| HS Code | 849323 |
| Product Name | BYNEL Adhesive Resin (Maleic Anhydride Graft) 46E1052 |
| Chemical Family | Polyolefin, Maleic Anhydride Grafted |
| Appearance | Pellets |
| Color | Natural |
| Density | 0.96 g/cm³ |
| Melt Index | 2.0 g/10 min (190°C/2.16kg) |
| Graft Type | Maleic Anhydride |
| Compatibility | Polyethylenes, Polyamides |
| Typical Use | Tie layer for multilayer films |
| Recommended Processing Temperature | 190-230°C |
| Moisture Content | <0.1% |
| Storage Temperature | Store below 50°C |
| Solubility | Insoluble in water |
| Form | Solid |
As an accredited BYNEL Adhesive Resin (Maleic Anhydride Graft) 46E1052 factory, we enforce strict quality protocols—every batch undergoes rigorous testing to ensure consistent efficacy and safety standards.
| Packing | BYNEL Adhesive Resin 46E1052 is packaged in a 25 kg (55.1 lb) multi-layered paper sack with inner polyethylene lining. |
| Container Loading (20′ FCL) | For BYNEL Adhesive Resin (Maleic Anhydride Graft) 46E1052, a 20′ FCL typically loads about 16-18 metric tons packed in bags. |
| Shipping | BYNEL Adhesive Resin (Maleic Anhydride Graft) 46E1052 is typically shipped in sealed, moisture-resistant packaging such as polyethylene-lined bags or drums to prevent contamination and moisture absorption. Standard shipping practices comply with chemical safety regulations, and material safety data sheets (MSDS) accompany each shipment for proper handling and storage guidance. |
| Storage | BYNEL Adhesive Resin (Maleic Anhydride Graft) 46E1052 should be stored in a cool, dry, and well-ventilated area, away from direct sunlight, heat sources, and moisture. Keep containers tightly closed to prevent contamination. Avoid contact with oxidizing agents and strong acids. Storage temperature should ideally be below 50°C (122°F) to maintain material stability and performance. |
| Shelf Life | BYNEL Adhesive Resin (Maleic Anhydride Graft) 46E1052 typically has a shelf life of 18 months when stored in unopened containers. |
Our BYNEL Adhesive Resin (Maleic Anhydride Graft) 46E1052 serves as an advanced functional coupling agent and compatibilizer, enabling reliable bonding and compatibility for diverse polymer-based manufacturing flows. Below, we highlight verified downstream industrial applications with scenario-specific operational details for professional B2B buyers, processors, and quality control managers.
This resin is widely integrated into the production of multi-layer barrier films for flexible packaging, where high interfacial bonding between polyolefin and polar substrates is imperative. Processors use this material to promote strong tie-layer adhesion, accommodating demanding food and pharma packaging regulatory requirements. By fine-tuning its proportion based on the target laminate structure, manufacturers maximize peel strength while maintaining processability and clarity for sophisticated packaging lines.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
In the manufacture of multi-layer pipes combining polyolefin and aluminum, such as PEX-AL-PEX or PE-AL-PE variants, this adhesive resin provides durable bonding at the polyolefin/aluminum interface. Manufacturers gain improved hydrothermal stability and delamination resistance, ensuring compliance with potable water and floor heating pipeline standards. This function is critical for long service life in pressured fluid transport applications.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
For automotive Tier 1 suppliers producing lightweight, impact-resistant structures, this resin acts as a compatibilizer in polyolefin-based composites filled with glass fibers or polar engineering plastics. Its functional groups enhance chemical coupling, improving interface adhesion under automotive thermal cycling and vibration loads. Manufacturers utilize it to meet OEM mechanical performance targets while supporting productivity in automated injection molding environments.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
This grafted adhesive resin supports production of power and communication cables requiring co-extruded sheathing with enhanced adhesion between polyolefin and polar insulation or barrier layers. Cable manufacturers apply precise dosages to maintain electrical integrity, mechanical protection, and chemical resistance, addressing cable engineering standards for voltage, fire retardance, and durability in harsh environments.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Textile and nonwoven laminators utilize this adhesive resin in hotmelt formulations to achieve persistent bonding of polyolefin layers to polar fibers or coatings (e.g., PET, PA). The resulting adhesive films withstand laundering, UV exposure, and abrasion, supporting technical fabric applications in hygiene, medical, and performance apparel with critical wash and wear durability targets. Additive ratios are determined following textile construction and process thermal profiles.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Profile extruders and boardmakers employ this adhesive resin as a coupling modifier in WPCs combining polyolefin polymers with lignocellulosic fillers. Its grafted chemistry promotes effective stress transfer and water resistance by enhancing compatibility, producing high-strength decking and siding for exterior use. Producers regulate the dosage to balance mechanical performance against extrusion throughput and ease of surface finishing.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Competitive BYNEL Adhesive Resin (Maleic Anhydride Graft) 46E1052 prices that fit your budget—flexible terms and customized quotes for every order.
