| HS Code | 195798 |
| Product Name | ELASTENE Acrylic Emulsion 300 |
| Type | Acrylic Polymer Emulsion |
| Appearance | Milky white liquid |
| Solids Content | Approximately 50% |
| Ph Value | 7.5 - 8.5 |
| Viscosity | 100 - 500 cps (Brookfield RVT, #2/20 rpm/25°C) |
| Ionic Nature | Anionic |
| Film Appearance | Clear, flexible |
| Minimum Film Forming Temperature | Below 0°C |
| Water Resistance | Excellent |
| Stability | Good mechanical and freeze-thaw stability |
| Compatibility | Compatible with most fillers and pigments |
| Application | Waterproofing, masonry coatings, roof coatings |
| Odor | Low |
As an accredited ELASTENE Acrylic Emulsion 300 factory, we enforce strict quality protocols—every batch undergoes rigorous testing to ensure consistent efficacy and safety standards.
| Packing | ELASTENE Acrylic Emulsion 300 is packaged in a sturdy 20 kg white plastic pail with a secure snap-on lid. |
| Container Loading (20′ FCL) | Container Loading (20′ FCL) for ELASTENE Acrylic Emulsion 300: 16–18 metric tons, packed in 200kg plastic drums or 1MT IBCs. |
| Shipping | ELASTENE Acrylic Emulsion 300 is shipped in tightly sealed, high-density polyethylene (HDPE) drums or intermediate bulk containers (IBCs) to prevent contamination and leakage. All containers are clearly labeled with product details and safety information. It should be transported upright, away from direct sunlight, extreme temperatures, and incompatible substances. |
| Storage | **ELASTENE Acrylic Emulsion 300** should be stored in tightly sealed original containers in a cool, dry, and well-ventilated area, away from direct sunlight, heat sources, and freezing conditions. Avoid storing near incompatible materials, such as strong oxidizing agents. Maintain temperatures between 5°C and 40°C. Keep out of reach of children and ensure containers are clearly labeled to prevent accidental misuse. |
| Shelf Life | ELASTENE Acrylic Emulsion 300 has a shelf life of 12 months when stored unopened in cool, dry conditions away from direct sunlight. |
As a dedicated chemical raw material manufacturer, we supply ELASTENE Acrylic Emulsion 300 to industrial clients seeking controlled performance in specialty coatings, adhesives, nonwoven binders, textile finishing, and paper processing. The following sections provide sector-specific details for key downstream applications, including compliance, formulation ratios, integration points, and resulting end products.
Manufacturers of architectural paints and construction coatings rely on this acrylic emulsion to formulate weather-resistant exterior and interior wall paints, primers, and textured coatings. Its composition supports enhanced film formation, water resistance, alkali resistance, and adhesion to mineral substrates, critical for extended building durability. Rigorous standards for indoor air quality and exterior durability inform both base formulation and quality control in the coatings sector.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Industrial producers of label stock, tapes, medical drapes, and protective films use our acrylic emulsion for water-based pressure sensitive adhesive formulations. Stability, adhesion–cohesion balance, and transparent clarity contribute to demanding applications, such as labeling for logistics or medical-grade tapes. Stringent QC, tack, peel, and shear standards govern formulation adjustments at each stage of adhesive manufacture.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
ELASTENE Acrylic Emulsion 300 acts as an essential fiber binder in production lines for nonwoven hygiene, construction geotextile, and filtration media. Its particle size distribution and crosslinking capability ensure both flexibility and wet strength, allowing substrates to pass downstream roll handling and converting operations. Markets such as disposable wipes and automotive filtration require traceable batch documentation with strict hygiene or anti-migration controls throughout the process.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Industrial processors in the textile sector employ ELASTENE Acrylic Emulsion 300 for coating and finishing technical fabrics, waterproofing applications, and formulating pigment pastes. Its usage results in durable, washable surfaces, as well as improved color retention and UV resistance for garments, banners, and industrial protective fabrics. Compliance checks at this stage are dictated by downstream exposure risks and customer specifications, involving stringent textile testing panels.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Paper manufacturers and converters use our acrylic emulsion to impart barrier and printable surfaces to packaging grades, specialty labels, and food-contact papers. Controlled particle size, high solids, and migration-tested components ensure coatings that meet both regulatory and performance requirements, especially for greasy, wet, or handled substrates. Adherence to documented migration and machinability controls guides every stage of implementation and audit.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Competitive ELASTENE Acrylic Emulsion 300 prices that fit your budget—flexible terms and customized quotes for every order.
