Dow Inc

Products

DOWLEX Linear Low Density Polyethylene (LLDPE) 2098P

    • Product Name: DOWLEX Linear Low Density Polyethylene (LLDPE) 2098P
    • Factroy Site: Yudu County, Ganzhou, Jiangxi, China
    • Price Inquiry: sales3@ascent-chem.com
    • Manufacturer: Dow Inc
    • CONTACT NOW
    VTB
    Specifications
    HS Code 522315
    Product Name DOWLEX Linear Low Density Polyethylene (LLDPE) 2098P
    Manufacturer Dow
    Material Type Linear Low Density Polyethylene
    Form Pellet
    Density 0.918 g/cm³
    Melt Flow Index 190c 2 16kg 2.0 g/10 min
    Tensile Strength At Yield 11 MPa
    Elongation At Break 700%
    Flexural Modulus 210 MPa
    Dart Drop Impact Strength 110 g
    Vicat Softening Point 94°C
    Typical Applications Film extrusion for packaging, liners, and bags

    As an accredited DOWLEX Linear Low Density Polyethylene (LLDPE) 2098P factory, we enforce strict quality protocols—every batch undergoes rigorous testing to ensure consistent efficacy and safety standards.

    Packing & Storage
    Packing DOWLEX LLDPE 2098P is typically packaged in 25 kg (55 lb) white polyethylene bags, labeled with product name and manufacturer.
    Container Loading (20′ FCL) Container Loading (20′ FCL) for DOWLEX LLDPE 2098P: Approximately 26 metric tons packed in 25 kg bags, palletized or non-palletized.
    Shipping DOWLEX Linear Low Density Polyethylene (LLDPE) 2098P is typically shipped in pellet form, packed in 25 kg bags or bulk containers. It should be stored in a cool, dry, and well-ventilated area, and kept away from direct sunlight, heat sources, and strong oxidizers to maintain product integrity during shipping and storage.
    Storage DOWLEX Linear Low Density Polyethylene (LLDPE) 2098P should be stored in a cool, dry, well-ventilated area, away from direct sunlight and sources of heat or ignition. Keep bags tightly sealed to prevent contamination and moisture absorption. Stack according to supplier recommendations to avoid deformation. Avoid storage near strong oxidizing agents. Product shelf life may be impacted by improper storage conditions.
    Shelf Life DOWLEX LLDPE 2098P has an indefinite shelf life if stored in cool, dry conditions, away from direct sunlight and contaminants.
    Application of DOWLEX Linear Low Density Polyethylene (LLDPE) 2098P

    Applications of DOWLEX Linear Low Density Polyethylene (LLDPE) 2098P in Industrial Manufacturing

    DOWLEX LLDPE 2098P supports a wide range of industrial manufacturing sectors where critical material properties—such as puncture resistance, high tensile strength, process control, and regulatory compliance—are primary drivers in daily operations. We supply this resin directly for downstream transformation into value-added industrial and consumer products that require precise formulation, standardized compliance, and reliable production integration. Below, we detail specific use cases with real-world compliance demands, formulation guidance, process integration points, and key finished product categories.

    1. Food Packaging Films (Blown Film & Cast Film Processes)

    The resin consistently delivers the mechanical performance and process stability essential for producing mono- and multi-layer food-grade packaging films that safeguard goods throughout extended distribution chains while maintaining required regulatory classifications for direct food contact. Film converters appreciate its melt flow control and draw-down for thin-gauge applications.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    2. Industrial and Consumer Trash Bags (Heavy Duty & Institutional)

    Processors in the waste management and institutional cleaning sector choose this grade for producing tear-resistant, high-dart-strength trash bags used for demanding load and sharp-object containment. It enables downgauging for material savings while meeting strict breakage and opacity requirements imposed by public and private institutional buyers.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    3. Agricultural Silage and Mulch Films

    Manufacturers supplying the agri-tech sector use this resin to produce silage wraps and mulch films that resist UV degradation, puncture, and tearing during application in the field. The ability to control film thickness and elasticity ensures prolonged soil and silage protection under variable outdoor conditions.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    4. Stretch Hood and Pallet Wrapping Films

    Industrial packagers use this grade to deliver automated, high-clarity stretch hood and pallet wrap films with superior holding force, minimizing product movement and moisture ingress during logistics. Consistent extrusion performance supports uniform film winding, required by high-speed packing lines.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    5. Flexible Chemical Drum Liners and Bulk Bag Liners

