| HS Code | 273425 |
| Product Name | AVANSE Acrylic Emulsion ST-410 |
| Type | Acrylic Emulsion |
| Appearance | Milky white liquid |
| Solids Content | Approximately 46% |
| Ph Value | 7.5 - 9.0 |
| Ionic Nature | Anionic |
| Film Forming Temperature | Minimum 20°C |
| Viscosity | 100-500 cP at 25°C |
| Density | 1.02 g/cm³ |
| Glass Transition Temperature | Approximately 11°C |
| Emulsifier Type | Surfactant Stabilized |
| Stability | Good mechanical and freeze-thaw stability |
| Odor | Mild |
| Water Resistance | Good |
| Recommended Application | Paints and coatings |
As an accredited AVANSE Acrylic Emulsion ST-410 factory, we enforce strict quality protocols—every batch undergoes rigorous testing to ensure consistent efficacy and safety standards.
| Packing | AVANSE Acrylic Emulsion ST-410 is packaged in a 50 kg blue HDPE drum with a tamper-proof lid and product label. |
| Container Loading (20′ FCL) | `Container Loading (20′ FCL)` for AVANSE Acrylic Emulsion ST-410: 80-100 drums (200 kg each) or 16-20 tons total per container. |
| Shipping | AVANSE Acrylic Emulsion ST-410 is shipped in tightly sealed, high-density polyethylene (HDPE) drums or intermediate bulk containers (IBCs) to prevent contamination or leakage. Containers are labeled in compliance with safety and regulatory standards. Store and transport the emulsion in a cool, dry place, protected from direct sunlight and freezing temperatures. |
| Storage | AVANSE Acrylic Emulsion ST-410 should be stored in tightly sealed containers, away from direct sunlight and extreme temperatures. Keep the emulsion in a cool, dry, and well-ventilated area, ideally at temperatures between 5°C and 40°C. Protect from freezing, contamination, or excessive heat to maintain product stability and performance. Avoid storing near incompatible materials or strong oxidizers. |
| Shelf Life | AVANSE Acrylic Emulsion ST-410 has a shelf life of 12 months when stored in unopened containers at 10–35°C, away from sunlight. |
As a direct manufacturer, we deliver AVANSE Acrylic Emulsion ST-410 for integration in a range of specialized industrial sectors. Our production focuses on precise output control, strict batch consistency, and technical adaptability for downstream applications where polymer film formation, adhesion, and resistance properties define end-product performance. Below, we detail specific industrial application scenarios, regulatory alignment, typical operational dosages, integration techniques, and the final products delivered by our clients in global supply chains.
Architectural coating producers apply ST-410 as a film-forming binder in interior and exterior waterborne paints, especially for high-washability walls, masonry, and decorative finishes. The self-crosslinking properties promote scrub resistance and reduce dirt pick-up in high-traffic commercial and institutional buildings. Formulators adjust dispersant, pigment, and coalescent packages to stabilize color and maintain application viscosity without compromising open time during professional spray or roller processes.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Downstream metal finishing operators leverage ST-410 for water-based anticorrosive primers on fabricated steel, galvanized parts, and aluminum profiles. The emulsion establishes cohesive adhesion over pretreated metals, locks in inorganic pigments such as zinc phosphate, and sustains flexibility after high-temperature baking or air drying. Coating lines with high throughput maintain film integrity under fluctuating humidity and mechanical stress.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Converters in flexible packaging utilize ST-410 to formulate high-tack, water-based acrylic adhesives for film-to-film or film-to-foil lamination. The polymer structure withstands high-speed gravure or flexographic coating without stringing, providing interlayer resistance to water vapor and oils. The component passes migration and organoleptic tests for non-direct food contact applications such as snack bags and pouches. Slitting and rewinding lines maintain bond strengths through thermal and mechanical post-processing.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Label and tape manufacturers employ ST-410 to develop permanent or removable pressure-sensitive adhesives (PSA) for roll-label and specialty tape production. The property profile supports fast, bubble-free convertibility at low and high line speeds. Adhesion balances high initial tack with long-term aging, moisture resistance, and low residual transfer, essential for labels on PET, glass, and deformable PE bottles. Enhanced compatibility permits precise formulation for clear and pigmented label constructions.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Textile finishers integrate ST-410 as a binder in pigment printing and surface-coating of technical fabrics. Its low formaldehyde profile and durable crosslinked matrix ensure resistance to repeated home or industrial laundering. The emulsion stabilizes print pastes on cellulosic, polyester, and blended substrates, supporting clean edges, high wash/abrasion fastness, and clear shade retention after curing, with non-yellowing properties under light and heat exposure.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Manufacturers of waterproofing products utilize ST-410 in formulating liquid-applied membranes and cementitious waterproofing slurries. The emulsion interacts with hydraulic binders to generate water-resistant barriers on concrete, masonry, and roof substrates. Its elasticity and crack-bridging enable success on new construction and restoration projects requiring lasting flexibility in climates with thermal or seismic cycling. Compatibility with fillers and mineral extenders provides cost-effective, high-coverage coatings for both horizontal and vertical surfaces.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Competitive AVANSE Acrylic Emulsion ST-410 prices that fit your budget—flexible terms and customized quotes for every order.
