| HS Code | 354657 |
| Product Name | ELVAX Ethylene Vinyl Acetate (EVA) 260 |
| Manufacturer | DuPont |
| Form | Pellet |
| Color | Translucent |
| Vinyl Acetate Content | 28 wt% |
| Melt Index | 5.5 g/10 min (190°C, 2.16 kg) |
| Density | 0.950 g/cm³ |
| Shore Hardness | A 86 |
| Tensile Strength | 12 MPa |
| Elongation At Break | 800% |
| Flexural Modulus | 14 MPa |
| Melting Point | 68°C |
| Recommended Processing Temperature | 120-210°C |
As an accredited ELVAX Ethylene Vinyl Acetate (EVA) 260 factory, we enforce strict quality protocols—every batch undergoes rigorous testing to ensure consistent efficacy and safety standards.
| Packing | ELVAX Ethylene Vinyl Acetate (EVA) 260 is packaged in 25 kg white polyethylene bags, labeled with product name and manufacturer details. |
| Container Loading (20′ FCL) | Container Loading (20′ FCL) for ELVAX Ethylene Vinyl Acetate (EVA) 260: Approximately 17 metric tons packed in 25 kg bags. |
| Shipping | ELVAX Ethylene Vinyl Acetate (EVA) 260 is typically shipped in sealed, moisture-resistant 25 kg bags or bulk containers. The product should be kept dry, protected from direct sunlight and extreme temperatures during transport. Handling should follow standard chemical safety procedures ensuring packaging remains intact to prevent contamination and product deterioration. |
| Storage | **ELVAX Ethylene Vinyl Acetate (EVA) 260** should be stored in a cool, dry, well-ventilated area away from direct sunlight, heat sources, and incompatible materials. Keep containers tightly closed and protect from moisture and contamination. Avoid storage near strong acids, oxidizers, or bases. Follow local regulations and safety guidelines to ensure safe handling and storage. |
| Shelf Life | ELVAX Ethylene Vinyl Acetate (EVA) 260 typically has an indefinite shelf life when stored in cool, dry, and sealed conditions. |
As an established manufacturer of ELVAX Ethylene Vinyl Acetate (EVA) 260, we supply this raw material to leading industries where precise formulation, strict compliance, and well-defined processing requirements determine the performance of the final product. The following sections highlight our material’s role in real-world downstream sectors, providing application-specific insights for technical and procurement teams considering its integration into production lines.
Producers of hot melt adhesives adopt EVA 260 for its controlled crystallinity and melt index, essential for achieving consistent open time, flexibility, and strong substrate adhesion. This raw material forms the backbone of formulations used in carton sealing, consumer packaging, and the bookbinding sector where product safety, thermal stability, and adherence to food contact regulations are critical. Formulators determine the polymer content based on viscosity targets and peel strength requirements, which can vary between folding carton manufacturers and book production lines.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Cables designed for industrial, construction, and consumer markets require insulation and sheathing compounds with reliable flexibility, electrical resistivity, and flame retardance. Cable compounders select EVA 260 for its balance of toughness and melt processability, manufacturing materials that allow stable extrusion at high throughput and maintain physical properties during wire aging tests. Here, precise resin dosage affects tensile strength, elongation, and dielectric breakdown voltage across wire grades.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Photovoltaic panel manufacturers rely on EVA 260 to fabricate encapsulation sheets that protect solar cells from environmental stress, moisture ingress, and electrical leakage. The resin’s controlled crosslinking behavior under lamination processes assures high optical clarity and adhesion between layers, while maintaining compliance with international PV module reliability and safety standards. Accurate resin formulation is critical to achieve warranted durability over extended outdoor exposure.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Footwear producers in the sports, leisure, and safety segments utilize EVA 260 to generate foamed midsoles and outsoles with controlled density for lightweight shock absorption and flexibility. Manufacturing processes require accurate dosing, as the foam structure and rebound depend on polymer content, blowing agent ratio, and heat profile. Brands require assurance that resin batches conform to chemical safety standards and deliver consistent processing in moulding equipment.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Manufacturers of agricultural and industrial films demand polymers that provide flexibility, tear resistance, and clarity. EVA 260 is selected by film converters for its balance of toughness, weldability, and enhanced cold-resistance properties, especially valued in multi-layer greenhouse films and high-stretch films for pallet wrapping. Production lines tune polymer percentages based on climatic durability and mechanical performance for specific end usage found in agriculture and logistics.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Competitive ELVAX Ethylene Vinyl Acetate (EVA) 260 prices that fit your budget—flexible terms and customized quotes for every order.