For samples, pricing, or more information, please contact us at +8615365186327 or mail to sales3@ascent-chem.com.
We will respond to you as soon as possible.
Tel: +8615365186327
Email: sales3@ascent-chem.com
Flexible payment, competitive price, premium service - Inquire now!
As producers working hands-on with specialty resins, we spend a great deal of time perfecting each grade to solve problems that aren’t just theoretical—they’re on the line, in the plant, and often right in front of us. That’s the guiding force behind the development of BYNEL Adhesive Resin 46E1052, a maleic anhydride grafted resin aimed at bridging polymers that resist adhesion. Among countless adhesive resins out there, only a few deliver reliable performance in applications that expect more than just compatibility—they demand a stable, lasting bond in real-world manufacturing conditions.
Our 46E1052 grade has a base of polyethylene, modified with maleic anhydride to give it a tough, tenacious character. The maleic anhydride doesn't just sit on the surface; it reacts with polar groups on films or layers that normally want nothing to do with polyolefins. Users of coextruded films, multi-layer pipes, and even aluminum or EVOH barrier structures have found that the difference with this resin comes from long-term adhesion, without the issues we’ve seen from poor grafting stability in other brands.
Specifically, 46E1052 comes in a free-flowing pellet form. That may sound ordinary, but in practice, pellet consistency translates to less dust, cleaner feeding, and steadier extrusion performance. The melt flow value (usually in mid-range) fits most standard processing lines, striking a balance between flexibility and structure—crucial in applications where the interface between layers calls for toughness without excess rigidity or embrittlement.
Most of the 46E1052 we supply finds its place in multi-layer film structures, especially when users want to laminate incompatible layers like EVOH, PA, or even aluminum foil to polyethylene. The grafting level—our carefully controlled ratio of maleic anhydride—makes the resin suited for so-called “tie layer” work. Some customers are producing food packaging films needing reliable oxygen barriers. Others run pipe extrusion lines where polyolefin layers must anchor to a core polymer for mechanical or barrier reasons.
One thing we’ve learned is the environment on a film line, or even a small lab extruder, is not sterile. Fluctuations in temperature, the demand for high throughput, or even shifts in humidity can push a generic resin to its breaking point. With 46E1052, real-world trials have shown a consistent, clean melt, and adhesion that resists delamination even after heat cycles or stretching in downstream processes. This comes directly from tuning the grafting reaction to avoid too much or too little modification—an overgrafted resin can be brittle and dark, while an undergrafted one won’t stick.
We routinely pit 46E1052 against other maleic anhydride grafted adhesion resins, sometimes in blind shop-floor tests. The biggest difference reported by processors sits with color, odor, and substrate bonding. Resins with higher residual maleic anhydride content tend to give off sharper odors during processing and can yellow at moderate processing temperatures. 46E1052 shows a reduced odor profile, and film color regularly appears more neutral, especially in thicker or multilayer constructions.
