| HS Code | 863686 |
| Product Name | ELASTENE Acrylic Emulsion 3762 |
| Chemical Type | Acrylic Emulsion |
| Appearance | Milky white liquid |
| Solids Content | Approximately 50% |
| Ph | 7.0 - 9.0 |
| Ionic Character | Anionic |
| Viscosity | 100 - 800 cP (Brookfield, 25°C) |
| Density | 1.03 g/cm³ |
| Film Forming Temperature | Below 0°C (MFFT) |
| Storage Temperature | 5°C - 40°C |
| Stability | Good mechanical and freeze-thaw stability |
| Odor | Mild |
| Application | Elastomeric waterproofing and coating systems |
| Water Resistance | Excellent after film formation |
As an accredited ELASTENE Acrylic Emulsion 3762 factory, we enforce strict quality protocols—every batch undergoes rigorous testing to ensure consistent efficacy and safety standards.
| Packing | ELASTENE Acrylic Emulsion 3762 is packaged in a sturdy 20 kg white plastic pail with a secure, resealable lid. |
| Container Loading (20′ FCL) | Container Loading (20′ FCL) for ELASTENE Acrylic Emulsion 3762: 16.8 metric tons, packed in 120 kg HDPE drums, 140 drums/container. |
| Shipping | ELASTENE Acrylic Emulsion 3762 is shipped in sealed, 200 kg HDPE drums or 1000 kg IBC totes to prevent contamination and ensure product integrity. Containers are securely palletized and labeled according to GHS regulations. Store and transport under cool, dry conditions, protected from direct sunlight and extreme temperatures. |
| Storage | **ELASTENE Acrylic Emulsion 3762** should be stored in tightly closed, original containers at temperatures between 5°C and 35°C, away from direct sunlight, frost, heat sources, and ignition sources. Store in a well-ventilated, dry area to prevent contamination and degradation. Avoid prolonged storage and use within the recommended shelf life for optimal performance and stability. |
| Shelf Life | ELASTENE Acrylic Emulsion 3762 has a shelf life of 12 months from manufacture if stored in unopened, original containers. |
ELASTENE Acrylic Emulsion 3762 plays a critical role in several high-performance industrial sectors that require advanced polymer chemistry, stringent process control, and finished goods with specialized specifications. As the original manufacturer of this emulsion, we support downstream partners by providing precise technical integration guidelines and regulatory documentation tailored to each major use case.
Leading architectural coatings producers rely on Acrylic Emulsion 3762 to formulate interior and exterior paints designed for long-term weatherability, color retention, and low-VOC emissions. The polymer’s fine particle size and stable dispersion enable high pigment loading, controlled gloss levels, and rapid setting during the paint manufacturing process. These properties address the demand for durable, regulatory-compliant surface finishes in both residential and commercial construction projects.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Chemical formulators in the building protection sector incorporate this acrylic emulsion into liquid-applied and sheet waterproofing systems. The polymer delivers superior elongation and crack-bridging properties, enabling membranes to withstand thermal expansion and dynamic substrate movement. The resulting waterproofing compounds maintain flexibility and adhesion in high-moisture or below-grade environments, such as basements and roofing assemblies.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Manufacturers of pressure-sensitive adhesives value the emulsion for its ability to achieve consistent tack, peel strength, and cohesive film properties on a range of substrates. It supports the formulation of waterborne acrylic adhesives used for permanent and removable labels, packaging tapes, and masking applications, all while maintaining clarity and UV resistance. Industrial converters utilize the emulsion to streamline coating and drying sequences, maximizing line efficiency.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Producers of hygiene, filtration, and automotive nonwovens utilize the acrylic emulsion to improve tensile strength, abrasion resistance, and handle of airlaid and spunbond webs. The polymer’s fine particle structure allows for even fiber coating while maintaining breathability. Downstream partners benefit from enhanced product durability and stability during high-speed thermal or chemical curing.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Converters in flexible packaging trust the emulsion as a film former in water-based ink vehicles and overprint varnishes where adhesion to treated polyolefins, abrasion resistance, and gloss development are critical. The emulsion disperses colorants uniformly and supports high-speed press performance, enabling production of food-contact compliant, visually striking flexible packs for print converters supplying the food, cosmetic, and personal care sectors.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Epoxy and polymer-modified cementitious floor coating manufacturers use the emulsion as an adhesion-promoting and toughening agent for waterborne primer and topcoat layers. Its inclusion improves substrate wetting, provides impact and abrasion resistance, and extends lifecycles of flooring systems subject to heavy mechanical loads and frequent cleaning, such as warehouses, production shops, and parking structures.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Competitive ELASTENE Acrylic Emulsion 3762 prices that fit your budget—flexible terms and customized quotes for every order.
