags, featuring product labeling and safety information. |
| Container Loading (20′ FCL) | 20′ FCL container loads approximately 16 metric tons of ENGAGE Polyolefin Elastomer (POE) HM 7387, typically packed in 25kg bags. |
| Shipping | ENGAGE Polyolefin Elastomer (POE) HM 7387 is shipped in pellet form, typically packed in 25 kg bags or 1,000 kg bulk bags. The product should be stored in a cool, dry, and well-ventilated area, away from direct sunlight and moisture, with proper labeling and handled according to applicable safety regulations. |
| Storage | ENGAGE Polyolefin Elastomer (POE) HM 7387 should be stored in a cool, well-ventilated, and dry area, away from direct sunlight and sources of heat. Keep the material in its original packaging, tightly closed, to prevent contamination and moisture absorption. Avoid storing near strong oxidizing agents. Follow standard industrial hygiene practices and safety guidelines to ensure product quality and personal safety. |
| Shelf Life | ENGAGE Polyolefin Elastomer (POE) HM 7387 has an indefinite shelf life when stored properly in original, unopened packaging under recommended conditions. |
ENGAGE POE HM 7387 delivers advanced performance for industrial applications where flexibility, impact resistance, and processability are critical. Our research and application support team work directly with strategic partners to ensure high-quality integration in downstream manufacturing. Below, we outline core industrial sectors implementing this material, with detailed insights into standards, formulations, operational phases, and end-use products.
Automotive manufacturers integrate HM 7387 to improve the softness and resilience of dashboard skins, door trims, and instrument panel covers. Its elastomeric character facilitates precise vehicle interior moldings while ensuring durability against daily wear and UV exposure. Engineers value this grade for its ability to meet strict fogging, VOC, and aging standards imposed by global OEMs.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Wire and cable manufacturers use HM 7387 to achieve advanced mechanical and electrical insulation properties. The material enhances flexibility and low-temperature performance, enabling reliable protection in both internal vehicle harnesses and industrial power cables. Its unique molecular structure aids extrusion line throughput and surface smoothness, addressing critical safety and longevity demands.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Producers of single-ply TPO roofing membranes select HM 7387 for its ability to improve flexibility, weld strength, and UV resistance. The elastomer supports long-term weathering in harsh climates, reducing cracking and shrink-back in commercial and industrial flat roof applications. Consistency in material rheology enables reliable calendering and weld seam formation during installation.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Shoe component manufacturers exploit the elastic modulus and light weight of this elastomer in EVA and polyolefin midsoles as well as non-slip outsoles. Its compliance with restricted chemical lists and high resilience after repeated compression makes it suitable for premium athletic and safety footwear. Precision dosing provides the right balance of cushioning, abrasion resistance, and cost efficiency for integrated foam and injection-molded assemblies.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Food-grade film producers rely on this POE as a modifier for superior heat sealability, puncture resistance, and clarity in multilayer packaging. Its food-contact compliance renders it suitable for lid stock, pouch, and high-barrier coextruded films. Process engineers tune addition rates according to seal requirements and migration testing, ensuring compliance in direct and indirect contact packaging.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Appliance molders incorporate HM 7387 as an impact modifier into polypropylene and polyethylene base resins for vacuum cleaners, washing machine covers, and refrigerator liners. The material imparts ductility and crack resistance at subzero temperatures while retaining dimensional stability through repeated heating cycles. Consistency and clean dispersion prevent surface defects, supporting high-gloss and textured finish requirements in finished housings.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Competitive ENGAGE Polyolefin Elastomer (POE) HM 7387 prices that fit your budget—flexible terms and customized quotes for every order.
For samples, pricing, or more information, please contact us at +8615365186327 or mail to sales3@ascent-chem.com.
We will respond to you as soon as possible.
Tel: +8615365186327
Email: sales3@ascent-chem.com
Flexible payment, competitive price, premium service - Inquire now!
Manufacturing polyolefin elastomers isn’t just a job to us—it’s a craft, and every decision we make out on the line can change how a finished product behaves in the hands of an end-user. Among our lineup, ENGAGE Polyolefin Elastomer HM 7387 stands out with its ethylene-octene backbone and a balance of softness, flexibility, and resilience. This specific model, HM 7387, draws on advances in metallocene catalysis to blend toughness with elasticity, finding that rare sweet spot that many processors look for but seldom achieve without compromise. We know this from the batches we've run, the tests we've logged, and from feedback directly off the compounding floor.
