Dow Inc

Products

ACRYSOL Rheology Modifier / Thickener DR-130

    • Product Name: ACRYSOL Rheology Modifier / Thickener DR-130
    • Chemical Name (IUPAC): Poly(oxy-1,2-ethanediyl), α-(carboxymethyl)-ω-(9-octadecenyloxy)-, (Z)-
    • CAS No.: 119313-12-1
    • Chemical Formula: Acrylates/Steareth-20 Methacrylate Copolymer
    • Form/Physical State: Liquid
    • Factroy Site: Yudu County, Ganzhou, Jiangxi, China
    • Price Inquiry: sales3@ascent-chem.com
    • Manufacturer: Dow Inc
    • CONTACT NOW
    VTB
    Specifications
    HS Code 656874
    Product Name ACRYSOL Rheology Modifier / Thickener DR-130
    Chemical Type Hydrophobically Modified Alkali Swellable Emulsion (HASE)
    Appearance Milky white liquid
    Ph 2.5-4.5
    Solids Content 28-32%
    Density 1.05 g/cm3
    Ionic Nature Anionic
    Viscosity 50-1000 mPa·s (Brookfield, RVT, 25°C)
    Solubility Dispersible in water
    Recommended Use Level 0.2-2.0% by weight (on total formulation)
    Application Fields Architectural paints, coatings, adhesives
    Freeze Thaw Stability Protect from freezing
    Storage Temperature 5-35°C
    Compatibility Compatible with most latex binders
    Stability Stable under normal storage conditions

    As an accredited ACRYSOL Rheology Modifier / Thickener DR-130 factory, we enforce strict quality protocols—every batch undergoes rigorous testing to ensure consistent efficacy and safety standards.

    Packing & Storage
    Packing **ACRYSOL Rheology Modifier / Thickener DR-130** is supplied in a 200 kg blue HDPE drum with secure, tamper-evident closure.
    Container Loading (20′ FCL) Container Loading (20′ FCL) for ACRYSOL Rheology Modifier / Thickener DR-130: 16 MT packed in 160 drums (net 200kg/drum).
    Shipping **Shipping Description for ACRYSOL Rheology Modifier / Thickener DR-130:** ACRYSOL Rheology Modifier / Thickener DR-130 is typically shipped in tightly sealed, high-density polyethylene (HDPE) drums or intermediate bulk containers (IBCs). Ensure containers are upright, protected from freezing, and handled to prevent leaks or spills. This product is non-hazardous but should be transported according to standard chemical shipping protocols.
    Storage **ACRYSOL Rheology Modifier / Thickener DR-130** should be stored in the original, tightly closed containers in a cool, dry, and well-ventilated area away from direct sunlight and sources of heat or ignition. Avoid freezing and exposure to extreme temperatures. Keep containers upright to prevent leaks. Follow all relevant safety guidelines and consult the product’s safety data sheet (SDS) for detailed storage recommendations.
    Shelf Life ACRYSOL Rheology Modifier/Thickener DR-130 has a recommended shelf life of 24 months when stored unopened in original containers.
    Application of ACRYSOL Rheology Modifier / Thickener DR-130

    Applications of ACRYSOL Rheology Modifier / Thickener DR-130 in Industrial Manufacturing

    We produce ACRYSOL Rheology Modifier / Thickener DR-130 for global industrial clients focused on consistent flow control in complex formulations. Below are major downstream sectors that adopt DR-130, each with its specific compliance, dosage, process steps, and end-product outputs, based on actual factory use cases and application feedback.

    1. Architectural and Decorative Paints

    Architectural and decorative coating manufacturers rely on DR-130 to attain precise viscosity adjustment for waterborne latex paints and primers. This additive enables targeted thickness and leveling in wall paints, helping formulators balance opacity with sprayability and roller application while ensuring sag resistance. Formulators must align recipes with diminishing VOC targets, mandated biocide levels, and requirements for anti-settling during warehouse storage.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    2. Water-based Adhesives and Sealants

    Adhesive producers formulate DR-130 into PVA-based wood glues, paper laminating adhesives, and construction sealants to achieve consistent viscosity and tack throughout production, filling, and end-use. The thickener maintains body and spreadability, avoiding filler sedimentation and slump in bead application, with tight process monitoring for adhesive open time and bond strength, especially in automated lines.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    3. Textile Printing Pastes and Binders

    Textile processing facilities incorporate DR-130 in aqueous pigment pastes, dispersions, and binders to control print definition, screen runability, and fabric penetration. The rheological profile is critical to preventing sag and bleeding during rotary or flat-bed screen printing, especially with high-speed machinery and fine mesh screens intended for detailed pattern work on cotton and synthetics.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    4. Industrial Water Treatment Formulations

