| HS Code | 294922 |
| Product Name | ROBOND Water-Borne Adhesive FD-07N |
| Type | Water-borne adhesive |
| Appearance | Milky white liquid |
| Solid Content | 47-49% |
| Ph Value | 6.0-8.0 |
| Viscosity | 200-1000 mPa·s (at 25°C) |
| Density | 1.02-1.05 g/cm³ |
| Application Method | Roller, brush, or spray |
| Drying Time | 10-20 minutes (at room temperature) |
| Storage Temperature | 5-35°C |
| Shelf Life | 6 months (unopened, at recommended storage conditions) |
| Main Uses | Bonding textile and foam materials |
| Solvent Type | Water |
| Flammability | Non-flammable |
| Clean Up | Water when wet |
As an accredited ROBOND Water-Borne Adhesive FD-07N factory, we enforce strict quality protocols—every batch undergoes rigorous testing to ensure consistent efficacy and safety standards.
| Packing | ROBOND Water-Borne Adhesive FD-07N is packaged in a 200 kg blue HDPE drum with secure lid and product labeling. |
| Container Loading (20′ FCL) | 20′ FCL container loading for ROBOND Water-Borne Adhesive FD-07N typically accommodates around 16-18 tons, securely packed in drums or pails. |
| Shipping | ROBOND Water-Borne Adhesive FD-07N is shipped in secure, tightly sealed drums or pails to prevent leakage. Containers are clearly labeled with relevant safety and handling information. The product should be transported in upright position, protected from freezing, extreme heat, and direct sunlight to maintain its quality and effectiveness during shipping. |
| Storage | ROBOND Water-Borne Adhesive FD-07N should be stored in tightly sealed original containers, in a cool, dry, and well-ventilated area away from direct sunlight and extreme temperatures. Protect from freezing. Avoid contamination with incompatible materials. Keep containers upright and prevent damage to packaging to ensure product integrity. Store at 5–35°C (41–95°F) and follow all manufacturer guidelines for safe storage. |
| Shelf Life | ROBOND Water-Borne Adhesive FD-07N has a shelf life of 12 months when stored unopened in a cool, dry place. |
ROBOND Water-Borne Adhesive FD-07N delivers dependable bonding power for specialized assembly and conversion processes across multiple sectors. As a chemical raw material manufacturer, we support industrial users who require stable formulations, consistent processability, and compliance with international standards. Find below our in-depth breakdown of practical downstream application paths as verified in real-world manufacturing contexts.
Our adhesive achieves secure, high-clarity lamination of multi-layer flexible films used in food packaging. Process engineers use it to bond substrates such as PET, BOPP, and foil without introducing solvent residues. Its formulation passes migration and sensory tests required for safe food contact, and users optimize the mix based on film types and machinery speed. The cured lamination survives downstream slitting, dying, and bag-making under mass production conditions common in food-grade packaging plants.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
This adhesive integrates into high-speed manufacturing of labels and pressure-sensitive tapes for logistics, consumer products, and specialty applications. The water-based formulation delivers low VOC emission, quick drying, and consistent peel adhesion on various facestocks and liners. Its compatibility with printing inks and ability to maintain clarity after die-cutting makes it valuable for converters seeking cost-efficient, environmentally-preferable bonding.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Our water-borne technology supports carton converters seeking environmentally-compliant adhesives for laminating paper and board substrates. Typical users require stable application viscosity, short drying times, and safe handling for staff under busy plant conditions. Major folding carton lines apply this adhesive to composite or multi-ply boards used in packaging for pharmaceuticals, cosmetics, and high-value retail items where visual clarity and delamination resistance are essential.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Our adhesive facilitates the assembly of laminated wood-based panels used in furniture and interior decorative products. Production lines apply it for adhering paper, PET film, or veneer to MDF or particleboard cores. Its low formaldehyde and VOC content responds to increasingly strict regulatory environments. Industrial presses achieve required bond uniformity, scratch resistance, and moisture durability demanded by contract furniture makers and panel fabricators.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Leading tier-1 automotive suppliers use our adhesive in the production of soft interior trim—such as door panels, headliners, and acoustic insulation—where bonding between textile, foam, and polymer films must withstand temperature and humidity cycling. Its water-based polymer blend aligns with OEM directives to lower emissions and minimize cabin VOCs. Line performance remains stable in robotic spray or roll-coating systems configured for bulk automobile part runs.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Manufacturers in the footwear sector apply this adhesive in lamination and construction of multi-layered shoes and sports gear. The product bonds mesh, split leather, nonwoven, and synthetic overlays while meeting factory EHS demands for solvent reduction. Technicians tailor the application viscosity and laydown volume to match specific foam densities and lining materials through high-throughput batch or continuous lines in modern shoe production.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Competitive ROBOND Water-Borne Adhesive FD-07N prices that fit your budget—flexible terms and customized quotes for every order.
For samples, pricing, or more information, please contact us at +8615365186327 or mail to sales3@ascent-chem.com.