Years back, the search for elastomers tended to force a choice between flexibility and strength, with older materials either stretching well but snapping under load or holding firm but refusing to give. HM 7387 turns that equation on its head. Through consistent molecular weight distribution and a controlled, uniform comonomer content, this grade resists permanent deformation and recovers its shape even after heavy stress. Processing these pellets, we’ve seen melt flow stability that lets lines run smoother, reducing downtime and scrap. Molded items keep their integrity during handling, and finished parts stay reliable, even under varied temperatures.
Every production manager wants numbers behind the promise, so here’s a closer look at HM 7387’s behavior. This grade clocks in at a melt index that supports injection molding, extrusion, and blow molding lines equally well. It resists flow problems often associated with higher softness by maintaining a narrow molecular weight distribution. As manufacturers, we track tensile strength, elongation at break, flexural modulus, and stress relaxation closely. With HM 7387, tensile measurements run higher than many competing elastomers in this softness bracket. It sits at the lower end of Shore A hardness ranges, but avoids tackiness, so compounded films and molded goods handle easily and don’t stick to machinery or themselves in storage.
In the shop, what impresses the crew is the consistency batch-to-batch. We’ve fine-tuned reactor conditions to keep the molecular structure dialed in, which pays off in fewer color streaks, less batch adjustment, and lower rework rates. When we run HM 7387 on our own lines, the operators know by feel and flow that they can trust this grade for long, uninterrupted runs.
We’ve shipped HM 7387 to customers working in diverse fields from automotive to wire and cable, soft-touch packaging, roofing membranes, and industrial gaskets. There’s no one typical application. In wire and cable, the flexibility and stress-crack resistance stand out, especially for insulation layers where toughness and movement matter. For automotive weatherseals, this elastomer brings a unique blend of low-temperature flexibility and UV resistance, keeping seals effective after years’ exposure to sun, heat, and cold.
In film extrusion—think about tough, puncture-resistant protective films or multilayer packaging—HM 7387 can soften formulations without leaking plasticizer or suffering from brittleness. Operators appreciate its easy dispersal in the melt and its ability to anchor colorants and additives efficiently. Roofing, a market where a material must withstand repeated flexing, high heat, and exposure to chemicals, also puts this elastomer to the test. Roofing membrane engineers tell us they get longer sheet life and fewer failures at the seams when using blends based on this specific grade.
Handling and performance back up every marketing claim for HM 7387. Some processors come to us after long bouts with generic elastomers that tend to “neck down” or deform after stretching, never bouncing back. With HM 7387, there’s actual memory. Draw a sample out, pull it, let go, and you see it snap back—week after week, even after weathering cycles.
Other polyolefin elastomers will often trade off processability for toughness, demanding higher temperatures or longer cycles to achieve comparable results. HM 7387 doesn’t force that compromise. Our teams have dialed in process windows to keep melt stability without excessive die pressure or extruder torque. Not many elastomers in this performance window can claim such smooth running on standard polyolefin equipment, from blown film towers to injection presses.
We’ve also compared HM 7387 directly with older plastomers and even some higher-end thermoplastic vulcanizates (TPVs). A key distinction lies in its lower density and the ability to engineer lighter finished parts without giving up the tactile “rubbery” feel. This has opened up innovation for customers seeking to reduce weight, whether to save shipping costs or to meet new regulatory goals in automotive and construction sectors.
Being in the trenches of manufacturing, we’ve prioritized quality control above all else. Every lot of ENGAGE HM 7387 runs through multiple melt flow and tensile checks, and we adjust feedstock composition only after rigorous review. We’ve invested in advanced sampling on our reactors to catch any drift before it leaves the line, and field feedback flows straight back to our engineers. Our commitment is to uniformity batch after batch, avoiding surprises in processing and ensuring reproducibility on downstream lines.
We use automated pelletizing lines to guarantee steady particle size and reduce dust, minimizing handling mess and loss during pneumatic conveying or blending. Downstream, this means a cleaner operation and more reliable dosing, critical for high-throughput operations striving for ISO compliance.
Operators running bagging or film lines with HM 7387 often point out how smoothly it disperses, delivering blends that won’t clump or create gels. Processing aids and colorants go further, achieving full incorporation without aggressive mixing or excessive screw speeds. This material doesn't give off the smoky, acrid fumes associated with some plasticizers, keeping the air cleaner and downtime for filter changes to a minimum.
On high-speed injection molders, cycle times stay tight since HM 7387 doesn’t slow down the cooling curve like many softer elastomers. Molds pop parts free with a smooth finish—not sticky or glossy, but a tactile, rubbery surface that's in demand for grips, gaskets, appliance components, and seals.
