| HS Code | 557076 |
| Product Name | ELITE Enhanced Polyethylene (mLLDPE) 5401 |
| Density | 0.917 g/cm³ |
| Melt Index 190c 2 16kg | 1.0 g/10 min |
| Type | Metallocene Linear Low Density Polyethylene (mLLDPE) |
| Tensile Strength At Yield | 11 MPa |
| Elongation At Break | 700% |
| Dart Impact | 175 g |
| Haze | 9% |
| Gloss 45 Degree | 72 |
| Melting Point | 125°C |
| Flexural Modulus | 200 MPa |
As an accredited ELITE Enhanced Polyethylene (mLLDPE) 5401 factory, we enforce strict quality protocols—every batch undergoes rigorous testing to ensure consistent efficacy and safety standards.
| Packing | The chemical "ELITE Enhanced Polyethylene (mLLDPE) 5401" is packaged in 25 kg moisture-resistant, white polyethylene bags with clear product labeling. |
| Container Loading (20′ FCL) | The 20′ FCL container typically holds about 27 metric tons of ELITE Enhanced Polyethylene (mLLDPE) 5401 resin, securely packaged. |
| Shipping | ELITE Enhanced Polyethylene (mLLDPE) 5401 is typically shipped in 25 kg polyethylene bags, palletized and stretch-wrapped for stability. Bulk shipments can be arranged via hopper trucks or containers. The product should be stored and transported in a cool, dry environment, away from direct sunlight and sources of ignition to maintain material integrity. |
| Storage | ELITE™ Enhanced Polyethylene (mLLDPE) 5401 should be stored in a clean, dry, well-ventilated area, away from direct sunlight and sources of heat to prevent material degradation. Keep in original, tightly closed packaging to avoid contamination. Protect from moisture and excessive dust. Avoid contact with strong oxidizing agents. Ensure storage conditions are consistent with good industrial hygiene and safety practices. |
| Shelf Life | ELITE Enhanced Polyethylene (mLLDPE) 5401 has an indefinite shelf life when stored unopened, in dry, cool, and covered conditions. |
As the original manufacturer of ELITE Enhanced Polyethylene (mLLDPE) 5401, we supply this advanced material directly to key sectors with stringent performance, safety, and compliance demands. The following sections outline core downstream manufacturing scenarios where this grade is regularly specified, highlighting formulation rationale, integration details, and regulatory adherence in each use case.
High-performance PE 5401 forms the structural backbone for machine and manual stretch wrap films used in logistics and secured goods transportation. Its high tear and puncture resistance, combined with balanced stretchability, make it vital in multi-layer film extrusion lines operated at demanding speeds. Converters rely on this grade to maintain load stability in variable warehouse and shipping environments.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Our polyethylene is incorporated into coextruded film structures for frozen and chilled food wraps requiring both mechanical strength and low-temperature flexibility. Film converters select this grade to improve heat-seal integrity, puncture resistance, and to comply with international direct food contact protocols for ready-to-eat packaging.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Leading agricultural film manufacturers implement ELITE polyethylene to address seasonal field wrapping requirements, where UV durability, elongation, and oxygen barrier hold critical importance for forage preservation. This material supports advanced multi-layer wrapping structures designed for modern baling equipment, optimizing crop protection and storage.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Industrial sheet and hood manufacturers adopt our enhanced polyethylene for heavy load applications such as pallet shrink wrapping and in-transit industrial component protection, demanding strength, clarity, and puncture performance at reduced gauge. This material ensures cost-effective gauge reduction while complying with varying global recyclability mandates.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Medical packaging converters rely on the consistent high cleanliness and melt flow properties of our PE for manufacturing sterile pouches and barrier wraps that must withstand autoclave, gamma irradiation, and ethylene oxide sterilization. Reliable sealing and particle cleanliness underpin its adoption for device and diagnostic packaging under controlled conditions.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Flexible packaging converters depend on ELITE polyethylene for the core or sealant layer in complex laminate structures, maximizing toughness with low-seal initiation temperature. This application involves frequent high-speed lamination and print runs for snack foods, dry food pouches, and personal care packaging, where shelf-life and machinability drive formulation choices.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Competitive ELITE Enhanced Polyethylene (mLLDPE) 5401 prices that fit your budget—flexible terms and customized quotes for every order.
For samples, pricing, or more information, please contact us at +8615365186327 or mail to sales3@ascent-chem.com.
We will respond to you as soon as possible.
Tel: +8615365186327
Email: sales3@ascent-chem.com
Flexible payment, competitive price, premium service - Inquire now!
Twenty years at the reactor and extruder have taught us that not all linear low-density polyethylenes tell the same story. Amid tight margins, demand for quality rises. We’ve focused on this reality with ELITE Enhanced Polyethylene 5401, a metallocene-catalyzed resin purpose-built with both processors and end-users in mind. Every pellet aims for exceptional clarity, toughness, and seal integrity, the trio modern converters call for in flexible film markets.
