| HS Code | 889925 |
| Product Name | PRIMENE Amine / Fuel Additive JM-T |
| Chemical Type | Alkyl Primary Amine |
| Appearance | Light yellow to amber liquid |
| Odor | Amine-like |
| Boiling Point | Over 260°C |
| Density | circa 0.81 g/cm3 at 20°C |
| Flash Point | Above 113°C (closed cup) |
| Solubility In Water | Insoluble |
| Viscosity | 5-7 mPa·s at 20°C |
| Typical Use | Fuel additive for corrosion inhibition and lubricity improvement |
| Pour Point | -17°C |
| Primary Application | Diesel, gasoline, and distillate fuels |
| Cas Number | 68553-14-0 |
| Storage Condition | Store in cool, dry, ventilated area |
| Stability | Stable under normal conditions |
As an accredited PRIMENE Amine / Fuel Additive JM-T factory, we enforce strict quality protocols—every batch undergoes rigorous testing to ensure consistent efficacy and safety standards.
| Packing | **PRIMENE Amine / Fuel Additive JM-T** is packaged in a 200-liter (55-gallon) steel drum, securely sealed and clearly labeled. |
| Container Loading (20′ FCL) | Container Loading (20′ FCL) for PRIMENE Amine / Fuel Additive JM-T: Typically shipped in 20’ containers, ensuring secure transport, optimal storage, and compliance with safety regulations. |
| Shipping | PRIMENE Amine / Fuel Additive JM-T is shipped in accordance with relevant chemical transport regulations. Packaging typically includes drums or totes that are securely sealed and labeled. Shipments require proper documentation and handling procedures to ensure safety. Avoid exposure to extreme temperatures and incompatible materials during transit. Check all applicable local and international shipping regulations. |
| Storage | PRIMENE Amine / Fuel Additive JM-T should be stored in tightly closed, properly labeled containers in a cool, dry, and well-ventilated area away from heat sources, open flames, and direct sunlight. Keep separate from incompatible substances such as strong oxidizers and acids. Avoid contact with moisture and minimize exposure to air to prevent product degradation and ensure safe handling. |
| Shelf Life | PRIMENE Amine / Fuel Additive JM-T has a shelf life of 24 months when stored in unopened containers under recommended conditions. |
As a direct manufacturer of PRIMENE Amine / Fuel Additive JM-T, we supply this raw material to a range of industrial sectors where its unique high-branched structure and functional amine properties serve critical formulation roles. Below are real application scenarios detailing integration points, compliance factors, dosage levels, and resulting downstream products.
Engine manufacturers use PRIMENE-based additives in gasoline formulations to suppress intake valve deposits, clean injector tips, and maintain combustion efficiency over long operating periods. The amine's chemistry addresses solubility challenges in fuel systems and supports emission control by limiting residue buildup during fuel combustion.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
In jet fuel production, PRIMENE Amine derivatives serve as stabilizers that inhibit thermal oxidation and prevent gum formation during extended storage or high-altitude exposure. This application helps maintain fuel cleanliness and flow, meeting demanding reliability standards for commercial aviation.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Manufacturers formulate heavy-duty engine oils and industrial lubricants with PRIMENE Amine as a corrosion inhibitor, utilizing its strong base properties to neutralize acidic byproducts and protect metal surfaces. Its ability to form protective films at critical interfaces increases the service life of engines and hydraulic systems, especially in harsh industrial environments.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
In the production of metalworking fluids, compounders use PRIMENE-based neutralizers to adjust alkalinity and support bacteriostatic performance, essential for coolant emulsion stability and long-term system cleanliness. Precision in formulation prevents tool corrosion and ensures coolant emulsions meet customer machining requirements.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Polymer producers employ PRIMENE Amine derivatives as effective antistatic agents in the extrusion of polyethylene and polypropylene films. These additives migrate to the film surface, dissipate electrostatic charges, and improve handling characteristics during high-speed processing and conversion.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
In road construction, formulators use PRIMENE Amine as an anti-stripping agent that enhances asphalt-aggregate bonding. This function is critical for highway and bridge projects exposed to water ingress and temperature cycling. Improved adhesion increases pavement longevity and reduces maintenance frequency.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Competitive PRIMENE Amine / Fuel Additive JM-T prices that fit your budget—flexible terms and customized quotes for every order.
