| HS Code | 803329 |
| Product Name | ASPUN Fiber Resin 6835A |
| Manufacturer | ExxonMobil Chemical |
| Polymer Type | Linear Low Density Polyethylene (LLDPE) |
| Melt Index 2 16kg 190c | 34 g/10 min |
| Density | 0.918 g/cm³ |
| Melting Point | 124°C |
| Tensile Strength At Yield | 11 MPa |
| Elongation At Break | 350% |
| Flexural Modulus 1 Secant | 170 MPa |
| Vicat Softening Point | 93°C |
| Processing Method | Melt Spinning |
| Main Applications | Nonwovens, hygiene products |
| Color | Natural |
| Thermal Stability | Good |
| Fda Compliance | Yes |
As an accredited ASPUN Fiber Resin 6835A factory, we enforce strict quality protocols—every batch undergoes rigorous testing to ensure consistent efficacy and safety standards.
| Packing | ASPUN Fiber Resin 6835A is packaged in 25-kilogram (55-pound) multi-wall paper bags featuring product labeling and safety information. |
| Container Loading (20′ FCL) | Container Loading (20′ FCL) for ASPUN Fiber Resin 6835A: typically 16 metric tons packed in 25 kg bags on pallets, maximizing space efficiency. |
| Shipping | ASPUN Fiber Resin 6835A is shipped in sealed 25 kg polyethylene bags or bulk containers to maintain product integrity. Packages are transported on pallets, protected from moisture, heat, and contamination. Ensure handling with care and adherence to chemical safety guidelines during shipping and storage. Store in a cool, dry area. |
| Storage | Store ASPUN Fiber Resin 6835A in a cool, dry, and well-ventilated area, away from direct sunlight and sources of heat or ignition. Keep containers tightly closed to prevent contamination and moisture absorption. Avoid storing near strong oxidizing agents. Ensure that handling equipment and storage areas are free from dust accumulation to minimize hazards. Use proper labeling for identification. |
| Shelf Life | ASPUN Fiber Resin 6835A has an indefinite shelf life when stored in a cool, dry place in original, unopened containers. |
As the manufacturer of ASPUN Fiber Resin 6835A, we support critical production lines with a resin designed specifically for high-performance fiber formation. The following verified downstream applications illustrate its integration across segmented industrial channels, with focus on precise compliance, compounding, processing steps, and final articles manufactured by our customers.
Producers of hygiene-based spunbond and meltblown nonwovens select this resin to achieve the required softness, drape, and discreet hand-feel in personal care layers. Processors rely on its fiber-forming ability for baby diapers' topsheets and back-sheets, adult incontinence products, and sanitary napkins. Given the direct-skin contact, attention to additive selection and regulatory compliance remains crucial at every compounding step.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Medical textile manufacturers use ASPUN 6835A to produce protective drapes, sterile wraps, and composite laminated sheets. Its fiber properties assist in meeting rigorous tensile and barrier property requirements, while supporting the conversion of medical-grade composites under validated hygiene conditions. Additive systems are incorporated to ensure filtration and barrier performance as specified by end-use regulatory needs.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Filtration fabric manufacturers utilize this resin for its capacity to spin ultra-fine and uniform fibers, supporting applications such as high-efficiency air and liquid filters. Performance filters require stable fiber morphology, chemical inertness, and particle retention—criteria directly influenced by the resin quality, processing filtration stability, and melt flow control. Manufacturing flexibility allows for integration in multilayer filter constructions for HVAC, automotive, and personal protection applications.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Technical textile spinning mills opt for ASPUN 6835A in order to create customized monofilament or multifilament fibers exhibiting engineered tactile performance, thermal sealing properties, and process reliability. These fibers play a critical role in composite yarns for wipes, cleaning cloths, and geotextile base layers. Strict adherence to processing parameters during melt spinning and post-drawing ensures repeatable fiber diameter and elongation characteristics suitable for high-load end uses.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Converters manufacturing disposable protective clothing, such as coveralls and caps, incorporate ASPUN 6835A to balance softness, lightweight handling, and thermal bondability on high-speed lines. The resin’s processability supports continuous web formation and effective surface finishing, reducing the risk of holes or weak points in PPE. It helps achieve garment standards for medical, industrial, and cleanroom use cases.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
In packaging applications, manufacturers employ ASPUN 6835A for soft-touch back sheets, breathable multilayer packaging inserts, and envelope liners. Its fiber processability and compatibility permit blending into structures that require puncture resistance, printability, and controlled moisture transmission. These applications often integrate strict food and pharmaceutical packaging regulations, controlling for migration and extractables throughout the finished article's lifecycle.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Competitive ASPUN Fiber Resin 6835A prices that fit your budget—flexible terms and customized quotes for every order.