ELITE 5401 isn’t a routine mLLDPE. In the lab and on our blown film lines, this grade demonstrates strong dart impact resistance without giving up puncture strength. For downstream film converters, it makes sense where downgauging matters. Lowering thickness targets saves resin costs, but only if mechanical properties hold up. We’ve run 5401 in bags, liners, and pouches designed for heavy-duty shipment and high-speed packaging—films that see dragging, scraping, or rough handling in supply chains.
In pallet liner trials, films loaded with 5401 reach higher toughness compared to older Ziegler-Natta grades. Side-by-side runs show fewer tears even at 25% lower film gauge. This improvement comes from tailored molecular weight distribution and the right balance of short-chain branching. These technical points only matter if they translate to faster runs, fewer web breaks, and less waste. We run regular multi-day extrusion campaigns, tracking roll consistency, measuring haze, puncture force, and hot-tack strength. Each lot holds the tight-shrink profile and slip properties our operators count on.
Many films today aim for either clarity or toughness, but not both. In our experience, ELITE 5401 bridges this gap—opacity drops, but tensile growth keeps up. Back in our R&D center, film made with this resin steadies optical clarity while maintaining force at break above benchmark grades. In cold storage bags, this performance keeps packaging from “whitening out” when stretched or dropped. Customers report seeing improved shelf appeal in produce wrap and bakery packaging due to the clarity benefit, without the murky haze that plagues older resin grades under high draw.
Sealability stands out in fast-packaging operations. 5401 flows and seals at lower jaw temperatures which helps avoid burn-through even as line speeds ramp. We run multiple sealing profiles and gather data on seal initiation temperature and hot-tack holding force. Higher hot-tack gives operators the flexibility to cut and stack bags quicker, without stringy seals or split seams. Downtime related to seal changeovers drops noticeably. This is not just anecdotal; we have year-over-year yields tracking higher tonnage throughput as a direct result of the resin’s consistency.
Traditional LLDPE grades built from Ziegler-Natta catalysts often run into trade-offs: stretch performance or clarity, stiffness or toughness. With metallocene-catalyzed ELITE 5401, microstructure design opens a broader window. Short-chain branching comes under exacting control. Polymer chain uniformity brings resilience under both impact and puncture. We spend less time compensating for resin variability on the extrusion line. MDO films and three-layer coextrusions, notoriously demanding for resin performance, run smoother and faster with this grade.
The tactile difference between older resins and ELITE 5401 shows up in finished goods. Films with this resin run more quietly and resist tacky surfaces. On lines where product regrind typically plagues clarity, incorporating ELITE 5401 maintains haze within spec and preserves line speed. In actual plant experience, operators see a reduction in edge-tear complaints from downstream users. Bulk bags, stretch hoods, and heavy-walled sacks finished with this grade come off the line with consistent weld strength and attractive optical properties.
Our customers push us to find films that meet transport challenges without sacrificing presentation. Produce films meet cold-chain demands, shrink wrap needs to retain strength over long-haul trips, and e-commerce packaging faces stacking, crush, and drop tests. ELITE 5401 serves these applications by combining dart impact values above 250 grams in typical 30-50 micron films and high puncture resistance. We see these values translate to fewer field complaints, less over-packaging, and more confidence in downgauging projects.
The resin also adapts well to advanced processes. We supply converters running five-layer and seven-layer blown lines, where inter-layer adhesion and melt uniformity matter. ELITE 5401 anchors the core or skin layer, augmenting EVOH or PA barrier structures with added toughness. Even on high-output cast film lines, melt strength matches those of traditional LLDPE without demanding lower run speeds or frequent die cleaning. This speaks to both the catalyst technology and the strict production protocols we keep on our polymerization trains.
Technical data can sound impressive, but the true test for any polyethylene comes on the factory floor. In three years of data collection, our own finishing lines showed less than 1.5% off-spec rolls attributed to 5401 compared to rates almost double for older grades, mostly tied to out-of-bounds haze or abnormal gauge bands. In converter plants, operators switching to this resin reported up to a full shift saved each month due to fewer resin changes, roll stops, or troubleshooting adjustments. We build this kind of feedback into long-term formulations, making performance improvements rooted in shop-floor realities.
End-users see the impact at the loading dock, not just the extrusion hall. Fewer damaged bags translate to lower claim rates and less product loss in transit. Customers running vertical form-fill-seal machines, as well as those producing mailer films or magazine wraps, highlighted a drop in static charge buildup and improved slip properties. These small operational gains multiply across thousands of tonnes each year, cementing the resin’s actual value in daily use.
Brand owners have grown more aware of packaging’s role in sustainability. Everyone wants thinner films that save material and cut down plastic waste, but not at the expense of finished goods’ toughness or clarity. For designers pursuing stand-out branding—readable labels, unclouded windows, tight-shrink sleeves—ELITE 5401 brings a platform to lift the presentation while keeping protective qualities. We’ve developed in-house protocols to optimize additive inclusions, slip- and anti-block agents, matching each film run to the actual performance required, not just theoretical values.