For samples, pricing, or more information, please contact us at +8615365186327 or mail to sales3@ascent-chem.com.
We will respond to you as soon as possible.
Tel: +8615365186327
Email: sales3@ascent-chem.com
Flexible payment, competitive price, premium service - Inquire now!
Producing water-based binders for the real world means confronting tough standards every day. As a chemical manufacturer, we work side by side with formulators, painters, and industrial chemists who let us know quickly when a product meets the mark—or when it falls short. AVANSE Acrylic Emulsion ST-410 demonstrates what can be accomplished by listening to those who use our binders on concrete, drywall, masonry, and other challenging surfaces. The ST-410 model is built for waterborne coatings and delivers robust film formation, early water resistance, and excellent adhesion, even on surfaces that usually give other acrylic emulsions trouble.
Cutting through marketing claims, what really matters is daily performance. Unlike generic acrylics that start to degrade with exposure to sunlight and humidity, AVANSE ST-410 features a customized polymer backbone. Our process engineers adjust the monomer ratios in-house, controlling both particle size and Tg. As a result, this emulsion achieves a balance—open-time and block resistance in the wet film, with steady hardness in the cured stage. We manufacture it with a solids content around 50% by weight, with viscosity maintained to suit both spray and roller application. Not every job calls for the same answer. Builders who demand higher scrub resistance or early block resistance see an uptick in failures when they use commodity latex; ST-410’s polymer architecture minimizes these compromises.
Coating manufacturers look for acrylic emulsions that don't force extra processing steps. Rework costs time and money, so predictable thickening and pigment compatibility count. ST-410 avoids common pitfalls found in lower-grade latex—foaming in the mixing tank, gel formation during high-shear stirring, and outgassing under humid conditions. Our technical team runs every batch through accelerated weathering and repeated freeze-thaw cycling. We do not ship a drum until quality metrics hit their benchmarks for minimum film formation temperature, pH stability, and gloss development.
Wall paints face assault from daily handling. Grease, vapor, frequent cleaning, and direct sunlight combine to shorten a coating’s lifespan when binders aren’t tough enough. ST-410 anchors pigments tightly, reducing color rub-off and maintaining fresh appearance even after a few hundred scrubs. In waterborne primer and finish formulations, we’ve seen the binder hold up where porous, chalky concrete or dusty drywall would otherwise lead to blistering and delamination. Unlike many wide-market acrylics, ST-410 forms a uniform dry film across both polar and nonpolar substrates, which stops the “picture framing” or uneven sheen that ruins project timelines and customer satisfaction.
Scaling from pilot production to commercial quantities exposes process gaps that can wreck consistency. We use batch reactors with direct digital control rather than retrofitted analog lines, which makes a clear difference. Each ST-410 lot receives gravimetric solids checks, FTIR confirmation of backbone composition, and real-world dry film application on multiple substrates. We track and record every deviation. The technical and quality assurance teams review data trends every week, not just along product launches. Drums leaving our line show lot-to-lot uniformity so painters and coating manufacturers don’t waste time “tuning” formulas for each new supply.
Every major resin supplier promises sustainability, but real implementation comes down to materials and process. We source monomers and surfactants with restricted residual monomer content and without alkylphenol ethoxylates. The plant runs closed-loop water recycling, reclaiming nearly 90% of processing water during pre-polymerization and wash stages. Waste streams from ST-410’s production carry less than 0.01% volatile organic content, well under the most demanding regulatory thresholds worldwide. We provide full transparency on composition—nothing hidden, nothing glossed over under “proprietary”. Regulatory and end-user audits regularly inspect not only paperwork but the processing areas themselves; every claim on batch cards can be traced from storage tank to packaging.