    Producers of liners for bulk packaging of chemical powders, granules, and liquids specify this grade where resistance to stress cracking, chemical inertness, and clean peelability are key. The upstream resin quality supports rigorous downstream film-to-liner conversion for sensitive chemical and pharmaceutical logistics.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    6. Specialty Collation Shrink Films (Multi-Pack Beverage & Consumer Goods Wrapping)

    Downstream flexible film converters rely on this resin to produce shrink film wraps for multipack bottles, cans, and cartons, where toughness and controlled shrinkage maintain load integrity through high-shear heat tunnels and retail shelf stocking. The ability to maintain optical clarity also ensures strong product shelf-impact.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    Free Quote

    Competitive DOWLEX Linear Low Density Polyethylene (LLDPE) 2098P prices that fit your budget—flexible terms and customized quotes for every order.

    For samples, pricing, or more information, please contact us at +8615365186327 or mail to sales3@ascent-chem.com.

    We will respond to you as soon as possible.

    Tel: +8615365186327

    Email: sales3@ascent-chem.com

    Inquiry

    Get Free Quote of Dow Inc

    Flexible payment, competitive price, premium service - Inquire now!

    Certification & Compliance
    More Introduction

    DOWLEX LLDPE 2098P: Polyethylene Straight from Our Production Floor

    Meeting the Challenges of Modern Film Applications

    Every batch of DOWLEX Linear Low Density Polyethylene 2098P starts its journey right here in our polymerization line. This grade has made a name for itself with processors who expect toughness and clarity from their film, especially in flexible packaging, agricultural films, liners, and industrial sacks. We developed this version through years of tuning catalyst systems and process temperatures to fine-tune impact resistance and tear strength, while still allowing processors to run wide-mouthed extrusion dies without worrying about bubble breakages or blockages.

    No two LLDPEs ever act quite the same once molten in the extruder barrel. DOWLEX 2098P forms a strong, puncture-resistant film at both thick and thin gauges. It settles smoothly into blown film lines, matching high output needs but also keeping gauge variation low, even at fast line speeds. This reliability became especially distinct once packagers started pushing for thinner films without sacrificing load-carrying ability—for pallet wrap, for example, we saw consistent down-gauging by nearly 20% compared to blends using generic C4 LLDPE. Our customers noticed fewer complaints about rips during transport and minimal neck-in, an important detail for those dealing with precise bag cutting or printing.

    What Sets This Grade Apart

    Many polyethylene films are based on older, high-pressure technology, and you can usually feel the difference right in your hands. DOWLEX 2098P keeps a tough backbone due to its hexene comonomer chemistry. The longer branches give a smooth balance between impact strength at low temperatures and flexibility at higher stretch states. In pallet stretch wrap tests, the film survives heavy corner loads and stays clear, never fogging after prolonged storage. Retailers and shippers looking for a glossy, strong, and food-safe film only saw failure at stress levels far outside regular handling.

    No additive package—no matter how sophisticated—will compensate for brittle resin. We use a controlled molecular weight distribution, keeping gel levels low so processors can reach even thin target gauge without gel defects. Lower gels mean better print surfaces, sharper details, and fewer complaints from downstream printers who coat the film further. It also allows converters to run higher regrind levels back into the blend, something that helps thrifty buyers close the loop with their own in-house scrap.

    Applications That Demand More

    We have watched DOWLEX 2098P excel in a broad sweep of flexible packaging lines across Asia, Europe, and the Americas. Vegetable and produce bag lines, keen to keep cost-per-unit low, run it to get higher bag yields per kilogram. Industrial sacks manufacturers need high dart impact and puncture strength as workers fill, drop, and transport heavy loads. Shrink wrap lines look for tight, crisp shrink behavior without splitting under tension. Our regular processors report lower downtime due to cleaner die faces and excellent seal strength, critical when every extra seal failure at the end-user’s facility can translate to customer returns.

    This grade’s slip and anti-block balance gives trouble-free winding on high-speed lines. You notice this especially on wide-width agriculture film, where blocking inside a storage roll is both a nuisance and a waste of time. Some grades run sticky and lead to lost rolls in humid conditions, but with DOWLEX 2098P, our experience shows little tack buildup in the final windup.

    Comparing DOWLEX 2098P with Other Polyethylenes

    LLDPE families are not created equal. Conventional low-density options, made by high-pressure processes, relax easily but tend to tear just when load handling is most intense. On the other end, high-density polyethylene gives higher stiffness, suited for rigid applications but lacking in flex cracking resistance over many cycles of use. For flexible packaging, neither can match the toughness/flexibility balance that this DOWLEX grade strikes.

