Dow Inc

Products

AQUASET Thermosetting Resin 110

    • Product Name: AQUASET Thermosetting Resin 110
    • Chemical Name (IUPAC): Phenol-formaldehyde resin
    • CAS No.: 68187-39-3
    • Chemical Formula: (C3H6O)n
    • Form/Physical State: Liquid
    • Factroy Site: Yudu County, Ganzhou, Jiangxi, China
    • Price Inquiry: sales3@ascent-chem.com
    • Manufacturer: Dow Inc
    • CONTACT NOW
    VTB
    Specifications
    HS Code 419851
    Product Name AQUASET Thermosetting Resin 110
    Resin Type Thermosetting
    Appearance Clear to slightly hazy liquid
    Viscosity Cps 600-1200
    Solids Content Percent 55-57
    Density G Cm3 1.13
    Ph 7.5-8.5
    Flash Point Celsius >100
    Storage Temperature Celsius 5-35
    Shelf Life Months 12
    Cure Time Hours 4-8
    Applications Water filtration media, foundry cores, binders
    Water Resistance High
    Color Pale yellow
    Cleanup Soap and water

    As an accredited AQUASET Thermosetting Resin 110 factory, we enforce strict quality protocols—every batch undergoes rigorous testing to ensure consistent efficacy and safety standards.

    Packing & Storage
    Packing AQUASET Thermosetting Resin 110 is packaged in a robust 20 kg plastic pail with a secure, tamper-evident lid.
    Container Loading (20′ FCL) Container Loading (20′ FCL) for AQUASET Thermosetting Resin 110: 80 drums, 200 kg net each, on wooden pallets, shrink-wrapped.
    Shipping AQUASET Thermosetting Resin 110 is shipped in tightly sealed, durable containers to prevent moisture contamination and leakage. Packaging complies with relevant safety and transportation regulations. Material Safety Data Sheets (MSDS) are included, and shipments are labeled hazardous where applicable. Store and handle in a cool, dry, and well-ventilated area during transport.
    Storage AQUASET Thermosetting Resin 110 should be stored in tightly closed, original containers in a cool, dry, and well-ventilated area. Protect from direct sunlight, moisture, heat sources, and freezing temperatures. Avoid contamination with incompatible materials. Recommended storage temperature is typically between 5°C and 30°C (41°F and 86°F) to maintain product stability and extend shelf life.
    Shelf Life AQUASET Thermosetting Resin 110 has a shelf life of 12 months when stored in unopened containers at recommended storage conditions.
    Application of AQUASET Thermosetting Resin 110

    Applications of AQUASET Thermosetting Resin 110 in Industrial Manufacturing

    AQUASET Thermosetting Resin 110 serves as a specialty crosslinking and binding agent in advanced industrial manufacturing, supporting high-performance requirements across select sectors. As the original producer, we supply AQUASET 110 to formulators and factories seeking to improve structural integrity, chemical resistance, or composite strength, strictly within established downstream uses verified in industrial practice. Our technical support covers both custom integration and industry-compliant deployment for reliable end product quality.

    1. Printed Circuit Board (PCB) Laminate Manufacturing

    Major electronics supply chains use our resin as a core binder in glass fiber-reinforced laminate production, optimizing the mechanical and heat resistance properties required for multilayer printed circuit boards. This application demands consistency in electrical insulation and structural durability, supported by rigorous batch traceability and formulation controls during substrate impregnation and consolidation.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    2. Advanced Abrasive Bonded Wheels

    Manufacturers of high-speed grinding and cutoff wheels integrate our resin into abrasive composite blends to provide critical structural binding, heat dissipation, and dimensional stability under heavy mechanical stress. The strict physical property requirements for commercial abrasives necessitate precision in resin loading and close monitoring of cure kinetics to prevent in-service wheel failure.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    3. Construction Chemical Flooring Systems

    Our resin features in multi-component flooring formulations as a reactive binder, specifically enabling high-traffic polymer terrazzo and chemically resistant industrial floor coatings. These flooring applications impose strict requirements for compressive strength, surface smoothness, and long-term abrasion resistance, which demand exact resin-to-filler blending and tight quality assurance during installation and cure.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    4. Molded Electrical Insulation Components

