Dow Inc

Products

ROMAX Oil Field Polymer 7030

    • Product Name: ROMAX Oil Field Polymer 7030
    • Chemical Name (IUPAC): Polyacrylamide
    • CAS No.: 9003-04-7
    • Chemical Formula: C3H5NaO2
    • Form/Physical State: White Granular Powder
    • Factroy Site: Yudu County, Ganzhou, Jiangxi, China
    • Price Inquiry: sales3@ascent-chem.com
    • Manufacturer: Dow Inc
    • CONTACT NOW
    VTB
    Specifications
    HS Code 717473
    Product Name ROMAX Oil Field Polymer 7030
    Appearance Free-flowing white powder
    Ionic Type Anionic
    Molecular Weight High
    Solubility Completely soluble in water
    Ph Of 1 Percent Solution 6.0 - 8.0
    Bulk Density 0.65 - 0.85 g/cm3
    Degree Of Hydrolysis 25% - 30%
    Main Application Enhanced oil recovery (EOR)
    Storage Temperature 5°C - 30°C
    Moisture Content <10%
    Recommended Dosage 500 - 2000 ppm
    Packaging 25 kg bags

    As an accredited ROMAX Oil Field Polymer 7030 factory, we enforce strict quality protocols—every batch undergoes rigorous testing to ensure consistent efficacy and safety standards.

    Packing & Storage
    Packing ROMAX Oil Field Polymer 7030 is typically packaged in 25 kg multi-layered paper bags with inner plastic lining for moisture protection.
    Container Loading (20′ FCL) Container Loading (20′ FCL): Approximately 16-18 metric tons of ROMAX Oil Field Polymer 7030, packed in 25kg bags on pallets.
    Shipping ROMAX Oil Field Polymer 7030 is shipped in sealed, high-density polyethylene (HDPE) drums or intermediate bulk containers (IBCs) to prevent contamination and moisture ingress. Containers are clearly labeled and securely fastened for safe transit. Store and transport in a cool, dry area, away from direct sunlight and incompatible materials.
    Storage ROMAX Oil Field Polymer 7030 should be stored in tightly sealed original containers, kept in a cool, dry, and well-ventilated area away from direct sunlight, heat sources, and incompatible materials. The storage area should be free from moisture to prevent product degradation. Ensure proper labeling and secondary containment to minimize spill risks, and follow all local regulations for chemical storage.
    Shelf Life ROMAX Oil Field Polymer 7030 has a shelf life of 12 months when stored in unopened original containers under cool, dry conditions.
    Application of ROMAX Oil Field Polymer 7030

    Applications of ROMAX Oil Field Polymer 7030 in Industrial Manufacturing

    ROMAX Oil Field Polymer 7030 serves as a key component in a range of critical oil and gas field operations. Below we detail concrete industrial applications supported by real-world standards, optimized ratios, practical process integration, and the end-use products manufactured by our global downstream partners.

    1. Enhanced Oil Recovery in Water Flooding Operations

    Operators commonly deploy this polymer as a viscosifier to improve sweep efficiency in petroleum reservoirs during secondary recovery. Its consistent performance in brine environments enables users to maintain mobility control and reduce fingering, significantly increasing the extraction of residual oil in mature wells.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    2. Drilling Fluids Additive for Shale Inhibition

    This material acts as a key additive in water-based drilling muds, reducing clay swelling and preventing dispersion of reactive shales. Drilling engineers count on its capacity to stabilize borehole walls and maintain low fluid loss, which directly impacts drilling speed, bit life, and borehole integrity in water-sensitive formations.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    3. Fracturing Fluid Thickener for Hydraulic Stimulation

    Downstream service companies use the polymer as a thickening agent in hydraulic fracturing fluids for unconventional resource development. Its function includes sand suspension, proppant transport, and controlling fluid leak-off, which ensures improved hydraulically-induced fracture width and enables effective proppant placement in tight formations such as shale and sandstone resources.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    4. Cementing Additive for Oil Well Construction

    In primary and remedial cementing operations, this polymer acts as a fluid-loss control additive, reducing API fluid loss and improving cement slurry stability. Its inclusion optimizes zonal isolation, prevents gas and water channeling, and assures well integrity even in challenging high-temperature wells and unconsolidated formations.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    5. Brine Clarification in Produced Water Treatment

    The polymer assists oilfield operators in clarifying produced water streams by aggregating suspended solids, oil droplets, and colloidal particles, supporting regulatory-compliant reinjection or safe discharge. With a high molecular weight and tailored charge density, it ensures rapid settlement and clear filtrate output—even in high TDS environments—minimizing downtime in water management systems.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    Free Quote

    Competitive ROMAX Oil Field Polymer 7030 prices that fit your budget—flexible terms and customized quotes for every order.

