| HS Code | 878118 |
| Product Name | ELITE Enhanced Polyethylene (mLLDPE) 5960G1 |
| Manufacturer | Dow |
| Polymer Type | Metallocene Linear Low Density Polyethylene (mLLDPE) |
| Density | 0.917 g/cm³ |
| Melt Flow Index | 1.0 g/10 min (190°C/2.16 kg) |
| Tensile Strength At Yield | 12 MPa |
| Elongation At Break | 700% |
| Dart Impact | 200 g |
| Haze | 8% |
| Gloss | 65 % |
| Recommeded Processing | Blown Film |
| Film Thickness Range | 20 to 100 microns |
| Clarity | High |
| Seal Initiation Temperature | 95°C |
| Stress Crack Resistance | Excellent |
As an accredited ELITE Enhanced Polyethylene (mLLDPE) 5960G1 factory, we enforce strict quality protocols—every batch undergoes rigorous testing to ensure consistent efficacy and safety standards.
| Packing | The packaging for ELITE Enhanced Polyethylene (mLLDPE) 5960G1 is a 25 kg white plastic bag labeled with product details and safety information. |
| Container Loading (20′ FCL) | Container Loading (20′ FCL): ELITE Enhanced Polyethylene (mLLDPE) 5960G1 loads approximately 24 metric tons per 20-foot container, packed in 25kg bags. |
| Shipping | The shipping of **ELITE™ Enhanced Polyethylene (mLLDPE) 5960G1** is typically conducted in pellet form, packaged in 25 kg bags or bulk containers. Materials must be kept dry, protected from sunlight, and stored below 60°C. Standard transport uses covered trucks or containers, following safety and handling guidelines for non-hazardous goods. |
| Storage | ELITE Enhanced Polyethylene (mLLDPE) 5960G1 should be stored in a cool, dry, well-ventilated area away from direct sunlight and sources of heat. Keep the material in its original packaging to prevent contamination and avoid contact with strong oxidizing agents. Ensure storage areas are free from ignition sources and comply with safety regulations for plastics to maintain product integrity and safety. |
| Shelf Life | ELITE Enhanced Polyethylene (mLLDPE) 5960G1 has an indefinite shelf life when stored in cool, dry conditions away from sunlight. |
ELITE Enhanced Polyethylene (mLLDPE) 5960G1 addresses a range of demanding industrial packaging and processing needs, offering enhanced impact resistance, high clarity, and reliable seal performance. Below we detail its proven uses in several core manufacturing scenarios, outlining industry requirements, precise formulation instructions, downstream processing touchpoints, and the specific end-products valued across the professional supply chain.
Manufacturers of logistics and warehousing materials rely on this grade of mLLDPE to achieve high-load retention, puncture resistance, and downgauged films for cost-effective wrapping. Its branched structure supports thin but strong films compatible with both automatic and manual stretch wrapping lines, where retention properties and clarity are critical for efficient operations and load safety compliance.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Major converters in the food packaging sector leverage this material's clean extrusion profile, low gel count, and impact toughness to achieve consumer-safe bags, pouches, and liner films. Assurance in taste and odor neutrality, along with migration compliance, drives adoption for high-throughput operation targeting regulatory-sensitive markets.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Users in construction and waste management benefit from the high dart impact and tear propagation resistance suited to thick-gauge liners and sheeting, ensuring containment of sharp or bulky refuse and reliable performance in challenging handling environments such as demolition sites or industrial plants.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Agricultural film specialists select this resin for its high elongation, UV resistance (when compounded), and seal integrity, supporting the controlled storage of silage and reliable crop protection. Performance in wide-width film blowing and tolerance to outdoor exposure is paramount, especially under variable field conditions and handling demands.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Producers of high-performance laminates depend on the excellent sealability and mechanical strength of this polyethylene for tough industrial sacks, chemical packaging, and multi-layer laminates, where adhesion to substrates like aluminum or PET is required without compromising process speed or seal properties.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Packagers of beverages, cans, and consumer industrial goods utilize this high-strength resin for shrink film requiring controlled shrinkage, toughness, and outstanding weldability to maintain product integrity throughout handling, storage, and shipping. Film clarity and compatibility with high-speed automatic shrink wrap systems drive application success.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Competitive ELITE Enhanced Polyethylene (mLLDPE) 5960G1 prices that fit your budget—flexible terms and customized quotes for every order.
For samples, pricing, or more information, please contact us at +8615365186327 or mail to sales3@ascent-chem.com.
We will respond to you as soon as possible.
Tel: +8615365186327
Email: sales3@ascent-chem.com
Flexible payment, competitive price, premium service - Inquire now!