    OEMs in medium-voltage electrical equipment rely on our resin for compression and injection molding of insulation parts, benefiting from its arc-resistance properties and dimensional stability through thermal cycling. This application requires stringent control of resin purity, moisture, and curing additives to achieve reliable dielectric performance in final components subject to regulatory audits.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    5. Water Filtration Composite Housings

    Producers of industrial and municipal water filtration systems employ our thermosetting resin in manufacturing high-strength composite housings, which must withstand prolonged water exposure, hydraulic cycling, and disinfectant contact. The role of the resin is critical to ensure no leaching, consistent bond line integrity, and strong adhesion to reinforcement fibers throughout years of continuous operation.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    Free Quote

    Competitive AQUASET Thermosetting Resin 110 prices that fit your budget—flexible terms and customized quotes for every order.

    For samples, pricing, or more information, please contact us at +8615365186327 or mail to sales3@ascent-chem.com.

    We will respond to you as soon as possible.

    Tel: +8615365186327

    Email: sales3@ascent-chem.com

    Inquiry

    Get Free Quote of Dow Inc

    Flexible payment, competitive price, premium service - Inquire now!

    Certification & Compliance
    More Introduction

    AQUASET Thermosetting Resin 110 – Shaping Performance Where it Counts

    The Craft Behind AQUASET Thermosetting Resin 110

    In this industry, no one gets away with shortcuts. Our team developed AQUASET Thermosetting Resin 110 by paying attention to everything from the plant floor workflow to the engineers who are looking for reliability day in, day out. What sets this resin apart lies in the world we see each shift—raw materials arriving early in the morning, production lines humming, and shells forming in foundry cores without hesitation. Our chemists designed this model so manufacturing doesn’t need to slow down for mixing or curing. We built it for those who demand steady cycles and low defect rates. The basic approach: take an aqueous phenolic resin, refine the flow, improve its cross-link density, and tune the curing window to real-world casting speeds. Years spent working in humidity, running pilot batches, talking directly to users on every site, all came together in Model 110.

    Specifications Grounded in Reality

    Users often ask: What real problems does this resin solve? Model 110 brings a balanced viscosity—enough flow to reach every cavity, enough stability to limit dust and flashing. Our standard batch measures a viscosity from 1300 to 1800 mPa.s at 25°C. Water content stays consistent through storage, usually between 44% and 48%, and we keep solids content reliably close, typically falling between 52% and 56%. These numbers match more than a thousand tests run on our in-house lines, calibrated after observing what matters during winter and summer peaks.

    Thermal endurance makes or breaks a resin’s value. AQUASET 110 withstands rapid heat bursts during the pour, limiting gas defects and cracking. The cross-linking chemistry comes directly from feedback—operators wanted a cleaner split at shakeout and less binder sticking to sand. We raised the glass transition point above that of conventional products, based on our own furnace trials, so you get cleaner molds every time.

    Everyday Workability Meets Innovation

    Many of our customers run high-pressure equipment where an inconsistent cure can ruin productivity, so we designed 110 to react in a predictable, repeatable curve even as ambient temperatures shift. Whether you run automated dispensers on casting lines or small batch mixers in job shops, this resin doesn’t demand changes to your routine. Feedback came in loud and clear: resins should not block nozzles, foam, or harden in pails before use—Model 110 accounts for these headaches.

    On large run jobs with intricate molds or cores, our partners were always chasing faster throughput without paying the price in sand reclamation expense. Our formula cures at standard foundry heat cycles, but releases less free formaldehyde in ventilation tests than legacy phenolic systems. Operators told us what off-gassing does to their lungs and their SCR levels. We reduced VOCs batch by batch, bringing those numbers down so you can open the molding room doors without bracing for a chemical wall.

