| HS Code | 578567 |
| Product Name | ACUSOL Acrylic Polymer 445N |
| Chemical Type | Acrylic copolymer |
| Appearance | White liquid |
| Ionic Nature | Anionic |
| Solubility | Water soluble |
| Ph Range | 6.5 - 9.5 |
| Viscosity | 2000 - 4500 mPa·s at 25°C |
| Solid Content | 29 - 31% |
| Density | 1.05 g/cm³ at 25°C |
| Primary Function | Thickener/Dispersant |
| Stability | Stable in alkaline pH |
| Typical Usage Level | 0.2 - 2.0% |
As an accredited ACUSOL Acrylic Polymer (Thickener / Dispersant) 445N factory, we enforce strict quality protocols—every batch undergoes rigorous testing to ensure consistent efficacy and safety standards.
| Packing | ACUSOL Acrylic Polymer 445N is packaged in a 200 kg blue HDPE drum with a sealed lid and product labeling. |
| Container Loading (20′ FCL) | Container Loading (20′ FCL): Typically contains 16-18 metric tons of ACUSOL 445N (Acrylic Polymer) packed in 200 kg HDPE drums. |
| Shipping | ACUSOL Acrylic Polymer 445N is shipped in tightly sealed, high-density polyethylene (HDPE) drums or intermediate bulk containers (IBCs). Containers should be kept upright, protected from direct sunlight, and stored at temperatures between 0°C and 40°C. Ensure compliance with local regulations regarding chemical transport and provide appropriate hazard labeling during shipping. |
| Storage | ACUSOL Acrylic Polymer 445N should be stored in its original, tightly closed containers at 5–35°C, away from direct sunlight, heat, and incompatible materials. Store in a dry, well-ventilated area to prevent contamination and degradation. Protect from freezing and excessive heat. Ensure containers are properly labeled, and avoid exposure to moisture and extreme temperatures for optimal product stability. |
| Shelf Life | ACUSOL 445N Acrylic Polymer has a shelf life of 24 months when stored unopened in original containers at recommended conditions. |
ACUSOL Acrylic Polymer 445N serves as a high-performance thickener and dispersant designed for specialized formulation challenges across several demanding industrial markets. Our production expertise enables tailored solutions, from precise dosing to integration into critical downstream manufacturing steps. Below, we present distinct application scenarios with comprehensive technical and regulatory context.
Our polymer enhances rheology control and pigment dispersion in factory-scale waterborne coatings. Formulators use the material to maintain pigment stability, prevent settling, and achieve targeted viscosity independent of pH drift, even under high-shear mixing or after extended storage. The polymer’s salt tolerance supports production of corrosion-resistant primers and architectural topcoats. Integration at grind and let-down stages supports accurate viscosity setting and uniform application properties, crucial for automated spray lines.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
We supply this polymer as a rheology modifier and dispersant within household and institutional cleaning concentrates. It stabilizes particulate-containing formulations, provides clear gel structures, and enables the suspension of abrasive or functional additives in alkaline and neutral cleaners. The polymer resists hydrolysis and performs in surfactant-rich matrices exposed to repeated mechanical shear during production and packaging, delivering stable viscosity profiles from batch to end-user dilution.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Polymer 445N plays a critical role in textile pigment print paste and reactive dye thickening. Its rapid hydration and high electrolyte tolerance support sharp print definition and prevent migration or bleeding during high-speed screen printing. The polymer’s dispersant function enables even dye distribution, improving product consistency from lot to lot. Production teams adjust viscosity and flow according to fabric type, screen mesh, and squeegee speed to ensure print quality for varied end markets.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Used as a dispersant and viscosity regulator, our acrylic polymer supports industrial wastewater clarification and sludge dewatering systems. The product controls floc size, prevents re-agglomeration of fine solids, and optimizes flow during pump transfer and centrifugation. Technicians select dosage according to influent solids content, pH, and downstream separation technology, ensuring efficient pollutant removal and compliant sludge disposal or recovery.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
The polymer acts as a thickener and stabilizer in ready-mix cementitious adhesives, self-leveling underlayments, and repair mortars. It improves workability, prevents segregation, and imparts adjustable flow to pastes and slurries under demanding jobsite conditions. Formulators exploit its performance in high-performance tile adhesives, allowing extended open time and strong adhesion even on vertical surfaces. The product withstands the alkaline environment and endures hydrated conditions post-application.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
This polymer is a critical dispersant and thickener for concentrated suspension agrochemical formulations. It maintains the stability of micronized pesticides and prevents sedimentation during long-term storage and after agitation in bulk tanks. The product functions across a wide pH range and resists aggregation even with high active ingredient loading, allowing consistent dose delivery in field applications via various spraying equipment. Compliance with agrochemical standards ensures safe use for operators and effective crop protection.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Competitive ACUSOL Acrylic Polymer (Thickener / Dispersant) 445N prices that fit your budget—flexible terms and customized quotes for every order.