    Water treatment chemical blenders use DR-130 to impart shear-thinning viscosity to liquid flocculant and coagulant blends, supporting blend stability and precise dosing in recirculating industrial water systems. The modifier limits solids sedimentation in storage, enhances pumping accuracy, and sustains chemical dispersion during bulk water clarification in metalworking, mining, and municipal wastewater plants.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    5. Building Materials: Cementitious Tile Adhesives and Grouts

    Tile adhesive and grout formulators utilize DR-130 for flow regulation, enabling the design of non-sag, easy-to-trowel pastes with enhanced open time and slump resistance for tile installation. Uniform viscosity ensures easy mix-application by contractors, notched trowel control, and correct substrate wetting, especially for vertical tiling and mosaic grout application on commercial sites.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    6. Industrial Inks for Paper and Board Printing

    Commercial ink manufacturers incorporate DR-130 into aqueous flexographic and gravure formulations to fine-tune print viscosity, prevent pigment flooding, and enable controlled transfer at high print speeds. This ensures crisp image quality and dot sharpness on coated and uncoated substrates, facilitating defect-free runs and rapid cleanup in packaging and label printing lines.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    Free Quote

    Competitive ACRYSOL Rheology Modifier / Thickener DR-130 prices that fit your budget—flexible terms and customized quotes for every order.

    For samples, pricing, or more information, please contact us at +8615365186327 or mail to sales3@ascent-chem.com.

    We will respond to you as soon as possible.

    Tel: +8615365186327

    Email: sales3@ascent-chem.com

    Inquiry

    Get Free Quote of Dow Inc

    Flexible payment, competitive price, premium service - Inquire now!

    Certification & Compliance
    More Introduction

    ACRYSOL Rheology Modifier / Thickener DR-130: Shaping Performance in Paint and Coatings Formulations

    Getting Consistent Results in Every Batch

    In the business of chemical manufacturing, especially in acrylic thickeners, the gap between a reliable product and a problematic one can become very clear on the production line. Over the years producing rheology modifiers, I've learned how a single ingredient will impact the way a paint flows, applies, and dries. ACRYSOL Rheology Modifier DR-130 stands out not by promising everything to everyone, but by simply delivering the level of thickening that serious water-based coating formulators expect. With DR-130, we offer a product that's built to handle real-world demands on both the machine and the finished surface.

    Product Basics Shaped by Experience

    Every batch of ACRYSOL DR-130 comes from manufacturing know-how tuned over hundreds of production runs. DR-130 arrives as a liquid acrylic polymer. Its composition and viscosity profile result from detailed process controls—monomer ratios, neutralization rates, emulsion polymerization temperatures—all dialed in to create a thickener that cooperates in a wide range of water-based paint recipes.

    We've handled all sorts of requests from clients who need a modifier to raise mid- to high-shear viscosity, one that won’t sag off corners or slump down vertical surfaces, one that makes sure pigment stays evenly spread without settling or running. DR-130 answers those needs with a balance of flow and body that is tough to replicate. It’s different from older cellulose or synthetic powders in more ways than just its liquid format. It blends rapidly into the mill base, tolerates a broad pH range, and holds up during letdown. That saves time on the floor and helps our customers keep productivity high.

    How DR-130 Eases Formulation Challenges

    Working with dozens of coating producers, I’ve seen how a thickener creates ripple effects throughout a formula. One issue that keeps coming up involves edge drag and film leveling. With inconsistent thickeners, patches and ridges pop up, and brush marks become hard to avoid. By keeping rheology control predictable at both low and high shear rates, DR-130 builds structure without giving a paint the sticky, grabby feel of older thickeners. People using sprayers, rollers, or brushes notice less spattering. Painters see an easier cut-in and a more even film.

    I remember a line supervisor once telling me the pain of using powder thickeners: dust clouds, packing issues, stubborn clumps—even after hours on the dissolver, he’d end up fishing out “jelly-fish lumps” when the batch hit letdown. DR-130, delivered as a pumpable dispersion, eliminates the mess and all those surprises. Just pour or meter the right dose, recirculate, and see a smooth blend right away.

    Specifications that Matter in the Factory

    Some people obsess over specs for the sake of it. Here, we focus on parameters that really drive results: viscosity at different shear rates, compatibility with common binders and surfactants, and shelf stability under realistic warehouse conditions. DR-130 maintains storage stability for months, so quality doesn't drift over time. We've engineered it for rapid viscosity development, which means formulating teams can dial in the consistency they want without pushing pH to extremes or adding secondary biocides.