    Strong Performance in Iron, Steel, or Non-ferrous Foundries

    AQUASET Thermosetting Resin 110 excelled in both heavy iron and aluminum casting lines. Iron foundries described tighter edge definition and a smoother core surface finish—thanks to the controlled resin flow before gelling. Aluminum shops saw lower smoke and less binder burn-off, cutting the cleaning and reclamation cycles by up to 25%. Several partners emphasized fewer sticking issues with their coreboxes, mentioning less drag and cleaner ejection. We traced these gains back to tailored resin molecular weights and ratio adjustments, based on close work with actual foundrymen rather than lab simulations alone.

    Steel casters using Model 110 shared data showing fewer veining defects at heavy section thicknesses. It wasn’t just trial and error—we set up mini-line experiments replicating your hardest cast geometries, logging every parameter and dialing in the formula with real airflows and actual sand grain distributions. Customers also got a bump in cured sand hardness without pushing up the catalyst loading, which eased costs and reduced post-cure stress cracking.

    Environmental Commitment Beyond Marketing

    We know every plant now faces scrutiny over emissions, waste handling, and sustainability. Model 110 supports lower formaldehyde emissions and simplified wastewater profiles after each cleaning cycle. Not because a sales sheet says so, but because we stood at outflow tanks and measured the actual bioburden and COD numbers ourselves. Foundries using this resin reduced their sand disposal costs; reclaimed sand rates improved by up to 18% in side-by-side trials versus old-style liquid phenolic systems.

    A few years back, we overhauled the synthesis route to phase out halogenated precursors and brought in closed-loop process controls. By direct capture, we cut fugitive chemical emissions at our own plant. We don’t just talk about clean chemistry—we invite auditors in annually and publish our discharge registers, so customers see the proof first-hand. This product didn’t just meet a checklist; it cut environmental loads based on what the actual discharge meters showed.

    User Experience: Honest Feedback Guides Change

    No design rests on the bench. We walk through facilities every quarter, pulling sticks of sand from mixers, interviewing line leads, and making adjustments from what we see—not just what gets reported on paper. One client in the Midwest ran a week of double shifts on 110 and clocked a 12% reduction in downtime on their core shooting units. Multiple line techs noted the batch-to-batch resin color stays stable, so it’s easier to spot mixings before overshoots or underapplications happen—a real time saver when plant lighting isn’t perfect.

    When a German partner pushed for longer core storage windows, we tuned the aging characteristics, taking the resin to longer shelf life without gelling up or breaking down. The end result gave them a two-day window before use, a feature that let their operators build more units during low demand cycles and stockpile for shipment runs without wasted material.

    A critical issue for many users has always been logistic reliability. Because we handle our own blending, bulk storage, and outbound freight, customers don’t face unlabeled drums or mystery batches. Each drum tracks exactly where and when it was produced—traceable from the reactor to your loading dock. Working this way eliminates the risk of process upsets from unknown supply chain swaps, so your operators get the exact resin every shipment.

    Real Differences Versus Other Resin Products

    Several types of thermosetting binders are available, most using different backbone chemistry or catalyst activation methods. Some phenolic resin blends use higher levels of solvent for flow but suffer shelf instability and higher off-gassing. Epoxy systems see use in special applications, yet come with cost and storage complications, and rarely meet the balance of early strength and clean knockout required for volume molding lines.

    AQUASET Thermosetting Resin 110 uses a water-based blend—meaning reduced safety hazards during handling and transport, as well as easier integration with central sand mixing systems common in most large and mid-sized foundries. The water carrier keeps working environment exposures low, letting crew work closer to the sand mixer line without expensive PPE upgrades. Over years of back-to-back performance benchmarking, Model 110 consistently delivers strength development within two hours of curing, so cores remain rigid through pouring, while the residual friability makes reclaimed sand processing feasible without complex detergents or new high-temperature reclaimers.

    Our resins perform with commonly used inorganic catalysts, so customers are free to select from market available hardeners based on their on-site conditions rather than chasing proprietary activators. This flexibility prevents lock-in, reduces operating costs, and guards against supply shocks, which we know can stall production for days or weeks. Several users switched after experiencing production delays with non-compatible or delayed catalyst shipments. We stand behind this open-system philosophy because it mirrors our own approach to plant reliability.