For samples, pricing, or more information, please contact us at +8615365186327 or mail to sales3@ascent-chem.com.
We will respond to you as soon as possible.
Tel: +8615365186327
Email: sales3@ascent-chem.com
Flexible payment, competitive price, premium service - Inquire now!
Making ELASTENE Acrylic Emulsion 300 starts with years of trial, error, and real-world feedback, not just chemistry in a sterile lab. As a manufacturer, we gather knowledge from watching how contractors, painters, and formulating chemists use our emulsions on their sites and in their factories. We test under conditions that mirror real life more than just a technical spec. ELASTENE 300 did not come from a one-size-fits-all mindset. Our people handle countless feedback loops, listening to why a finish cracks too soon or why a wall coating can’t hold up under humid weather.
Years in this business teach us that not all acrylic emulsions are cut from the same cloth, despite similar chemical phrases on their paperwork. Different end-users want their product to handle different stresses: rolling on masonry, spraying onto cement board, brushing onto flexible waterproofing membranes. We consider this every time we develop or refine an emulsion, and ELASTENE 300 stands as a direct result of these priorities.
ELASTENE Acrylic Emulsion 300 comes out of our reactors as a milky white, finely dispersed emulsion with solid content tailored for demanding paint and construction coating sectors. Over multiple production cycles, we zero in on consistent viscosity and adequate particle size for stable storage and predictable mixing, even in humid or heat-prone climates.
We've always focused on keeping VOCs low. It didn’t start as a marketing line. Local regulations around the world grow ever-tighter, and our own employees want to go home healthy after a full shift at the plant. That’s why we implement a strict monomer selection and post-reaction purification, dialing in the balance between flexibility, adhesion, and safety.
ELASTENE 300’s film-forming properties matter most to customers tasked with crack-bridging work. Instead of promoting a product with vague durability claims, we take pride in technical strengths: after drying, films display strong elongation at break and rebound without sticking or running. Curing at room temperature brings out a coherent, flexible layer. We hear from customers whose coatings need to contract and expand after that first rainy season—ELASTENE 300 holds together in these cases, reducing site callbacks and touch-up costs.
Back in the early days, we often found customers frustrated with poor wet adhesion, especially on concrete with minor residual alkalinity. Store-bought acrylics sourced from traders often fail these tests, leaving film that bubbles or powders. We learned quickly that raw material purity, especially the stabilizing surfactants, directly affects onsite performance. Hence, our production lines run with precise control and monitored input quality, ensuring ELASTENE 300 can bond reliably to alkaline and mineral-rich surfaces.
Paint manufacturers using ELASTENE 300 in waterborne exterior paints have found greater open time, making large-area application feasible without constant edge retouching. The resin handles high pigment loads without sacrificing clog resistance or brush friendliness. We intentionally adjust the balance between hardness and flexibility to allow paint makers to hit local market preferences: some want more rubbery films for roof coatings; others look for harder finishes for wall applications.
Our emulsion works for both thick-build elastomeric coatings on vertical walls and thinner, rollable paints for horizontal surfaces, broadening its market reach. That's something we've seen in practice from repeat customers who move from wall coatings to new product lines like decorative flexible paints.
Gloss and surface texture often define customer satisfaction. Through field visits, we recognized the difference between a glossy, plastic-looking finish and a pleasing, semi-matte appearance. ELASTENE 300 dries into a surface with measured low sheen, masking unevenness in plaster without going chalky after UV exposure. We take sunlight seriously—several early versions discolored after a year outdoors, prompting us to refine our UV stabilizer package. A coating formulated with ELASTENE 300 retains its color and flexibility, even under tropical sun.