    Paint makers working with vinyl acrylic, styrene-acrylic, or pure acrylic emulsions often need a modifier that keeps systems flowing yet stands up on vertical walls or edges. Our own experience has shown that thickeners with the wrong molecular weight profile make paints too thin—think drips on roller trays and poor hide on rough surfaces—or too gelatinous, fouling equipment and creating waste. DR-130 hits the target for sag resistance, open time, and brushability, especially in low-VOC and low-odor formulas where solvent-based modifiers are not allowed.

    Performance Under the Hood: Real-World Results

    We’re not theorizing in a vacuum: DR-130 goes through repeated full-scale plant trials. Large paint manufacturers send us samples from their own lines, then share feedback after multiple days of use. I remember working side-by-side with a technical service rep in a busy coatings plant. A batch using DR-130 went through high-speed dispersion, tinting, filtration, and can filling—all without skinning, gelling, or foam buildup. Stopping the line because of a failed batch costs more than any raw material ever could, so consistency matters.

    In formula optimization, DR-130 delivers both body and leveling. From architectural interior paints to exterior wall coatings, it controls sag and viscosity drift (common headaches). In anti-corrosive primers, pigment is held in suspension, even after months of storage. Wood coatings and industrial finishes get sheen uniformity and gloss retention. For tint bases, colorants mix in evenly, since DR-130 doesn’t shock the system like many high-activity powders often do.

    Customers frequently ask about thickener impact on rheology curves—especially for spray application or dip coating. We've measured the viscosity profile of DR-130-modified paints from ultra-low shear (bucket test) to high-speed application, and results confirm DR-130 doesn’t just plump up the mix at rest or collapse on a wall. It follows the hand and tool, creating the glide that experienced applicators appreciate.

    Clear Differences: DR-130 Versus Other Thickeners

    It’s easy to get lost in catalog numbers and table after table of competing “me-too” thickeners. We’re always asked: “So what’s actually different about DR-130?” Feedback from daily plant use keeps us honest here.

    In the past, many waterborne coatings used cellulosic ethers. Those powders can work, but they often generate “false body”—a short, sticky feel with poor flow. Cellulose sources also break down—yellowing, turning grainy, or even feeding bacteria if the batch faces storage heat or microbiological stress. DR-130, made as a synthetic acrylic, resists breakdown and keeps its original properties for a long shelf life. That matters when paint sits in a hot warehouse or ships in containers for months.

    Other synthetic thickeners might bring up viscosity, but with surfactants and coalescent agents changing every year, formula compatibility really matters. Some products thicken only at high pH, or only after spending hours dissolving, or only if you hit a narrow temperature window. DR-130 cuts those limitations out of the process. I've seen customers switch over and cut batch processing time, lose fewer batches, and eliminate tweaks downstream. Customer labs have confirmed DR-130’s compatibility with common pigment dispersants, defoamers, and a wide range of resin technologies—key for manufacturers juggling multiple end-use requirements.

    Another important difference comes in sustainability and user safety. DR-130 is developed with low VOC content and can support Green-Label, low-odor paint formulas. For plant workers, this reduces exposure to hazardous raw material dusts and volatile solvents. Our production team has invested in closed transfer pumping and automated dosing, taking guesswork and most workplace risks out of the mixing step.

    Making a Measurable Impact: From Lab to Line

    One common frustration among coatings chemists is the lab-to-line gap. Tiny batches in a beaker can behave perfectly, but when scaling up to thousands of gallons, many thickeners break down, separate, or interact with resins in unexpected ways. We test DR-130 at production volumes, using water qualities, heat, and mechanical shear that replicate real-world mixing. The feedback loop between shop floor and R&D means every refinement gets pressure-tested by fellow manufacturers, not just theorized at the bench.

    We’ve also worked with batch automation engineers who want thickeners to blend in quickly and consistently, not force manual “patching” at the end. DR-130’s pumpable dispersion form means accurate dosing through automated controls. This cuts raw material loss, reduces downtime, and leads to tighter OEE (overall equipment effectiveness) metrics—a win for busy contract manufacturing lines.

    Packaging teams don’t get left behind, either. Since DR-130 mixes at moderate temperatures and tolerates recirculation and transfer via standard hose and pump systems, it fits smoothly into bulk or IBC-based workflows and avoids choking bag filters. Those little details matter for factory throughput and reduce operator frustrations.

