Dow Inc

Products

Diethylene Glycol (DEG)

    • Product Name: Diethylene Glycol (DEG)
    • Chemical Name (IUPAC): 2,2'-oxybis(ethan-1-ol)
    • CAS No.: 111-46-6
    • Chemical Formula: C4H10O3
    • Form/Physical State: Liquid
    • Factroy Site: Yudu County, Ganzhou, Jiangxi, China
    • Price Inquiry: sales3@ascent-chem.com
    • Manufacturer: Dow Inc
    • CONTACT NOW
    VTB
    Specifications
    HS Code 820578
    Chemical Name Diethylene Glycol
    Abbreviation DEG
    Cas Number 111-46-6
    Molecular Formula C4H10O3
    Molecular Weight 106.12 g/mol
    Appearance Colorless, hygroscopic liquid
    Odor Slightly sweet
    Melting Point -10.45°C
    Boiling Point 244.8°C
    Density 1.118 g/cm³ at 20°C
    Solubility In Water Miscible
    Flash Point 143°C (closed cup)
    Viscosity 36 cP at 25°C
    Vapor Pressure 0.01 mmHg at 20°C

    As an accredited Diethylene Glycol (DEG) factory, we enforce strict quality protocols—every batch undergoes rigorous testing to ensure consistent efficacy and safety standards.

    Packing & Storage
    Packing Diethylene Glycol (DEG) is packaged in a 200-liter blue HDPE drum with secure sealed cap and clear hazard labeling.
    Container Loading (20′ FCL) 20′ FCL container loads Diethylene Glycol (DEG) in ISO tanks or drums, ensuring secure transport, compliance, and leak-proof packaging.
    Shipping Diethylene Glycol (DEG) is shipped in tightly sealed, corrosion-resistant drums, totes, or bulk tankers. It must be kept away from strong oxidizers and moisture. Standard labeling for hazardous chemicals is required. During transportation, containers should be secured to prevent leaks and comply with local, national, and international regulations.
    Storage Diethylene Glycol (DEG) should be stored in tightly closed containers, made of materials compatible with DEG, such as stainless steel, in a cool, dry, and well-ventilated area. It should be kept away from strong oxidizers, acids, and moisture. Storage areas must be clearly labeled, with suitable secondary containment to prevent spills, and protected from direct sunlight and sources of ignition.
    Shelf Life Diethylene Glycol (DEG) typically has a shelf life of 2 years when stored in tightly sealed containers, away from moisture and light.
    Application of Diethylene Glycol (DEG)

    Applications of Diethylene Glycol (DEG) in Industrial Manufacturing

    As a direct manufacturer of Diethylene Glycol, we support industrial clients with consistent supply, quality batch control, and technical expertise. The following application scenarios represent primary end-uses in mature downstream sectors, with an emphasis on compliance, real formulation practice, and integration into customer operations.

    1. Unsaturated Polyester Resin (UPR) Production

    Our material acts as a critical co-monomer in unsaturated polyester resin synthesis. Formulators select DEG to control resin viscosity and reactivity, which directly impacts curing behavior and mechanical performance in glass fiber composites. Resin batches integrate DEG via esterification with phthalic anhydride and maleic anhydride, creating backbone chains suitable for demanding composite applications such as boats, automotive panels, and construction panels. The use of DEG is governed by both final performance specs and reactivity window as set by individual composite manufacturers’ requirements and related regulations.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    2. Flexible Polyurethane Foam Manufacture

    Industrial formulators incorporate DEG as a chain extender and plasticizer to modulate foam hardness, improve open-cell structure, and control processing flow. Adjustments in DEG levels allow foam manufacturers to balance elongation and tensile strength in end-use consumer products as well as industrial mattresses and insulation sheets. Typical usage follows customer-specific technical data sheets and must adhere to downstream fire safety, emissions, and physical property regulations for bedding and furniture applications.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    3. Industrial Coolant and Heat Transfer Fluid Formulation

    DEG enables large-scale blending of engineered heat transfer fluids for closed-loop industrial cooling, especially where moderate freeze protection and thermal stability are required. Blenders choose DEG for thermal expansion control and manageable viscosity at low temperatures. Downstream operations must observe legislation on toxicity and environmental safety, especially for fluids used in HVAC systems and process cooling equipment across food, pharmaceutical, and building sectors.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    4. Solvent in Printing Ink and Dye Intermediates

    Printing ink companies use DEG as a high-boiling solvent to improve pigment dispersion and print quality. Its presence ensures appropriate solubility for dye intermediates and prevents premature drying in high-speed inkjet and flexographic applications. DEG also modulates ink viscosity for precise color transfer onto paper, cardboard, and synthetic substrates. Regulatory controls concern residual solvent content, worker safety, and emission limitations during large-batch ink processing and end-user printing operations.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    5. Gas Dehydration in Natural Gas Processing