We will respond to you as soon as possible.
Tel: +8615365186327
Email: sales3@ascent-chem.com
Flexible payment, competitive price, premium service - Inquire now!
There’s a unique perspective that comes from standing at the mixing line and watching ingredients come together to meet the demands of ever-changing packaging requirements. Manufactured in facilities that are built for precision and repeatability, ROBOND Water-Borne Adhesive FD-07N represents the progress of decades spent in the development and improvement of water-based adhesive systems for flexible packaging. We have worked on the smallest details because our own operations, our customers’ lines, and global environmental responsibility demand it.
FD-07N is not a generic product—its formulation has evolved after direct input from packaging converters and long relationships across the supply chain. FD-07N delivers what operators and quality managers have asked for: consistent wet tack, reduced foaming, and forgiving runnability on high-speed lamination machines. This adhesive finds regular use with structures such as BOPP/CPP, PET/VMCPP, and nylon-based laminates. We tuned the viscosity and solids content to slot neatly into the production window needed for snack, dry goods, and medical product pouches, supporting common application weights while avoiding blocking or starved edges.
Operators at lamination plants often face downtime from excessive foaming, drips, or gun plugging. FD-07N removes a large part of this daily frustration. Our production engineers worked through batch after batch to eliminate micro-foam issues, so lines can keep moving and plant floors stay safe. Surfactant blends were closely reviewed for easy cleanup, so overnight shutdowns or job changes become less trouble. We also validated FD-07N on both traditional gravure and modern semi-flexo coaters, and have observed stable laydown even under challenging conditions—high humidity, rapid restarts, or film gauge variation.
With FD-07N, the solids content and application viscosity remain steady from the first load through the last. Our technicians track this in every batch. Consistency here helps crews avoid machine recalibration and cuts film waste. Final items laminated with ROBOND FD-07N resist delamination and wrinkling after curing, which is critical for shipping performance and consumer confidence in the finished pouch or wrapper. From day jobs to night shifts, plant leads report solid results with less adhesive streaking and more reliable bond strength measurement.
The shift away from solvent adhesives comes from both environmental pressures and line operator feedback. VOC regulations are tightening. Customers also want a safer shop floor, and the switch to FD-07N means no hazardous emissions that need incineration or expensive capture systems. By working directly with the people handling, mixing, and running these adhesives, we see firsthand that air quality improves and handling risks are lower versus older solvent-based stocks.
Many alternatives marketed as water-based often include higher ammonia, which raises odor and can interact with sensitive film surfaces. FD-07N uses a low-odor base, and batches are held to strict specs for base chemicals to stay in line with converter feedback about workplace air quality and worker comfort. Where other water-borne adhesives can be fussy about drying—sometimes needing higher oven temps—FD-07N offers good adhesion at moderate drying, helping save energy and avoiding heat damage to delicate films.
Direct feedback loops guide our development, not just market surveys. Several clients regularly report that FD-07N holds the edge in clean roll unwind and laydown for jobs calling for thin gauge films or multi-layered webs. This matters for converters aiming for light weighting without losing bond performance. Inspectors, who test delamination strength and appearance daily, note fewer complaints about hazing or trapped bubbles in the adhesive layer compared to competing formulas. Finished bags using FD-07N pass retort testing and water vapor migration checks at a high pass rate, which protects our customers’ downstream brand quality.
Our own manufacturing and customer trials focus not only on cost per roll but also on fill weight accuracy and operator productivity. Coating with FD-07N does not require revamping existing lines. Our technical team commissioned dozens of runs with application temperatures in the standard range for water-borne adhesives, and results held steady for both clear and metallized substrates. Cleaning between changeovers uses typical water flushes, no extra detergents or waste management. Press operators mention decreased foam buildup in the recirculating tanks, so monthly records now show less downtime for tank cleanout compared to earlier generations of adhesive.
Material loss at line start is always a pain point. FD-07N lays down well with fewer edge trims needed because of the stable body and precisely set rheology. When changing job speeds or facing an interruption, resume quality holds up with lower risk of edge lift or bond voids, which cost money and strain schedules. For customers running shorter batch jobs, this has turned into fewer roll scrappages and more finished product per unit of adhesive.
We built FD-07N with a water-borne polyurethane acrylic backbone, avoiding complex reactive crosslinking agents that can trigger side reactions or introduce handling headaches. Our in-process controls at the plant check molecular weight and dispersion fineness, so every vessel leaves with a fingerprint of assurance that translates to end-user performance. The low free monomer level also shows up in regulatory compliance—a growing concern as more large buyers demand clarity on indirect additives for food-contact uses.
Technically, bond formation is strong on both primed and untreated films, which expands the range converters can handle. For medical and personal care packaging, this flexibility means fewer changeover challenges and less need for in-line surface treatments. Batch records and QC tests in our labs show repeatable bond strength numbers even on uneven roll stock, giving customers more leeway in film sourcing.