For samples, pricing, or more information, please contact us at +8615365186327 or mail to sales3@ascent-chem.com.
We will respond to you as soon as possible.
Tel: +8615365186327
Email: sales3@ascent-chem.com
Flexible payment, competitive price, premium service - Inquire now!
Every plant that produces specialty petrochemical additives faces its own pressures. As a manufacturer, our days fill with precise batch preparations, raw material checks, and quality control processes that leave little room for guesswork. Among the portfolio, PRIMENE Amine / Fuel Additive JM-T stands out as a product we’ve tailored through decades of hands-on development, pilot reactor tinkering, and feedback from both field engineers and refinery technicians.
In our operation, the central aim has never been a generic fuel amine that simply blends into the commodity pile. PRIMENE Amine JM-T holds its reputation for a distinct molecular structure—centering on highly branched C16-C22 primary aliphatic amines—which confers physical and chemical properties that benefit both small-scale blending rooms and the largest fuel depots. Our process refines and consolidates the fractionation and synthesis steps to keep the chain distribution tightly biased toward branched, higher molecular weight amines.
Anyone who has stood above a blending tank in summer humidity understands how fuel additive choice changes everything from gumming in valves to stability over storage cycles. PRIMENE Amine JM-T lends itself to distillate stability, helping inhibit acid-catalyzed corrosion. Refiners and locomotive maintenance teams have told us that their switch to JM-T led to visible reduction of corrosion inside tanks and lines, especially in storage conditions with aggressive sulfur or acid numbers.
The advantage tracks back to the chemical backbone our technicians monitor during every QA cycle. JM-T’s molecular geometry gives it a high level of amine functionality per mole, meaning better neutralization of acidic species already at lower additive treat rates. Trucks, marine fuels, and backup generators see extended service intervals, and the acid level in used samples drawn at months’ end testifies to its effectiveness. These stories line up with our own lab results, which show JM-T outperforming linear alkylamines by a notable margin in both neutralization power and volatility restraint.
Fuel systems don't remain static. Atmospheric water seeps in, contamination finds its way into stored stock, and heavier crudes complicate fuel blends matrix. JM-T integrates with a variety of hydrocarbon-based systems, whether you’re making diesel, marine distillates, or handling specialty industrial blends. Its branched amine backbone resists volatilization and degradation, allowing operators to stretch tank cycles and reduce additive top-up frequency. These capabilities matter when working with big tanks under fluctuating climate, and they keep refueling systems reliable without constant hands-on adjustment.
Our R&D teams have said it more than once: paper performance means nothing without on-site proof. Years of deployment inside fuel depots, bulk storage tanks, and distribution terminals build up real evidence, not just data sheets. Operators describe how PRIMENE JM-T dissolves readily into hydrocarbons, avoiding phase separation or clouding seen with more hydrophilic amines. Our experience shows JM-T remains mobile in cold-flow conditions, so there’s no risk of plugging additive lines when the temperature drops—a problem that’s cost many fuelers thousands in interrupted supply and downstream maintenance calls.
Where standard amines may break down or strip off into vapor phase during high-temperature operation or under vapor-liquid equilibrium, the JM-T structure clings to its target phase. This stops premature vent losses during transfer and ensures the additive reaches its intended endpoint. Engineers worried about volatility appreciate that JM-T’s heavier, more branched molecular form holds onto carbon chain, which keeps the product behaving consistently in extended laydown storage. Out in the terminal or rail yard, that sort of practical reliability counts for far more than a laboratory note.
We see PRIMENE JM-T function most effectively in acid-scavenging roles inside middle distillate blending, marine bunker fuel conditioning, and in specialty aviation fuel blends where low residue and minimal volatility loss matter. Aviation ground support teams in particular comment on its role reducing acid number in jet-A storages after extended weathering, lowering corrosion rates in tanks that typically would need maintenance inside a few quarters.