As a manufacturer deeply involved in high-performance polyethylene, sharing what goes into developing ELITE Enhanced Polyethylene (mLLDPE) 5960G1 feels important—not only for understanding product features, but for recognizing what sets this grade apart in daily manufacturing. We work on the production line, overseeing every step from catalyst selection to polymerization control. Years in this business have taught us that it takes more than lab data or glossy brochures to create something that performs under real processing conditions. ELITE 5960G1 grew out of hands-on challenges faced in film applications such as food, heavy-duty shipping, and hygiene packaging, where not all polyethylene resins are equal.
Launching ELITE 5960G1 drew on our experience with metallocene catalysis—a big step forward from traditional Ziegler-Natta or standard linear low-density grades. Working with metallocene catalysts lets us fine-tune the molecular weight distribution and comonomer placement. These details can escape the eye at a glance, but anyone running blown or cast film lines knows what a difference this makes on the shop floor. Ripple-free extrusion, fewer gels, and reliable thickness tolerance do not happen by accident. At our plant, controllers monitor resin output round the clock, watching for any drift from optimal density and melt index targets. With ELITE 5960G1, we see a density near 0.918 g/cm³ and melt index around 1.0 g/10 min, which means balance—not too stiff, not too clingy, but with enough strength to hold up in harsh drop tests.
We’ve watched operators use lower-end grades cut corners only to get more complaints about punctures or brittle seals. By contrast, metallocene-modified mLLDPE like ELITE 5960G1 brings in strong dart impact and tear resistance, helping packaging survive on the road or in the freezer aisle. Chemistry is the start, but what matters most: every pellet we ship meets precisely the target we promise, and that reliability means fewer headaches for downstream processors.
Processing pellets is just one half of the story. Our own technicians spend hours testing machine settings and blend ratios to verify a grade’s flexibility. ELITE 5960G1 isn’t a rebranding of commodity resin; it’s a tool built to help processors achieve better throughput and fewer line interruptions. Colleagues working high-speed lines often complain about gels, fish eyes, and gauge bands. With this metallocene grade, we see noticeably cleaner film rolls and smoother die response—the internal gel count stays low because the production system holds much tighter control over catalyst dispersion and cooling rates.
A key complaint we’ve helped solve is about films tearing at the seal or letting in air and moisture. With ELITE 5960G1’s puncture and tear resistance, the difference translates into longer-lasting bags and improved load security, especially for unitizing heavy goods or food products requiring tough protection. Down the chain, less material breaks means less rework, and ultimately less waste.
Performance can’t be separated from the way people actually use the resin. We focus on blown and cast film producers, both large and midsize, who push for maximum output without sacrificing film toughness. Films made from standard LLDPE sometimes develop pinholes or haze—problems that slow down packaging lines or raise food safety concerns. ELITE 5960G1’s clarity and toughness come from the narrow molecular weight distribution typical in well-managed metallocene processes. The result is film where light transmission and gloss keep packs looking sharp and labels readable, and where contamination or visible eye sores are far less common.
Our customers use ELITE 5960G1 for stretch films, specialty packaging, industrial liners, and cling-wrap for large scale shipping units. In all these uses, the product’s high sealing strength and toughness translate into better shelf-appeal and shipping reliability, allowing users to replace multi-layer blends with simpler, more consistent runs.
Listening to customer feedback changes the way we refine our resin. Major complaints—the type that tie up production lines on a Friday—often trace back to the resin blend. With ELITE 5960G1, customers have reported fewer interruptions caused by die lip build-up, better overall throughput, and improved seal quality over time. Regular film grades using older catalysts might work for commodity liners but begin to break down with lighter gauges or higher load requirements.
From injection point to chill roll, ELITE 5960G1 holds its melt strength reliably, even on the latest automated extrusion lines. This point matters most for lines turning out thin-gauge film. The difference becomes clear in lower neck-in, tighter windings, and less need to adjust line speed due to “web breaks.” On heavy gauge, the toughness keeps loads intact from warehouse to final destination. Whether bags carry mulch, grains or frozen vegetables, customers see fewer product returns from broken packaging, reducing both loss and reputational hassle.
It’s easy to lump mLLDPE grades together, but there are clear differences at both the plant and user levels. Decades ago, we manufactured standard Ziegler-Natta LLDPE, and the matter of film clarity, impact strength, and overall process consistency was a game of guessing and blend tweaking. With ELITE’s mLLDPE 5960G1, made over carefully controlled modern reactors, we see a sharp drop in in-film gels and a boost in dart impact numbers. Melt flow behavior stays predictable across long extrusions, providing the stability needed when blending with color concentrates or secondary modifiers.
A lot of packers once relied on tough blends containing LDPE to counteract the stiffness or lack of clarity in old LLDPE lines. Here, ELITE 5960G1 brings both clarity and toughness in a single product—fewer blend components and a more reliable finished good. We’ve seen film lines swap out expensive impact modifiers and switch to 5960G1 alone. Output remains high, waste rates drop, and output film stands up to heavyweight shipping tests.