For samples, pricing, or more information, please contact us at +8615365186327 or mail to sales3@ascent-chem.com.
We will respond to you as soon as possible.
Tel: +8615365186327
Email: sales3@ascent-chem.com
Flexible payment, competitive price, premium service - Inquire now!
Our team has worked with ethylene vinyl acetate resins for decades, tuning process lines and troubleshooting in the plant so downstream customers can count on every shipment. ELVAX EVA 260 stands apart from generic EVA grades because it reflects refinements learned from thousands of hours of production. Every bag carries the lessons picked up from the extrusion lines, compounding rooms, and feedback from the shop floor.
This EVA 260 resin offers a notable balance between flexibility, toughness, and clarity. Our technical staff has seen it deliver clean, bubble-free runs in film, cable, and coating applications. Specifications list a vinyl acetate content of 28% and a melt index of 25 g/10 min – numbers that might match competing resins on paper. The difference is in the lot-to-lot consistency, purity, and the way the pellets flow through industrial extruders, allowing a steady process with lower risk of build-up, gels, or downtime.
People who have used a range of EVA grades will notice EVA 260’s performance in blending operations. During compounding, masterbatching, or direct extrusion, the resin incorporates pigments and additives thoroughly, without agglomeration. Formulators find that EVA 260 manages to improve the clarity and flexibility of finished products. Lower temperature sealing comes easier, and shrinkage remains predictable, which saves time for operators and reduces off-grade production.
Over the years, our team has fielded questions from operators trying to stretch films thinner, achieve higher throughput on cable coating lines, or push lamination temperatures lower. Their goals often focus on efficiency, lower energy use, and better end-use performance. EVA 260 addresses these needs without introducing unforeseen process issues. Here’s what sets this grade apart in our experience:
We often get asked about the difference between EVA 260 and higher or lower melt index grades. Production managers weighing options for cable jacketing or lamination want to know whether a higher melt index will run cleaner, or whether they need the extra toughness. ELVAX EVA 260 targets that “sweet spot” – it gives higher flexibility than grades in the 18% VA range, yet holds films together under moderate stress and repeated bending.
Lower melt index resins (around 9-10 g/10 min) tend to form tougher, more impact-resistant articles, but our experience shows these can require higher melt temperatures and may not flow as smoothly at the higher throughputs required today. In contrast, high melt index (>40 g/10 min) grades offer extra softness, making them a fit for blend partners or extra flexible films, but risk neck-in, baggy edges, or sealing failures if not handled precisely. EVA 260 occupies a sweet-spot, balancing processability and end product performance without pushing operators into frequent machine readjustments.
For extrusion coating and lamination, EVA 260 improves on clarity and seal performance compared to lower VA-content resins. On-the-floor feedback has shown calender lines and cast film equipment benefit from fewer startups and less scrap, as edge trimming and gauge control stay within target more easily. This resin type also responds predictably to peroxide crosslinking for foam and shoe sole manufacturers, holding expansion and density consistent batch after batch.
We see EVA 260 run in a range of high-demand operations:
Many EVA grades on the market start life at bulk monomer plants, move through traders and resellers, and pick up irregularities along the way. We manufacture EVA 260 at purpose-built lines, tightly controlling ethylene and vinyl acetate feedstock quality. Our process operators, some with over twenty years’ experience, keep their hands and eyes on each batch and react swiftly to maintain spec. That diligence flows into technical support, as feedback from global customers guides recipe adjustments or process trials back on the floor.
Some customers switching from non-integrated supply have shared with us that they dealt with fluctuating melt index or resin yellowing in the past. With EVA 260, those troubles tend to disappear after the plant transitions—evidence that manufacturing discipline and transparency matter as much as process chemistry.