For samples, pricing, or more information, please contact us at +8615365186327 or mail to sales3@ascent-chem.com.
We will respond to you as soon as possible.
Tel: +8615365186327
Email: sales3@ascent-chem.com
Flexible payment, competitive price, premium service - Inquire now!
Working at a chemical plant, the day starts early and it ends when the job is done. We see how raw emulsions can affect not just the factory floor, but paint shops, construction projects, waterproofing crews, and larger infrastructure too. Over the years, our teams have fielded questions from all ends of production lines and application fields. Many firms look for acrylic emulsions that handle harsh weather, give excellent adhesion, and are simple to work with—even for pretty rough jobsites. We brought together direct feedback from these conversations to design ELASTENE Acrylic Emulsion 3762.
ELASTENE Acrylic Emulsion 3762 steps up where water resistance, flexibility, and easy workability count. It uses a pure acrylic backbone—no shortcuts with blended copolymers or fillers—to deliver tough film strength after curing and deep clarity in finished coatings. The particle size here is controlled tightly, which helps products based on 3762 roll out smoothly onto a wide range of substrates from fresh concrete to aged fiber cement board.
Consistency in production matters. What leaves our reactors is scrutinized batch by batch, because we know someone on the other end will roll, spray, or brush this emulsion onto a building that matters to their customers. Downstream users demand reliability, so we maintain a stable viscosity (approx. 500-1500 mPa·s as measured by Brookfield) and solid content hovering near 48%. Good pH stability between 7.5 and 8.5 helps in blending or pigment dispersion, so the final paint or coating doesn’t flake, peel, or yellow under UV. There’s a direct link between how we control those variables at the reactor and how well your elastomeric membrane or topcoat stands up to the environment.
We’ve seen a lot of products labeled as “acrylic emulsions” sold at lower prices, but the difference comes out in the field. Blends and off-brand flex emulsions tend to crack or chalk within a few seasons of harsh sun or rain. ELASTENE 3762 holds up where cheaper resins can’t because we keep tight standards on glass transition temperature (Tg near -7°C). This gives the dried film an elasticity few latex-based products can handle—expanding and contracting with surfaces through hot, dry spells or freezing winters.
With longstanding customers in roofing and waterproofing, we have tracked real project results over five, even ten-plus years. Coatings based on 3762 do not show tackiness or chalking. Buildings don’t need constant recoating, even in tropical rainstorms or on rooftops facing snow-melt cycles. Waterproofing films resist pooling water, and vertical wall paints bounce back after wind-driven rain. Contractors tell us time spent remediating failures has dropped since switching from generic binders to 3762-based formulations.
We learn the most from returned drums, field samples, and failure reports our clients send back for lab review. One of the top corrections we made over the years was to boost early water resistance—weeks after application, not just months. Many acrylics fail “early rain resistance” tests if there’s an unexpected shower within 48 hours. By adjusting our surfactant package and refining the recipe, we cut water sensitivity dramatically. On coastal builds, or during monsoon painting windows, this means fewer callbacks and reworks.