For samples, pricing, or more information, please contact us at +8615365186327 or mail to sales3@ascent-chem.com.
We will respond to you as soon as possible.
Tel: +8615365186327
Email: sales3@ascent-chem.com
Flexible payment, competitive price, premium service - Inquire now!
Nothing quite compares to the on-the-floor experience you gain over the years in the chemical manufacturing world. From the steady hum of reactors to the precision in neutralization, some products stand out in both handling and results. ACUSOL Acrylic Polymer 445N is one we have relied on and refined, serving both formulators and production teams well. This thickener and dispersant, supplied as an anionic acrylic copolymer, has been the backbone of many cleaning and personal care products around the world. Each batch rolling out of our facility reflects the consistency that only direct manufacturing can guarantee.
Formulators working with household, institutional, or industrial cleaners face a long list of challenges—achieving target viscosity, keeping suspended particles stable, staying clear at everything from low to high pH, and making sure the end product feels and pours right in the customer’s hand. ACUSOL 445N responds well to these daily challenges. As a thickener, it delivers the viscosity boost required, without clumping or “fish eyes,” even when you deal with demanding surfactant systems or wish to push the pH up for performance. Our techs have taken it through dozens of cycles with aggressive builders, tough chelants, and alkaline actives. Time after time, the gel forms strong, then clears as you expect.
Dispersing hard-to-handle particles, like abrasives or mineral fillers, often tests your patience. We designed 445N from the beginning to keep insolubles apart, without letting the blend dry out or go stringy. Granular actives that settle in other systems stay well-dispersed here. This is one reason floor polishes and scouring creams maintain their look batch after batch – the same reason automatic dishwashing gels don’t leave starchy pastes at the bottom.
The ACUSOL 445N model, provided as a clear liquid, usually carries an active solids content of roughly 30 percent. Over years of drum handling and blending, we've found the moderate viscosity essential for both pour-over additions in batch tanks and accurate pump dosings in continuous processing. The pH lands around neutral-to-slightly alkaline (commonly near 7.5 to 8.5), which lets you adjust up or down without battling pre-gelation or resin break. The low odor and acrylic backbone mean that both production workers and end users notice fewer complaints about harsh smells or skin residue.
We’ve seen customers return with tough questions over the years: “Can we push the caustic levels higher?” “Can you help with sequestering calcium, not just boosting viscosity?” “Is this stable through winter shipping?” By opening our process to real-world requests, we have tweaked the 445N design every time. Chemically, our choice in comb structure and cross-linking degree balances between thickening and dispersing action. Run it in a glass cleaner and you’ll get a barely visible boost in clarity with zero settling. Work it into a creamy scrub, and instead of seeing a watery layer form on top, the mixture stays homogeneous long after blending.
Few other acrylic thickeners handle the weird surfactant stacks and active builder loads that keep cropping up with evolving detergent market needs. Where other products flinch in high pH or salt-heavy blends, 445N stands its ground. Bench results rarely surprise our techs because we design, batch, and ship directly, controlling from monomer to final QA.
Over years of trials, nothing tells you more than running a new batch head-to-head with an old industry standby. Many labs have tested both in low and high pH cleaners, phosphate-free dishwashers, and surface sprays. ACUSOL 445N builds viscosity quickly, with no need to fight into solution; it seldom forms fish eyes, which means less lost time in production. Compared to salt-responsive thickeners, 445N is less sensitive to mineral load, which keeps pour-out and bottle-filling fast and regular even when salt curves run high.