    Natural gas processing plants inject DEG in dehydration units to absorb water vapor from wet natural gas streams. Proper DEG circulation reduces the dew point, controls hydrate formation, and protects downstream equipment from corrosion and blockages. Plant operators monitor material purity and regenerator column operation to align with process safety, pipeline gas standards, and environmental benchmarks for emissions and chemical handling.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    6. Brake Fluid Formulation (DOT 4 Type)

    Automotive chemical formulators use DEG as a glycol base fluid for DOT 4 brake fluid blends. This maintains low volatility, proper viscosity, and high boiling point to prevent vapor lock and ensure safe hydraulic performance. Quality teams monitor moisture content and acid formation over product life, as outlined by automotive and regulatory bodies. Compliance rests on achieving performance benchmarks for pressure cycling, corrosion tests, and chemical stability in distributed brake systems.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    Free Quote

    Competitive Diethylene Glycol (DEG) prices that fit your budget—flexible terms and customized quotes for every order.

    For samples, pricing, or more information, please contact us at +8615365186327 or mail to sales3@ascent-chem.com.

    We will respond to you as soon as possible.

    Tel: +8615365186327

    Email: sales3@ascent-chem.com

    Inquiry

    Get Free Quote of Dow Inc

    Flexible payment, competitive price, premium service - Inquire now!

    Certification & Compliance
    More Introduction

    Diethylene Glycol (DEG): Perspectives from the Factory Floor

    Walk down any aisle in our facility, and you’ll notice the faint, sweet scent of diethylene glycol as raw tanks quietly cycle product towards their next destination. This is a substance we’ve worked with for decades, and every drum and container embodies our accumulated expertise—not just in handling and production, but in understanding what our customers actually need from the chemical. What seems simple in a laboratory—clear, hygroscopic, slightly viscous liquid—reveals its real personality when processed at scale and delivered where the reliability of supply affects everything downstream.

    What Diethylene Glycol Offers in Our Hands

    Our team produces DEG with careful attention to purity, water content, and consistency. Every batch, we conduct a battery of tests, including gas chromatography checks and moisture analysis, drawn from years refining our processes. Industrial users expect purity generally above 99.5 percent. We see firsthand what small shifts in producer discipline can mean for a customer’s end-product—yellowing in cosmetic gels, brittle polyester in resins, unwanted residue in antifreeze—so we've set up round-the-clock monitoring. The feedback loop between our quality control lab and production managers keeps lots steady. Consistency matters more than occasional high scores, and that’s a lesson that only comes with time in the business.

    Our DEG usually contains less than 0.05 percent water by weight, and contains traceable, tightly controlled levels of organic impurities, like ethylene glycol and triethylene glycol. This isn’t just a regulatory thing. If you’ve ever run a batch through a reaction kettle and had to dump it because unwanted cross-linking or side reactions got loose, you know why those specs matter. We don’t just post a certificate of analysis and call it a day—we help our customers troubleshoot, walking them through titration quirks or what to do if a shipment has condensation in the drums.

    How Customers Use Our DEG

    Most buyers come to us for three major uses: as a plasticizer in manufacturing resins, as a humectant in tobacco or personal care products, and as a solvent in industrial applications. The diversity surprises new employees, but for us it’s business as usual. DEG flows into alkyd resin plants, where it’s usually charged by weight in carefully measured ratios. The reliability of the product’s reactivity profile determines how the final coating or adhesive will cure and perform. Small changes in the hydroxy functionality or contamination with other glycols can derail a process, changing setting times or even ruining thousands of liters of finished resin.

    In cigarette factories, DEG helps keep tobacco moist and pliable. We’ve worked with customers on moisture migration, which gets tricky if the product picks up water from humid warehouses or loses it in dry climates. Our approach isn’t just about specification—it’s about being reachable when a customer calls on a Friday night because a finished product is too brittle to process. Years ago, we had a run where our DEGs water content was just slightly high from a faulty condenser. That batch was rejected by the customer, so now every operator in our plant knows why we harp on point-five percent water.

    On the solvent side, DEG’s low volatility and good solvency toward many organic compounds make it a favorite in dye solutions, textile lubricants, and as a dispersant for agricultural chemicals. There’s always talk about alternative glycols, but few come close to DEG’s unique balance between solvency, price, and miscibility. Our customers in the dye industry in particular appreciate this, since DEG doesn’t evaporate as quickly as MEG or cause the same handling headaches as more reactive glycols.