Chemical resistance also arose as a primary request from industrial users: anti-carbonation coatings, weatherproofing layers for parking decks, and anti-graffiti primers all require emulsions that can resist urban pollution, mild acids, or hand-applied cleaning. We run weekly lab simulations on actual city runoff to ensure consistent protection, and we base our end-product adjustments on those tests.
Breathability remains another subtle strength. Unlike some older, brittle acrylic emulsions, ELASTENE 300 allows water vapor to escape from masonry or plaster but blocks bulk water ingress. Customers painting new concrete discovered less blistering thanks to this character, especially where the substrate still holds residual curing moisture.
As a manufacturer, we don’t only compete on specs written on datasheets. On the factory floor and on customer sites, we see raw acrylic emulsions sold in bulk drums, indistinguishable to the naked eye, differentiated only by paperwork. Yet end-users often stumble on critical weaknesses in those generic products: poor freeze-thaw stability, unpredictable gloss, tough handling of thickener systems, and unreliable storage.
ELASTENE 300 eliminates these day-to-day headaches. Its colloidal stability allows for shipment through varying climates, so distributors in the north don’t deal with coagulated sludge after winter. Storage tanks on customer lines rarely jam, and mixing times drop as our emulsion disperses evenly with common pigment slurries and fillers.
Instead of reformulating or adding expensive compatibilizers, paint makers use ELASTENE 300 to lock in consistency between batches. We’ve cut down pigment flooding and cratering across hundreds of formulation trials. Many lower-end acrylics, including some commercial blends, struggle to match this predictability, especially under real-world heat-humidity cycles or repeated shipment.
Thicker build is possible without tipping over into unwanted flow or sagging. This edge supports customers working on anti-crack coatings or where elastomeric bridging is critical—important for concrete repairs and flexible waterproofing. Unlike standard acrylics, which tend to become brittle on heat aging, ELASTENE 300 remains supple after long sun exposure, as shown in our yearly outdoor panel testing.
Our blending staff have also observed reduced chemical incompatibility: less surfactant leaching, fewer coagulation issues, and less foam during high-shear mixing. Those behind the tanks and mixers see these daily. The emulsion meets real workloads where time and reliability matter more than raw price-per-kilogram.
We learn most from the contractors and applicators who come back to our factory or send us site samples. Government housing programs need affordable paints that can last on concrete block exteriors, withstanding sudden temperature swings. ELASTENE 300 underpins many of these coatings, keeping maintenance budgets low. In large-scale infrastructure, like highway bridges and sound barriers, our emulsion offers crack-bridging films that protect against freeze-thaw cycles and road salts.
We also routinely participate in product adaptation sessions with clients in the decorative market. For interior paints, ELASTENE 300 enables smooth, uniform walls even at higher pigment-extender blends, helping customers avoid roller marks while pushing for better covering power. This feedback loop helps us adjust our process and formulation each year, narrowing the gap between technical design and actual market needs.
In waterproofing, single-component roof coatings made from our acrylic emulsion show long lifespan with minimal chalking and no yellowing or tack, even after ponding water conditions. We test for long-term moisture uptake using simulated rain panels at our site, reflecting real seasonality instead of just textbook cycles.
The product’s journey did not end with its first market release. Every new complaint or performance gap we see on partner sites triggers another round of batch optimization. For instance, after seeing swelling and foaming complaints in some high-alkali cement overlays, we tweaked our emulsifier blend and adjusted post-reactor cleaning, resulting in better alkaline resistance and lower application foaming.
On thicker elastomeric coatings, our support teams almost always address customers’ requests for lower surfactant migration and increased pigment compatibility. We achieve this by precise monomer feed rates, better drum cleaning cycles, and regular post-batch QC panels, not just desktop predictions.
Customer reports of UV chalking in early versions led us to re-examine our stabilizer ratios, testing a wider range of anti-oxidants and light absorbers until the end film performed predictably both outdoors and in accelerated weathering cabinets.
Regional water variability creates new challenges: we routinely adapt ELASTENE 300 to local water hardness and salt content so customers avoid coagulation, regardless of factory location. These are not small differences—they determine plant uptime, worker safety, and the final look of a painted wall.