    Stability, Shelf-Life, and Reducing Returns

    Returns and complaints cost time and trust. Finishers have no patience for paints that settle out, skin over, or change texture in storage. Having produced, tested, stored, and shipped DR-130 in all kinds of climates and warehouse conditions, I can say confidently it keeps its promise on shelf-life. Paints thickened with DR-130 maintain stable flow, openness, and appearance from production to point of use—whether that’s a makeshift shed or a major retail chain’s warehouse.

    We see this as more than just technical backup—it’s protecting the end user’s experience and preserving our brand reputation down the distribution line. Some manufacturers who made the switch to DR-130 reported a noticeable drop in product returns and on-site adjustments, improving their bottom line and keeping headaches off the service hotline.

    Supporting the Shift to Low-VOC and Sustainable Paints

    The push is clear—end users and specifiers ask for coatings without harsh solvents, low odors, and improved indoor air quality. DR-130 supports these shifts with a chemistry that shows negligible VOC emissions and leaves out legacy solvent carriers. For waterborne acrylic and vinyl paints aimed at green certification, DR-130 has “clean label” credentials and meets emission limits in sensitive settings like schools, hospitals, and homes.

    More importantly, plant staff like using it: DR-130 skips the hazards of alkali powders and harmful fine dusts, fitting directly into liquid dosing and pumping systems. The environmental footprint shrinks further by minimizing rework, batch failures, and off-spec disposal. That’s a benefit we see through the full product lifecycle—from raw material to warehouse to landfill diversion.

    Taking Customer Input Seriously

    Continuous improvement starts with transparent feedback. Over the years, we’ve fielded field trial reports, packaging insights, and plenty of blunt comments about what works and what stands in the way on the plant floor. At industry technical conferences, we present data from pilot-scale trials and case studies, but we also listen hard. Coatings manufacturers told us they wanted less foaming, easier compatibility with varying pH and resin systems, and tighter control over viscosity drift through the life of the paint, especially after tinting or long storage.

    In response, we’ve adjusted DR-130’s polymerization method and surfactant package over several production cycles, always validating changes through both lab and at-scale runs. Our technical team stands ready to help customers troubleshoot issues—whether it’s a sudden drop in sag resistance or unforeseen interaction with a new pigment package. Nobody wins if thickeners slow down a line or give painters surprises in the field.

    From Raw Material Sourcing to Finished Product

    Having full control of the manufacturing line—from monomer sourcing through polymerization to filling—makes a big difference. It gives us the traceability and process control that outsourcing and private-labeling just can’t match. DR-130 isn’t a white-label commodity blended to order; each production lot carries batch records, process logs, and full QC analytics linked to its performance profile.

    We deal directly with key monomer suppliers and vet every additive to make sure it lines up with both customer requirements and regulatory changes. The result? DR-130 reflects not just a catalog number, but a depth of accumulated plant and application experience. Every shipment comes with our own tested guarantee—not just a distributor’s or reseller’s assurance.

    Chemistry that Supports Tomorrow’s Coating Advances

    Coating technology keeps changing: new binder chemistries, surface modifiers, anti-microbial additives, and regional regulatory limits keep everyone on their toes. DR-130’s formulation has already survived several waves of reformulation—from ammonia-free batches for green-label lines, to systems that demand high water and freeze-thaw stability.

    As more paints push the boundaries—higher solids, faster open time, improved color performance—thickener chemistry becomes part of the solution, not the problem. We routinely test DR-130 alongside leading competitive brands and measure customer recipes in our facilities using the same instrumentation and controls the industry relies on.

    We’ve seen DR-130 lift paint performance from budget lines to premium systems, supporting robust hiding power, easy recoat, and broad pigment compatibility. It’s not just about the specs—it’s about the outcome on the wall, the machinery uptime, and the painter’s hands.

    Our Commitment to Reliable Solutions

    At the end of the day, manufacturing thickeners like DR-130 is about real accountability, not just chemistry. From batch planning and logistics to after-sales support, our entire staff stands behind the product. Decades of production experience taught us that keeping lines running smoothly takes more than just formulas and datasheets—it takes a close eye on every link in the production chain. If there’s an issue, we fix it; if there’s a better way, we pursue it.

    ACRYSOL Rheology Modifier DR-130 isn’t a theoretical blend or the output of some faceless commodity line. It represents a manufacturer’s commitment to performance, transparency, and ongoing improvement. As coatings demand more—on the wall, in the warehouse, and on the production line—we aim to provide solutions shaped by hands-on experience and backed by real results. That’s what manufacturers, painters, and end users deserve.