    Comparisons with Other Glycols: What Matters in Practice

    Often, customers ask about the differences between DEG, MEG (monoethylene glycol), and TEG (triethylene glycol). These compounds can look and smell similar, so the differences seem minimal to those unfamiliar with processing. In practice, though, each has a different set of trade-offs. MEG, more volatile and with a lower boiling point, fits well in polyester and antifreeze blends but tends to off-gas or pick up water too quickly. TEG, heavier and less volatile, finds its niche in desiccants and gas dehydration because of its stronger affinity for water vapor.

    DEG lies right in the middle. Its viscosity and solvency help plasticizers achieve just the right flexibility, without leaching or hardening. In antifreeze formulation, DEG offers a lower freezing point than MEG, and it resists boiling off under stress, which matters in climates with broad temperature swings. In resins, we’ve seen it substitute for either MEG or TEG at the right proportions, depending on desired film flexibility, but the practical limits always show up in the pilot plant trial—not in theory. The sweet spot of DEG’s properties makes it irreplaceable for certain niche blends, despite the persistent myth that glycols are essentially interchangeable.

    The Human Side of Manufacturing DEG

    Operators on our floor handle hundreds of tons of DEG per month, sometimes in bone-dry ambient winter, other times in muggy summer heat. The hygroscopic property of DEG means containers must be sealed immediately after filling, and transfers require dry nitrogen blanketing to suppress water uptake. We’ve seen otherwise good batches go off-spec because of a cracked gasket or a ten-minute pause in filling, resulting in moisture creeping into the product. It’s the sort of thing that textbooks mention, but only experience teaches the cost of one careless moment.

    On the shipping and logistics end, our warehouse team manages containers ranging from 200-liter drums to full ISO tanks. Every load needs pre-shipment checks for tightness and cleanliness since even residues from other glycols or solvents can contaminate the DEG. Bulk customers frequently rely on our documentation to meet regulatory requirements. We maintain traceable batch data for at least five years, and we keep all load-out areas under close video and manual supervision. Our clients include multinational resin compounding plants and small specialty glue houses alike, but everyone expects the product to arrive pure and dry.

    Challenges and Solutions in DEG Production

    Like most commodity chemicals, DEG faces pricing and supply chain volatility. We source feedstock from closely vetted suppliers, often working with ethylene oxide producers who themselves operate with variable input streams. Feed quality directly affects downstream product quality. There are years when oversupply pushes prices below breakeven, forcing a rethink of shift schedules and plant maintenance intervals. On the upswing, shortages threaten production contracts, and we dig deep into secondary sourcing relationships that have taken years to build.

    We don’t see these cycles as a nuisance, but as a test of our systems. By tracking internal process yields, recycling off-spec material, and investing in process automation, we've managed to smooth out the worst shocks. Our R&D group developed a catalyst recycling method years ago that now forms the backbone of our quality system, reducing variability and improving yield by a measurable amount. When raw DEG comes off the distillation column, our senior engineers don’t just rubber-stamp the readout—they recalibrate equipment based on drift observed over years, not just hours. Those operator logs and calibration notebooks help spot trends before the customer ever feels them.

    Handling Safety and Environmental Responsibilities

    DEG presents real handling hazards, particularly toxicity through ingestion or prolonged skin contact. We’ve watched the industry transform in response to well-known poisoning incidents. Our plant adopted closed handling systems nearly ten years ago, including vapor recovery for all transfer operations and employee health monitoring twice yearly. Every new staff member receives hours of direct hands-on training, learning not just the rulebook but the concrete consequences of a misplaced gasket or an unsealed drum.

    We keep our emissions low by capturing DEG vapors and recycling wash water. Waste streams are monitored with both online analyzers and spot audits, because it only takes one blocked valve to remind us of the risk. We work closely with local environmental authorities and routinely share audit data so that no gaps develop. Compliance here is not just meeting a minimum—it’s what keeps neighbors comfortable hosting a chemical company in their community.

    Continuous Improvements and Looking Ahead

    Every few years, supply chain trends or new regulations push us to rethink parts of our operation. Sometimes it’s about tightening trace impurity controls to meet Japanese or European food-contact standards. At other times, customers challenge us to supply drums with even lower moisture levels or guarantee origin down to the lot. Around half our new capital expenditure goes into process automation and analytics, not just because of efficiency but to help spot tiny deviations before they become headaches.

    In the past, mistakes grew from communication breakdowns—production thinking logistics could catch a minor water excursion, or sales misunderstanding a key customer spec. Our facility culture focuses on cross-department meetings and information flow because technical slipups almost always start with someone not speaking up about a concern. Now, we encourage operators to flag anything unusual, no matter how small, and our technical team keeps customer feedback channels open, even after the sale clears.

    Global Market Forces and Responsible Sourcing

    Raw DEG production starts from ethylene oxide, tying our fate to the rhythms of global hydrocarbon markets and plant uptime half a planet away. In some years, hurricanes in Texas or government directives in Asia affect prices and supply more than our own plant conditions. That drives us to diversify not only feed suppliers but transport routes and storage arrangements. Quality still sits at the forefront, so alternative sources must match our internal specs before they see the blending tanks.