Our engineers test for alkali resistance too. Cement render, mortar, and brick walls hold residual lime and salt, and many lower-end acrylics break down within months. Formulations based on 3762 resist efflorescence and alkali fading long after outdoor walls have dried. We made this improvement not in a marketing office, but in the lab, after requests from construction partners who saw their waterproofing beds soften over time.
If our acrylic falls short, it costs real money and time. Contractors dislike recoating weathered surfaces. Plant maintenance teams want fewer shutdowns. From our end, improving workability, pump-friendliness, and storage stability is key. We run side-by-side tests in technical services—sending sample buckets down the line in actual batch plants, not just clean pilot labs.
Customers apply 3762 with airless spray, roller, or brush. Complaints about tip clogging, split films, and runny coats led to new lab protocols where we pushed the resin into higher pigment loading, adding anti-foaming agents and better thickeners. The goal: coating can go on thick, cover well, dry smooth—without the “orange peel” finish that plagues many generic emulsions in high-humidity or low-temperature environments.
Shelf life matters. Smaller contractors may keep buckets for weeks mid-job; larger production shops cycle through multi-ton lots but still want minimal paint waste. Improvements to 3762’s microbial barrier, achieved by controlled biocide addition, keep the emulsion mold- and mildew-free in the can. These tweaks stem from working closely with both small and large volume users, not from desk-bound speculation.
Few things test a paint film harder than UV, humidity swings, and freeze-thaw cycles. Emulsion toughness isn’t just about numbers on a sheet; we trust outdoor test panels. Panels coated with 3762-based paints and membranes head out to exposed racks—our own, and those of long-term clients. Every time a batch fails, the data comes back to adjust recipes or process controls.
What stands out is that 3762 maintains gloss and whiteness, even on south-facing walls and rooftops. Where cheaper alternatives fade yellow or turn chalky, our formula holds steady. Customers in arid climates like western China, the Middle East, and North Africa praise retention of color, while users dealing with cold, wet weather see fewer “alligator cracks” across membranes and facade paints.
These attributes reflect in maintenance schedules. Public buildings, schools, and high-traffic retail spaces using 3762-based coatings show fewer failures in annual building maintenance checks. Facility managers often remark on fewer emergency repairs and easier standard cleaning, a result not of theoretical performance, but of years of tracking real-world deployment.
Many “premium” resins chase additive fads or high-cost cosmetic gains. In the plant, we know fancy doesn’t always mean better. ELASTENE 3762’s backbone comes from a deliberately clean monomer selection. We opt for minimal residual volatile organics (VOC), so finished goods register below the 50 g/L VOC targets now enforced in stricter jurisdictions. Contractors and manufacturers avoid odorous site conditions, while waste air streams from application reach compliance more easily.
No product gets out our door unless it passes rigorous freeze-thaw cycles and heat acceleration tests. Realistically, drums and buckets will pass through unheated sheds, shipping containers, or be left in direct sunlight. We tweak each lot to balance high solids—avoiding excessive thickening that could jam pumps or incur dilution on site. Routine checks ensure the emulsion won’t separate or clump under stress.
We make 3762 to flex across paints, waterproofing, textured coatings, and flexible adhesive systems. Unlike “one-size-fits-all” copolymer dispersions, 3762 stays consistent in high-build elastomeric roof coatings and in thinner facade paints for large real estate builds. It supports pigment additions without flooding, and stands up well in thick-bed waterproofing layers—often up to 1mm film in a single spray, which balconies, flat rooftops, and pools demand.
In the DIY sector, we find users value simple mixing and minimal odor. Small-volume contractors tell us our emulsion blends smoothly, without gelling up like low-cost imports. Decorative paint users like ease of tinting and even brushing—brushing without skips or roller drag. Water-based adhesives made from 3762 avoid the “sticky” skin formation issue seen in less robust recipes.