We also build flexibility into our order process, helping OEM brands tweak formulations for new environmental norms. Some regions want even lower VOC, others focus on antimicrobial needs for schools or hospitals. Adjustments are tested in our pilot plant before release, and only successful, stable changes make it into full-scale production.
In mature, regulated markets, our emulsion often serves DIY and professional painters who value clean application, low odor, and smooth finish. In rapidly developing regions, robustness against sub-par mixing water and rough site handling takes priority, so we ensure the stability package holds up in both environments.
Some clients request input on freezing or thawing resistance during shipping or site storage. We simulate real-world transit and repeated freeze-thaw cycles in our own plant, using ELASTENE 300 on test batches to guarantee the product avoids thickening or clumping, which affects both end-use application and factory throughput.
Product labeling and compliance paperwork reflect years of regulatory learning. As regulations shift, we preemptively audit and control subcomponents to stay ahead of international, national, and local thresholds for health and safety.
Real applications drive our improvement more than boardroom strategy. For example, feedback from field teams who apply coatings outdoors with basic tools often triggers process tweaks—lowering minimum film formation temperatures, adjusting flow agents, or re-balancing pigment compatibility.
At the paint factories, batch operators show us how stability and viscosity changes help or hinder their own production speed. Their daily experience, combined with our batch analytics, anchors the product’s evolution.
Chemical supply is about more than product delivery. Our technical team routinely helps clients troubleshoot mixing, foaming, and stabilization issues on their lines, using ELASTENE 300 as a known baseline. This hands-on technical presence means less wasted time, fewer rejected batches, and a steadier relationship between our plant and our partners’ facilities.
We provide application data and technical guides rooted in our own experimental results. These are not just marketing copy—they come from in-house and customer-trusted testing. In addition, we maintain a library of formulation suggestions for multiple applications, ranging from elastomeric waterproofing to decorative mattes and anti-carbonation coatings, drawing on consistent, real-life results.
Long-term customers often integrate their findings into our next round of improvement. For example, increased demand for graffiti-resistant surfaces on public infrastructure drove us to tweak the emulsion’s crosslinking, resulting in end-products that are easier to clean and maintain.
On a practical level, our batch consistency and direct communication cut down reformulation time for our clients, especially when moving between exterior and interior product lines. Operators and QA staff benefit by reducing trial runs and miscoloring, all of which impact cost and output on real jobs.
Support also means training sessions—in-person and digital—covering proper mixing, quality control, and troubleshooting root causes of film defect. We do this in partnership with plants scaling up from pilot to full production, so everyone knows what to look for at every stage, building trust and capability in the supply chain.
Traceability drives every shift in our plant. Each ELASTENE 300 batch receives a full materials audit, recorded in our internal system, leveraging decades of chemical manufacturing experience to spot issues early. Problems are not hidden in documentation; they are addressed by head-to-head review between manufacturing, QC, and technical support.
We openly share test results with clients who want to compare product runs over time or troubleshoot issues on their lines. This transparency builds credibility, and we welcome on-site audits or sample reruns at request. As direct manufacturers, we’re accountable for what leaves our door, and we believe that keeps the product trusted in the eyes of formulators, not just procurement departments.
On the environmental side, every step—from monomer sourcing to drum cleaning—undergoes review for waste and emission reduction. As regulations shift, we adapt operations to continue status as a preferred supplier not just by price, but by environmental and performance achievements. Our site holds regular reviews with clients and local representatives to improve both compliance and product features.
Rapid response forms another core part of our service. Coating failures or changes in formulation specs get our immediate attention, and field visits are always an option if remote diagnosis doesn’t suffice. This speed matters most during major project rollouts, where downtime means missed deadlines.
Every year brings new demands—higher weather resistance, resource-saving production, better sustainability. Our lab continues to test and refine ELASTENE 300 for new climates and stricter regulations. We invest in better raw materials, green-process design, and advanced analytics to catch potential issues early and chart the way to improved products.
Our commitment as the direct producer underpins every batch, every technical exchange, and every joint success in the field. Based on years of direct feedback, adaptation, and hands-on problem-solving, ELASTENE 300 maintains its standing as more than a commodity. It's a tool for those who demand durability, flexibility, and user-oriented performance in the toughest conditions.