Some competitors offer products sensitive to pH; they thicken only above 7, then collapse below 6, which limits where they end up in your finished product line. With ACUSOL 445N, you get real flexibility: the viscosity curve stays relatively flat, even when you drop acidic actives into the mix. This effect cuts waste, since you avoid making separate batches for neutral and alkaline cleaners.
Floor care, hard surface, and dishwashing products all benefit from reliable thickening, but each demands something a little different from the base polymer. Working through hundreds of sample runs, we built 445N around the need for transparency and glide—think glass sprays that don’t streak, polishes that don’t separate, and dish gels that rinse off clean. With the added dispersant features, gritty particles stay suspended, and even hard-to-wet surfaces get even coverage. This keeps risk of separation low, and end-users comment on both the wall-cling and minimal residue.
During shipping, some polymers lump up or require reheating. ACUSOL 445N rides through temperature swings and shipping delays without separating, thanks to both the stabilizing residues selected in the design and the production discipline inside our tanks. We keep an eye on drum yields, and field reports say our polymer pours fast and clean down to the last kilo.
Most manufacturing dilemmas show up not in formulation but on the plant floor. ACUSOL 445N enters mixes without the fluffy dust of powders, cutting risk of airborne mess and helping operators avoid breathing in acrylic fines. Its low foam signature means less deal with degassing or post-process bubble breaks. Dosage control feels precise; techs can tune flow rate or viscosity rise on the spot by shifting pH or swapping builder types.
The liquid form means you skip time rehydrating. Just dose, stir, and move on to the next raw material. This hands-on simplicity translates to smoother shifts and less risk of batch rework or downtime.
Some cleaners draw out the toughest traits from a dispersant; others test the backbone of a thickener. As new actives and chelants come down the supply chain, we’ve spent hours at the mix tanks, keeping notes and switching up build ratios until settling on the right approach. ACUSOL 445N handles aggressive electrolyte loads. Bleach, percarbonate, EDTA and strong caustics can break weaker thickeners. Over several plant runs, 445N avoids precipitation and leaves fewer residues, even as you introduce new surfactants or make after-batch pH swings.
Certain customers need fast rheology changes during filling. With the pH range and dispersancy of 445N, you can steepen or flatten viscosity with basic acid or base tweaks, instead of redesigning the formula. This allows rapid adaptation in process changes or to cover last-minute shifts in raw materials.
Practically every formulator asks about downstream effects these days. Our manufacturing team puts every batch of ACUSOL 445N through stability and degradability checks. The backbone of the polymer resists breakdown in the presence of hypochlorite, hydrogen peroxide, or peroxide bleach, which prevents off-putting odors in hard surface sanitizers.
Our R&D group keeps tabs on the effect of this copolymer in reducing overall microplastic risk. For everyday disposal, such as during bottling washouts or line flushing, 445N lends itself to minimal environmental aftereffects. Its physical stability helps downstream operations avoid filter clogging or downstream tank fouling.
Feedback cycles matter on the manufacturing floor. We listen carefully as seasoned product engineers return with their process and fill performance notes. They tell us if the thickener handles hot spots, if it sheds particles under pump pressure, or crystallizes in cold storage. Their hands-on insights steer the process chemistry more than anything else. Many fine-tuning tweaks in our batches—the addition of a certain preserver, a change in flow rate, a slower-drawn reactor finish—started as feedback tied to real-world hassle. We have stuck with the approach of improving at the source, long before a distributor or reseller interacts with the finished liquid.
Our blend lines run small pilot batches with every run, looking for tell-tale changes in color, shift in flow, or viscosity lag. When a problem crops up, we catch it inside the plant, not at the customer’s tank. This dedication shows up in our low rate of customer-flagged errors and the high number of repeat formulators relying on direct supply.
Put several commercial acrylic thickeners side by side in a production trial, and most plant staff can see, smell, or feel the differences within minutes of mixing. ACUSOL 445N comes out of the drum clear and runs smooth, lacking the sharp chemical scent typical of low-grade acrylics. Some competitors’ versions fail to disperse in cold water, requiring heat or protracted mixing; ours hydrates at ambient conditions, which saves energy and batch time.