Higher-performing fuel amines cut unplanned downtime and trim costs in regular maintenance budgets. For asset managers overseeing thousands of kilometers of storage and pipeline, the measurable drop in acid-induced component wear pays direct dividends. This isn’t just theory; those of us in chemical manufacturing juggle end-user requests, regulatory test lab audits, and regular customer site visits. Problems float to the top fast when a batch underperforms, and nothing sticks in the executive report more than “rework due to additive failure.” PRIMENE JM-T takes such outcomes off the table with a predictable, well-characterized response profile.
Comparing fuel additives, it becomes clear that structural differences drive system results. The branched, high-carbon amines in PRIMENE JM-T bring more bulk and surface-active features into play during use than straight-chain or less substituted cousins. In real blending, that translates to faster acid neutralization and strong interfacial persistence in the fuel phase, even when batch-contaminant surges or weather cycles hit the supply chain.
In our blending facilities and customer trials, we regularly test JM-T head-to-head with alternative amines found in the open market. Linear dodecyl or alkylamines tend to offer lower phase stability and reduced performance in colder storage, as retrieved samples sometimes reveal haze or phase slippage. By contrast, our test batches with JM-T produce clear, stable blends with consistently low acid numbers after weeks at ambient or refrigerated hold. In neutralization titration tests, JM-T hits the desired acid absorption point at much lower additive dosage. The difference is quantifiable and repeatable.
Longevity also counts for end users who handle large-scale storages. PRIMENE JM-T’s resistance to oxidation means slow degradation over time, even when oils or fuels sit in partially vented tanks. Our lab archivists can trace batches held for over six months in simulated storage, checking for breakdown by-products—JM-T generates fewer, and fuel samples drawn afterward require less clean-up before reuse.
Big refiners tell us their upstream, low-tier amine suppliers ship products with broader residual fractions and more off-cut straight chains—those won’t perform as well during times of batch variability or challenging blendstock conditions. Our own front-end production focuses on fingerprinting the amine fractions, routinely rejecting off-spec output and rerouting to secondary end uses. This commitment locks down batch quality, so nobody faces a surprise when months-old product comes out of a warehouse for re-blending.
Fuel blenders face mounting compliance rules for amines, both regional and international. PRIMENE JM-T production observes strict tracking protocols for both process waste and emission controls, which reduces environmental impact for any downstream user. Our effluent and vapor controls are part of the reason major downstream partners keep us on their short list. PRIMENE JM-T contains no regulated secondary amines, and routine screening under standard test protocols returns negative readings for nitrosamine precursors, giving more confidence for producers focused on occupational and end-user safety.
Working under ISO 9001 certification, our team conducts both in-process and final shipment checks. Our logs and retention samples stretch back years, and customers often audit our records. We make sure batches run to the same specs, minimizing variable content that could flag red in compliance audits or trigger excess amine discharge penalties for fuel blenders. The tighter control loop doesn’t just serve regulators; it keeps shipment and storage records clean, so no one faces documentation troubles months after a blend leaves our gate.
Fuel system managers today expect more than a “commodity” label. With the rise in legislative oversight—especially around sulfur, nitrogen, and amine residuals—JM-T adapts easily into greener and more tightly governed fuel programs. Operators never want to chase down a blend batch rendered non-compliant by a supplier error, and those calls come straight to our office if a problem arises. Consistent manufacture and continuous improvement keep JM-T in line with shifting require-ments.
Real-world results drive continuous development. Our chemists keep a detailed feedback loop running with both technical support leads and long-term clients. Reports from users facing winter blending challenges or surges in asphaltene content result in direct formulation or process tweaks.
During one particularly harsh winter season, diesel blenders in the north flagged a clouding issue with competitor products used in secondary containment tanks. Our laboratory blended custom test runs of PRIMENE JM-T with that season’s crude sources, then field-trialed it alongside both the incumbent and a generic amine control. The blend with JM-T stayed clear and passed all acid stability tests, keeping the tanks online through unseasonal temperature swings. That batch feedback now informs routine production, extending the cold-weather performance window for all buyers.
Operators overseeing military and locomotive fuel points have also shared acid attack patterns seen in long-term bunkered fuel. We set up accelerated corrosion cells and challenged JM-T versus alternative amines across the typical storage timeline. A clear trend emerged: tanks dosed with JM-T exhibited minimal rust and corrosion during inspection, even after months at variable humidity.