    C4-based LLDPEs, still commercially prevalent, use butene instead of hexene. This small change affects every step in the process—melt strength during blowing, stress-cracking during use, and even optical clarity in finished goods. Thin films produced on older C4 lines often dull under warehouse lighting; even with high loading, haze can obscure retail artwork or barcode scanners. DOWLEX 2098P, by comparison, relies on controlled hexene branching, delivering films that remain glossy and bright.

    Material blends using 2098P often run with less LDPE or EVA, since the impact resistance and sealing windows are broader. This translates to less complex mixing, lower energy use, and a reduced load on the extruder at the same throughput. Edge stability in bubble extrusion stays high at elevated outputs. For those transitioning from older C4 LLDPE, our lab tests showed film toughness increases between 10 and 20%, depending on gauge and process settings, at the same melt flow rate.

    Inside the Manufacturing Process

    We keep strict control over input streams, using only established catalyst types and tightly managed monomer addition. In practice, this means processors can rely on every pellet carrying essentially the same distribution of branch length and density. Batch-to-batch variation is minimal, important for those who dial in automated gauge control and expect little drift shift-to-shift. Crooked distribution leads to gels and die streaks; since switching to this grade, processors talk about longer die face run times, fewer shutdowns, and easier changeovers—cutting raw downtime costs by several percent over the course of a season.

    Pellet shape and bulk density seem like small details, but in high-volume blown film shops, they cause headaches if ignored. We optimize for consistent pellet cut, which prevents bridging in the hopper and improves feed regularity, especially at high drawdown speeds. Any shift in pellet density sends ripples through the whole system—draw tension, die swell, bubble stability. Better pellet handling means lower operator intervention and continuous, uninterrupted production. Over time, these savings add up to real boosts in plant output and fewer weekend maintenance calls.

    Compliance and Life Cycle Responsibility

    Film producers in food contact sectors have specific regulatory hoops to clear. DOWLEX 2098P meets the necessary requirements for food contact, as evidenced by ongoing compliance audits both within our own facilities and by independent testing groups. Every time food safety rules adjust, our R&D team reviews and tweaks the formulation as needed, guaranteeing peace of mind for both processors and end users.

    As the industry moves towards recyclability, more customers ask for grades that blend easily with post-consumer resins. Experience showed us that films made from our 2098P survive multiple melt histories without significant performance loss. Down-gauging drives material savings, and resilience through recycling cuts waste further—attributes that matter increasingly to both processors and buyers facing legislative waste targets.

    Better Performance Under Pressure

    Packaging lines face their hardest tests at the point where films seal, stretch, and hold weight. DOWLEX 2098P holds seals under typical heat-bonding ranges, with broad enough windowing that lines do not jam—or spit out unsealed bags—during temperature drifts or after maintenance stops. Thick sacks see lower rates of pinholing, which helps industrial packagers meet customer contracts without manual inspection overruns.

    For agricultural customers, sun, heat, and stress are daily realities. We have tracked field performance for multi-season greenhouse films, mulching rolls, and silage wraps produced from this resin. Films maintain color and clarity with only minor embrittlement after long UV exposure—extending field lifespans and reducing the need for early film removal.

    Solving Day-To-Day Processing Challenges

    Processors battle raw polymer variability more often than many users realize. Differences in pellet quality, gel content, or even slight density variation wreak havoc on line efficiency. Several of our packing house partners told us about improved throughput and stability after locking in DOWLEX 2098P, simply because the resin stayed consistent across orders, even months apart. Reliable resin lets operations run leaner, cut back on overordering safety stocks, and meet production promises with confidence.

    Dust build-up and fines form a hidden, ongoing cost in any extrusion operation. Off-grade pellets split and abrade during handling, leaking fines into hoppers and causing occasional surges, visible as streaks downstream. Switching to tightly controlled pelletization methods, as used for 2098P, pays off in lower fines, cleaner hoppers, and fewer resin changeover sweeps.

    Adaptability in New Blends and Products

    With packaging converters developing ever more specialized films, base resin flexibility matters. DOWLEX 2098P blends cleanly with color masterbatch, UV absorbers, slip agents, and antiblock, without losing physical properties or interfering with masterbatch dispersion. For converters tinkering with custom slip or antistatic blends, or running recycled content, this grade offers a strong backbone, absorbing formulation adjustments without going brittle or sticky.