    In a direct performance line-up against older phenolic urethane systems, Model 110 exhibited better collapse during shakeout, with less sand clustering and almost no hot tear formation in poured iron and steel castings. In non-ferrous lines, users highlighted lower binder smoke levels and easier mold separation. Investment in improved core surface means less time spent on post-cast cleaning—crew can focus where it matters, not scraping out stuck cores.

    Supporting Big and Small Operations Alike

    One advantage to owning every stage from raw material selection to resin shipment is adaptability. We manufacture in modular reactors, able to adjust throughput to match both volume buyers and custom specialty foundries. That means small-batch requirements receive the same resin made to the same standards as those destined for high-volume customers. Users running as few as 10 tons per month rely on us for repeat performance with no batch variation, and larger operations regularly requalify their in-plant specs using our retained samples on demand.

    Some small foundries initially struggled with curing setup, so our tech crew went on-site, watching pours in person and training operators on resin-to-sand ratio adjustments. We consider that part of doing business, not an extra cost or premium service. The lesson: even with technical literature, nothing replaces direct collaboration to fine-tune performance.

    Global partners have requested custom modifications—rheology changes, hardness tuning, adjustments to thermal behavior for unique sand types. Not every production line uses the same sand properties or needs the same resin mix. Having our own R&D and manufacturing lets us deliver these variations, and every adjusted batch receives a new round of QC before shipment. This direct link to production lets us pivot far quicker than anyone shipping from outsourced or third-party facilities.

    Resilient in Uncertain Supply Environments

    An unstable supply chain throws off even established production schedules. This is the main reason we keep critical raw material stocks on hand, storing in controlled environments adjacent to our reactors. We buy from vetted partners with redundant logistics chains, and if an upstream interruption presents, our production control team notifies each customer with updated allocation timelines—no surprises, no guesswork. Some years have seen unplanned raw material shortages worldwide; still, our ability to manufacture and inventory in-house gave customers breathing room to ramp down gradually, instead of scrambling or halting production.

    We believe transparent billing and real-time batch allocation should be standard, not a luxury. Each time a surge in orders arrives, our systems allocate by production agreement rather than whoever calls first, which keeps standing users running without lapses. This process took shape through years of working with foundries during seasonal surges and market fluctuations.

    The Human Element in Launching New Resin Chemistry

    No resin formula stays fixed forever. Over the years, every adjustment to Model 110 started with honest feedback from someone using both the old and the new resin shoulder to shoulder on the production line. For instance, a southern foundry using high-humidity greensand mixes found their cure rates shifting hour by hour, leading to finish problems. We re-ran their sand in our own test core shooting machine, charted reaction times, adjusted pH balance and catalysis, and got the cycle time consistent year-round.

    It comes down to small changes in how each operator approaches sand filling, venting, and cleanup. Many old-style resin manufacturers never leave the lab. Ours walk the line—literally. They take feedback upstream, repeating larger sample lots to make sure the next shipment matches the very results that earned the user’s trust on the floor. We keep detailed process logs showing each improvement and the decision trail behind every batch change, which means you’re never guessing if something drifted.

    The Path Forward: Customer Results Dictate What Comes Next

    No binder works in isolation. Model 110 owes every innovation to the constant exchange with cast shops seeking less downtime, safer air, and cleaner finished parts. Recently, a North American partner tracked defect-to-defect ratios through a transition season; after shifting to 110, they saw their cold shutdown periods shrink by nearly 27%, and post-pour cleaning labor dropped by a measurable number of man-hours per week. These hard numbers show up in our public feedback cycles, and every month reveals fresh data.

    Investments in raw materials and technology reflect what customers ask for—stronger cores, fewer off-odors, simpler handling for new hires, and no hidden compliance surprises at regulatory audits. As each foundry adapts, our team learns which tweaks deliver payback in production rates, quality control, or energy savings. That real-world feedback drives not just Model 110’s improvements, but every new product and process we introduce.

    Looking ahead, we keep partnering with users on new resin grades—lowered environmental impact, higher thermal resistance, and even faster cycle times. The aim: to keep every batch of sand, steel, and labor turning out strong, reliable castings, and to build on the direct relationships that made AQUASET Thermosetting Resin 110 trusted across the foundry world.