    For samples, pricing, or more information, please contact us at +8615365186327 or mail to sales3@ascent-chem.com.

    We will respond to you as soon as possible.

    Tel: +8615365186327

    Email: sales3@ascent-chem.com

    Inquiry

    Get Free Quote of Dow Inc

    Flexible payment, competitive price, premium service - Inquire now!

    Certification & Compliance
    More Introduction

    ROMAX Oil Field Polymer 7030: Meeting the Real-World Challenges of Oil Production

    Hard Facts: Why Oilfield Polymers Matter

    Veterans in the oilfield know the industry constantly presses up against new boundaries. Deeper wells below the salt, heavier crudes, and fields wrestled by water-driven declines in output. You can’t answer these kinds of challenges with generic chemical blends. It takes resilience both in the lab and onsite to design solutions capable of working through shifting field realities. One constant always comes up: reliable polymers that do the heavy lifting for water control, enhanced recovery, and drilling efficiency.

    Our shop doesn’t just react to market buzzwords or sell what’s convenient. Over decades, we’ve seen what works in Baker, what needs improvement in Daqing, and what falls flat in the Permian – because our support engineers live through each run-off, sand cut, and tubing scale right beside our customers. Each polymer we produce tells a story that comes from deep in the wellbore, not a catalog index.

    Inside ROMAX Oil Field Polymer 7030

    ROMAX Oil Field Polymer 7030 started out as a response to very specific trials in unconsolidated sand formations. Crews kept coming to us with the same questions about how to get consistent mobility control and sand stabilization with cost pressure pushing every load. We went through hundreds of small-batch syntheses and field-driven tweaks before hitting the final formulation: a copolymer blend built from high-purity acrylamide and a streamlined co-monomer package.

    The 7030 model number isn’t just a random pick from the product shelf. The ratio means we leaned heavy on the primary chain to drive viscosity growth, while the modifier lets operators tune gel strength without inviting biological fouling or wasteful breakdown products. We built this thinking about crews in locations where water quality varies from week to week – thin salty loads in winter, surface water cut with calcium spikes in late summer, and everything between.

    Talk to anyone who’s wrestled with other generic oilfield polymers and you’ll hear the same complaints: unreliable hydration, batch inconsistency, and powder caking that leads to dosing headaches and unpredictable loading at the mix tank. ROMAX 7030 comes as free-flowing microbeads, manufactured under low-moisture atmospheric controls that give it the ability to stay pourable through all typical storage cycles. You don't see chunks or dry clumps, and moisture readings from batch to batch run tight within our guaranteed spec. It pours smooth even in humid Mandan yards in July.

    Performance Where the Well Demands It

    Let’s not pretend every well calls for the same polymer approach. High molecular weight brings viscosity for sweep, but excessive chain length turns into pumping nightmares in dense brine. We kept ROMAX 7030’s average molecular weight in the optimal window for mobile EOR (enhanced oil recovery) jobs, high-rate injection sweeps, shallow well sand control, and even as a base for blending crosslinked gel systems. In actual pumping trials, we saw pressure smoothing and strong permeability modification, leading to longer floodfronts and improved oil cut without early breakdown or rapid filtercake loss.

    Comparing it to old-school pure polyacrylamide, ROMAX 7030 stays more stable when mixed with hard brine, keeping solution clear rather than dropping out or producing persistent haze. In low-salinity injection, it still offers the high viscosity profile, helping operators push more oil instead of mainly moving water. The unique side chain ledger isn’t just playing a numbers game: it actively deters microbial growth, especially sulfate reducers that love to eat through lesser-quality polymers. This reduces downtime for the operators because sulfate scale and biogenic sulfide odors stay low.