    The surge in global interest for recycled and bio-based feedstocks is both an opportunity and a challenge. Our technical team tracks advances in bio-ethylene oxide and sustainable diol chains, watching for solutions that align with performance and cost expectations. Customers regularly ask us about environmental certifications, so we publicly share our carbon accounting audits. For some, this is mostly paperwork, but for a growing share of the market, these numbers factor into buying decisions.

    Truths Learned Over Time

    Anyone can list out the boiling point or density of DEG, but true reliability comes from addressing the inevitable exceptions—odd color hues, unexplained gelation, trace contaminants showing up at parts-per-million. Our customer support group doesn’t read from a script. They draw on our own history, troubleshooting issues using case files or reaching out to a process chemist who remembers a similar incident years earlier.

    Long-term buyers frequently share their own stories—how a subtle shift in reactivity affected a whole batch of resin, or how tiny impurities created unexpected haze in personal care gels. We treat these as opportunities to improve together. Every season brings its own surprises, sometimes in the form of drum packaging failures in hot climates, other times in bulk shipment delays due to port slowdowns. We have processes for those problems now, rooted in years of both occasional failures and steady recovery.

    Real-Life Applications: What DEG Enables

    Polyester resin manufacturers rely on DEG to achieve flexibility and processability. In polyester polyols, critical for polyurethane foams and coatings, DEG’s diol functionality fine-tunes chain branching and molecular weight. We partner with resin houses to dial in process conditions that yield the desired foam texture or film durability. A hundred liters of subpar DEG can disrupt days of production. Those stakes keep our technical hotline staffed and our maintenance teams vigilant.

    Textile producers prize DEG’s solvency for disperse dyes, as it helps achieve color saturation without harming fiber structure. In ink and printing sectors, DEG controls drying rates so graphics don’t smudge or run. In heat transfer fluids and coolants, customers turn to DEG for its freeze protection and stability over repeated cycles, appreciating its lower vapor pressure and slower degradation at high temperature.

    Some personal care manufacturers still use DEG in limited, strictly controlled applications, leveraging its hygroscopic properties to balance viscosity and texture. We only supply product meeting specific purity criteria for these sensitive markets, and our compliance file includes certificate-of-analysis data for years past. Any supply into this area passes through both our own and customer’s laboratories for screening.

    Where Customers Influence What We Make

    Long gone are the days when a chemical producer just filled drums and shipped them to faceless buyers. Our customers routinely challenge us with requests: lower trace element levels, dedicated production campaigns, or specialized packaging. We've built out separate transfer lines and storage tanks just to avoid cross-contact with other glycols or solvents, because trust in supply is non-negotiable for many industries.

    Some requests seem small—like new drum liners or pre-inspected seals—but if it saves an end-user from product recalls, we invest without hesitation. We maintain open doors for plant visits, where buyers can walk the line and see their product moving from reactor to tank, all while discussing any concerns with technical and safety leads directly. Those relationships anchor our approach: chemicals don’t just move by the ton, they build businesses batch by batch.

    Improvement Never Stops

    We’ve learned (sometimes the hard way) that continuous upgrade is the only path to real, sustainable manufacturing. New process controls—like advanced moisture meters or real-time gas detection—add another layer of reliability. We still run old-school impurity spot tests, since machines can fail in ways a human operator never would. Training courses stay fresh, with lessons learned being folded back into both operations and technical documentation. No amount of automation replaces eyes on the ground, and every shift includes veteran staff who act as mentors for newcomers.

    It’s not just about meeting spec, but about looking upstream and downstream. Our process improvement specialists interview both suppliers and customers, gathering feedback from every link in the chain. When we find recurring issues—from tank truck contamination on unloading to stubborn haze in a polyol blend—we chart root causes and adapt our standards or procedures, not just the paperwork. That’s where most gains are made: a hundred small steps, hardly noticed except by those whose daily job is to make chemicals work in the real world.

    Final Thoughts from the Producer’s View

    Making DEG on an industrial scale lets us see beyond simple technical data into the detail that distinguishes reliable chemical supply from the hit-or-miss. A tank of glycol isn’t just a commodity—it’s a record of craft, vigilance, and responsiveness. Every analysis, process change, and customer call adds another layer of knowledge to what we deliver. Through fluctuating markets, evolving regulation, and technical surprises, we’ve built a way of working that doesn’t just meet a target—it creates confidence.

    We invite anyone interested in the real-world performance, supply assurance, or questions on DEG to reach out and compare notes—not just the numbers, but the stories and lessons earned over years of hands-on production. Reliability, after all, is something you make every day, with every batch, on every shift.