Consistent EVA character comes from both recipe control and investment in production infrastructure. Over more than a decade producing EVA 260, we have seen film and cable manufacturers cut down on material-related complaints. Color dispersion, pellet flow, and surface finish show fewer issues at both startup and long-run conditions. In today’s market, downtime for unplanned screw pulls or batch testing delays can knock entire schedules offline and cost dearly. By keeping impurity levels low and maintaining a tight spec on pellet geometry, EVA 260 helps reduce those risks.
We back every shipment with traceability and quality data built into our workflow. As a result, our technical teams spot trends in resin melt index or pellet density shifts before they become end-use issues. For important export business, this level of transparency supports logistics and customs officials who need paperwork that matches what arrives in the container.
Modern plant operators watch feedstock use closely as sustainability benchmarks shift year by year. EVA 260 starts with certified feedstocks, and we have reined in process energy use through continuous investment in recovery systems and heat integration. Film producers who need greenhouse or tunnel covers routinely question off-gassing and recyclability. Our technical lab keeps up with regulation and supports analysis to ensure customers meet their own requirements in food contact, batch traceability, and low volatile organic compound levels.
The resin’s clarity and controlled branching also mean thinner films and foams are possible with no loss in tear or puncture resistance. Some plants have shifted to lower gauge or density, cutting resin use and downstream transportation loads. By switching to EVA 260, customers report improvement in product performance and production waste reduction, while supporting their own corporate responsibility goals.
We have never stopped tuning our production recipe or answering the “what if we tried…” questions from partner shops and development labs. Several leading cable, packaging, and footwear brands have pushed the envelope with EVA 260; their in-plant feedback shapes every adjustment we make to our process.
A recent example saw a customer in the extrusion lamination sector report minor changes in line tension at higher throughputs. Working together, our engineers tracked the issue not to the resin formula, but to interaction between the resin and an anti-block additive at an elevated masterbatch let-down ratio. Sharing this with all users of that melt index range meant even smaller converters could avoid the same hurdle. This collaborative development continues, so the resin stays relevant as extrusion lines, environmental needs, and market expectations change around us.
We do not rely on standard spec sheets alone. Any time a partner faces a downstream processing challenge—be it uneven dye uptake, stepped haze, or variable sealing—we draw on a long logbook of field experiences. Oftentimes, issues arise at the blending or masterbatch stage: pigment overload, unexpected decomposition, or odd die swell. EVA 260 offers more tolerance to process excursions, meaning more uptime, less maintenance, and predictable product output.
Our support engineers have worked with hundreds of operators transitioning from low-VA, higher density, or even overseas-produced EVA. The similarities vanish during sustained changeovers. EVA 260 helps avoid issues like plate-out or neck-in, and we provide hands-on support to stabilize the transition.
Every sector puts unique stress on materials, but the requirements for consistency, ease of blending, and processing reliability always come through in technical audits and plant visits. Years of supply to global customers give us a depth of feedback that feeds right back into resin design. Partners in Europe, Asia, and the Americas often join in workshops or audits, so the resin evolves from field data, not theory or spec sheet wish-lists.
Where competing EVAs sometimes lead with price or generic descriptions, our focus on field-tested improvements and reliability wins long-term support. End users remember the time saved during a hectic plant expansion, or the outage avoided when a perfectly timed shipment landed just ahead of schedule. Those cumulative practical advantages define what EVA 260 delivers beyond standard polymers.
We see the EVA resin market change year after year. New additive package demands, tougher regulatory curves, and tighter cost controls push us to deliver more with less. By keeping manufacturing under one roof, tracking every input, and investing in both equipment and people, EVA 260 delivers not only stable product, but a genuinely collaborative approach to problem solving.
Every operator, plant manager, and engineer who uses EVA 260 becomes part of a feedback loop. Batch consistency, rapid troubleshooting support, and openness to process feedback put technical control and experience back into the world of high-performance polymers. Whether a customer produces technical films, foams for footwear, or robust adhesive systems, real-world results set this grade apart.
Industrial demands rarely stand still. Customers trust EVA 260 because it reliably meets their evolving needs without constant retuning or reactive firefighting. We act quickly on customer feedback, integrating incremental improvements to stay ahead of new process and market expectations. By keeping a clear view of everything from feedstock sourcing to real equipment trials, EVA 260 stands as a polymer shaped by practical needs—delivering both performance and peace of mind for every operator who counts on it.