We ship ELASTENE products to diverse regions—each with its own standards and climate hazards. 3762 has helped local partners certify their paints to European EN 1062, US ASTM D6083/D7793, and Australia’s AS 4548 waterproofing standards after small tweaks in pigment/filler ratios. Some regions need more fire resistance or higher alkali tolerance; others want super-smooth decorative finishes. Our in-house pilot lines simulate these application environments. This allows local mills, national distributors, and big paint brands to develop regionally compliant, high-performance lines quickly, reducing the trial-and-error most labs face with imported generic emulsions.
Local builders often comment on the repeatability they get from ELASTENE 3762: each drum ships with the same grindability, gloss, and spray response as the last. To us, that consistency shows the value in managing every step—from acrylic polymerization to in-plant blending and barrel filling. Our technical support operates from the same production site, allowing for fast troubleshooting and recipe adjustment.
We’ve encountered growing pressure to produce lower-impact materials amid changing regulation and green building certifications. In our plant, this means strict solvent use controls, recovering process water, and using closed systems to capture VOCs at the reaction stage. 3762’s low odor and low environmental hazard ratings—validated by independent labs—reflect over a decade’s tweaking to avoid problematic ingredients. This includes elimination of APEO surfactants and reduction of formaldehyde donors.
On-site, paints and membranes based on our acrylic replace older solvent-based elastomers, which means crews, neighbors, and building users see less disruption and odor complaints. Cleanup is quick and safe—plain water wipes up the product before full cure. Many clients now leverage 3762 in coatings for schools, hospitals, and other sensitive environments where traditional film-formers cannot meet building safety scores.
Feedback from the field never stops. In hot climates, temperature swings in application rooms sometimes left blisters or microbubbles in films. We worked new wetting agents and antifoams into 3762, cutting bubbles seen on automotive assembly lines and improving roof membrane smoothness. Facade painters disliked the “sticky drag” and difficult rework with lower-end acrylics, so we reformulated the flow agent suite to boost open time by 30%. Now, paints go further per liter and touch-ups lose the “lap marks” that downgrade curb appeal.
Some contractors called in about issues with poor adhesion on aged substrates, especially on rural repair jobs. Repeated re-coats with lower-cost blend resins wasted labor and material. For our product, adhesion testing involved sandblasted, chalked, and weathered surfaces, even lightly contaminated by dust. Outcomes showed 3762 sticks and cross-links fast—even without fancy primers—cutting labor and reducing touch-up.
Each drum reflects repeat lessons from factory production teams, QC inspectors, shipping managers, and tech service crews. Everyone’s seen what happens with poorly produced emulsions—gelling, separation, or uneven performance on hot-cold cycles lead straight to dissatisfied users. We keep strong links with applicators and plant users, holding regular post-job reviews in customer facilities rather than in tidy office suites. These collaborations have improved our wet chemist skillsets and built up know-how in plant troubleshooting and adjustability.
We keep hearing from both urban and remote clients that using a product grounded in practical manufacturing reality saves expensive repeat visits and keeps site timelines predictable. Many clients have sent back notes sharing photos, performance logs, and even weather data from their own jobsites—the sort of field information that can’t be captured in a standard data sheet but reflects the impact of careful, consistent chemistry.
ELASTENE Acrylic Emulsion 3762 has grown from continuous feedback, field failures, and iterative improvement from folks at every level of the materials chain. In our own factories, recipe tweaks are driven by hard-won observations, not just by top-down design mandates. What sets this emulsion apart is not advertising—it's on-the-ground performance, proven across the globe, shaped by voices of applicators, contractors, and end users who stake their own reputations and livelihoods on the products they apply.
We’re proud to make 3762 because we see—on spreadsheets, inspection reports, and real-world buildings—the long-term durability, flexibility, and reliability it brings to jobs of every scale. Our entire approach comes down to making sure whatever batch ships next is as strong, stable, and usable as the last, so your team spends less time fixing problems and more time planning for what’s next.