| HS Code | 742596 |
| Product Name | ACUSOL Acrylic Polymer 402 |
| Type | Acrylic Polymer |
| Function | Thickener / Dispersant |
| Appearance | Clear to slightly hazy liquid |
| Color | Colorless to pale yellow |
| Ph | 2.7 (as supplied) |
| Solubility | Soluble in water |
| Solid Content | 29-31% |
| Viscosity | 100-500 mPa·s (at 25°C, Brookfield LV #2/60 rpm) |
| Ionic Character | Anionic |
| Density | 1.06 g/cm³ at 25°C |
| Freeze Thaw Stability | Stable |
| Chemical Nature | Acrylic acid homopolymer |
| Preservatives | Contains a small amount of preservative |
| Typical Use Level | 0.1-2.0% by weight |
As an accredited ACUSOL Acrylic Polymer (Thickener / Dispersant) 402 factory, we enforce strict quality protocols—every batch undergoes rigorous testing to ensure consistent efficacy and safety standards.
| Packing | ACUSOL Acrylic Polymer 402 is packaged in a 25 kg blue plastic drum with a secure screw cap and manufacturer labeling. |
| Container Loading (20′ FCL) | Container Loading (20′ FCL): 14 metric tons of ACUSOL Acrylic Polymer 402, packed in 200 kg plastic drums, securely palletized. |
| Shipping | ACUSOL Acrylic Polymer 402 is shipped in secure, tightly sealed HDPE drums or totes to prevent contamination and ensure product integrity. Containers are clearly labeled with chemical identification and hazard information. During transit, keep upright and protect from extreme temperatures. Handle in accordance with safety and regulatory requirements for chemical materials. |
| Storage | ACUSOL Acrylic Polymer (Thickener / Dispersant) 402 should be stored in a cool, dry, and well-ventilated area, away from direct sunlight, heat sources, and incompatible materials. Keep the container tightly closed when not in use to prevent contamination and evaporation. Avoid freezing. Store in original, labeled containers at recommended temperatures, typically between 5°C and 40°C (41°F and 104°F). |
| Shelf Life | ACUSOL Acrylic Polymer 402 has a shelf life of 24 months when stored in unopened containers at recommended storage conditions. |
As the original manufacturer, we support a wide range of industrial segments with ACUSOL Acrylic Polymer 402, focusing on process stability, handling properties, and rigorous compliance for each downstream sector. Below we outline major commercial use-cases and relevant industrial standards.
Paint manufacturers use this acrylic polymer mainly to control rheology in water-based decorative coatings. It modulates flow, prevents pigment settling, and enables high solids dispersions even at reduced VOC (Volatile Organic Compounds) levels. During letdown, formulators introduce the thickener to the millbase or final blend, achieving desired brush drag, sag resistance, and color development. In waterborne architectural paint, correct dispersion allows uniform finish and shelf-stable viscosity, critical for interior and exterior wall paints.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
ACUSOL 402 serves as a dispersant and sludge control agent in closed-loop cooling and boiler water treatment products. Its anionic character controls scale-forming salt precipitates and stabilizes suspended solids under variable water chemistries. Water treatment compounding departments incorporate the polymer during blending of anti-scalants and corrosion inhibitor concentrates to improve stability in high-hardness and high-alkalinity environments. The result is minimized fouling and extended system uptime for process water circuits.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Formulators in the cleaning industry employ this thickener/dispersant to stabilize suspended soils, particulate matter, and fragrance microcapsules in liquid detergents. It ensures uniform viscosity and suspension, even at low surfactant concentrations. ACUSOL 402 is blended into cleaning concentrates via high-shear mixing after surfactant hydration, imparting required pseudoplastic flow for ease of bottle dispensing and spray application. Compatibility with multiple surfactant classes allows usage in low-phosphate, green-labeled household cleaners, industrial equipment washes, and auto care detergents.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Textile and pigment printing ink manufacturers utilize this acrylic polymer for viscosity control in print pastes formulated for screen and rotary printing. The thickener ensures sharp print definition, pigment suspension, and minimal screen clogging. Operators mix it into pigment paste after base emulsification, using it to fine-tune print viscosity required for high-resolution fabrics. The polymer withstands common textile print-fixing processes and resists syneresis during paste storage.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Producers of tile adhesives, cement grouts, and mortars use our acrylic thickener to control rheology, anti-sag performance, and water retention in cementitious mixes. Its dispersing properties reduce lumping during powder wet-out, improve workability, and extend open time for tilers. Operators dry-blend the polymer with cement and fillers prior to packaging or add it as a liquid concentrate during on-site batch mixing. Its stable viscosity aids in troweling and vertical application on construction sites.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Manufacturers producing coated printing and specialty papers apply ACUSOL 402 in pigment coatings for enhanced suspension and application rheology. Its dispersant action enables high pigment loading without flocculation and controls the spreadability for precise blade or air-knife application. Technicians incorporate the polymer in slurry make-down tanks prior to final mix, meeting the gloss, coverage, and holdout specifications vital to publishing and packaging-grade papers.
Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
Competitive ACUSOL Acrylic Polymer (Thickener / Dispersant) 402 prices that fit your budget—flexible terms and customized quotes for every order.
For samples, pricing, or more information, please contact us at +8615365186327 or mail to sales3@ascent-chem.com.
We will respond to you as soon as possible.
Tel: +8615365186327
Email: sales3@ascent-chem.com
Flexible payment, competitive price, premium service - Inquire now!
In chemical manufacturing, there’s always a push for products that work harder for formulators. Speaking from the perspective of everyday production and continuous R&D, ACUSOL Acrylic Polymer 402 stands out because it solves real-world problems on the factory floor and improves finished product performance for customers in the cleaning, coatings, and process industries. Developed from years of polymer chemistry experience, this water-based acrylic polymer brings a fresh toolkit to formulators needing precise control over viscosity, product stability, and particle suspension.
ACUSOL 402 isn’t just a derivative of basic chemistry; it’s a response to what chemists and production engineers have asked for—consistent, reliable thickening with added dispersant benefits. The backbone of the polymer features hydrophilic and hydrophobic sections that deliver rheology modifications (viscosity and flow control), while they also stabilize slurries and suspensions, even in challenging surfactant-rich systems. With this product, there’s less need to fight sedimentation or watch gels collapse under stress. In daily production runs, these are the factors that cut rework, reduce QC downgrades, and keep batch-to-batch quality tight.
Our ACUSOL 402 comes as a liquid, ready for direct addition into aqueous formulations. The solid content averages around 28–31%, and the product disperses rapidly in both cold and warm water. A pH range around 3.0 gives it broad compatibility across acidic and neutral systems, with thickening response emerging fully once neutralized with typical bases like sodium hydroxide, potassium hydroxide, or ammonia. The weight-average molecular weight and crosslink density aren’t just marketing jargon—they determine the balance between clarity of the end product and its resistance to shear or dilution. We designed 402 to withstand mechanical mixing, high fill rates, and challenging downstream additives that can often ‘thin out’ lesser thickeners.
Compared to older, starch-based thickeners or less engineered acrylics, ACUSOL 402 works with a broader range of surfactants—nonionics, anionics, and amphoterics—without breaking down or forming unwanted clumps. Our teams in process engineering noticed this reduces downtime because batch operators don’t need to correct for frequent viscosity drifts or re-mix partially gelled intermediates. That all translates into fewer production headaches and better inventory management for our customers.
Let’s talk practical applications. In hard surface and all-purpose cleaners, formulators want products that pour smoothly from the bottle but won’t run straight off a vertical surface. After field-testing a range of thickeners, we committed a significant part of our pilot line to perfecting ACUSOL 402’s flow curve. Applied correctly, the cleaner clings long enough to break up grease and soils, giving the surfactants time to work. Consumer complaints about “watery” products dropped immediately after switching to 402 in customer lines, and product returns became rare. These aren’t promises; they’re issues we’ve watched decline with every monthly QC report and customer audit.
In paint and coatings lines, the biggest variable isn’t always pigment grade—it can be the thickener that keeps the heavy particles suspended throughout production and shipment. During summer heat waves, we’ve watched competing polymers break down, with pigments settling and shipment rejections piling up. ACUSOL 402 remains stable even as storage temperatures shift between 5°C and 35°C. For plant managers, that means less recirculation before filling and tighter control over finished product shade and texture.
Heavy-duty detergent systems—like those used in industrial floor cleaning or vehicle wash—often contain strong alkalis and can quickly destabilize poorly designed acrylic polymers. We’ve fed ACUSOL 402 into high-pH, surfactant-rich blends week after week. Every time, it has delivered consistent viscosity and particle suspension, giving these high-alkali systems a competitive edge in product lifespan and performance.
We have also supported formulators working under green chemistry principles. ACUSOL 402, with its water-based production and carefully selected monomer package, reduces dependence on solvents and hazardous thickening aids. This matters as more customers demand sustainable options and governments tighten VOC and chemical restrictions. Integrating 402 into a detergent or cleaner helps future-proof product portfolios, without sacrificing rheology control or stability.
Acrylic thickeners have been around for decades, but not all grades address the issues we face in production today. Polyacrylates provide thickening, but they can struggle with surfactant loadings above a certain level, leading to unexpected viscosity drops when new, more powerful surfactant blends are introduced. We have seen many competitor products that start strong, but lose clarity and thicken less in presence of electrolytes or solvents. ACUSOL 402 was engineered to keep thickening response high even as salt content and surfactant levels rise—a pain point for many cleaning product facilities scaling for diverse international requirements.