The difference appears during scale-up and manufacturing. With many off-the-shelf acrylic emulsions, formulating can mean months of troubleshooting unexpected thixotropy or unexpected pigment flotation. ST-410 offers dependable compatibility with a wide range of common and specialty pigments. We have seen the acrylic resin act as a robust vehicle even at high pigment volume concentrations. For filled coatings or textured paints, rheology remains manageable; the finished coating doesn’t separate or settle rapidly during storage. In high-shear dispersion, the emulsion resists foaming better than lower purity grades—saving defoamer usage and reducing microbubble defects in the final film.
Users have reported strong results with ST-410 in direct-to-concrete primers, weatherproof façade paints, and washable interior latex finishes. Industrial customers often work with high humidity and on substrates that stretch or flex, such as fiber cement, engineered woods, or exterior insulation systems. The emulsion’s resistance to alkali attack protects coating integrity—even where cheap acrylics break down and leach. Trials demonstrate faster recoat times without stickiness or soft film defects. In specialty coatings, such as road marking or high-reflectance wall formulations, ST-410 delivers high pigment load tolerance without gelling or separation, making it suited for both standard and custom applications.
Over 18 months of continuous deployment in Southeast Asian climate zones, ST-410-coated masonry endured monsoon cycles without visible film erosion or mold growth. Project partners conducting lab and field trials have highlighted improved chalking resistance in white masonry paints, withstanding over 600 hours of accelerated weathering in QUV chambers. Consulting formulators working on school interiors call out the improved stain resistance: crayon, marker ink, and cooking oil lift more easily than on conventional acrylic latex. Production painters appreciate noticeably fewer downtime events from clogged sprayer tips or film defects—signs of consistency not always picked up in the lab.
The production plant operates with full traceability, from raw monomer lot through post-polymerization handling. Unlike traders or resellers, as manufacturers our priority is the chemical integrity of every shipment. We source from primary suppliers whose facility audits we witness personally. We adjust polymerization parameters to balance molecular weight and cross-linking, targeting higher mechanical durability and lower dirt pick-up by design. Inline particle size checks keep the binder from drifting outside of optimal performance range. Customers report that such discipline translates to measurable savings in post-production quality control.
Research laboratories demand binders that welcome new pigment technologies, bio-based additives, and advanced rheology modifiers. ST-410’s broad compatibility paves the way for faster prototyping, meaning coating formulators trial new concepts without endless regrinding or testing for basic dispersion performance. Our own R&D chemists work directly with innovators to push the emulsion’s limits—thermal shock resistance, UV resistance, or improved breathability for specialized wall systems. Enthusiasm doesn’t excuse inattention to safety or environmental guidelines; every development goes through toxicology and workplace exposure checks.
Not every lab metric holds up after delivery. We have seen products that boast incredible mechanical or weathering performance in the test tube but fall apart under field stress: temperature swings, surface dirt, old paint layers. ST-410 delivers proven value because our partners feed data and feedback right back to the plant floor. Case in point: An Italian flooring customer running large-format cementitious tiles experienced bond failures after freeze-thaw cycling of standard acrylic latex. Testing with ST-410, the tiles maintained adhesion throughout, cutting callbacks and warranty costs. Such real-world performance comes from manufacturing that refuses to accept average results.
Modern construction demands clean-label ingredients. Our plant doesn’t rely on APEOs or restricted solvent carriers. Binders like ST-410 enable waterborne formulations to meet stringent emissions requirements for office, school, and healthcare builds. We measure residual monomer content batch by batch, maintaining a maximum of 500 ppm—one tenth the level allowed in most global regulations. End-users in European and North American green building programs confirm that wall and ceiling finishes built around ST-410 can achieve top indoor air quality ratings, smoothing the path to sustainability certifications and safe living spaces.
We engineer AVANSE ST-410 for the end user—be that a technician in a high-throughput paint shop or a craftsman on an industrial construction site. Supplying the same binder worldwide, without “special” export-grade substitutions, means every can, drum, or tote holds to the same performance standard. Our technical service team doesn’t just answer calls with lab data; they visit production lines, troubleshoot with your team, and bring known solutions from projects across the globe. Customers see quickly that working with an actual manufacturer delivers transparency and direct answers not found with traders or label-swappers.
Every batch of AVANSE Acrylic Emulsion ST-410 reflects years of real-world troubleshooting, feedback, and painstaking process control. Not every product can keep colors crisp under UV or fight off repeated cleanings; not every emulsion can handle pH extremes or aggressive surfactants. ST-410 earns its place by standing up to those trials, and our own feet-on-the-ground approach means your experience feeds straight back to the factory floor. If you’re ready to build new, tougher coatings, or to chase down stubborn application headaches you've seen with other acrylics, ST-410 stands ready to be part of your answer.