Some competitive grades introduce issues like gels or poorly grafted fractions, leading to contamination on delicate film lines or streaks after extended runs. Downtime for filter cleaning or screw pull-outs becomes a cost, not just an inconvenience. Our in-house compounding and degassing steps address these issues up front. The result is a cleaner, more stable resin pellet, which processors regularly report as translating to fewer line interruptions, a smoother melt, and less maintenance intervention on lines using our material.
While there are many grades labeled as “maleic anhydride grafted,” the sourcing, control of side reactions, and purification steps vary greatly between manufacturers. We use real melt flow and bound maleic anhydride titration as control points, ensuring every lot matches a set of process-tested numbers—not just advertised properties.
In multi-layer barrier packaging, the key challenge isn’t just sticking things together—it’s achieving the right level of bond, while also preserving the barrier and mechanical functions of each layer. Over the past decade, many clients have come to us struggling with both visible and microscopic delamination after converting their film into pouches, tubes, or even bottle liners. One recurrent cause: tie layers that don’t maintain adhesion under flex or after exposure to oils and solvents. 46E1052 answers with reliability borne out of direct response to these failures: better controlled maleic anhydride surface density, and a consistent molecular weight distribution that holds up under repeated heat and stress.
In piping or automotive applications, another stumbling block crops up—compatibility between polyolefin structural layers and more polar barrier materials. Attempts to blend generic MAH-grafted resins either ended with phase separation or with tie layers that didn’t survive high-pressure hydro testing. Our answer: controlled reactivity, enough for strong chemical interaction but moderated so as not to embrittle or crack the structure. Our product doesn’t just “let things stick”—it creates an interface that stands up to stress and temperature swings. Many of our long-term partners can rely on the mechanical integrity of the end product for years, not just passing easy tests in the lab.
Operators and line supervisors often reflect on the ease of processing as a deciding factor beyond lab data. We work with feedback loops from the field: is the pellet feed consistent? Does the melt flow hold under the daily operating window, even if the temperatures drift or back pressure rises? These tangible concerns shape how we refine each production batch.
That’s why, at our extrusion lines, we’re regularly running comparative melt flow trials, monitoring color and odor after extrusion, and taking adhesion samples for peel strength—even on a lot-to-lot basis. Our goal: no producer loses a shift or, worse, a customer’s trust because of an unexpected hiccup in tie layer adhesion. We push every lot through multi-day hold tests, not just instant peel. Time under heat and pressure often reveals what quick tests might miss. Those demands, coupled with block resistance in pellet form and storage stability, are the cornerstones of what we consider a reliable adhesive resin.
The push for sustainable packaging and products comes with its own challenges for multi-layer adhesive resins. Customers pursue mono-material packaging for recyclability, yet still require high barrier and mechanical properties. Here, 46E1052 sees use in recyclable PE-based film structures—where the tie layer must not contaminate recycling streams or hamper reprocessing. Over the last several years, we’ve worked to reduce extractables, lower volatiles, and optimize reactivity so that material reclaim stays feasible and regulatory limits are respected.
The trend toward renewable-sourced polymers also puts pressure on performance—all biodegradable or bio-based layers are not naturally compatible with polyolefins. We continue to test 46E1052 in novel structures, including adhesives used in blends with renewable polymers, ever mindful of the fact that a good tie layer keeps integrity without hampering recyclability or end-of-life processing.
One learnable from years of production is that batch-to-batch traceability helps not only with troubleshooting, but also with guaranteeing a uniform product in diverse global markets. For 46E1052, our quality control logs maintain comprehensive records for resin base origin, grafting levels, melt flow, color, and residual monomer. This rigorous approach lets us answer tough questions directly—such as: “Why did an adhesion reading drop in a customer’s January shipment versus the previous December lot?” We track it to every parameter and can provide direct feedback—not vague explanations or excuses about feedstock variability.
Resin buyers and converters know that traceability can be the difference between making a high-performance package and losing an important customer. With every ton of 46E1052, we work to eliminate the risk of a bad batch slipping through a packaging operation, having direct manufacturing control from base resin to final pellet ensures that we can back our claims with data and operational know-how, not just datasheet promises.