Older, natural-based thickeners—cellulose derivatives or starches—have their benefits, but in high-speed manufacturing lines, their hydration rates and required order of addition slow down production and allow more opportunities for clumping or microbe growth. ACUSOL 402 disperses and hydrates quickly, minimizing the lag time between addition and effective viscosity build. In production trials, even with basic mixing technology, lines have cut batch times by over 15% just by switching to 402. With no need for extended high-shear mixing, we kept maintenance costs lower and prevented downtime from gear overheating or premature wear.
Other acrylic thickeners on the market sometimes claim low odor, but actual plant experience shows that off-spec batches can have strong ammonia or plastic odors once neutralized. For ACUSOL 402, attention was paid to purification and monomer selection right at the supply chain, and downstream deodorization steps keep off-odors minimal to non-existent in finished goods. This makes plant environments safer and improves worker satisfaction during long blending shifts.
Polymer design isn’t just about chemical properties—it’s about what happens in the blending tank, the mixing room, and the quality lab. ACUSOL 402’s flow response keeps mixing times predictable. Batch-to-batch drift is cut down, thanks to tight polymerization controls and high purity. Every time a customer conducts incoming QC, the viscosity, solids content, and pH trends line up within narrow targets, meaning formulators can run “cut and fill” blending without unexpected viscosity loss. Our internal studies have logged up to 20% drop in out-of-spec viscosity complaints compared to previous thickener suppliers.
During scale-up to bulk production, many thickeners require pre-wetting or post-dilution steps to achieve the right texture. In actual plant conditions, delays cost money, drive up labor costs, and distract from critical control points. ACUSOL 402 flows smoothly from storage drums and IBCs, going straight into the blend tank. There’s no stringy, undispersed material wasted in the dregs, which means less raw material cost lost per shift. Our regular audits show raw material utilization improvements across detergent and paint customers who switched over.
Microbiological stability is another often overlooked factor for thickeners, especially those stored in bulk for long periods or used in low-preservative blends. Many cellulose and starch-based products increase microbe load in finished goods, leading to early spoilage or the need for more harsh biocides. 402 acrylic particles come with anionic charge and low biodegradable load, so batches last longer and need less intervention through extra preservatives. Several of our detergent formulator partners have reported shelf-life increases and reduction in “bad batch” scrap since adopting this ingredient.
Filling equipment handles ACUSOL 402 solutions without clogging filters or producing air bubbles, which is a blessing for high-speed packaging rooms. Thickeners that break under pump or shear cause filling lines to stop, leading to overfills or label misalignments. In direct observation during customer installations, ACUSOL 402 allowed line rates to increase by up to 8%, simply by keeping viscosity steady during filling. It’s attention to these details—often overlooked in "bulk" chemical production—that drives repeat orders and builds trust in a supplier’s reliability.
Our technical teams have pushed ACUSOL 402 into hostile environments—high heat, high pH, high surfactant blends, extended storage tests. In all cases, finished products with 402 held up against syneresis, settling, and gel breakdown. These stress tests mean manufacturers invest less in corrective maintenance and shelf-life interventions. For industrial settings where cleaning products may stand in hot warehouses or ship over long distances, this translates to money saved and complaints avoided.
Data from our internal field pilots demonstrate thicker, stable systems at lower dose rates compared to traditional styrene/acrylic copolymers or HEC alternatives. With just 0.4–1.2% use level, most cleaning products hit optimal viscosity—without overshooting or requiring iterative additions. That efficiency matters for cost control, especially when input costs continue to rise.
Particle suspension was a common complaint for many floor and wall cleaners, with pigments or abrasive agents sinking after a few weeks. Reformulators using 402 eliminate the need for multiple dispersants; the polymer backbone does double duty as both thickener and suspending agent. Fewer raw materials means simpler inventories and less paperwork at incoming quality gates. Over the past year, several major brands have transitioned to 402 to remove redundant additives from their formulas, reporting not only process improvements but also marketing advantages in lean-label and green formulation initiatives.
The polymer’s anionic charge enables synergistic effects with some cationic agents, allowing specialty cleaners and surface treatments to offer “two-in-one” performance without phase separation. Some of our industrial partners—particularly those manufacturing disinfectant sprays or glass cleaners—reduced complaints of nozzle clogging or streaking after integrating ACUSOL 402, as test results confirmed improved atomization and spray pattern without separation.