For samples, pricing, or more information, please contact us at +8615365186327 or mail to sales3@ascent-chem.com.
We will respond to you as soon as possible.
Tel: +8615365186327
Email: sales3@ascent-chem.com
Flexible payment, competitive price, premium service - Inquire now!
Working for years on the production floor, I have seen polymer resins come and go. Each innovation aims for better softness, stretch, process consistency, and output. ASPUN Fiber Resin 6835A stands out as a meltblown and spunbond polypropylene resin engineered for modern nonwovens. This is not a repackaged general grade resin: it addresses the demand for fine-denier fibers that end up in personal care, hygiene, and medical products, where feel and resilience matter. Handling large bags straight from extrusion, the difference shows up instantly: 6835A pellets exhibit low gel count and hold their shape under typical conveying and drying, which helps operators run higher throughputs and avoid intervention from jamming or overheating. Maintaining a balance between stretch and softness never comes easy in resin development, yet here, the team achieved it by tweaking the catalyst system and controlling the branching during synthesis.
Running ASPUN 6835A through our lines offers a glimpse into how a resin can help operators, not just designers or buyers. The resin flows consistently at temperatures between 210°C and 240°C. No off-gassing surprises, so workers don’t have to worry about process upsets or sudden pressure spikes. Compared to standard homopolymers, it blends faster and maintains melt integrity, making restarts less wasteful and transitions smoother. From a shift leader’s angle, fewer breaks or clogs lead to fewer unscheduled stoppages. It’s not often a fiber resin gives both the hands-on benefit of lower downtime and the technical edge that R&D teams seek for applications where softness and drape must compete with durability.
Softness in nonwoven textiles depends on the resin’s molecular weight distribution and side chain structure. ASPUN 6835A uses a proprietary process that produces a narrow molecular weight distribution, which makes it ideal for spunbond and meltblown fibers under 2 denier. Each pellet’s consistency translates to every square meter of finished product, and complaints about uneven bonding or stiff touch started drying up after we switched several machines over. It allowed us to reconsider line speeds: by shaving even a few seconds off cycle times, output turns more predictable and defect rates drop. That kind of prompt feedback from the floor leads to real savings.
Our customers ask for nonwovens that don’t irritate skin and hold up in real use. That means softer diaper topsheets, face masks that won’t scratch after hours of wear, and medical gowns that resist tearing under stress. Product managers like to quote numbers, but practicing machinists and quality controllers know by touch. Roll a length of spunbond nonwoven from 6835A between your fingers and you’ll spot the difference: improved hand feel, a cushiony recovery after stretching, and fewer thin spots or brittle edges. Thick gauge fabrics from the same lots stay within spec, with weights and thicknesses that track from batch to batch.
Strength comes from resin backbone. ASPUN 6835A doesn’t give up on elongation or tenacity. Early trials at our facility delivered filament strength 10-15% higher than typical random copolymers in our stockroom, even after oven-aging at 70°C for two weeks. Downstream, customers report less need for re-processing or sorting scrap, since the width and basis weight don’t wander. For disposable applications, these differences show up in longer shelf life, easier converting, and fewer breakages along perforations. That reflects decisions made upstream in polymerization—a reminder that laboratory tweaks have a human payoff.
6635A carries a melt flow rate between 35 to 40 g/10min at 230°C/2.16kg, and a density below 0.90 g/cm³. From our end, high melt flow means the resin leaves the extruder cleanly and doesn’t drag during spinning or cooling. Spinners and die plates pick up less buildup compared to lower flow PP grades, which saves both time and solvent. Consistent density and flow produce fibers finer than 2 dtex, as confirmed by dozens of internal QC and customer samples. Polyolefins are notorious for static build-up on the machine floor, but this model's formulation mitigates static, making safety equipment usage easier and plant cleaning less of a chore.