Using FD-07N lets converters deliver on environmental claims that big retailers are now demanding. Water-borne adhesives, especially those with robust wet and dry performance, fit with larger brand moves toward compostable and recyclable flexible packaging. Our own production process emits minimal VOCs, and waste from rinse water has tested below local discharge limits in repeat third-party audits. Several customers highlight reduced regulatory paperwork after switching to FD-07N, simplifying both their hazard assessments and reporting obligations.
In the plant, shifts that once took extra PPE for solvent exposure can switch to more comfortable protective routines, which has fed into lower reported near-miss incidents. Customers indicate easier staff training and reduced turnover among line workers, which adds further efficiency gains on top of environmental savings.
Converters using FD-07N have run it on both legacy and new coater/laminator lines. It works with both high and moderate line speeds, covering runs from as low as 100m/min up to over 300m/min without sacrifice in coat quality. Several of our largest customers transitioned from thermal or moisture-cure adhesives and returned to reorder FD-07N for its process flexibility. Adhesive pickup rolls cleaned easier, nipping out sources of ghosting and transfer. Teams running repeated shut/start cycles saw that FD-07N recovered well, avoiding defect tracking seen with more brittle or rigid adhesives.
Direct observations from field engineers support that FD-07N does not require recalibration of established drying systems. This cuts out capital expense and helps customers adapt more rapidly. For laminators working with both food-contact and industrial packaging, this means less risk of cross-contamination or unpredictable performance on side-by-side runs.
Every batch of FD-07N is tracked from raw material intake through tank filling. We test incoming monomers, check pH at multiple points, and run both lab dry-down and bond strength checks. By handling the entire blending operation in-house, we address lot-to-lot variance before product ever leaves the plant. Customers with fast-paced turnaround appreciate this, since production schedules often leave little room for off-grade shipments or last-minute reformulation.
Feedback shows that users can maintain print clarity and film transparency after FD-07N lamination. This appeals to brands pushing high-impact shelf appeal or crisp graphics on their final packs. Quality complaints about color shift or wrinkling dropped during side-by-side testing with legacy adhesives. This is not a lucky accident. Our internal quality systems are built on line-side metrics that reflect what converters measure, from peel force to haze and visual checklists.
Our engineers have spent years on customer floors, paying attention to the real-world needs of press operators during long shift cycles. By gathering samples directly from the exhaust, monitoring temperature trends at the coater deck, and reviewing yield numbers beside shift supervisors, we refined FD-07N’s formulation to cut out friction points. After-sales technical support draws from this field experience, offering fast troubleshooting and usable advice instead of generic support literature.
Running FD-07N means less wasted time tracking small variables and more focus on throughput. Tech teams appreciate stable pH and shelf life, which leads to fewer tank flushes during the week. In-plant trials often show increased productive uptime by reducing changeover time and minimizing adhesive-related rejects.
Brands and packers need finished packages that survive travel, storage, and temperature swings without failures or visual defects. FD-07N bridges performance and safety needs. For packers concerned with migration or off-odor, intrinsic low-volatile chemistry keeps flavors and aromas in, not leaching out. Several brand owners have documented that their end packs reach further distances with less loss from seal failure or contamination. This product allows converters to answer the tough questions from auditors on both regulatory compliance and supply chain traceability, since every batch is logged and cross-referenced from raw material through shipment.
Materials science does not stand still. Our approach treats FD-07N not as a finished story, but as an evolving platform for better packaging solutions. Plant engineers review performance logs and customer feedback each quarter to find out where improvements show up on the line or in downstream performance. If a new film or packaging law pushes requirements tighter, product modification can follow without extensive downtime or substitute sourcing. This reduces headaches for procurement and production teams alike.
Close cooperation with film suppliers and packaging engineers means new film grades or surface treatments get trialed with FD-07N early, so any implications for line settings or adhesive coverage are discovered and solved before reaching large-scale commercial runs. We have updated anti-foam and wetting agent packages in response to customer field data, always balancing the need for quick changeover with overall bond strength and clarity.
Unlike companies that only sell or distribute, we see every stage of adhesive production—including the messy, costly, and frustrating parts. Our plant teams have seen what can go wrong, from batch gelation to foam overflows, and set up the controls and real-time support that matter on a busy floor. That experience gives our technical service team the ability to work alongside our customers, not just ship product and disappear. FD-07N reflects thousands of hours in formulation, QA, and production troubleshooting, all aimed at giving converters a product that holds up under real manufacturing pressure.
ROBOND Water-Borne Adhesive FD-07N stands for the practical, tested results that drive packaging lines. Consistent runnability, film compatibility, and ease of use recur across every customer audit and in our own records. Bond strength, clear print results, and reliable wetting—these are matters of daily work in busy manufacturing and converting plants. Regulations are shifting, consumer demands are rising, and the future brings new film grades and application challenges. The trust placed in our adhesive doesn’t come from claims or datasheets, but from steady, measured capability in real-world operation. We will keep responding to production feedback with the same hands-on attention we expect from our own partners.