Over repeated cycles, off-brand products form stringy gels that stick to tank walls, slow pumps, and demand frequent cleanout; ACUSOL 445N washes down easily and does not cling, reducing downtime. In finished bottles, shelf life runs longer as the polymer avoids haze or color shifts even at higher pH and loadings. This not only keeps manufacturing efficient but ensures store-quality appearance long after production.
Many resins degrade in the presence of bleach or strong alkali, leaving flakes or colored deposits after a month or two on the shelf. ACUSOL 445N keeps its clarity and viscosity stable under the harshest storage conditions. More than a few partners have changed from products that clog their filler nozzles or produce bottle-to-bottle variability mid-shift. ACUSOL 445N brings consistency with the reassurance of a direct supply chain audit—each drum matches our internal production logs and raw material trace.
The move toward concentrated cleaner formats and paraben-free, fragrance-free personal care products places new demands on the base thickener. Our lab teams adjust monomer ratios and test for new chemistries as they become available, always bending formulas to suit evolving market preferences. The backbone of 445N permits flexibility in both base and additive choice. Recent test work included pushing the polymer into new acid cleaners; it resisted breakdown and maintained pourability, even with a heavy acid and surfactant blend.
We routinely run cross-testing with alternative dispersant chemistries, including silicates and more traditional cellulose derivatives. With cellulose, many customers report higher viscosity at the expense of clarity and more challenging mixing characteristics. Silicate thickeners, while robust in some systems, produce haze and slow pouring in most household products. 445N avoids these pitfalls, combining the best of both worlds—fast thickening and high clarity—while delivering on shelf stability and clean process transfer.
Standing over the line as drums fill, you gain an appreciation for taking charge in every stage, from raw monomer procurement to pH balancing and post-preservation. No reselling chain can offer that consistency. We control not only the exact blend in each batch but also temperature, residence time, and every safety measure needed to ship a stable product. Each reacted batch receives hands-on monitoring with in-line viscosity testing and off-line samples frozen for later comparison, allowing us to catch subtle shifts and act early.
By keeping process logs on all plant runs, tracking every deviation, and updating blending ratios based on both performance and customer field reports, we catch and fix issues long before shipment. Our team’s direct connection from production chemist to batch operator keeps accountability strong and the line between R&D and scale-up short. If a partner needs to troubleshoot a hot summer shipment or faces a raw material glitch, we offer advice borne of hundreds of plant runs, not just theoretical support.
Every chemical worth blending must perform predictably not just in the lab, but in the real world of bulk transport, intermediate warehousing, and just-in-time manufacturing. By developing and scaling up ACUSOL 445N inside our own walls, we keep the quality yardstick close. Each tank and drum ships with a history log and performance data connected to that batch, making sure our partners see what we see—same texture, same clarity, same performance—whether the order is 200 liters or 200 tons.
Longstanding customer partnerships come from more than product transactions; they build on open conversations about bad batches, delayed shipments, and unexpected pH drift. Our staff respond with a seriousness honed by daily plant operations, not just promised standards on a spec sheet. This follow-through makes our supply stand out among a crowded field of copycats, third parties, and short-term sources.
Formulators today meet higher expectations for both performance and safety. No one wants to hand-bottle last season's technology, whether on a high-speed filler or a small-batch craft line. We keep this in mind each time our customer support team walks the formulation line, watches pH change in real time, or hears about a recurring viscosity drift in the field. Solutions that work in theory don’t always survive the scale-up, so we keep actual production trials central in our improvement cycle.
With ACUSOL 445N, our investment in plant improvements and regional technical service means every inquiry receives specific, context-driven answers, based in genuine production experience. Asking hard questions about filter plugging, cold endurance, and drum stability—then acting on the findings—has shaped the robust thickener and dispersant we offer today.
While the chemistry behind each polymer can seem complex, the real judgment comes from batch mixers, formulation engineers, and plant workers who use the product daily. ACUSOL 445N rises to their requirements with reliability, stability, and day-to-day ease of use. Our direct manufacturing approach reinforces the end quality, making us a dependable partner for those who focus on product performance and straightforward supply chain relationships.
This is not just a solution for modern cleaning and care—ACUSOL 445N is a culmination of long-standing know-how, careful observation, and a dedication to handling every step ourselves. By keeping hands, eyes, and expertise close to the production line, we guarantee more than just product delivery; we ensure consistent results that experts in the field recognize and trust every day.