For recycling, we’ve seen scrap from HM 7387-based operations mix seamlessly back into virgin streams with little change in performance. Processors separating out edge trim or offcuts for reprocessing report low gel rates. HM 7387 helps plants close the loop, lowering waste and reducing total cost.
As markets demand lighter, more durable, and more recyclable materials, we know our choices upstream matter for everyone downstream. HM 7387 carries a noticeably lower density than most traditional elastomeric modifiers, helping customers cut weight and lower raw material cost per part. This material stands out in life cycle analyses for its ability to extend the life of products—whether in packaging, sealing, or roofing.
We've tested our resins for extractables, heavy metals, and phthalate-free status, because brand owners keep asking for cleaner, more compliant ingredients. By keeping the backbone chemistry tight, our team delivers a consistent molecular structure that resists degradation—not just in lab testing, but in aging ovens, UV chambers, and outdoor trials.
HM 7387 follows strict food-contact and medical standards, and we support that with in-house certifications and detailed test records. Regulators keep stepping up demands, so we stay ahead by maintaining robust traceability and documentation for every lot shipped. Our safety team reviews evolving guidance on content restrictions and ships only after certifying compliance with each major global regulatory body.
Our technical service teams walk new customers through process optimization steps onsite, guided by first-hand experience on our extrusion, molding, and compounding lines. No generic recommendations—just practical advice on screw geometry, temperature setups, or blend ratios, built on years of running HM 7387 at plant scale. Processors report startup times drop when our tech service experts are in on the commissioning.
No product launch or line trial goes perfectly, and HM 7387 is no exception. Some users once faced gels or unmixed feed, but after tracing issues down to feeder miscalibration or overheating in the extruder throat, we teamed up right at the point-of-use to adjust machine setup. With the right controls in place, gels disappeared and run consistency jumped.
In multilayer film applications, some earlier blends showed layer adhesion issues, especially when formatted for peelable lidding. After conducting shop-floor blend trials with operators, we recommended changes to adhesive content and tweak in layer configuration. Performance on peel strength and clarity met or exceeded targets, and downtime for delamination complaints plummeted.
We scale HM 7387 production with advanced reactor controls and streamlined feedstock delivery. This level of automation keeps throughput high and labor costs down, freeing our operators to focus on process economics and troubleshooting rather than firefighting. Data traceability built into our production database means we catch outliers in real-time, not after an off-spec shipment has already reached a customer.
Supply disruptions have become more common worldwide, pushing us to expand our strategic sourcing partnerships for both feedstocks and logistics. We now maintain redundant supply lines for key inputs, so order fulfillment stays reliable whether demand comes from Asia, Europe, or the Americas.
Our experience with HM 7387 has led us to innovate side-by-side with converters and processors. Automotive component makers wanted lighter, softer parts; with this material, we helped develop new blends that cut part weight and improved fuel economy measures. Wire and cable houses needed better resistance to stress cracking and higher insulation performance; long-term thermal and dielectric trials with HM 7387-based jackets delivered on those numbers.
We collaborate with R&D teams to develop new film structures, foam products, and even hot-melt adhesives. At each turn, the ability to rely on repeatable polymer quality saves time and cost in product development. One specialty films firm was struggling with haze and clarity control until we demonstrated process modifications downstream of HM 7387 blend incorporation; their yield and print quality metrics improved noticeably.
Each year, new demands come from customers adapting to tougher certifications, longer shelf-lives, and higher performance standards. Only through ongoing dialogue do we make the improvements that matter most—switching antioxidant packages, adjusting comonomer ratios, or tightening moisture control in pellet packaging. Field failures almost always point to opportunities, not faults; reinforcing communication channels between our manufacturing teams and processors leads to faster fixes and shared success.
For customers blending HM 7387 on basic single-screw extruders as well as those running multi-component coextruders, real-world results often push our teams to deepen technical support resources. From temperature profiles to screw designs, we use practical experience to help customers get the most out of their investments.
Innovation in elastomer chemistry never stands still. Every time we gather feedback from fast-moving markets, from packaging films to engineered automotive parts, we feed those lessons right back into HM 7387’s development and production. We work to balance performance, sustainability, and processability—not because the market asks, but because that’s how real progress happens in manufacturing. Cleaner, softer, lighter, and tougher materials unlock new possibilities; every new application we help launch with HM 7387 continues to prove that.
Experience shows that listening at every stage of the production process, from polymerization to final pellet inspection, shapes a product’s legacy in the industry. HM 7387 reflects our commitment to performance through high standards, continuous improvement, and a trusting bond between manufacturer and every user down the line.