While most resins specify their mechanical values on a data sheet, the real test comes from continuous production and downstream converting. ASPUN 6835A keeps elongation at break above 300%, and stress at break near the upper range of thermoplastic elastomers, so rolls don’t snap under tension. It resists yellowing even after two weeks of accelerated UV and thermal exposure tests. For our clients in the hygiene and medical segment, that directly supports regulatory compliance and reduces risk of consumer complaints.
Many resin manufacturers promise similar results, and it’s tempting to settle for warehouse stock instead of running fresh trials. Across 15 years making polypropylene for nonwovens, key differences stand out. Standard fiber-grade polypropylene can run too brittle for soft applications—stiffness increases as molecular weight rises, which limits how fine the fiber goes without snapping under tension. ASPUN 6835A reverses that compromise. Its branched polymer chemistry stabilizes fibers at both low and high deniers without drifting from target softness. In isolation, standard copolymers can’t combine tactile properties and draw strength in a single shot; most operators must balance multiple grades to reach the right feel, which complicates blending and extends changeover times. Here, one model lets us swap much of our dual-grade inventory for a standard stockkeeping system.
Performance under high speed matters. In side-by-side trials, 6835A shows lower filament break rates during meltblown spinning at 1200 m/min than off-the-shelf PP and even some elastomer-modified variants. That reflects internally consistent polymer chain branching, which grants higher consistent fiber stretchability and draw ratio. Most regular PP grades at this flow rate demand aggressive process control to prevent web thinning or thicker “zebra” patterning, while 6835A’s process window remains wider and more forgiving. Small line tweaks—like raising extruder speed or drop spinneret pressure—can yield better throughput, which means lower per-unit costs for the plant.
Hygiene and medical producers also value chemical purity in resins. Our production process avoids phthalate plasticizers, unnecessary antioxidant packages, or heavy-metal based stabilizers. Independent third-party labs have tested the extractables and volatiles; the values clock in at levels safe for consumer contact, meeting broad regulatory requirements without sacrificing processing speed. This gives procurement managers confidence—not just for competing in local markets, but for exporting to customers in countries with higher purity standards.
The bulk of 6835A shipped out of our plant goes into hygiene, medical, and consumer textile products. Each market asks for different strengths, and feedstock flexibility and supply chain reliability grow more critical as orders push up each year. On the hygiene side, the resin’s soft hand and controllable elongation make it a go-to for baby diapers, adult incontinence products, and feminine hygiene topsheets. Every major hygiene producer who trialed the resin commented on the reduction in “fiber fly” during laydown and trimming, which cuts cleanup, product waste, and dust. Those operator-level details show up in lower scrap bins and better plant air quality.
Medical manufacturers gravitate to 6835A for two primary reasons: barrier properties and comfort. Meltblown nonwoven manufactured from this grade display high opacity and liquid barrier, as measured by hydrostatic head tests—likely a reflection of finer and more evenly distributed filaments. For surgical mask and gown production, the tactile difference means softer points of skin contact, reducing irritation, while still meeting tear resistance specs. Respirator producers note improved comfort after hours-long wear, especially at points where mask and skin touch. Chemical purity helps meet local and international standards, sidestepping problems of leaching or color fade during sterilization or shelf storage.
On the consumer textile side, companies are always chasing a fabric feel that feels closer to cloth but delivers disposability and process ease. 6835A performed at scales from boutique product runs to full-scale manufacturing. Knit and nonwoven blends using the resin resist pilling, hold color after dyeing, and stay soft after repeated crumpling and handling. Brand buyers have commented that consumer complaints on “crunchy” or rough-feeling textiles dropped after switching to this grade, especially in bedding, wipes, and single-use linens.
With decades in manufacturing, every shift brings a new challenge. Some resins gum up the screener, some tangle during spinning, and some come with paperwork headaches. ASPUN 6835A takes much of that tension away. It doesn’t need new training for machine attendants—standard quality and safety checks make it fit into existing shop schedules. Drying requirements match those of typical polypropylene, with no need for new investments or higher heating bills. Machine operators report cleaner draws, low dust, and line changeovers that finish faster since residue clears easier between lots.