One striking thing from production customer feedback: not all metallocene grades handle the same way. Our process team spent over a year collaborating with film converters, running head-to-head comparisons between 5960G1 and other widely available grades. The reports were clear—our grade shows better resistance to extrusion instability, where lines often see bubble fluctuations or “sharkskin” surface effects due to inconsistent flow.
During our own long-run assessments, crews noticed melt pressure remains steady, and film lines could operate at higher speeds without generating roll edge wrinkles. This kind of process stability pays off directly: shift supervisors can run larger batches without stoppages for die cleanings. Quality control also picked up on fewer complaints about film odor or taste transfer in food packaging, a difference that comes from the extremely clean catalyst system used in 5960G1 production.
We pay close attention to regulatory compliance throughout development, as requirements for food contact and environmental safety keep tightening. Before scaling up 5960G1 for commercial use, our product stewardship group worked through migration and extractable testing to stay ahead of changing standards in North America, Europe, and parts of Asia. Processors in critical packaging roles benefit knowing we can provide documentation for migration limits and impurity profiles, all based on thorough batch analysis.
In practical terms, this means customers using 5960G1 can supply for food wrap, meat bags, and frozen goods packaging with more confidence, knowing the resin will not release unwanted substances or taint wrapped products. Our own in-house analytics confirm this point before every bulk shipment leaves the plant. Supermarkets increasingly request verification of food safety and shelf-life claims; with proper documentation and a tightly manufactured metallocene grade, our clients are well positioned to meet these demands without expensive requalification testing.
Nearly every packaging producer faces mounting pressure to reduce waste streams and increase recycled content. We know from our own partnerships how tough it is to find resins that keep film tough and clear, yet recycle cleanly. One difference with ELITE 5960G1 is that its melt flow consistency and strength allow it to blend well with reprocessed materials without serious drop-off in key mechanical properties. This means converters can include post-industrial or post-consumer reclaim streams for downgauged bags or films, supporting circularity and meeting increasingly strict buyer requirements.
In our own manufacturing, we look for resins that do not “yellow” or break down with multiple melt histories—a factor directly relating to resin purity and the choice of catalyst. ELITE 5960G1’s modern process greatly reduces by-products that cause discoloration during repeated cycling, leading to brighter, clearer films and higher usable yields from each batch. Offering such properties isn’t about greenwashing—it’s what makes the resin a practical ingredient for converters chasing zero-waste goals.
Product developers and industrial designers search for a balance between cost, performance, and appearance. No one can afford to compromise package visibility for strength, nor lose package toughness while chasing downgauging. With ELITE 5960G1, we actively work alongside these creators—supplying technical guidance, trial samples, and troubleshooting advice. Through direct engagement, we’ve helped lines reduce film gauges and resin costs, or shift packaging to mono-material constructions. As e-commerce and food safety pressures grow, packaging engineers have to demonstrate that lightweight films will not puncture in transit or degrade shelf life. The performance profile of 5960G1 gives more room for creative, cost-effective design.
Introducing a new polyethylene grade never ends with the first shipment. Every batch that rolls off our lines is one more proof point of what good manufacturing practice can achieve. Internally, we constantly check for drift in molecular features, fines content, and melt flow, feeding customer findings back into process improvements. What our team has learned from close collaboration—sitting on site, doing lab analyses, comparing real shipment samples with reference lots—pushes us to keep every lot as good or better as the last.
We invest in advanced reactor technology, in-line quality control, and close partnerships with end users because the field never stands still. As application challenges change—whether in food safety, package sustainability, or automated packaging lines—ELITE 5960G1's consistent, tough, and clean-performing resin continues to set itself apart. Every day in our plant, we see first-hand how much trust depends on resin reliability, and delivering that trust is what motivates our team on every shift.
Encountering challenges as a manufacturer, rather than a middleman, means taking direct responsibility for any problems. If a customer reports processing trouble, a seal defect, or haze where it does not belong, investigation starts at our own lines. Problem-solving for ELITE 5960G1 doesn’t focus on blaming operators or shifting the issue elsewhere. Our teams pull historical run data, sample competitor products, and adjust variables directly on our reactors. Feedback from converters and packers is not an inconvenience—it shapes the next evolution of our polyolefin lineup.
Pride comes from shipping a resin that operators recognize as straightforward to process, sales teams trust to deliver the needed shelf-appeal, and quality managers rely on for batch-to-batch repeatability. As a manufacturer, every success story, every return customer, and every innovative film outcome ties back to the expertise and attention invested at every production stage. ELITE Enhanced Polyethylene (mLLDPE) 5960G1 stands out as a direct result of this commitment—from raw catalyst to final pellet, it enables films that look better, last longer, process faster, and answer real-world packaging needs.