    During hydraulic fracturing and profile modification, field logs repeatedly showed that our polymer hydrated within normal agitation cycles, even at low concentrations, giving the field foremen flexibility to dial in viscosity without waiting out long mix times or worrying about incomplete hydration streaks in the blend tanks. This helps avoid the “slug and pray” approach many old hands took with lower-grade materials – our teams saw clean, continuous flow straight off the batch mix, even on cold mornings when operators in Texas or Alberta watch their tanks crust up.

    Mixability: Getting It Right in the Field

    Operators can’t afford delays caused by sluggish mixing or gummed-up feeders. ROMAX 7030’s granule sizing calibrates with the intake needs of most standard dry-polymer eductor systems on the market. In practical terms, you load the hopper, and the granules fall evenly. The hydration curve follows what’s posted in our lab-backed charts. Users aren't forced to over-feed to compensate for poor yield, which saves dollars over longer runs.

    Batch records from injection campaigns over the last two years show that operators using ROMAX 7030 consistently pulled 85-98 percent yield from the raw material, a number that’s steamed past results from older SKUs and blends padded with inert fillers. Many crews told us they do less filter bag maintenance because the polymer isn’t dropping fine sand or filler during mixing. Consistency saves everyone time, all the way from the initial load to the far end of the manifold.

    Reliability During Storage and Transport

    ROMAX 7030 faces real-life heat swings during storage in the yard and in sea containers. We designed drum packaging that stands up to high humidity and temperature cycles, blocking in-place caking or absorption that makes some inferior polymers unusable after just a season in less-than-ideal warehouses. Summer months rolled out easy—a sample batch shipped by truck across Texas showed stable flowable product even after direct container exposure to above 40°C days followed by overnight cool-downs.

    During internal shelf-life tracking, our QA teams pulled archived drums after 18 months of standard warehouse storage and found moisture readings and solution viscosity sat at original lot values. That means no surprise clumping out in the field, and no guessing at yield numbers. Unlike polymers with bone-dry particle surfaces (which soak up atmospheric water and clump), ROMAX 7030 holds a narrow-bound internal moisture balance, so it handles changes in warehouse or on-deck conditions with no drop in performance.

    Polymers with too much dust content produce health and safety headaches. Our process keeps dust generation to a minimum without putting hazardous anti-dusting agents into the product, which means safety standards are met naturally at all handling stages.

    Standing Out: Where ROMAX 7030 Sets Itself Apart

    ROMAX 7030 sets itself apart from the slurry blends and bulk polymer cuts crowding the market. Modern oilfields face diverse conditions, so a one-size-fits-all approach fails fast. Many “universal” products feature trade-off compromises: high filler for low cost, ignored microbead caking, or poor compatibility with hard water. We saw fluidity and performance issues with several generic brands. Flaky material and unpredictable viscosities cost field time, money, and productivity loss.

    Instead of chasing margins through shortcuts, we focused on tight granulation control, high-purity monomers, and avoiding any unnecessary additive packs that don’t demonstrate field performance. Our controls reach into each production stage: batch hydration curves, detailed molecular weight targeting, and iron-trace minimization that keeps the polymer free from unwanted reactivity with field brines.

    In addition to stability, ROMAX 7030 integrates well in both freshwater and saline brine systems. Many offshore and arid-region projects benefit from the option to blend polymer into low-quality source water rather than relying on expensive desalinated supply. This holds value in tight margin environments, where transport and treatment costs often dictate project feasibility.

    Applications That Reach Beyond the Label

    ROMAX 7030 isn’t limited to any single oilfield trick. It handles slug dosing in water shutoff, mobility control in heterogenous sand lenses, sweep improvement in pattern floods, and fines trapping near critical water-producers. Operators running pilot EOR cycles in depleted carbonates received positive feedback on well drawdown stabilization and decreased produced water cut after trialing our 7030 in mix waters with high hardness and scaling risk.

    Drilling fluids benefit from this formulation, especially in horizontal or extended-reach zones, where carrying sand and cuttings to surface calls for polymers that don’t break down under shear. Operators reported more stable rheology without excessive drag-rise, meaning rotary torque stayed in line while carrying sand past curve sections.

    Some customers also blend ROMAX 7030 as a base polymer for crosslinked gels—used for proppant carry or plugging troublesome thief zones. The consistency of particle size and hydration supports predictable gel composition and rapid activation with common crosslinkers such as chromium acetate or borates.