    This adaptability means processors can chase new market trends without the risk of instability. For example, one client introduced a high-barrier multi-layer food pouch, running 2098P as the outer strength layer while switching out inner adhesive tie-layers to lower-cost alternatives. Cycle tests demonstrated no loss in dart impact or heat sealing range, and the finished pouch withstood both refrigerated and ambient handling better than previous recipes.

    Supporting Downstream Sustainability

    More buyers demand proof of sustainability and keep a sharp eye on waste and recyclability. DOWLEX 2098P supports easy identification in waste stream sorting, since it avoids fillers and relies on clear polymer chemistry markers. Processors feeding film scrap into their own material loop have reported stable opacity and little to no fluctuation in tensile strength, even after several trips through the extruder. This makes third-party recycling outcomes—in mechanical recycling environments—more predictable and less prone to downgrading.

    Brand owners increasingly require rigorous statements of compliance—food safety, chemical inertness, tox audit. Our team stays ready to support processors with documentation and ongoing batch-by-batch testing, eliminating end-user headaches if audits occur. Experience has shown that regulatory consistency builds trust throughout the packaging chain, preventing costly recalls and market withdrawals.

    Production Reliability and Upkeep

    With years of hands-on experience, we learned that film failures are rarely just a function of the base ingredients—how the resin is produced, pelletized, and delivered matters just as much. DOWLEX 2098P is produced in stable, monitored runs, meaning maintenance managers notice less frequent cleaning stoppages or unplanned downtime. Our shifts run continual melt flow and density checks, so what is delivered on Monday mirrors what leaves our silos on Friday.

    Customers routinely praise the ease with which this grade flows, from storage silo through pneumatic feed to extruder, even after long transport periods. Hot, humid summer days or sub-freezing winter hauls, the pellets resist caking and flow smoothly. Customers who worked with denser or dustier alternatives ran into bridging or arching problems during high-speed startup, wasting valuable tonnage. Every moment lost on manual clearing is a drag—getting this time back makes the difference over a busy season.

    Low Residual Solvent and Film Safety

    Processors making films for sensitive uses—medical, food wrap, specialty retail—worry about off-odors that migrate from non-volatile residuals. Our process engineers run regular solvent residue testing, catching excess levels before material ships. Routine certification means films extruded from DOWLEX 2098P meet hard-to-achieve odor and taint standards, reassuring demanding buyers who specify unambiguous sensory clean sheets for health-related packaging.

    Low migration and taste neutrality matter for pouch linings and wrap films destined for foods and pharmaceuticals. Batch-to-batch flavor exposure panels check for odor and taint in the finished film. We field few complaints, and even those tend to reflect the addition of masterbatch or a downstream processing artifact, rather than issues inherent to the base polymer.

    Improving Operator Experience

    Beyond mechanical performance, operators appreciate simpler handling. With DOWLEX 2098P, resin moves from bag to hopper to feed throat without excessive static or dust up. Pellets stay free-flowing, feeding evenly, reducing jams and minimizing unplanned line stops. Many processors with high fork-lifted silos have told us that they experience lower pellet attrition loss and less final product contamination, reducing both cost and frustration for the entire shift.

    As packaging lines and demands grow more complex, operators gain more responsibilities and less time for problem-solving. Reliable pellet properties translate directly into safer, more predictable working days. Across varying climates and storage conditions, the resin holds its own, simplifying both the raw feed and final film quality check.

    Future-Proofing Flexible Packaging Production

    Flexible package converters and film extruders want a material that will not be made obsolete by regulatory or technical shifts. DOWLEX 2098P stands ready for new film design and green compliance requirements, supporting a move toward lighter, stronger, and more sustainable packaging. Each role played—core layer, blend partner, or stand-alone film—delivers reliable toughness, clarity, and strength. Our team’s willingness to adapt and refine this grade based on operator feedback helps us stay attuned to both machine and market trends.

    Today’s buyers—food companies, shippers, and converters—demand printed, formed, and sealed packaging that resists breakage from plant to market. The same film must hold up under sub-zero temperatures, endure multi-axis stretching in load wrap, and survive repeated handling before reaching the consumer. DOWLEX 2098P has proven itself in all these roles, letting processors run leaner, faster, and with fewer headaches. As industry standards tighten and end use needs evolve, we continue to refine both process and product, treating every shift’s feedback not as a complaint, but as a guide for continuous improvement on the manufacturing floor.