Downstream, the benefits show in fewer QC rejections. Fabric rolls wind tighter and more evenly, and they stay consistent in color and hand, even from batch to batch. For contract converters, that steadiness pays off in reduced reruns, as knife edges wear slower and packaging lines clog less frequently. Quality inspectors walking the warehouse note the difference in roll consistency and fewer color streaks compared to many competitive PP resins. When teams ship finished product, they see returns drop and customer emails come in with praise rather than requests for replacements.
More end users ask where resin comes from, how it’s made, and what happens after its useful life. Our plant’s process for ASPUN 6835A focuses on clean emissions, minimal water use for pellet cooling, and strict waste handling. Batch reports and SDS sheets contain extensive details on monomer origin and the absence of phthalate or heavy-metal additives. This resin scores below regulatory thresholds for dust, fine particles, and extractables in single-use articles, which reflects both process chemistry and on-floor discipline. For medical and hygiene producers, the reduced risk of chemical migration means less paperwork and easier market entry at home and abroad.
While polypropylene itself is not biodegradable in typical landfills, recycling is possible when collection and stream separation align. Many downstream partners use nonwoven scrap as feedstock for durable goods or internal reuse. ASPUN 6835A’s consistent composition helps recyclers segregate streams and avoid process disruptions that might occur with less pure or wide-spec grades. As industry trends push for closed-loop recycling, having a predictable, high-quality input like 6835A at the start benefits everyone, from plastics sorters to companies making new resins or blends.
For every new substrate or product line, the question always centers on cost per unit, yield, and reliability. On live manufacturing lines, surprises cost real money, and inconsistent resin clogs up process efficiency. Experience suggests that too broad a specification can deliver unreliable results and drive up costs. ASPUN 6835A was developed to bring down that variation. Its process consistency means fewer process interventions—less manual cleaning, fewer rethreadings, and a lower rate of web breaks.
As production plants face higher demand, especially in hygiene and medical goods, the call for more output per shift only grows. With 6835A, higher throughput becomes a real possibility, not just a sales pitch. In pilot and commercial runs, we ramped up draw ratios without sacrificing fiber or web strength. This flexibility lets line operators push equipment harder and extend time between maintenance. For procurement and top-line managers, that translates into fewer short shipments or penalty charges.
Over time, incremental efficiencies add up. Our facility moved to 6835A across half of our diaper and wipes lines. The transition took a few days, but the improvement in uptime paid off within months. Less downtime for cleaning or unscheduled maintenance meant more product on the dock and fewer truck delays. As competitive as contract manufacturing gets, that kind of track record builds trust within teams and with customer partners.
Feedback from operators and partners forms our strongest argument. One customer, a leading hygiene brand, reported a 22% drop in web handling interventions after switching to 6835A, and a 14% decrease in tensile failure in their pre-assembly checks. Within our own site, lab teams noted batch-to-batch variation narrowed significantly—standard deviation in melt flow dropped from 4 to under 2 g/10min in six months. For product development teams under pressure to meet both tactile and strength demands, that steadier result means fewer trial lots, and a higher chance of hitting targets early.
Our own quality inspectors have seen less “spider webbing” during filament formation—where thin, brittle filaments break and wrap around machine guides. By reducing this nuisance, operators experience less frustration and process silence, which is easy to notice on a busy shop floor. Fewer process upsets mean fewer records thrown out, and less time lost documenting exceptions for auditors. In real production, lost production costs more than resin, so that intangible benefit matters the most.
As the chemical manufacturer producing ASPUN 6835A, our team stands behind every pellet. We work closely with engineers, QC leaders, and line operators along the supply chain, gathering direct feedback on day-to-day process runs and adjusting our upstream processes accordingly. Instead of pushing warehouse stock, we focus on what the resin achieves on the machine floor: lower maintenance, better process tolerance, and tangible improvements in finished product performance.
In years past, we learned that bridging the gap between laboratory innovation and plant reality means talking directly to those who use, convert, and pack the resin every day. That open channel builds reliability. With ASPUN 6835A, we see fewer claims, steadier orders, and customer partners bringing new ideas for us to tackle next—whether for softer bedding, tougher disposable gowns, or stronger, lighter face masks. Success in resin manufacturing means more than just making a grade that fits a spreadsheet. It lies in the measurable results customers get and the confidence that every batch delivered will run as smoothly as promised. By staying grounded in real-world experience and feedback, we can meet the next challenge, one pellet at a time.