A shift toward circularity in plastics also puts recycled content into focus. In multi-layer coextrusions, adding recycled PE can negatively affect clarity and mechanical strength. Using ELITE 5401 as a primary layer, this drop gets minimized due to the resin’s higher melt strength and flexibility. Several customers working toward post-consumer resin (PCR) targets have reported successful 10–25% PCR incorporation without losing the optics or toughness needed in their finished films. This is a big step towards reconciling cost pressure, green mandates, and processing stability.
As a manufacturer, we see resin selection ripple down the supply chain. A 5% downgrade in film thickness saved our customers six and seven-digit sums per year in raw material cost, but only because the mechanical properties of ELITE 5401 stood up to scrutiny. The supply chain wins when the same reel of film can run across multiple lines—grocery bag machines, shrink sleeves, or pallet wraps—without unique resin blends for each task. Inventory headaches drop, and plant purchasing can optimize procurement rather than firefighting resin shortages or product mismatches.
We also see payback in process uptime. ELITE 5401’s narrow MI (Melt Index) range, controlled density, and stable slip behavior reduce the surprises faced by machine operators. Roll changeovers get easier, and complaint rates on haze or gauge slip off. In practice, this means more time extruding and less time troubleshooting or making emergency adjustments. The product’s predictability brings real savings that paperwork or marketing claims never capture.
ELITE 5401 steps apart from commodity C4 or C6 LLDPEs. Where most standard blown film resins produce adequate strength, this grade handles abuse from shipping and retail with lower likelihood of starbursts, pinholes, or zipper ruptures. We verify this across dozens of pilot and multi-shift campaigns. Our experience shows metallocene-based polyethylene reaches greater stress-crack resistance and cold peak impact, especially important for freezer and refrigeration applications.
Another contrast sits in optical performance. Films derived from C4 LLDPE often carry a milky hue, especially at lower gauges. 5401 lays down crystal-clear layflat film, a key advantage for applications demanding shelf presence and transparency, such as bakery or deli wraps. Converters appreciate reduced die build-up, which keeps downtime low and transition between SKUs smooth. Anti-block and slip additives behave more consistently in this matrix, pulling highly competitive COF (Coefficient of Friction) values batch to batch.
On visits to converter plants, operators talk about wasted resin and line stops more than catalyst chemistry. Our aim with 5401—and the broader ELITE series—was to create a polymer that runs wide, adapts to new line speeds, and forgives minor process miss-steps. Partners running bag machines on triple shifts have sent data showing hundreds of hours of uninterrupted runs. Our logistics teams can build buffer stocks around that level of certainty, minimizing stop-gap measures and emergency resin shuffles that disrupt cost efficiency.
Major packaging houses use 5401 not only for its film properties but also for the reliability it brings to active production schedules. It supports rapid restarts after maintenance; its pellets convey cleanly, limiting dust and feed anomalies. In bag and liner converting, where core adhesion and side-weld strength matter, 5401’s consistent molecular architecture prevents sneak-through failures that often get missed until goods reach the warehouse. Warehouses have noted longer storage times without slip loss or blocking under tested storage scenarios, reducing scrap.
Safety and compliance requirements keep tightening; end-users in contact-sensitive applications require assurance on food and medical safety. We run all production under global food contact protocols, and track migration limits per EU and North American guidelines. Clean production facilities, scrupulous batch documentation, and annual audit cycles give both us and our users confidence in the resin’s fitness for food packaging, medical drapes, diaper films, and similar uses. No detected odor transfer, no surface blooming problems, and no off-test migration values—this is a result of vigilant QC and resin design, not luck.
On the sustainability front, customers want data on energy consumption and scrap rates. We keep annual records showing lower overall energy use per tonne during extrusion and fewer defective rolls with 5401, both compared against common LLDPE. Fewer reworks mean less scrap, less landfill, and a tighter process. We are also working with partners on enzyme-accelerated degradation technologies in select markets, and 5401 grades pass initial trials for compatibility with these advances, heralding a future of high-performance, lower-impact films.
Commercial packaging never stops evolving. As requirements tighten for lighter, cleaner, and tougher films, we aggregate performance data, customer feedback, and in-house test results. Each resin lot produced gets chemical fingerprinting, and field complaints feed directly back into our product design loop. This means each batch of ELITE 5401 reflects operational, not just laboratory, improvement. Partners can expect up-to-date support, not piecemeal fixes for old problems. This tradition of closed-loop improvement isn’t abstract—it’s the reason our shop crews trust 5401 as a workhorse resin.
From our perspective, successful film packaging builds on partnerships where the resin producer understands the real constraints of large-scale converting: run speed, downtime, complaint rates, and cost predictability. With the ELITE 5401 grade, we offer not just a polymer, but a decades-deep commitment to making sure polyethylene remains a viable, competitive, and sustainable choice amid changing market pressures.
In the end, film packaging relies on properties that matter in the field. Clarity allows shelf products to draw consumer eyes; toughness protects goods from supply chain abuse. Reliable sealing means fewer recalls or customer complaints. ELITE Enhanced Polyethylene 5401 stands as our answer to these daily challenges—a result of ongoing dialogue between resin chemistry, line operators, and brand owners working to meet the world’s packaging needs without compromise. The results speak through every bag off your line, every shift without a stoppage, and every delivery that arrives intact.