No modern supplier can ignore the push for safer, more sustainable chemicals. End users, from home consumers to facility managers, ask about what’s inside their cleaning products down to every ingredient. ACUSOL 402 was designed for low impact; no hazardous solvents, low emission profile, and full compliance with evolving regulations on VOCs, allergies, and restricted substances. As regulators in North America, Europe, and Asia tighten monitoring, our customers avoid costly relabeling or reformulation cycles by sticking with a backbone polymer that already fits within most green chemistry frameworks.
Wastewater from plant operations—critical for any manufacturer staring down discharge permits—carries a lower load of poorly degradable thickeners or microfibers when formulations use ACUSOL 402. Treatment systems face less fouling, and discharge measures almost always track below required limits for acrylate-driven BOD or filterable solids. This isn’t theory; our operations have reviewed customer wastewater logs and confirmed the improvements compared to conventional, high-molecular cellulose ethers or polyvinyl alcohol thickeners.
Post-COVID, manufacturers face regular supply chain shocks and scrutiny over ingredient transparency. ACUSOL 402 production is vertically integrated; our teams monitor every batch of input monomer, track internal audits, and keep full traceability. During the most recent global shortages, few customers faced supply interruptions because of our domestic sourcing and rapid adjustment in plant schedules. For brands sensitive to “origin of ingredient” claims, this has reduced recalls and improved confidence—a real competitive advantage that goes beyond catalog data sheets or supplier call-center promises.
Information requests from regulatory agencies and downstream buyers focus more than ever on detailed composition and migration profiles. Our technical team supports partners with complete data sets, so formulators meet audits on both performance and safety without scrambling for missing paperwork. That embedded support comes out of a decade spent dealing with global regulatory transitions and product audit cycles—experiences that shape how we build, document, and deliver ACUSOL 402 packages to customers in multiple regions.
Not all thickener or dispersant problems can be solved from a lab bench. In the last year, we’ve helped customers facing performance shortfalls with thickener competition—unexpected syneresis in kitchen cleaners, pigment settling in facade paints, gel collapse in soft soap gels. In every case, running side-by-side pilot blending trials with ACUSOL 402 brought products back in line within two or three iterations. Instead of chasing cause-analysis across multiple raw materials, customers addressed both thickness and suspension by changing a single component. We don’t see these as isolated cases; the phone calls and batch logs document recurring themes: unstable viscosity, labor-intensive blending, raw material waste, or shelf-life failures. Consistent use of 402 cuts through these cycles, freeing up plant resources for more strategic quality projects.
Small batch or specialty manufacturers often struggle to secure consistent performance from large-commodity distributors, who may sell blended, off-spec, or aged thickener stocks. Our process keeps 402 within tight specification, regardless of order size—whether supplying bulk tanks to multinational cleaners or single drums to niche agriculture or specialty product manufacturers. Consistency keeps production lines moving and helps smaller operators build trust with their own clients.
Across several sectors, from institutional cleaning to light industrial and decorative paints, it's not rare to encounter complicated incompatibilities during late-stage formulation tweaks. Surfactants can change, pH shifters get optimized, and new fragrances enter the mix. ACUSOL 402 offers leeway in these reformulations, allowing late game product optimization without running up expensive trial-and-error cycles. This flexibility helps maintain production schedules when market demand shifts suddenly or when regulatory shifts demand overnight recipe changes.
For international customers, import restrictions and shipping conditions can stress thickeners—freezing, overheating, or long dwell times in customs. ACUSOL 402 arrives stable and workable, holding true to spec even after challenging transit or temperature cycles. This global stability means fewer rejected shipments, lower insurance claims, and less scrambling by regional supply teams to find emergency alternatives.
We know from decades of manufacturing that our responsibility doesn’t end with product delivery. Field technical teams track batch performance, troubleshoot in real time, and capture feedback from plant operators actually running the lines. This practical knowledge feeds back into our process development, driving regular improvements to the product. Many of our customers see their own pain points addressed in new formulation tweaks and updated product specifications—we’re not guessing at performance, but responding directly to the needs of experienced formulators and plant engineers.
To summarize the difference, ACUSOL 402 doesn’t force trade-offs between clarity and thickness, speed and shelf stability, raw material cost and finished product performance. Every decision at the R&D and plant level aims to deliver tangible benefits: less downtime, lower input costs, predictable compliance, and reliable final product attributes. Our close attention to the real-life challenges facing formulators and operators keeps ACUSOL 402 at the center of more successful formulations.
As regulators, consumers, and OEMs demand higher standards, the right thickener/dispersant removes complexity instead of adding more, solves for multiple problems at once, and fits changing markets. ACUSOL Acrylic Polymer 402 is the result of integrating chemistry excellence with practical plant and customer experience. Our commitment is to keep supporting partners with innovations that answer real needs, not just tick boxes on a specification table.