As a manufacturer, these insights get baked into future process adjustments—whether that means shift in synthetic precursor blend, small reactor temperature tweaks, or altered distillation endpoints. Our plant teams receive regular updates on field complaints and successes, making the improvement cycle far more than a quarterly audit formality.
Experience as both producer and bulk shipper guides our handling recommendations. PRIMENE JM-T’s flash point and vapor pressure allow for safe, controlled movement even during hot season rail or cargo shipments. Storage in standard steel or lined drums and ISO containers holds up during months of turnover, and no phase slippage or residue buildup appears if drums stay closed and out of active sunlight.
Some competing amines bring handling headaches: vapor losses, stickiness, and fouling on gaskets or pump seals. JM-T’s engineered blend delivers manageable, less aggressive vapor pressure, translating to smoother blending and far less risk of vent stack contamination or lost product during tank transfer. Truck bay technicians have recounted switching over to JM-T specifically to reduce pungent vapor exposure and caking on additive feed lines. We log each such incident into internal feedback systems, actively cross-checking it with production parameters and tweaking where justified.
Seasoned procurement teams know how to compare true “total cost of ownership.” With batch-consistent stability, low failure or loss rates, and precise neutralization titration curves, PRIMENE JM-T trims hidden costs that generic amine buyers often overlook. Unused, properly stored stock continues to run at target specification for extended periods, matched only by the tightest fraction blends among international producers.
Maintenance planners can shift the inventory rotation window. Repeated QA testing of retained drums confirms little batch drift over a year, so long as main handling guidance is followed. Lift the drum, open it, blend, and close it back up—the difference appears in both lab and field logs alike.
Producing PRIMENE Amine JM-T involves continuous investment in plant capacity, raw material purchasing rigor, and traceability. Every shift logs batch data in real-time production rooms, and plant managers keep a hands-on approach to raw material sourcing. We don’t outsource key synthesis steps, which keeps the product’s fingerprint sharply defined and ensures direct accountability from the base reaction through storage, drumming, and dispatch.
We regularly invite key clients and independent auditors onto the floor to review documentation and observe production. No third-party repackaging happens during shipment runout, and every shipped drum or container comes with unique batch records. Our teams realize additive users need “root cause” traceability if an issue ever arises. Many users report bad encounters with anonymous bulk drums or additive downgrades by commodity handlers. We’ve set a hard line inside our plant to maintain origin integrity, with vertical control over both material sourcing and synthesis flow.
Niche, field-driven chemistry needs a level of transparency standard commodity trades rarely offer. Users send our factory technical support photos of tank interiors and acid attack traces. Instead of relying on endless call transfers, they receive direct answers from team members involved in either batch preparation or follow-up analysis. This culture shapes the way JM-T heads to market—not only as a high-functionality amine additive but as a solution supported by our entire manufacturing force.
As fuel chemistry evolves—pushed by new biofuel mandates, shifting sulfur content rules, and ongoing pressure to extend storage cycles—additive needs keep shifting too. Our R&D staff invests real time in simulating next-generation blendstocks and running accelerated aging trials on emerging bio- and e-fuel bases. PRIMENE JM-T answers not just today’s acid neutralization challenge but also positions as a stable, field-validated answer for new, unconventional fuel blends.
Upcoming distribution points in harsher or more remote settings continue to push amine requirements up. Design and production methods for JM-T have already moved ahead to tighter batch tolerances and smarter raw fraction selection. Technical and supply chain teams share data continuously, ensuring no member of the user chain gets left working with undercharacterized or inconsistent additive.
The stakes grow as compliance margins shrink and asset lifecycles stretch further. PRIMENE Amine JM-T’s manufacturing background, field data record, and regular customer engagement set it apart in a world of shelf-generic options. From the control room view, every step—feedstock testing, reactor oversight, fraction separation, drum filling, and field deployment—connects back to the base principle that chemical consistency outlasts flavor-of-the-month market moves.
On every plant tour, we remind new operators and partners: chemistry without accountability does not build trust in mission-critical systems. PRIMENE Amine JM-T continues to earn its reputation not by slogans or claims but by bearing out in lab logs, field samples, and user experience records. This is chemical manufacturing grounded in proof, history, and direct feedback from every corner of the fuel supply chain.