    On-the-Ground Learning: Lessons from the Field

    Our field techs make weekly runs to customer sites. They don’t just drop off drums and walk away. They listen as crews explain what works in their tanks, what clogs their lines, and what throws off their downstream water treatment. Those stories come back to our manufacturing plant and feed adjustments. Late last year, a Gulf operator flagged minor filter plugging during a brine spike event. We pulled several drums, ran a review, and dialed in a new surface wetting protocol to push those filter rates back into spec. A month later, the operator reported clear mixes with no filterback complaints.

    A common challenge is water chemistry on location. In some fields, surface water swings between soft rainy-season influx and high-salinity drought-induced concentrations. ROMAX 7030 tolerates these swings, giving consistent viscosity and flow, rather than turning to sludge or letting viscosity fade out in hard brines. Crews keep chemical logs that match up with our lab’s own hydration standards, and our support teams keep close tabs on those results. If a fix is needed, advice flows both ways.

    On a North Dakota pilot, our field partners worked with a mixed brine source where calcium would usually destroy viscosity in cheaper polymer blends. After moving to ROMAX 7030, viscosity stayed up over the whole pilot run, pumping rates held, and recovery factors rose. We saw no major filter plugging, so fluid moves through the formation without shutting down the producing intervals.

    Backed by Real Quality Controls, Not Buzzwords

    Quality for us means more than ticked-off lab tests. Each batch of ROMAX 7030 undergoes chain-length analysis and particle free-flow checks at multiple points on the line. If the hydration time or solution clarity drifts off the lot average, the run doesn’t make it past the QA gate. That keeps what goes out to the field in line with what the operators expect every time.

    Our QA group includes chemists who’ve spent years in producing basins. They know the way small faults can show up later as stuck lines or lost viscosity halfway through a high-pressure job. Feedback loops stay short between the customer site, QA group, and production engineering. Results get posted and discussed; learnings change the next production run.

    Cases crop up sometimes with blocked isolation valves or residues in downhole gear after service companies try running polymer blends from commodity brokers that cut costs with low-end fillers or poorly washed granules. In contrast, ROMAX 7030, with its cleaned and filtered base, reduces downhole residues, helps lines stay clear, and avoids added shutdowns for cleaning and remediation. These differences do not show up in code sheets at purchase, but they show in field reports and labor savings week after week.

    Supporting Smarter, Safer Field Operations

    The best field results come from combining reliable product with genuine technical backup. Our technical staff return operator calls whenever oddball mix issues or water compatibility problems arise. That hands-on support prevents downtime and salvage runs. Increasingly, oilfield clients face workforce shortages where one engineer covers three or four fields. They don’t need extra risk—just results that stick. Our polymer gives that confidence call after call.

    ROMAX 7030’s design limits any content that could trigger environmental headaches in spills or cleaning runoff. We use high-purity feedstocks and avoid cheap additives with questionable breakdown products. That aligns with field operators’ growing responsibility for site remediation and environmental compliance. Less problematic chemistry at the source translates to smaller bills on reclamation at the end of the well’s life.

    For companies focused on ESG outcomes, lower toxicity, and reduced emissions from reduced drum handling and dosing refinements, the impact stacks up across operations. ROMAX 7030’s consistency lets you plan and track polymer use for better reporting and leaner spend.

    Adapting to Field Realities

    ROMAX Oil Field Polymer 7030 reflects years of hard-earned lessons from real jobs in a thousand varied oil fields. Each decision, from a granular size tweak to an extra lab check, traces back to field stories that taught us what matters. As crude slates change, water qualities become trickier, and the industry pushes past former limits, our manufacturing and support teams keep updating specs and routines to keep our product competitive and reliable. We work on long timelines, not quick hits—looking for what keeps the industry advancing, well after the newest headline passes.

    Anyone can offer a polymer at a price. Delivering a product that stands up to weather, chemistry, and real-world crew handling—job after job—takes direct experience, stubborn persistence, and a willingness to listen, adjust, and improve. As a manufacturer, we bring that commitment to ROMAX Oil Field Polymer 7030, with each batch, each drum, and each call answered from the next field looking for oilfield polymer that keeps working when the pressure mounts.