Adhesive resins look perfect on paper, but most field failures never start in the laboratory. In real operations, line speeds run higher, raw material mixes contain trace contaminants, or a small change in process temperature magnifies itself over a run. 46E1052 comes out of decades of responding quickly to field reports, modifying everything from pellet geometry to additive packages if any trouble surfaces. We routinely provide onsite or virtual technical support, not stopping at just recommending a grade but troubleshooting film haze, neck-in, or adhesion loss on the ground. That direct engagement with users means our resin evolves to answer actual, not hypothetical, production challenges.
Sometimes, converters experimenting with new barrier layers ask about resin compatibility or long-term bonding after high sterilization or solvent exposure. We make sure to keep our samples available for rapid prototyping, with technical support grounded in actual plant feedback, not just datasheets or broad claims. Whether it’s adhesive performance in dairy pouch films or robust adhesion in spiral-wound pipe, our approach stays practical, and every formulation change links back to customer experience and factory results.
People on shop floors rarely ask for jargon or marketing claims—they want material that processes with predictable results and delivers consistent output shift after shift. Over years of manufacturing BYNEL Adhesive Resin 46E1052, we’ve tailored every process step, from raw material selection through to packaging, to guarantee that users get reliable runnability, and the end-use performance they’ve come to trust.
By focusing on hands-on results—whether that’s achieving high peel adhesion in a coextruded film, or controlling gel formation in a pipe extrusion line—the differences in our adhesive resin go far deeper than a product code or datasheet entry. Our customers don’t just buy a product; they buy the cumulative experience of a manufacturer who’s present when problems arise, who can identify a real-world cause for an end-use failure and deliver a solution that keeps their business moving.
The landscape for packaging and industrial adhesives keeps changing, and we see firsthand the challenges customers face meeting new regulatory standards, higher consumer expectations, and ambitious recycling targets. We invest directly in testing 46E1052 under emerging processing conditions—higher throughputs, tighter barrier demands, or new substrate introductions—so our products hold up under tomorrow’s scrutiny, not just today’s.
Our work never relies solely on batch consistency; it requires a willingness to refine our understanding of how adhesive resins function across every manufacturing tier. As environmental expectations rise, our specialty is honest, responsive support backed by solid data. From lab through to 24-hour production lines, our commitment is to manufacture adhesive resins like 46E1052 that deliver more than just a chemical fix—they enable longstanding partnerships with customers who push the limits of what modern materials can achieve.
Feedback from real manufacturing floors shapes our ongoing work with BYNEL Adhesive Resin 46E1052. Every report, whether praise or concern, drives us to focus improvements not just on product properties, but on the service, documentation, and support that surround each shipment. We adjust processes based on hurdles faced in plant operations, giving us the agility to keep our product competitive and directly relevant.
Because we work in direct communication with converters, packagers, and technical staff, knowledge transfer happens instantly. Suggestions or requirements shared by customers become the seed for our next round of improvements. Our R&D personnel often spend days in customer plants, gathering real-world insight to inform every batch and supporting deeper technical collaborations across the industry.
As direct producers of BYNEL Adhesive Resin (Maleic Anhydride Graft) 46E1052, we bring decades of hands-on expertise to every batch. From feedstock sourcing through fine-tuned grafting control, to finished pellet QC, every step is designed to manage risks and ensure production up-time. We don’t view adhesive resins as commodity materials, and we refuse to accept solutions that only work once or under perfect lab conditions. Our real advantage comes from solving persistent issues—those nagging lamination failures, delamination scares, or running variances—through the creation of a user-focused and finely controlled product.
The real test for any adhesive resin is what happens during unpredictable runs, over months and years of use, not simply the first meter off the line. BYNEL Adhesive Resin 46E1052 delivers both immediate processing ease and the kind of robust, stress-resistant adhesion that supports a durable finished product in countless critical applications. Our role as manufacturer runs deeper than production and delivery—it’s about building lasting trust with partners who expect more from the chemistry they use every day.